XE :: Database Configuration Failed Error?
Jun 27, 2013
Running a Dell x86_64 machine using CentOS 6.4 Install using the command: rpm -ivh oracle-xe-11.2.0-1.0.x86_64.rpmOracle XE installs without any errors.
However: When during database configuration we get the Database Configuration failed error The logs all show similar errors, here's a snippet: Create controlfile reuse set database "XE"*ERROR at line 1:ORA-01034: ORACLE not availableProcess ID: 0Session ID: 0 Serial number: 0 BEGIN dbms_backup_restore.zerodbid(0); END; *ERROR at line
1:ORA-01034: ORACLE not availableProcess ID: 0Session ID: 0 Serial number: 0 ORA-01034: ORACLE not availableORA-27101: shared memory realm does not existLinux-x86_64 Error: 2: No such file or directoryORA-00119: invalid specification for system parameter LOCAL_LISTENERORA-00130: invalid listener address '(ADDRESS=(PROTOCOL=TCP)(HOST=1q6xlf1.bcohome.bco.com)(PORT=1521))'Create controlfile reuse set database "XE"*ERROR at line 1:ORA-01034: ORACLE not availableProcess ID: 0Session ID: 0 Serial number: 0 alter system enable restricted session*ERROR at line 1:ORA-01034: ORACLE not availableProcess ID: 0Session ID: 0 Serial number: 0 alter database "XE" open resetlogs*ERROR at line 1:ORA-01034: ORACLE not available
View 2 Replies
ADVERTISEMENT
Jan 26, 2013
I'm doing some testes installing grid 11.2.0.3 32bits software on a OEL6 32bits (virtual box environment). The problem appeared where i ran root.sh script on node 1. The following error appeared to me:
clscfg: -install mode specified
Successfully accumulated necessary OCR keys.
Creating OCR keys for user 'root', privgrp 'root'..
Operation successful.
CRS-4256: Updating the profile
[code]..
View 2 Replies
View Related
Jun 27, 2012
My problem is if i start sudo /etc/init.d/oracle-xe configure i get Database Configuration failed. Look into /u01/app/oracle/product/11.2.0/xe/config/log for detailsI use a plain installed Ubuntu 12.04 and try the instructions of the Oracle 11gR2 Express Edition on Linux Ubuntu 11.10 howto. Also i installed Ubuntu 11.10 and tryed is, but the same error happens.
On the install script i get:
toxsox@vm3:~/Disk1$ sudo dpkg --install ./oracle-xe_11.2.0-2_amd64.debVormals abgewähltes Paket oracle-xe wird gewählt.
(Lese Datenbank ... 23051 Dateien und Verzeichnisse sind derzeit installiert.)
Entpacken von oracle-xe (aus ./oracle-xe_11.2.0-2_amd64.deb) ...
oracle-xe (11.2.0-2) wird eingerichtet ...
Executing post-install steps...
/var/lib/dpkg/info/oracle-xe.postinst: line 77: bc: command not found
/var/lib/dpkg/info/oracle-xe.postinst: line 78: bc: command not found
[code]....
I had changed the /etc/init.d/oracle-shm so how Dude wrote it to mount --move /run/shm /dev/shmmount -B /dev/shm /run/shm>
free -m
total used free shared buffers cachedMem: 3961 1045 2916 0 15 921
-/+ buffers/cache: 109 3852
Swap: 2383 0 2383>
i also tryed some other instuctions for 12.04 and Oracle XE but without success. I never hat the ORA-00845: MEMORY_TARGET but everytime the ORA-27101: shared memory realm does not exist Error.
View 2 Replies
View Related
Jul 29, 2013
when i install a db using the Assistant Configuartion Database i get no error exept this:
Enterprise manager configuration failed due to the following error - Listener is not up. Start the listener and run EM configuration again. Refer to the log file at C:\Oracle\cfgtoollogs\dbca\emConfig. Log for more details. You can retry configuring this database with Enterprise Manager later by manually running C:\Oracle\product\11.1.0\db_1\bin\emca script.
So I try lsnrctl start and i get:
C:\Windows\system32>lsnrctl start
LSNRCTL for 32-bit Windows: Version 11.2.0.1.0 - Production on 29-LUG-2013 10:26:25
Copyright © 1991, 2010, Oracle. All rights reserved.
TNS-01106: Il listener con nome LISTENER � stato gi� avviato
So I try lsnrctl status and i get:
C:\Windows\system32>lsnrctl status
LSNRCTL for 32-bit Windows: Version 11.2.0.1.0 - Production on 29-LUG-2013 10:23:34
Copyright © 1991, 2010, Oracle. All rights reserved.
Connessione a (DESCRIPTION=(ADDRESS=(PROTOCOL=IPC)(KEY=EXTPROC1521)))
[code]...
The file "server.xml" in E:\app\Andrea.Rimoldi\product\11.2.0\dbhome_1\oc4j\j2ee\OC4J_DBConsole\config\ does not exist...
Is there any way to retrieve or recover this file?
View 11 Replies
View Related
Sep 26, 2010
I am trying for 11gR2 3 node RAC ASM on windows 2003-64-bit. I am using one SCAN ip ,placed in /etc/hosts file.I am not using DNS/GNS. Same thing done(/etc/hosts) on other nodes also.
I have run the cluvfy.bat prior to grid software install and passed very well. When i tried to install Grid Software,at prerequisites i got error as "node connectivity".
Even i ignored this error and run the finish.After moving grid software to remote nodes ,it throws error as " [INS-20802] Grid Infrastructure Configuration failed ".
It specified one log,which i am attaching here. In network side ,the ping is ok to all the nodes.
Here i am attaching the error screen shots and error log file.
I have raised SR with Oracle ,but not able to identify the root cause of this problem.I will post the solution once i got from oracle.
View 1 Replies
View Related
Jul 10, 2008
when iam running netca on oracle llg iam getting the following error..[wstdba@ora11g ~]$ netca
java.io.FileNotFoundException: /oraeng/app/oracle/product/11.1.0/app/oracle11g/cfgtoollogs/netca/netca_OraDb11g_home1-0802284PM3437.log (No such file or directory)
at java.io.FileOutputStream.open(Native Method)
at java.io.FileOutputStream.<init>(FileOutputStream.java:179)
at java.io.FileOutputStream.<init>(FileOutputStream.java:102)
at oracle.net.ca.NetCA.main(Unknown Source)
Oracle Net Services configuration failed. The exit code is -1...All my services are up and running..
View 2 Replies
View Related
Sep 18, 2008
The installation of CRS is successfull & at end it ask to execute 2 scripts on both nodes i.e. orainstRoot.sh and root.sh
When the scripts are executed,the execution of orainstRoot.sh is successfull , but root.sh give following error:
[root@rac2host crs]# ./root.sh
WARNING: directory '/home/oracle/product' is not owned by root
WARNING: directory 'home/oracle' is not owned by root
Checking to see if Oracle CRS stack is already configured
/etc/oracle does not exist. Creating it now.
[code]....
Is this concerned with permissions on OCR, Voting Disk.
the ./cluvy shows the cluster is valid.
View 1 Replies
View Related
Jun 17, 2013
I have installed database 10gr2 on Red Hat linux 5.4 but cannot use enterprise manager. When i launch the page it shows ALL SERVICE are down ( Database , LISTENER) but all these services have been started manually. I dropped the old repository and created a new one but getting the following errors in the logfile:
Jun 17, 2013 5:20:56 PM oracle.sysman.emcp.ParamsManager getParamCONFIG:
No value was set for the parameter MODIFY_SID.Jun 17, 2013 5:20:56 PM oracle.sysman.emcp.DatabaseChecks getDbServiceNameCONFIG: No service name available. Will try to set db_unique_name.db_domainJun 17, 2013 5:20:56 PM oracle.sysman.emcp.util.GeneralUtil initSQLEngineCONFIG: SQLEngine connecting with SID: ghadb, oracleHome: /ORACLE/product/10.2.0/db_1, and user: SYSJun 17, 2013 5:20:56 PM oracle.sysman.emcp.util.GeneralUtil initSQLEngineCONFIG: SQLEngine created successfully and connectedJun 17, 2013 5:20:56 PM
[code]...
View 2 Replies
View Related
Mar 26, 2011
i am installing oracle database 8.1.7 on dell server power edge 2650 first time database successfully installed but when i want to crate new database by Database Configuration Assistant it is not working for new database creation.
View 1 Replies
View Related
Sep 14, 2012
I have completed the installation of APEX and HTTP server on an instance. But while configuring , I got the following error in the login page.
Service Temporarily Unavailable. The server is temporarily unable to service your request due to maintenance downtime or capacity problems. Please try again later.
Oracle-Application-Server-10g/10.1.3.1.0 Oracle-HTTP-Server Server at y0319t345 Port 7777 Access log has the following error:
10.12.26.109 - APEX_PUBLIC_USER [14/Sep/2012:14:41:22 -0700] "GET /pls/apex/apex_admin HTTP/1.1" 503 442
10.12.26.109 - APEX_PUBLIC_USER [14/Sep/2012:14:42:07 -0700] "GET /pls/apex/apex_admin HTTP/1.1" 503 442
10.12.26.109 - APEX_PUBLIC_USER [14/Sep/2012:14:42:10 -0700] "GET /pls/apex/apex_admin HTTP/1.1" 503 442
10.12.26.109 - APEX_PUBLIC_USER [14/Sep/2012:15:02:17 -0700] "GET /pls/apex/INTERNAL HTTP/1.1" 503 442
The database was on Solaris recently we upgraded to 11.2.0.2 and migrated it to Linux. I have tried [URL]... and the metalink note 1289136.1 with no success.
View 3 Replies
View Related
Jan 31, 2013
While installing 11g oracle grid cluster software. I am getting below error.
[INS-40724] No locally defined network interface matches the SCAN VIP subnet.
i have given scan name as scan-cluster.invent
host-name virtual ip name
rac3 rac3-vip
rac5 rac5-vip
I am able to ping rac3 and rac5 from both nodes.
MY /etc/host file look like this.
192.168.2.133 rac3.invent.com rac3
192.168.2.132 rac3-priv.invent.com rac3-priv
192.168.122.1 rac3-vip.invent.com rac3-vip
192.168.2.136 rac5.invent.com rac5
[code]...
ssh connectivity everything works fine.
View 1 Replies
View Related
Sep 13, 2013
i've perform a stress test of a database in 2 configuration :
1) Single instance 11.2 with 8gb Sga e 4gb Pga on Linux, 6core with instance caging =4, resource_manager=defaut_plan
2) 2 Nodes Rac 11.2 with 8gb Sga e 4gb Pga in both nodes on Linux, 32core with instance caging =4, resource_manager=defaut_plan.
I've used Swingbench and the transaction per minute are equal, Avg transaction per s in rac are Greater then single instance (4ms vs 40ms).I know that rac is not for high performance.My question is: is rac config best than single instance and if yes what is the %?
View 0 Replies
View Related
Jul 11, 2012
we are running Oracle database 11.2.0.3 on RHEL 6.1.
Should we join the above machine to an existing Windows 2003 (Active Directory) Domain? or Configure it as a standalone Server?.
View 9 Replies
View Related
Oct 19, 2010
In Trace file I am always geeting one error "Error encountered: ORA-10980" due to which MVs fails . how to overcome from this error?
View 2 Replies
View Related
Sep 23, 2011
after creating database i try to start listener i have copied listener.ora and edit according to db created i have folling issues.
LSNRCTL for IBM/AIX RISC System/6000: Version 9.2.0.8.0 - Production on 23-SEP-2011 15:02:05
Copyright (c) 1991, 2006, Oracle Corporation. All rights reserved.
Starting /u01/app/oracle/product/bin/tnslsnr: please wait...
TNSLSNR for IBM/AIX RISC System/6000: Version 9.2.0.8.0 - Production
System parameter file is /u01/app/oracle/product/network/admin/listener.ora
Log messages written to /u01/app/oracle/product/network/log/listener.log
Listening on: (DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=172.1.17.43)(PORT=1521)))
TNS-01155: Incorrectly specified SID_LIST_LISTENER parameter in LISTENER.ORA
NL-00305: the specified path name does not exist
Listener failed to start. See the error message(s) above...
View 16 Replies
View Related
Sep 14, 2013
I have configured OEM and is up and running but, I am getting below error message when open the OEM URL.
Error Message:
Secure Connection Failed / an error occurred during a connection to rhel6:1158.
The page you are trying to view can not be shown because the authenticity of the received data could not be verified.
View 2 Replies
View Related
Feb 25, 2013
We just upgraded one of our databases to 11g on a new server. The 3rd party application that accesses the db is 32 bit. The software needs to be running on the db server in order for some transactions to occur. Since the oracle client on the db server is 64bit do we need to install a 32 bit client as well. As of right now we are getting an error in the software when trying to connect to the db that says "Test failed. provider cannot be found. it may not be properly installed." This is a live production server so uninstalling and reinstalling oracle is not really an option at this time (unless absolutely necessary). How will installing a 32 bit oracle client effect everything (if that is the route we need to take).
View 3 Replies
View Related
May 30, 2012
We have been getting the below error message, while backing up the DB(Full DB backup) via netbackup. The DB version is 10.2.0.3 (64bit). The archive backup goes fine. the problem is with the full backup.
input datafile fno=00241 name=/u106/oradata/iwhdbqa/iwh_mvlog_01x.dbf
channel CH02: starting piece 1 at 29-MAY-12
RMAN-03009: failure of backup command on CH01 channel at 05/29/2012 21:41:28
ORA-19506: failed to create sequential file, name="iwhdbqa_20120529210533_db_ipnc7n6l_1_1", parms=""
[code]...
I came to know that this is a netbackup configuration/client bug. Can we do something from the oracle side.
The RMAN COMMAND STRINGS we use is as follows:
SET SNAPSHOT CONTROLFILE NAME TO '/u101/app/oracle/product/10.2.0.5/db_1/dbs/iwhdbqa_snapshot_db.snap';
RUN {
ALLOCATE CHANNEL CH01 TYPE 'SBT_TAPE' parms='SBT_LIBRARY=/usr/openv/netbackup/bin/libobk.so64.1' ;
SEND 'NB_ORA_SERV=atlbackupmaster, NB_ORA_POLICY=iwh-dbqa_oracle, NB_ORA_CLIENT=iwh-dbqa-bu';
ALLOCATE CHANNEL CH02 TYPE 'SBT_TAPE' parms='SBT_LIBRARY=/usr/openv/netbackup/bin/libobk.so64.1' ;
[code]...
View 3 Replies
View Related
Jan 26, 2010
Data Base Configuration assistant for create new database not working in oracle 8.1.7 in windows server 2000 / server 2003 how can i create new database
View 1 Replies
View Related
Oct 1, 2011
i am trying to configure rman for newly created database .when i entered
rman target /
it is throwing following error
[/u01/app/oracle/product]rman target /
Recovery Manager: Release 9.2.0.8.0 - 64bit Production
Copyright (c) 1995, 2002, Oracle Corporation. All rights reserved.
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-00554: initialization of internal recovery manager package failed
RMAN-04005: error from target database:
ORA-12162: TNS:service name is incorrectly specified
View 6 Replies
View Related
Feb 1, 2012
I m using Windows Vista Business 32 bit , Oracle 10.2.0.3
while running my setup so many time i got same error each and every time Error:12560 TNS Protocol Adapter error and it shows me i attached my screen shot with my thread , and remember i already installed earlier but at that time there was no error and successfully installed, i removed the total software before installing and i also removed my environment variable and after getting this Database Configuration Assistant failure there is no service is started regarding my database.. I also tried manually but there also i got some other problem if by Database Configuration Assistant it ll b solved then it ll be good for me.
View 9 Replies
View Related
Jun 12, 2011
While I am installing oracle 10g on vista i am getting the error ora-12546:tns:permission denied at database configuration Assistant.
View 1 Replies
View Related
Sep 10, 2013
I have stand alone 11gR2 database. Do I need to configure the listener and have the tnsnames.ora file entries under Grid home and start the listener from Grid home or do I need to start from Oracle database home?
View 5 Replies
View Related
Jul 4, 2013
Table A basically has 4 rows of interest, an outside event changes/inserts let's say row 1.
Row 2 and 3 have to be changed in a trigger depending on the new value of 1.(or not if the value stays the same)
Row 4 is the reference for the update and will not be changed.
My first simple AFTER INSERT or UPDATE trigger obviously failed because of the mutating table error.
View 19 Replies
View Related
Oct 3, 2010
At the end of my installation I received the following error message:
Sep 11, 2010 4:20:49 PM oracle.sysman.emcp.EMConfig perform
SEVERE: Failed to allocate port(s) in the specified range(s) for the following process(es): JMS [5540-5559],RMI [5520-5539],Database Control [5500-5519],EM Agent [3938] | [1830-1849]
Refer to the log file at /u01/app/oracle/cfgtoollogs/dbca/orcl/emConfig.log for more details.
Sep 11, 2010 4:20:49 PM oracle.sysman.emcp.EMConfig perform
[code]....
I found a thread that reported a similar issue and was directed to Oracle Support Document 353843.1 . The suggestion was to adjust the /etc/hosts file, but I don't see anything wrong in the file:
[oracle@jhlinux etc]$ cat hosts
# Do not remove the following line, or various programs
# that require network functionality will fail.
# ::1 localhost6.localdomain6
127.0.0.1 localhost.localdomain localhost
192.168.1.254 jhlinux.home.com jhlinux
View 9 Replies
View Related
Nov 29, 2012
One of database, while taking backup using RMAN, it failed with the following error:
RMAN-03009: failure of backup command on DISK4 channel at 11/28/2012 09:47:29
ORA-19566: exceeded limit of 0 corrupt blocks for file <faile_name>
I used DBV to identify the number of blocks corrupted.
I referred the Metalink iD 457422.1 & 336133.1. But it did not work since the corrupted blocks have got object in it.
I could able to find the object as well. it is one of the table in the datafile.
I used 'ALTER TABLE ... MOVE..' command to see if that works. But again getting the same error while taking the backup and corrupted blocks still exists.
DB Version : 10.2.0.5
OS Version : RHEL 5.6
View 5 Replies
View Related
Aug 9, 2012
I am getting error while installing Oracle 11g on windows xp. Ora --12638: Credential Retrieval failed error. I understand that some people have got that error after the installation( Changing SQL.Net file).
View 9 Replies
View Related
Mar 28, 2010
I've installed without problems Oracle 8.0.5 on WS 2003. After installation I've created 8 databases, with the utility Database Configuration Assistant (dbassist, executed by launch80.exe).
After that, the DBAssist doesn't run anymore.
I've tried EVERYTHING. And I have no success, Im stuck. And I need to create several databases.
View 1 Replies
View Related
Apr 28, 2011
While importing, I got the following error. How to resolve it?
IMP-00017: following statement failed with ORACLE error 1950: CREATE TABLE "table_name".....
View 2 Replies
View Related
Jul 7, 2012
DB 10.2.0.4
After running shut abort it is giving below error while trying to connect sqlplus.
ORA-28547: connection to server failed, probable Oracle Net admin error
View 2 Replies
View Related