When i am trying to shutdown the database it is not recognising it.It is giving error.
SQL>shutdown immediate unknown command beginning "shutdown i..." - rest of line ignored.
I am passing this command on Sql prompt.So i don't think problem in setting ORACLE_BASE,ORACLE_SID.
we are running SAP application against oracle database. say, if I use brspace or brtools (from SAP side) to shutdown or startup database or collect stats, does this mean it not recommend to use oracle command to shutdown/start & collect stats?
View 3 Replies View RelatedI recently installed Oracle 10g on my windows Xp laptop. It has become considerably slow since then. I want to start the database server only when I need it, and not every time I start my laptop. I looked around in OEM and did found a way.
View 5 Replies View RelatedWhen I am trying to connect to sql from scott or any other user i am getting this error message ,
ORA-01033: ORACLE initialization or shutdown in progress
I have been getting this error message for 4 four days . Butt when i am trying to connect from SYS user it connects successfully ,but when i do query it gives me following error message .
ORA-01219: database not open: queries allowed on fixed tables/views only
I shutdown Database from SYS user ,and start it again .But at startup it gives me following error message .
ORA-00204: error in reading (block 3, # blocks 8) of control file
ORA-00202: control file: 'D:ORACLEPRODUCT10.2.0ORADATAORCLCONTROL03.CTL'
ORA-27091: unable to queue I/O
ORA-27070: async read/write failed
OSD-04006: ReadFile() failure, unable to read from file
O/S-Error: (OS 23) Data error (cyclic redundancy check).
when i am using sql prompt and enter username and password scott and tiger it is giving error ORA-01033 oracle initialization or shutdown in progress.
View 9 Replies View Related My database was working fine and now I am not able to login and getting the error:-
"ORA-01033: ORACLE initialization or shutdown in progress"
I have done the below steps:
SQL> shutdown immediate
ORA-01109: database not open
Database dismounted.
ORACLE instance shut down.
SQL> STARTUP
ORA-32004: obsolete and/or deprecated parameter(s) specified
[code]....
We have changed the SYSDATE to 03-FEB-1994 in our AIX machine where oracle11g database is running. Once the sysdate is changed db and listner are getting down immediately and its generating the core in $ORACLE_HOME/dbs
This AIX machine is for PT test and as per one requirement we are changing the sysdate. Moreover, we found that database is getting down if we change the sysdate till 1999. If we change the sysdate to 2000, then we are not seeing any issue.
Below point is for additional info. After changing the sysdate and trying to connect to the db user, we are getting the below issue.
$ sqlplus '/as sysdba'
Segmentation issue (Core dump)
I have installed oracle 11g Release 11.1.0.1 on windows server 2008.I access this server from a client machine running on winXP through SQL PLUS. I wanted to shutdown and start DB server from this client machine. Accordingly i issued shutdown immediate command from SQLPLUS.
Now when i tried to start the DB with "STARTUP NOMOUNT" command i received error 12514. I understand this error means that the listener received a request to establish connections to a database but since DB services are not up and running, hence the error. So my first question is how do I resolve this error.
Continuing further, i tried to re-connect to the database as sys, and i received another error ORA-01041. So, my second question is why did i receive this error and again how can i resolve it
may be you can point me to relevant reference in Oracle documentation) how can i start and stop oracle from a client machine using SQL interface in CLI mode and windows environment and avoid this error.
I issued a SHUTDOWN IMMEDIATE command on my database and for over 2 hours and got no response. I did this because I wanted to restart the database due to many hanging sessions which had led to high CPU usage on the server by oracle process.
Oracle Service<dbname> instance using the Windows Services screen which failed with an error 1053 message. At the same time I got an ORA-01013 message saying user requested cancel of operation. See below:
SQL> SHUTDOWN IMMEDIATE
ORA-01013: user requested cancel of current operation
SQL> SHUTDOWN IMMEDIATE
ORA-01089: immediate shutdown in progress - no operations are permitted
SQL> SHUTDOWN ABORT
ORA-24324: service handle not initialized
ORA-01041: internal error. hostdef extension doesn't exist
What I want to know is how do I proceed? Also how do I check to see the status of the Shutdown operation?
We have 2 Unix SunOS server, named as SUNOS01 and SUNOS02, there is some space need to add in SUNOS02 and for that I have to bring Database down on SUNOS02. When I checked I found that the DB is pointing to SUNOS01, i.e. there is no DB on SUNOS02, So, Do I required to shutdown the DB on SUNOS01 or it is not required to do anything from Database side. I mean to say should I ask Unix team to bring down the unix server and add the space.Also, if DB shutdown is not required then what I have to do afetr they have added space and bring the server up from DB side.
View 4 Replies View RelatedI want to shutdown the database using shutdown immediate and startup the database using startup mount.
1.)My system is client system if I connect start--> program -->Accessories --> communication --> Remote Desktop connection (connect server system) , open Run type cmd after
Shutdown immediate (database is shutdown)
Startup mount (database is mounted no problem it's working fine)
2.) But if I, open Run type cmd in client system If I run same command, I'm getting below error (ORA-12560: TNS:protocol adapter error).
C:>set oracle_sid=dbadb
C:>sqlplus / as sysdba
SQL*Plus: Release 10.1.0.2.0 - Production on ╘± ╠ß± 31 18:09:27 2009
Copyright (c) 1982, 2004, Oracle. All rights reserved.
ERROR:
ORA-12560: TNS:protocol adapter error
[code].....
3. If I run same command in Sql Plus I'm getting below error(ORA-12514: TNS:listener does not currently know of service requested in connect descriptor).
SQL*Plus: Release 10.1.0.2.0 - Production on Ôñ Ìáñ 31 18:23:13 2009
Copyright (c) 1982, 2004, Oracle. All rights reserved.
Connected to:
Oracle Database 10g Enterprise Edition Release 10.1.0.2.0 - Production
With the Partitioning, OLAP and Data Mining options
[code].....
i mean can i write a trigger to prevent shutdown in certain time.
create or replace trigger trig1 before shutdown on database begin if to_char(sysdate,'hh24') <16 then 'what is the right thing to do here?'
I am upgrading a DB using catupgrd.sql, and one of the prerequisites is to shut down the listener. Now, I have multiple database instances registered with this listener, and I don't want the other ones to become unavailable while I do the upgrade. Is there any way to do this for a particular instance only?
View 9 Replies View RelatedI was monitoring a database job to collect statistics, it was scheduled using DBMS_JOBS..I found that it was running during business hours so i got the session ID of the job using;
select sid from dba_jobs_running where job=11;
I then i killed the job using;
select serial# from v$session where sid =232;
alter system kill session '232, 10852';
select sid from dba_jobs_running where job=11;
no rows selected...After some time i again fired the same command
select sid from dba_jobs_running where job=11;
SID
----------
232
and found that the same job is again running..This behavior was repeated again N again. i have attached the spool file for the same...
what could be the reason that the job is starting all over again even after killing the session and what should be done to stop it..I understand that once the database shuts down and if the job is still running then it will restart once the database is up..In this case, Should i remove the job and re submit it again..
I found in alert log that PMON "failed to acquire latch" during shutdown.What it means and how to rectify the same.
View 2 Replies View RelatedWe are unable to drop user due to below error, how to drop the below user without shutdown the database.
SQL> drop user mvm_2010 cascade;
drop user mvm_2010 cascade
*
ERROR at line 1:
ORA-00604: error occurred at recursive SQL level 1
ORA-14452: attempt to create, alter or drop an index on temporary table already in use
No session was available for particular user.
I have oracle 10g as well as oracle 8i on my server. currently we are using oracle 10g. now we get the following error when we try to connect to oracl 10g database.
Microsoft Windows XP [Version 5.1.2600]
(C) Copyright 1985-2001 Microsoft Corp.
C:Documents and Settingsomni>cd
C:>sqlplus
olog
The system cannot find the path specified.
C:>sqlplus/nolog
SQL*Plus: Release 8.1.5.0.0 - Production on Tue May 15 16:39:13 2012
(c) Copyright 1999 Oracle Corporation. All rights reserved.
SQL> connect sys/admin as sysdba
Connected to an idle instance.
SQL> shutdown abort;
ORACLE instance shut down.
SQL> startup nomount;
LRM-00109: could not open parameter file 'D:oro8iDATABASEINIT.ORA'
ORA-01078: failure in processing system parameters
The location of pfile of oracle 10g database is c:/oracle/product/10.0.0.1/admin/pfile.
I searched the knowledge base here and in other forums and haven't found the answer. There was a similar condition presented earlier, but it turned out the resolution was to run the >shutdown/>startup on the server rather than from a client. Not applicable in my case!
Shutdown and startup called used to work with 9i, now startup fails in 10g. ORACLE_HOME and ORACLE_SID are set and report correct values. What is different in 10g that the script (shown below) now throws a TNS listener error after shutdown?
I successfully upgraded from 9i to 10g (10.2.0.5.0) on Windows Server 2003, 32-bit last weekend. Now our backup_script.bat and oracle_stop_start.sql throw "ORA-12514: TNS:listener does not currently know of service requested in the connect descriptor"
This batch file and sql script predate me and worked with 9i for years. Now the startup command in the oracle_stop_start throws this error after executing shutdown. The backup batch file calls:
sqlplus "system/manager@wind as sysdba" @D:ptcwindchillackupsoracle_stop_start
The entire oracle_stop_start.sql is as follows:
shutdown immediate;
startup open;
quit
What is different in 10g that this now doesn't work? Shutdown works, but it will not startup due to the listener error. I have made the backups work by commenting out the call to sqlplus and I'm getting good backup dumps.
In my virtual image of the server I have found that I can duplicate the error after >shutdown. I have found that if I exit sql*plus and go back in as follows I can get the database instance to restart from the command line:
c:>sqlplus /nolog
sql>connect sys/* as sysdba
sql>startup open wind;
That does start, mount and open the database instance.
Is there a better way to be making sure that everything is stopped before executing the >exp command to create a backup dump? I will look into and test datapump export/import and RMAN for creating the backups, after I get this working again.
why this worked in sql*plus in 9i but not in 10g? Can I make TNS Listener smarter? Change or add variables to the startup command?
I want to set the following parameter in one node and restart the machine.
ALTER SYSTEM SET MEMORY_MAX_TARGET=4G SCOPE=SPFILE sid='*'
I know we could use srvctl command to restart DB.My question is..to restart DB is it advisable to use shutdown immediate and startup command ?
Find an appropriate script to automate Oracle DBs in one server? This db server have 6 instances. We always done the starting up and shutting down manually, although we have a reference script that does this but in Oracle v7.3.4. We do want to include the automatic start/stop of dbconsole for accessing it via OEM.
View 1 Replies View RelatedWhich command is the right way to open a alert log file of below size.
-rw-r----- 1 oracle asmadmin 28070129 Dec 17 08:06 alert_DEMO.log
I used to open a alert log file using vi editor. Is that a right way to open and view a alert log ?
I use following command to determine which table can benefit from shrinking
select * from
table(dbms_space.asa_recommendations('FALSE', 'FALSE', 'FALSE'))
order by reclaimable_space desc
then i give following command to get reclaimable space
alter table t1 enable row movement ;
alter table t1 shrink space cascade;
alter table t1 disable row movement ;
in table t1 427MB was shown as reclaimable space, after executing above commands, i run dbms_space procedure again to check the out come, but result was same.I understand tablespaces are by default ASSM in 11g, none of table has LONG datatype or LOB indexes or MVIEW with ON COMMIT.
I do below alter command alter tablespace RCA_MB_IDX add datafile '/gxsdb/database oradata5/RCA/RCA_REF_MB_IDX_01.dbf ' size 1024M
But there is extra space in the file location '/gxsdb/database/oradata5 RCA/RCA_REF_MB_IDX_01.dbfX' I mark X for that space ...
The command is commit .
But there is problem when do backup ...as the file cannot be find since there is extra space after ".dbf" How can I fall back ?
I am using Oracle database server and I want to show existing databases on that server. Are there any SQL plus command to list all databases there in the server?
View 1 Replies View RelatedI try to login to my server but got "Login Error: SQL Error State 08004 , Native Error Code : 409 , ODBC Error , [Oracle][ODBC][Ora] ORA-01033 : ORACLE initialization or shutdown in progress".
View 3 Replies View RelatedWhen i tried to connect oracle "oracle initialisation or shutdown in progress" was the error. then i tried the following steps and the results are as detailed below.
C:\>sqlplus/nolog
SQL*Plus: Release 9.0.1.0.1 - Production on Wed Jun 30 12:30:40 2010
© Copyright 2001 Oracle Corporation. All rights reserved.
SQL> connect sys/manager as sysdba
Connected.
SQL> exp
SP2-0042: unknown command "exp" - rest of line ignored.
SQL> export
SP2-0042: unknown command "export" - rest of line ignored.
SQL> shutdown
ORA-01109: database not open
[code]....
i install oracle 10g on linux on perform the following step but my database is not auto start with the machine
Automatic startup and shutdown oracle on linux Oracle database server provides two scripts to configure automatic database startup and shutdown process.
The scripts are,
$ORACLE_HOME/bin/dbstart
$ORACLE_HOME/bin/dbshut
Now let's look at unix level script. When a unix machine boots it runs scripts beginning with Snnname in /etc/rc3.d.
-Here the number nn indicates the order in which these scripts will be run. The name just indicates the function of the script.
In the same way shutdown scripts are named as Knnname which are run from /etc/rc0.d.
If we want that Oracle is the last program that is automatically started, and it is the first to be shutdown then we will name the startup and shutdown scripts on OS like /etc/rc3.d/S99oracle and /etc/rc0.d/K01oracle respectively.
The database script dbstart and dbora will be called from OS script /etc/rc3.d/S99oracle and /etc/rc0.d/K01oracle respectively.
Note that dbstart and dbshut take each SID, in turn, from the /etc/oratab file and startup or shutdown the database.
Automate Startup/Shutdown of Oracle Database on Linux
Step 01: Be sure that oratab file is correct and complete.
Check for oratab file either in /etc/oratab or in /var/opt/oracle/oratab.
Database entries in the oratab file have the following format:
$ORACLE_SID:$ORACLE_HOME:Y
Here Y indicates that the database can be started up and shutdown using dbstart/dbshut script.
If in my database there is two database named arju and arjudup then my oratab file will contain the entry like,
arju:/var/opt/oracle/product/10.2.0/db_1:Y
arjudup:/var/opt/oracle/product/10.2.0/db_1:Y
where /var/opt/oracle/product/10.2.0/db_1 is the $ORACLE_HOME of my database.
Step 02: Create a script to call dbstart and dbshut. In this example I will create one script that will do both startup and shutdown operation. I will name this script as dbora and will be placed in '/etc/init.d'.
a) Login as root.
b) Change directories to /etc/init.d
c) Create a file called dbora and chmod it to 750.
# touch dbora
# chmod 750 dbora
d)Edit the dbora file and make the contents of it like below.
[Code].....
i have a Problem when i try to connect to my Database Oracle 10.2.
every time i tried to connect to my database the Message: ORA-01033: ORACLE initialization or shutdown in progress appear.
In the alert.log there is the last writen part:
Wed Feb 16 21:55:54 2011
Errors in file d:\oracle\admin\v8\bdump\v8_arc0_5220.trc:
ORA-19809: limit exceeded for recovery files
ORA-19804: cannot reclaim 102385664 bytes disk space from 21474836480 limit
[code].....
In the morning i still work with my database then it freez and after restart the System i get everytime the same error Message.Start and stop the Oracle Service does not work.My system is Windows XP SP 3 if this is importend.
I am facing with the following error where I can not log into the iSQL*Plus 10.2.0.3.0.
ERROR - ORA-01033: ORACLE initialization or shutdown in progress in oracle 10g.
I am using windows 7 on my 64-bit machine, and I installed oracle database 12c. Everything was installed fine, and i was able to connect to the HR schema. However, the next day when I wanted to connect, I got the ORA-01033 Oracle initialization or shutdown in progress error.
View 10 Replies View Related