i am installing oracle database 8.1.7 on dell server power edge 2650 first time database successfully installed but when i want to crate new database by Database Configuration Assistant it is not working for new database creation.
View 1 RepliesData Base Configuration assistant for create new database not working in oracle 8.1.7 in windows server 2000 / server 2003 how can i create new database
View 1 Replies View RelatedI m using Windows Vista Business 32 bit , Oracle 10.2.0.3
while running my setup so many time i got same error each and every time Error:12560 TNS Protocol Adapter error and it shows me i attached my screen shot with my thread , and remember i already installed earlier but at that time there was no error and successfully installed, i removed the total software before installing and i also removed my environment variable and after getting this Database Configuration Assistant failure there is no service is started regarding my database.. I also tried manually but there also i got some other problem if by Database Configuration Assistant it ll b solved then it ll be good for me.
I've installed without problems Oracle 8.0.5 on WS 2003. After installation I've created 8 databases, with the utility Database Configuration Assistant (dbassist, executed by launch80.exe).
After that, the DBAssist doesn't run anymore.
I've tried EVERYTHING. And I have no success, Im stuck. And I need to create several databases.
While I am installing oracle 10g on vista i am getting the error ora-12546:tns:permission denied at database configuration Assistant.
View 1 Replies View RelatedHow to create own database in oracle 10g. I want to create new database in oracle.
View 10 Replies View RelatedI am installing Oracle 12c R1 on Windows 2012. The windows is configured as a domain controller. I am logged in as the domain administrator.I created a normal domain user -- DomainNameORACUSER. I provided this as the existing user id during Oracle installation.
The software installs fine, but when creating the DB using the database configuration assistant, an error is shown "error in process:...inoradim.exe. Enter password for Oracle service user: DIM-00019: create service error. O/S-Error: (OS 87) The parameter is incorrect". The DB is not created.
I skipped the db creation and completed the installation. When tried to create the db using the database configuration assistant after installation, I received the same error.I performed the same installation on Windows 8 and was successful in creating the db.
create a new DB service and apply the load , then I need to verify the service load from Enterprise Manager or table V$SERVICEMETRIC .
Below are what I did
Quote:I tried to add service in tnsnames.ora like below
SERVICE = (DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(PORT=25057)(HOST=dadvmc))(CONNECT_DATA=(SID=tgc4)))
/************
Also I tried the serviceName like below, but not working when I conneted SALES1 from sqlplus
SALES1 = (DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(PORT=25057)(HOST=dadvmc))(CONNECT_DATA=(SERVICE_NAME=host.us.xxx.com)))
**********/
and login as
sqlplus scott/tiger@SERVICE[/email][/email]
then lock table EMP in exclusive mode in two session.
I can see the load is added to service SYS$USERS , but I can't see the new service from V$SERVICEMETRIC or Enterprise Manager.
select
SERVICE_NAME
from V$SERVICEMETRIC
How could we create the new DB service?
I have install Oracle 10g Database software in Red Hat 5.9 64bit. When I want to create a database manually (not using DBCA) I am getting errors like follow:
[oracle@t24app2 ~]$ export ORACLE_SID=dbend08
[oracle@t24app2 ~]$ sqlplus / as sysdba
SQL*Plus: Release 10.2.0.1.0 - Production on Wed Jun 19 16:19:37 2013
Copyright (c) 1982, 2005, Oracle. All rights reserved.
ERROR: ORA-12154: TNS:could not resolve the connect identifier specified
Enter user-name: I am trying to connect as host not using Tns file info.
we are having physical standby database and production database..we have create a soft link for a datafile in production to another mount point
ex- /disk1/data1 to /disk2/data1
now we want to keep the datafile in /disk2/data1 and remove the softlink..As we are having physical standby database . i need to know what are step to be taken. my action plan is as follows:
In production.
1. synchronise both standby(apply archive logs) and production.
2.shut down the standby
3.create controlfile in production in ascii format and edit the path (/disk1/data1 to /disk2/data1)
4. run the @control.sql that i have created
4.create a standby control file in production .
In standby:
1. take the backup of controlfile.
2.place the newly create controlfile(from production) to the location of controlfile
3. remove soft link.
4.startup mount.
5. then we can apply logs as usual to make the standby sync.
whether my action plan is 100% correct or any changes to be done.
i want to create new database in oracle 10g, i follow following steps.
C:ORACLE_SID=ALI
THEN create passwordfile
orapwd file=orapwdALI.ora password=ali entries=6
then create oracle instance
C:Oradim -new -sid ALI -STARTMODE AUTO
after that i use
SQLPLUS /NOLOG
THEN i write the command to connect to user ali but
CONNECT SYS/ali as sysdba
it display following message.
Error
ORA-1256: TNS: protocol adapter.
i also check the oracle services from "services.msc", where oracle instance is "start".
I have database in single server. I already have ORACLE_SID=stagedb. So i want to create new sid and named as proddb.Is it possible have multiple db in single server? This server not running as RAC. It run as single only.
View 1 Replies View RelatedWhile creating my database manually i got error
sql> create database orcl
>national character set utf8
national character set utf8
*
ORA:12701 CREATE DATABASE CHARACTER SET IS UN KNOWN...
where
sql> create database orcl
> character set WE8ISO8859P1
is successful...
how to create best profile for huge user in oracle database user which take lagre uga memory.
View 5 Replies View RelatedThrough an Oracle Apex application I need to create/drop a user/schema in another Oracle database. i.e., create/drop user remotely using an Oracle Apex application.
View 12 Replies View RelatedI am trying to attach lifecycle definitions to tables of Oracle EBS R12 database, using the "Refresh table list" option of ILM assitant.
Though its showing the refresh job running to completion, but its not displaying the list all of tables.
Tried it with narrowing the search for a single schema but no luck.
how to get the list of all tables or at least list of tables belonging to a schema in Oracle EBS R12.
Running a Dell x86_64 machine using CentOS 6.4 Install using the command: rpm -ivh oracle-xe-11.2.0-1.0.x86_64.rpmOracle XE installs without any errors.
However: When during database configuration we get the Database Configuration failed error The logs all show similar errors, here's a snippet: Create controlfile reuse set database "XE"*ERROR at line 1:ORA-01034: ORACLE not availableProcess ID: 0Session ID: 0 Serial number: 0 BEGIN dbms_backup_restore.zerodbid(0); END; *ERROR at line
1:ORA-01034: ORACLE not availableProcess ID: 0Session ID: 0 Serial number: 0 ORA-01034: ORACLE not availableORA-27101: shared memory realm does not existLinux-x86_64 Error: 2: No such file or directoryORA-00119: invalid specification for system parameter LOCAL_LISTENERORA-00130: invalid listener address '(ADDRESS=(PROTOCOL=TCP)(HOST=1q6xlf1.bcohome.bco.com)(PORT=1521))'Create controlfile reuse set database "XE"*ERROR at line 1:ORA-01034: ORACLE not availableProcess ID: 0Session ID: 0 Serial number: 0 alter system enable restricted session*ERROR at line 1:ORA-01034: ORACLE not availableProcess ID: 0Session ID: 0 Serial number: 0 alter database "XE" open resetlogs*ERROR at line 1:ORA-01034: ORACLE not available
i've perform a stress test of a database in 2 configuration :
1) Single instance 11.2 with 8gb Sga e 4gb Pga on Linux, 6core with instance caging =4, resource_manager=defaut_plan
2) 2 Nodes Rac 11.2 with 8gb Sga e 4gb Pga in both nodes on Linux, 32core with instance caging =4, resource_manager=defaut_plan.
I've used Swingbench and the transaction per minute are equal, Avg transaction per s in rac are Greater then single instance (4ms vs 40ms).I know that rac is not for high performance.My question is: is rac config best than single instance and if yes what is the %?
I have two production servers and business required a another one or two new databases need to create in these server A & B. what are the important things i need to task it while give this kind of recommendation.
Below is for your reference and in server A how database we can create[need sga size & pga size] and server B as well.
Server Name Physical Mem SGA PGA Existing DB Name
Server A 48GB 8gb 6gb PRODA
8gb 6gb PRODB
Server B 48GB 8gb 6gb PRODA
4gb 3gb PRODB
4gb 3gb PRODC
Note: Due to new database existing production db performance should not affect.
we are running Oracle database 11.2.0.3 on RHEL 6.1.
Should we join the above machine to an existing Windows 2003 (Active Directory) Domain? or Configure it as a standalone Server?.
If i create database on server(remote desktop connection) and try to some R&D like shutdown or startup command it will effect my other database or not.
View 1 Replies View RelatedMy problem is if i start sudo /etc/init.d/oracle-xe configure i get Database Configuration failed. Look into /u01/app/oracle/product/11.2.0/xe/config/log for detailsI use a plain installed Ubuntu 12.04 and try the instructions of the Oracle 11gR2 Express Edition on Linux Ubuntu 11.10 howto. Also i installed Ubuntu 11.10 and tryed is, but the same error happens.
On the install script i get:
toxsox@vm3:~/Disk1$ sudo dpkg --install ./oracle-xe_11.2.0-2_amd64.debVormals abgewähltes Paket oracle-xe wird gewählt.
(Lese Datenbank ... 23051 Dateien und Verzeichnisse sind derzeit installiert.)
Entpacken von oracle-xe (aus ./oracle-xe_11.2.0-2_amd64.deb) ...
oracle-xe (11.2.0-2) wird eingerichtet ...
Executing post-install steps...
/var/lib/dpkg/info/oracle-xe.postinst: line 77: bc: command not found
/var/lib/dpkg/info/oracle-xe.postinst: line 78: bc: command not found
[code]....
I had changed the /etc/init.d/oracle-shm so how Dude wrote it to mount --move /run/shm /dev/shmmount -B /dev/shm /run/shm>
free -m
total used free shared buffers cachedMem: 3961 1045 2916 0 15 921
-/+ buffers/cache: 109 3852
Swap: 2383 0 2383>
i also tryed some other instuctions for 12.04 and Oracle XE but without success. I never hat the ORA-00845: MEMORY_TARGET but everytime the ORA-27101: shared memory realm does not exist Error.
just realised the data guard configuration seems to be workin but the error kepps appearing on the alert log of both primary and physical standby that i configured. below is my primary and standby pfiles.
primary
*.db_unique_name='CPASPRD'
*.service_names='CPASPRD'
*.log_archive_dest_1='LOCATION=/Oracle/archivelog/'
*.log_archive_format='%t_%s_%r.dbf'
[code]....
i am trying to configure rman for newly created database .when i entered
rman target /
it is throwing following error
[/u01/app/oracle/product]rman target /
Recovery Manager: Release 9.2.0.8.0 - 64bit Production
Copyright (c) 1995, 2002, Oracle Corporation. All rights reserved.
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-00554: initialization of internal recovery manager package failed
RMAN-04005: error from target database:
ORA-12162: TNS:service name is incorrectly specified
I have CPU based Oracle server license. In this case as per license policies of Oracle I can have unlimited database with unlimited users connecting it.
I need to create as many as 100 database with upto 100 users (max) for each database as client. What is the recommended hardware for this server? CPU/ RAM/Harddisk, recommended chipset on the motherboard (in case of database storage capacity required is not high typically - 20 GB is OK per database - average), redundancy is critical, also Oracle database vault is going to be installed; as security is of prime importance between users of different database. Which specific server models from specific vendors like IBM/ Dell/ HP are good ones for this purpose?
i am trying to install Oracle 10.10.2.0 on Windows Server 2003 standard x64 Edition Service Pack, but when i try to run the installer or open DVD it gives me below error.
"The image file D: is Valid, but is for a machine type other than the current machine."
I have to migrate production database version 10gR2 on windows 2003 server to oracle 11gR2 on windows 2008 server . So far i have just installed the oracle software on 64bit windows 2008 server. How to move the data or migrate from old server to new server .
View 22 Replies View Relatedsee as i said keep on my database down in the night time around 9 pm. the OS redhat linux 5 restarting morning around 6.45 am.when i check alert_log there is no indication.when i check OS log , OS restarting around 6.45 amchecked in the log file in OS level
location: /var/log
i found this
Jun 7 06:45:33 Alraya syslogd 1.4.1: restart.
Jun 8 06:42:22 Alraya syslogd 1.4.1: restart.
Jun 9 06:47:12 Alraya syslogd 1.4.1: restart.
what is this mean, system restarting around 6:45 daily i think now i m posting listener.log for reference
<b>06-JUN-2010 21:04:52 *</b> (CONNECT_DATA=(CID=(PROGRAM=)(HOST=Alraya)(USER=alrayaora))(COMMAND=status)(ARGUMENTS=64)(SERVICE=(ADD
RESS=(PROTOCOL=TCP)(HOST=Alraya)(PORT=1521)))(VERSION=169869568)) * status * 0
06-JUN-2010 21:05:05 * (CONNECT_DATA=(SID=alraya)(CID=(PROGRAM=perl@Alraya)(HOST=Alraya)
[code]...
OS is restarting around 6.45 in the morning, but database getting down night around 9 pm itself why then in the morning if i bounce the database it starting with no problem
I am trying to find the unix process for one of my application in the database but I am unable to view the same. To simulate, I did the following.
1. My database runs on different server.
2. I invoked "sqlplus" from another unix box to login to the database.
3. I found that the process id (ps -ef |grep sqlplus).
4. When I execute the below mentioned query it does not display the process id that I am looking for. But the osuser, username, program and machine details are correct. How can I know the process details from the database?
SELECT SYS.GV_$SESSION.OSUSER, SYS.GV_$SESSION.USERNAME, SYS.GV_$PROCESS.SPID,
SYS.GV_$SESSION.MACHINE, SYS.GV_$SESSION.PROGRAM,
SYS.GV_$PROCESS.PROGRAM ,SYS.GV_$SESSION.SQL_ID
FROM
SYS.GV_$PROCESS, SYS.GV_$SESSION
WHERE
SYS.GV_$PROCESS.ADDR=SYS.GV_$SESSION.PADDR and SYS.GV_$SESSION.USERNAME='TEST'
and SYS.GV_$SESSION.MACHINE like '%hostname%'