I have installed Oracle 10g database on my laptop. and when i login into Enterprise Manager I get the java error: "java.lang.Exception: IOException in sending Request :: Connection refused in the header of the homepage".
View 6 RepliesMy problem is i install Oracle 9i enterprise edition 9.0.1.1.1 in windows xp professional but at the time of oracle database confiuration assistent it show me following errors it show:
Not a zip file(End header not found)
I am using oracle 11g client library on Linux 64bit machine and trying to connect to oracle database using jdbc thin driver.The url format what I am trying to use is:
jdbc:oracle:thin:@IP address:port:service_nameWhen service_name = orcl :
I am able to connect with the above syntax. But when the service_name is having . e.g service_name = orcl.177.39.45, with the above format I get the above error.
If I change the URL syntax to following, it works
jdbc:oracle:thin:@IP address:port/service_name
But both seems to be valid syntax.So I would like to undestand the reason behind the same. When service_name is having ".", why ":" does not work and "/" works and when the service_name is without " ." , 1st format works. Is there any specific reason behind same?
I am facing a problem with my oracle 10g enterprise manager. It is working properly with 64 bit windows 7 os with internet connection. without internet connection i cant start start the enterprise manager how can i resolve the issue and start the enterprise manager without internet.
View 12 Replies View RelatedI am trying to connect my oracle server with enterprise manager. But i have no network connection. What will be the probable listener config. ?
View 2 Replies View RelatedI am trying to create a secure connection and getting the following error. I have tested the password via sqlplus and it works just fine.
oracle[/u01/app/oracle] emctl config emkey -repos -sysman_pwd
TZ set to US/Eastern
Oracle Enterprise Manager 10g Database Control Release 10.2.0.4.0
Copyright (c) 1996, 2007 Oracle Corporation. All rights reserved.
enter repository password..Invalid Password caught Exception java.sql.SQLException: Io exception: The Network Adapter could not establish the connection
I have configured OEM and is up and running but, I am getting below error message when open the OEM URL.
Error Message:
Secure Connection Failed / an error occurred during a connection to rhel6:1158.
The page you are trying to view can not be shown because the authenticity of the received data could not be verified.
I am having a database running in my windows 2003 server and I want to configure Enterprise manager for that database to check the resource utilization during the peak hours and also the number of transactions...
View 1 Replies View Relatedi have already give the grant option cnnect,resource to scott but it is not connecting to enter prise manager console of Oracle database 11gR1. i am getting this error while connecting "The application requires more database privileges than you have currently been granted. Click on Help to get more version specific information"
when i am giving scott the dba rights then it is connecting. but i cann't give dba rights to scott.so, how/what is the specific command to give permission scott for connecting to enter prise manager console.
We have the Oracle Enterprise Manager Grid Control 10.2.0.5. We recently upgraded our Databases from 10.2.0.3 to 10.2.0.4 and since then we are having this problem.
Whenever i click an Agent on the Grid Control it gives me this error: "Communication between the Oracle Management Service host to the Agent host is unavailable. Any functions or displayed information requiring this communication link will be unavailable. For example: deleting/configuring/adding targets, uploading metric data, or displaying Agent home page information such as Agent to Management Service Response Time (ms)."
I get the same error when i try to configure a host or a database.
Don't know what is wrong
How to start EM on windows 7?
View 3 Replies View Relatedwe have 5 database servers in different locations,
1.main database 10g(production) ip-192.1.1.1
2.standby for production 10g ip- 192.1.1.2
both are linux
3.another database 10g windows
4. another database 9i windows
both are in same location
5.new database 10g in linux ip-192.1.1.3
some other location
i m having a system windows xp installed
i m monitoring, all 10g by oracle enterpric manager
linux os monitor by Putty software
and i m monitoring below 10g database by sqlplus. now how could i monitor all the database by oracle enterprise manager grid control installed in my system that windows OS installed.
i have change my database name successful but after that when i open my enterprise manager i can open it but i cannot do anything in enterprise manager . i cannot show any tabs there.. i have attached my this enterprise manager login page here
View 12 Replies View RelatedI've a problem with Oracle Connection Manager and I've read the Oracle topic about it at URL.....but it doesn't work well...This is an image describes the diagram I want to configure URL.....
The IP for each machine is
Database Server : 192.168.0.150
Proxy Server : 192.168.0.153
client : 192.168.0.159
And these are the files for each machine.
1.Proxy server has 1 file
cman.ora
CMAN=
(CONFIGURATION=
(ADDRESS=(PROTOCOL=tcp)(HOST=192.168.0.153)(PORT=1521))
(RULE_LIST=
[code]....
2.Database server has 3 file, and for each one I've added some lines as following
tnsnames.ora
ORCL =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = localhost)(PORT = 1521))
(CONNECT_DATA =
(SERVER = DEDICATED)
(SERVICE_NAME = orcl)
[code].....
3.Finally the client has 2 files
tnsnames.ora
orcl=
(DESCRIPTION=
(SOURCE_ROUTE=YES)
(ADDRESS=(PROTOCOL=TCP)(HOST=192.168.0.153)(PORT=1521))
(ADDRESS=(PROTOCOL=TCP)(HOST=192.168.0.150)(PORT=1521))
(CONNECT_DATA=(SERVICE_NAME=orcl))
[code]....
ORA-12154: could not resolve the connect identifier specified: where I actually define my DB service (orcl) in the tnsname.ora...The output is showen here URL.....
I was trying to connect to a remote database from my client machine. Client machine runs a jsp code to connect to the database and execute a query. I have got oracle jdbc on my machine but still unable to connect to the database.
When checked in Google, i found that oracle connection manager has to be used to connect to the database from jdbc if the web server and database reside on different physical servers. But couldn't gather any further information regarding download and installation.
I do not have oracle connection manager on my system. I read in internet that it is shipped along with oracle 11g software. But i am not sure if that was the case in earlier version as well.
My question is where should i install oracle connection manager? (on database server or client machine) and is it possible to download and install only the connection manager as a stand alone so that i can connect to database from application?
i am using windows xp home edition (with oracle 11g r2). oracle installed with out any problems but when i click get started internet explorer it says(internet explorer cannot display the webpage) this is the address get started open up to [URL]...but does not work.
View 7 Replies View RelatedI'm trying to install OMS on AIX and one of the prerequisites is JDK 1.6.0 SR6 but I couldn't find it in the IBM site, can some one tell me where can I download JDK 1.6.0 SR6?
View -1 Replies View RelatedI've tried to configure Connection Manager but i fails on TNS-04012: Unable to start Oracle Connection Manager instanceThis is my configuration (
CMAN1=(CONFIGURATION=
(ADDRESS=(PROTOCOL=tcp)(HOST=<hostname>)(PORT=1522))
(RULE_LIST=
(RULE=(SRC=*)(DST=<IP>)(SRV=*)(ACT=accept))))
[code]...
I am trying to start enterprise manager without success. i used to work after installation of db 10g but do day when i run the command below it fails. also i donot see any thing useful in the logs that am being directed to directory /oracle/Ora10R2/Orahome/localhost.localdomain_dse/sysman/log
[oracle@cdsdb ~]$ emctl start dbconsole
Oracle Enterprise Manager 10g Database Control Release 10.2.0.2.0
Copyright © 1996, 2005 Oracle Corporation. All rights reserved.
http://localhost.localdomain:1158/em/conso...boutApplication
Starting Oracle Enterprise Manager 10g Database Control .....
[code]....
I have two databases on the same oracle 11g install. The first (ORCL) database uses the default port for EM (1158). However, I don't know what the second one uses. I go to the portlist.ini file, but it only has the entry for the default (ORCL) database.
View 3 Replies View RelatedI tried to start my oem managing but got the following error.
[oracle@Eagle2 ~]$ emctl start dbconsole
OC4J Configuration issue. /home/oracle/app/product/11.1.0/db_1/oc4j/j2ee/OC4J_DBConsole_Eagle_boomiedb not found.
How can I use OEM remotely?
my DB server is on 172.17.1.4 IBM-AIX
and my computer is 172.17.1.53
Because I am tired of using sqlplus :@
When i run EM ,in my explorer show these
SID = ORCL
instance is open agent is up but ...listener is down .my listener is active and run.... however i can connect to DataBase and execute DDL or DML transactions.How i could resolve it ?
I have install oracle 11g database enterprise edition But i cannot find the Oracle Enterprise Manager after the installation. i want the gui based Oracle Enterprise Manager i have access the the web base Oracle Enterprise Manager but not the gui based.how to use and download the GUI Based Oracle Enterprise Manager ....
View 1 Replies View Relatedwhen i install a db using the Assistant Configuartion Database i get no error exept this:
Enterprise manager configuration failed due to the following error - Listener is not up. Start the listener and run EM configuration again. Refer to the log file at C:\Oracle\cfgtoollogs\dbca\emConfig. Log for more details. You can retry configuring this database with Enterprise Manager later by manually running C:\Oracle\product\11.1.0\db_1\bin\emca script.
So I try lsnrctl start and i get:
C:\Windows\system32>lsnrctl start
LSNRCTL for 32-bit Windows: Version 11.2.0.1.0 - Production on 29-LUG-2013 10:26:25
Copyright © 1991, 2010, Oracle. All rights reserved.
TNS-01106: Il listener con nome LISTENER � stato gi� avviato
So I try lsnrctl status and i get:
C:\Windows\system32>lsnrctl status
LSNRCTL for 32-bit Windows: Version 11.2.0.1.0 - Production on 29-LUG-2013 10:23:34
Copyright © 1991, 2010, Oracle. All rights reserved.
Connessione a (DESCRIPTION=(ADDRESS=(PROTOCOL=IPC)(KEY=EXTPROC1521)))
[code]...
The file "server.xml" in E:\app\Andrea.Rimoldi\product\11.2.0\dbhome_1\oc4j\j2ee\OC4J_DBConsole\config\ does not exist...
Is there any way to retrieve or recover this file?
when I run the form and do some action intheform (call procedure , etc..) how can to see what is the process in running in OEM? Do it have any way to monitor it?
View 1 Replies View RelatedI am trying to install OEM but the GUI asks for weblogic server home.i checked many documents in net but none has weblogic installation procedure. Is it the sequence of installation ?
View 2 Replies View Relatedam trying to create a backup job in my UAT/testing instance, but with little success. I'm trying to create a backup job to disk (backup is to be stored in a drive local to the DB server) and it seems simple enough, but I keep getting the following error:
The job submission has failed for the following reason
ORA-06502: PL/SQL: numeric or value error: hex to raw conversion error ORA-06512: at "SYSMAN.DECRYPT", line 5 ORA-06512: at "SYSMAN.MGMT_CREDENTIAL", line 408 ORA-06512: at SYSMAN.MGMT_CREDENTIAL", line 1007 ORA-06512: at "SYSMAN.MGMT_CREDENTIAL", line 1400 ORA-06512: at SYSMAN.MGMT_JOBS", line 295 ORA-06512: at "SYSMAN.MGMT_JOBS", line 78 ORA-06512: at line 1
In "Recovery Settings", I have a "Flash Recovery Area Location" defined (path local to the DB -i.e. the server that the DB resides on), a "Flash Recovery Area Size" of 4 defined, and a Flashback Retention Time of 24 hours defined. Everything else is riding default values.
In "Backup Settings", there's nothing defined. Everything here is riding default values. As I understand it, not specifying a Disk Backup Location is fine so long as the Flash Recovery Area is defined. All the local services are turned on (scheduling, etc.).
If it's relevant, I mirrored the recovery/backup settings in UAT to the same as PROD, but changed what I needed to in order to accommodate the UAT environment (e.g. paths, etc.)
I want to manage my database remotely, through Internet. Is it possible to do that with OEM? Where can I find information related to this? Is there another monitoring software that allows me to perform this?
View 10 Replies View Relatedenctl is started but its status shows that EM Daemon is not running.What does it mean?And how can i reolve this error.
oracle@srv603484:~> emctl start dbconsole
TZ set to US/Pacific
Oracle Enterprise Manager 10g Database Control Release 10.2.0.1.0
Copyright (c) 1996, 2005 Oracle Corporation. All rights reserved.
[code]...