I have configured OEM and is up and running but, I am getting below error message when open the OEM URL.
Error Message:
Secure Connection Failed / an error occurred during a connection to rhel6:1158.
The page you are trying to view can not be shown because the authenticity of the received data could not be verified.
At the end of my installation I received the following error message:
Sep 11, 2010 4:20:49 PM oracle.sysman.emcp.EMConfig perform
SEVERE: Failed to allocate port(s) in the specified range(s) for the following process(es): JMS [5540-5559],RMI [5520-5539],Database Control [5500-5519],EM Agent [3938] | [1830-1849]
Refer to the log file at /u01/app/oracle/cfgtoollogs/dbca/orcl/emConfig.log for more details.
Sep 11, 2010 4:20:49 PM oracle.sysman.emcp.EMConfig perform
[code]....
I found a thread that reported a similar issue and was directed to Oracle Support Document 353843.1 . The suggestion was to adjust the /etc/hosts file, but I don't see anything wrong in the file:
[oracle@jhlinux etc]$ cat hosts
# Do not remove the following line, or various programs
# that require network functionality will fail.
# ::1 localhost6.localdomain6
127.0.0.1 localhost.localdomain localhost
192.168.1.254 jhlinux.home.com jhlinux
I am trying to connect my oracle server with enterprise manager. But i have no network connection. What will be the probable listener config. ?
View 2 Replies View RelatedDB 10.2.0.4
After running shut abort it is giving below error while trying to connect sqlplus.
ORA-28547: connection to server failed, probable Oracle Net admin error
We have the Oracle Enterprise Manager Grid Control 10.2.0.5. We recently upgraded our Databases from 10.2.0.3 to 10.2.0.4 and since then we are having this problem.
Whenever i click an Agent on the Grid Control it gives me this error: "Communication between the Oracle Management Service host to the Agent host is unavailable. Any functions or displayed information requiring this communication link will be unavailable. For example: deleting/configuring/adding targets, uploading metric data, or displaying Agent home page information such as Agent to Management Service Response Time (ms)."
I get the same error when i try to configure a host or a database.
Don't know what is wrong
when i install a db using the Assistant Configuartion Database i get no error exept this:
Enterprise manager configuration failed due to the following error - Listener is not up. Start the listener and run EM configuration again. Refer to the log file at C:\Oracle\cfgtoollogs\dbca\emConfig. Log for more details. You can retry configuring this database with Enterprise Manager later by manually running C:\Oracle\product\11.1.0\db_1\bin\emca script.
So I try lsnrctl start and i get:
C:\Windows\system32>lsnrctl start
LSNRCTL for 32-bit Windows: Version 11.2.0.1.0 - Production on 29-LUG-2013 10:26:25
Copyright © 1991, 2010, Oracle. All rights reserved.
TNS-01106: Il listener con nome LISTENER � stato gi� avviato
So I try lsnrctl status and i get:
C:\Windows\system32>lsnrctl status
LSNRCTL for 32-bit Windows: Version 11.2.0.1.0 - Production on 29-LUG-2013 10:23:34
Copyright © 1991, 2010, Oracle. All rights reserved.
Connessione a (DESCRIPTION=(ADDRESS=(PROTOCOL=IPC)(KEY=EXTPROC1521)))
[code]...
The file "server.xml" in E:\app\Andrea.Rimoldi\product\11.2.0\dbhome_1\oc4j\j2ee\OC4J_DBConsole\config\ does not exist...
Is there any way to retrieve or recover this file?
I've changed the ip address of the enterprise manager grid control server. But oms could not be started. I got the error below:
[oracle@YDFULGRID bin]$ ./emctl start oms
Oracle Enterprise Manager 11g Release 1 Grid Control
Copyright (c) 1996, 2010 Oracle Corporation. All rights reserved.
Starting WebTier...
[code]...
When i checked the log:I am getting this error:
2012-09-13 16:23:56,602 [main] DEBUG oms.StatusOMSCmd processStatusOMS.155 - Using http port.
2012-09-13 16:23:56,602 [main] DEBUG oms.StatusOMSCmd processStatusOMS.195 - Attempting to connect to servername
2012-09-13 16:24:17,638 [main] DEBUG oms.StatusOMSCmd processStatusOMS.200 - page status code is 503
2012-09-13 16:24:17,638 [main] DEBUG oms.StatusOMSCmd processStatusOMS.202 - header is 3
2012-09-13 16:24:17,639 [main] INFO wls.OMSController statusOMS.950 - statusOMS finished with result: 3
When i am trying to start dbconsole, it throughs error:
oracle@aaa:aaa:>emctl status dbconsole
Oracle Enterprise Manager 10g Database Control Release 10.1.0.4
Copyright (c) 1996, 2004 Oracle Corporation. All rights reserved.
http://aaa:5500/em/console/aboutApplication
[Code].....
I am facing a problem with my oracle 10g enterprise manager. It is working properly with 64 bit windows 7 os with internet connection. without internet connection i cant start start the enterprise manager how can i resolve the issue and start the enterprise manager without internet.
View 12 Replies View RelatedI am having a database running in my windows 2003 server and I want to configure Enterprise manager for that database to check the resource utilization during the peak hours and also the number of transactions...
View 1 Replies View RelatedWhen login i'm getting error : Details Failed to connect to database instance: ORA-28000: the account is locked (DBD ERROR: OCISessionBegin).
I have checked DBCONSOLE & AGENT are running properly.
litening:/opt/oracle/product/11.2.0/bin>export ORACLE_SID=infoddp
litening:/opt/oracle/product/11.2.0/bin>export ORACLE_HOME=/opt/oracle/product/11.2.0
litening:/opt/oracle/product/11.2.0/bin>export ORACLE_HOSTNAME=liteningv
litening:/opt/oracle/product/11.2.0/bin>emctl status dbconsole
Oracle Enterprise Manager 11g Database Control Release 11.2.0.2.0
Copyright (c) 1996, 2010 Oracle Corporation. All rights reserved.
[code].....
I am trying to create a secure connection and getting the following error. I have tested the password via sqlplus and it works just fine.
oracle[/u01/app/oracle] emctl config emkey -repos -sysman_pwd
TZ set to US/Eastern
Oracle Enterprise Manager 10g Database Control Release 10.2.0.4.0
Copyright (c) 1996, 2007 Oracle Corporation. All rights reserved.
enter repository password..Invalid Password caught Exception java.sql.SQLException: Io exception: The Network Adapter could not establish the connection
I have installed Oracle 10g database on my laptop. and when i login into Enterprise Manager I get the java error: "java.lang.Exception: IOException in sending Request :: Connection refused in the header of the homepage".
View 6 Replies View RelatedI've experienced an error while installing the Application Management Pack 3 on Linux Machine (OS: Oracle Enterprise Linux 5.3 32-bit) with EM Grid Control 10g Release 5. I want to install the Grid Control Plug-in Oracle E-Business Suite Management Pack 3 to manage our EBS Oracle Apps R12, but it was failed due to error. Below was the logs for error:
Log: /u01/app/oraInventory/logs/installActions2010-07-06_03-00-11PM.log
RepManager was not able to run successfully.
/applications/em/em/WEB-INF/lib/myjar.jar:/u01/app/oracle/OracleHomes/oms10g/sysman/jlib/emCfg.jar:/u01/a
pp/oracle/OracleHomes/oms10g/jlib/ojmisc.jar:/u01/app/oracle/OracleHomes/oms10g/sysman/jlib/emUpgrade.jar
:/u01/app/oracle/OracleHomes/oms10g/sysman/jlib/emagentSDK.jar oracle.apps.oms_extn.util.EBSOUIUtil RepMa
[code].....
My problem is i install Oracle 9i enterprise edition 9.0.1.1.1 in windows xp professional but at the time of oracle database confiuration assistent it show me following errors it show:
Not a zip file(End header not found)
One of database, while taking backup using RMAN, it failed with the following error:
RMAN-03009: failure of backup command on DISK4 channel at 11/28/2012 09:47:29
ORA-19566: exceeded limit of 0 corrupt blocks for file <faile_name>
I used DBV to identify the number of blocks corrupted.
I referred the Metalink iD 457422.1 & 336133.1. But it did not work since the corrupted blocks have got object in it.
I could able to find the object as well. it is one of the table in the datafile.
I used 'ALTER TABLE ... MOVE..' command to see if that works. But again getting the same error while taking the backup and corrupted blocks still exists.
DB Version : 10.2.0.5
OS Version : RHEL 5.6
My problem is that when i sign in on Enterprise Manager page ( URL.... ), i don't see that green up arrow that status is UP (and also those charts), but status: Agent unreachable: URL....
I tried to do what is specified in the Metalink(also here: URL.....), but the problem persists. And that metalink note (317242.1) applies to EM Grid Control (maybe that solution works for EM dbconsole also). So i don't have a Grid Control.I tried to stop dbconsole, then start it and then start upload agent ( emctl upload agent), but i got:
C:Documents and SettingsSorin>emctl upload agent
Oracle Enterprise Manager 11g Database Control Release 11.2.0.1.0
Copyright (c) 1996, 2010 Oracle Corporation. All rights reserved.
---------------------------------------------------------------
EMD upload error: Upload was successful but collections currently disabled - disk full
The agent status is:
C:Documents and SettingsSorin>emctl status agent
Oracle Enterprise Manager 11g Database Control Release 11.2.0.1.0
Copyright (c) 1996, 2010 Oracle Corporation. All rights reserved.
---------------------------------------------------------------
Agent Version : 10.2.0.4.2
OMS Version : 10.2.0.4.2
Protocol Version : 10.2.0.4.2
[code].....
The EM documentation does not work in this situation (and i specify this because sybrand_b has a problem with users who don't read the documentation.. ) However, i read here: URL....
"The agent collections will stop when the space on the disk is used beyond the default. Solution is to release the space on the disk."how to release space on the disk? What exactly means this? I have enough space on my D partition, where the Oracle product is. What should i do now? I want to see the EM page like this: URL....
The last week or so, the job has not ran. I finally got some time today to take a look and when I try to manually export the schemas, i get the following message after the first screen (where you choose Schemas and your credentials are entered)
Validation Error - Examine and correct the following errors, then retry the operation: Error - IO error occured.
A few weeks ago i changed the password for sysman and dbsnmp because the backups were not running and after i did that, they ran for a few nights. The only other thing is our system admin for the server changed some user access for the C:Oracle folder, but I still have full control.
I am in the ORA_DBA group and i have "Logon as batch job" selected for my account.
I read at one place to go to Preferences - Preferred Credentials and test the host username and password. When i do this i get the message : "Connection to server as user XXXXXXX failed" so I am thinking it has something to do with my user account, but not sure what i need to change.
I am configuring the Backup Settings through EM. It says 'An error has occurred while configuring the backup settings.'. When i click on 'View Error Details' it shows:
'open2: IO::Pipe: Can't spawn-NOWAIT: No such file or directory at - line 831'
I cant figure out the problem.. I have also created the Disk Backup Location.
I have installed database 10gr2 on Red Hat linux 5.4 but cannot use enterprise manager. When i launch the page it shows ALL SERVICE are down ( Database , LISTENER) but all these services have been started manually. I dropped the old repository and created a new one but getting the following errors in the logfile:
Jun 17, 2013 5:20:56 PM oracle.sysman.emcp.ParamsManager getParamCONFIG:
No value was set for the parameter MODIFY_SID.Jun 17, 2013 5:20:56 PM oracle.sysman.emcp.DatabaseChecks getDbServiceNameCONFIG: No service name available. Will try to set db_unique_name.db_domainJun 17, 2013 5:20:56 PM oracle.sysman.emcp.util.GeneralUtil initSQLEngineCONFIG: SQLEngine connecting with SID: ghadb, oracleHome: /ORACLE/product/10.2.0/db_1, and user: SYSJun 17, 2013 5:20:56 PM oracle.sysman.emcp.util.GeneralUtil initSQLEngineCONFIG: SQLEngine created successfully and connectedJun 17, 2013 5:20:56 PM
[code]...
I have a problem when I install oracle 11g: I did an installation on a win2008 r2 server and everything works fine, I did another installation on another server in the same network as a test, but at the end of the installation I get an alert that says:
start database error control .....
Executing set oracle_unqname and then emctl start dbcontrol.
of course nothing happens.
dbcontrol_nome the service instance will not start. checking the file in your home directory I always acts everything is in place. I reinstalled windows to eliminate all the checks made, repeated installation and here appeared the same problem.
question: can exist 2 oracle installations on the same network with the same name db? I currently have two installations of the same name with oracle db 10
I am getting an error regarding Starting Database Control. I have multiple databases on the same server but every time I am trying to create a new database I am getting the same error again and again.
View 1 Replies View RelatedI try to install the Grid Control 10.2.0.5 on Solaris 10 in an existing (empty) Database Oracle 10.2.0.4. All steps work without problems except
-- OMS Configuration (in Configutaion Assistants)
emca_repos_create15_25_32.log :
Quote:
java.sql.SQLException: ORA-00604: error occurred at recursive SQL level 1
ORA-12705: Cannot access NLS data files or invalid environment specified
at oracle.jdbc.driver.DatabaseError.throwSqlException(DatabaseError.java:124)
at oracle.jdbc.driver.T4CTTIoer.processError(T4CTTIoer.java:304)
at oracle.jdbc.driver.T4CTTIoer.processError(T4CTTIoer.java:271)
at oracle.jdbc.driver.T4CTTIoauthenticate.receiveOauth(T4CTTIoauthenticate.java:647)
[code].......
ORA_NLS10 is set to $ORACLE_HOME/nls/data of DB
Also tried to set to $ORACLE_HOME/nls/data of oms10g but get Problems to start opmn and later on it report also ORACLE_HOME and NLS Parameter set incorrectly. I checked MetaLink / Internet without success.
error of PERL5LIB is more then 1023 characters. see the picture image
View 4 Replies View RelatedI am trying to install Oracle9i Enterprise Edition but the system is giving the following error
Error in writing to file D:oracleora92jliboemlt-9_2_0.jar
I have attached the error image file for review..
I'd install Oracle8i on Window -XP.I am facing following error for Oracle Intelligent Error while starting my computer.
Oracle Intelligent Agent Executable encountered a problem and needed to close.
> C:DOCUME~1ADMINLOCALS~1TempWER1.tmp.dir00dbsnmp.exe.mdmp
> C:DOCUME~1ADMINLOCALS~1TempWER1.tmp.dir00appcompat.txt
I'd already config two db. in my computer & I can access both db.
I'm trying to create a database using DBCA, but before it completes i recieve the following error:
enterprise manager configuration failed due to the following error - Error starting database control refer to the log file at
E:oracleproduct10.2.0db_2cfgtoollogsdbcaorcl30emconfig.log - for mote details you can retry configuring this database with enterprise manager later by manually running E:oracleproduct10.2.0db_2inemca script
I'm using oracle 10g version 10.2.0.5, and my operating system is windows 7
I am attempting to make a job on an active database and I keep getting the error "An error occurred checking if the script file directory exists. Correct the error and try again. Error message: Agent Unreachable"
I can't find any information about the error on the logs and I don't knwo what to do about the error. I really need the script the job makes but how to get it.
i have already give the grant option cnnect,resource to scott but it is not connecting to enter prise manager console of Oracle database 11gR1. i am getting this error while connecting "The application requires more database privileges than you have currently been granted. Click on Help to get more version specific information"
when i am giving scott the dba rights then it is connecting. but i cann't give dba rights to scott.so, how/what is the specific command to give permission scott for connecting to enter prise manager console.
I am using Oracle 10.2.0.1.0. My intention is to create a new database instance.
Here are the steps I have taken,
1. Using DBCA, I created a new database instance, oracle sid = MYORCL0318
2. I created the tablespaces for this instance.(I obviously have not imported any data into this database yet.)
then, I went to Enterprise Manager,
Login = sys
password = xxxxxxx
role = SYSDBA
After I login, I would get an Error like this
java.lang.Exception: Exception in sending Request :: null