I am attempting to perform a TSPITR on a newly created tablespace. The error indicates that the tablespace is not in the recovery catalog in which case it is. The database is Oracle 11g on Win2k8 64bit enterprise edition.
List of Datafiles in backup set 52 File LV Type Ckp SCN Ckp Time Name ---- -- ---- ---------- --------- ---- 1 Full 3959509 06-MAR-11 +DATA/orcl/datafile/system.257.742678049 2 Full 3959509 06-MAR-11 +DATA/orcl/datafile/sysaux.258.742678049
i create new database (Student) using command line, now i want to connect with newly created database (using sys as sysdba), but again it directly connected with old database (ORCL). So what should i do to connect with newly created database (Student).
We are running a 5Tb database backup which takes really a long time to backup and impacts the performance in general during the backup. We got a DataGaurd database in place which we want to utilize to run the RMAN backup on to avoid performance impacts and just use DG database for backup and DR purposes. My Question is if we run the backups on DataGaurd Database, How would a RMAN DG database backup would clear the archive logs from Primary production and from DataGaurd Database during the backup process?
I have oracle 10g installed on my system and name of the database is "ORCL" for which I have schedule the incremental backup everyday. Mentioned below are the steps followed
*************PARAMETERS TO BE CHANGED****************** configure channel 1 device type disk format '\192.16.17.140dbbackups192.16.17.152oracle_rman_backup_incrementalstd_%U'; configure channel 2 device type disk format '\192.16.17.140dbbackups192.16.17.152oracle_rman_backup_incrementalstd_%U'; CONFIGURE CONTROLFILE AUTOBACKUP FORMAT FOR DEVICE TYPE DISK TO '\192.16.17.140dbbackups192.16.17.152oracle_rman_backup_incrementalcntrl_%U'; CONFIGURE RETENTION POLICY TO REDUNDANCY 7; CONFIGURE CONTROLFILE AUTOBACKUP ON; *******************************************************
*******COMMAND FOR THE CONNECTING TO RMAN************** rman LOG = \192.16.17.140dbbackups192.16.17.152oracle_rman_backup_incremental rmanlog_%date:~4,2%-%date:~7,2%-%date:~10%.txt APPEND CONNECT TARGET SYS/ORACLE@ORCL *******************************************************
********INCREMENTAL BACKUP COMMAND********************* RUN { BACKUP INCREMENTAL LEVEL 1 FOR RECOVER OF COPY WITH TAG 'incr_backup' DATABASE; BACKUP ARCHIVELOG ALL DELETE INPUT; } ********************************************************************
Now I want to restore this backup to some other system with new database. How to do this recovery to some other database on new system.
How one should know whether RMAN is using target database control file or using separate catalog database. Also what one should do if he dont have catalog users credentials.
I have done many duplication before in sinlge instance databases using a backup tool and rman catalog. At the moment i was trying to do a RAC database duplication and facing some issues. For this i was doing a testing on my 1-node RAC. Primary and duplicated database is on the same Host and oracle version is 10.2.0.3. I perfomed following steps:
1.Created a DUPL database using DBCA.
2.Created a pfile using spfile.
3.Dropped all the datafiles, controlfiles and redo log files.
4.Started the database in nomount using pfile.
5.Disable cluster related parameters in pfile.
6.Took a full backup of the MAIN database with archivelog on disk.
6.Duplicate the database and it is done successfully.
7.Shutdown the instance and enabled cluster parameters.
8.Start instance using SRVCTL fails with error CRS-0215: Could not start resource 'ora.DUPL.DUPL1.inst'
But if start the instance using sqlplus it comes up nicely. There is not much information in alert log files.
I want to duplicate a prod database in to a dev db.I am using catalog database to connect to target and auxiliary datbase.I copied all backupsets to the local disk on Dev env in the correct path.For RMAN duplicate ,does the backuppeices need to be present on PROD filesystem as well or just DEV filesystem or both.
starting full resync of recovery catalog RMAN-00571: =========================================================== RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS =============== RMAN-00571: =========================================================== RMAN-03002: failure of allocate command at 02/18/2013 05:00:06 RMAN-03014: implicit resync of recovery catalog failed RMAN-03009: failure of full resync command on default channel at 02/18/2013 05:00:06 ORA-02291: integrity constraint (REPOSDB.ORL_F1) violated - parent key not found
I would like to duplicate to the different server Oracle Database with RMAN. I've configured flash recovery area for Oracle Database. My questions are:
Source Server ( target ) : ORACLE_SID : DB11G AUXILIARY Server (duplicate ): ORACLE_SID : CLONE
1- if backup files (autobackup and backup set)/ Archived Logs are in a different path on the source host (not default FRA Path) then how can I use the DUPLICATE command? BTW, only the flashback logs are in the default location (/u01/app/oracle/fra/flashback). Path: /u01/app/oracle/oradata/DB11G/autobackup and /u01/app/oracle/oradata/DB11G/backupset.
2 - Do I have to add *_CONVERT parameters for different SID as shown below? e.g. : DB_FILE_NAME_CONVERT , LOG_FILE_NAME_CONVERT.
DB11G.__java_pool_size=4194304 DB11G.__large_pool_size=4194304 DB11G.__oracle_base='/u01/app/oracle'#ORACLE_BASE set from environment DB11G.__pga_aggregate_target=155189248 [code]......
We are having 2 DB's on separate servers but both the DB is having same DBID and NAME. Also both the backup is planned to execute from one rman catalog DB.
Will the catalog DB confuse, when we execute backup for both the DB at same.
Database version : 11.1.0.7 Applications R12 (12.1.3) Operating system : Redhat linux 5.5
I would like to know how to create recovery catalog database to acheive rman backups as control file will not keep backup info longer. This is for our production database what are the requirements before doing so and what happens to configure retension policy to recovery window.
Initially plan of taking backup to disk and later moving backups to tape device
I have taken the RMAN Full database backup through the following command.My database is in no archivelog mode.
AT RMAN prompt Shutdown immediate; Startup mount; run { allocate channel c01 device type disk format 'd: man_bkp est_%U'; allocate channel c02 device type disk format 'd: man_bkp est_%U'; backup full database tag 'full_bkup_test_081111'; backup current controlfile; backup spfile; release channel c01; release channel c02; }
Now i have deleted my all controlfile and spfile/Pfile from the database.So how can i recover my SPfile and controlfile? i do not have autobackup on of SPfile/Controlfile.
i am trying to restore database using rman backup on same machine using command
RMAN> run { 2> set until sequence 23; 3> restore database; 4> recover database; 5> } but it will give me error. RMAN-00571: ======================================================= RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS =========== RMAN-00571: ======================================================= RMAN-03002: failure of restore command at 03/31/2011 19:18:11 [code]....
On production environment i am running Oracle 10g (10.2.0.4) on windows server 2003. and take full compress backup through rman .
I have create a new machine from scratch OS (windows 2003 server) Database Oracle 10g R2 (10.2.0.4) same architecture as live,
Can i standup a instance with the backup i have taken from my live database. And if yes .......how can i ......means i want to take backup from live and restore it on new created machine
I was handed a folder that consists of all the files (Datafiles, controlfiles,spfiles, backupsets etc) for a database. The SID is Oracle.
So now I have two options:
1. Attach the Datafiles
2. Restoring the Database with the Backupsets.
Option 1:I tried with working with the control files but didnt get anywhere because I did not understand how to attach the datafiles (I tried modifying the control file, to no avail).
I tried replacing the spfiles and pfile then copying the datafiles (replacing the existing ones)...but I could not create the control file as well...
Option 2:I do not know how to make RMAN see the backupsets of the Old database; despite they are in the same location as those of the new database.
Can't start the Database and can't backup What is happening now. My database connection is not stable so can't do the backup.I spent two days trying unsuccessfully.
check the following print screen : [test@localhost ~]$ xhost +access control disabled, clients can connect from any host[test@localhost ~]$ [test@localhost ~]$ [test@localhost ~]$ su - rootPassword: [root@localhost ~]# [root@localhost ~]# [root@localhost ~]# su - oracle[oracle@localhost ~]$ [oracle@localhost ~]$ export ORACLE_SID=db11gr2[oracle@localhost ~]$ [oracle@localhost ~]$ echo $ORACLE_HOME/u01/app/oracle/product/11.2.0/db_1[oracle@localhost ~]$
I have an issue with restoring a RMAN backup that i have with me to a new database instance. What i have with me are: 1. Backup of SPFile.
(O1_MF_NCNNF_CTLFILE_BU_92DVGYO2_.BKP)2. Backup of Control file (O1_MF_NNSNF_SPFILE_BU_92DVGW9H_.BKP)3. Full database backup (O1_MF_NNSNF_FULLPROD_BU_92DVGW9H_.BKP)
I have received these files from a customer environment and I need to restore these to a new database instance in a local machine. I have given a attempt as follows (in Oracle 10g): 1, Created a new database instance (Test75) using Oracle Database Configuration Assistant2. SET ORACLE_SID = Test753. Connected to this instance using RMAN4. Tried to restore the SPFILE from the received BKP file.I am getting errors and cannot proceed. I am not sure whether I am executing the correct steps.
I have a RUN file within a script to duplicate a database. As part of this RUN file I also run the command configure controlfile autobackup off; as part of this RUN file. However, this command has turned off backup of the control file on the AUXILLARY database (i.e. production) as well as the TARGET database (test). Is this supposed to happen?
My run file is:
rman TARGET sys/XXXX@${DB}-SOURCE AUXILIARY / RUN { allocate AUXILIARY channel a1 type disk; allocate AUXILIARY channel a2 type disk; allocate AUXILIARY channel a3 type disk; allocate AUXILIARY channel a4 type disk;
i have created a new tablespace and assigned it to new user. What are the minimum no. of grants i should give, so that the user can made any kind of changes to all the objects within the tablespace and cant access other tablespace.
We are trying to restore a database on the different server using RAM incremental level 0 and 1 backups. We have weekly Incremental level 0 backups along with incremental backups on daily basis. During recovery of Incremental level 0 backup, RMAN is expecting/looking for Incremental Level 0 backup of prior week as well. Is this the usual process for RMAN to look for prior level 0 backup though we need to restore from the current level 0 backup and roll forward by a week with subsequent Level 1 backup.?
We intend to restore from the Level 0 of 1/16 and roll forward with daily incrementals till 1/22. RMAN is expecting level 0 backupsets from 1/9 backup as well and keep failing since those backups are not available. quick inputs since we are in middle of recovery and trying to resolve if this is even doable.
