Enterprise Manager :: Network Adapter Could Not Establish Connection
Feb 25, 2011
I am trying to create a secure connection and getting the following error. I have tested the password via sqlplus and it works just fine.
oracle[/u01/app/oracle] emctl config emkey -repos -sysman_pwd
TZ set to US/Eastern
Oracle Enterprise Manager 10g Database Control Release 10.2.0.4.0
Copyright (c) 1996, 2007 Oracle Corporation. All rights reserved.
enter repository password..Invalid Password caught Exception java.sql.SQLException: Io exception: The Network Adapter could not establish the connection
View 2 Replies
ADVERTISEMENT
Aug 25, 2010
I have installed oracle 11g in my personal laptop, when i open the sql developer and try creating the new connection. am getting "The network adapter could not establish the connection".
View 2 Replies
View Related
Oct 1, 2012
I am getting the following error when trying to connect from sql developer, I can connect through command prompt and sqlplus to scott schema.
Error :
-------
An error was encountered performing the requested operation.
IO Error : The Network Adapter could not establish the connection
Vendor code 17002
Login details used in sqldeveloper
----------------------------------
Host name : 192.168.2.2
Port : 1521
service name : orcl
View 1 Replies
View Related
Jan 27, 2010
I have installed oracle 10g XE on my machine. And my machine's ip address is 10.10.50.50.
username:system
password:xxx
XE =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = 10.10.50.50)(PORT =1521))
[code]....
I was able to connect to the above server from my machine.But when i was trying to connect the above server from my neighbours system i am getting an error Network adapter could not establish the connection.
Note:when i ping the ip address 10.10.50.50 from my negihbours system in the command prompt
Reply from 10.10.50.50:bytes=32
Reply from 10.10.50.50:bytes=32
Reply from 10.10.50.50:bytes=32
Reply from 10.10.50.50:bytes=32
View 10 Replies
View Related
Oct 7, 2011
im failing to connect im this error- status:failure-lo exception:The network adapter could not establish the connection.
View 8 Replies
View Related
Oct 16, 2012
I am facing a problem with my oracle 10g enterprise manager. It is working properly with 64 bit windows 7 os with internet connection. without internet connection i cant start start the enterprise manager how can i resolve the issue and start the enterprise manager without internet.
View 12 Replies
View Related
Apr 5, 2011
I am trying to connect my oracle server with enterprise manager. But i have no network connection. What will be the probable listener config. ?
View 2 Replies
View Related
Sep 14, 2013
I have configured OEM and is up and running but, I am getting below error message when open the OEM URL.
Error Message:
Secure Connection Failed / an error occurred during a connection to rhel6:1158.
The page you are trying to view can not be shown because the authenticity of the received data could not be verified.
View 2 Replies
View Related
Mar 12, 2009
I have installed Oracle 10g database on my laptop. and when i login into Enterprise Manager I get the java error: "java.lang.Exception: IOException in sending Request :: Connection refused in the header of the homepage".
View 6 Replies
View Related
Jan 11, 2013
I have an application in VB6 that connects to an Oracle Database 10g with Oracle native ole db but win7 can not make the connection with a standard user, only makes the connection to a user with administrator permissions. The error that shows the application's rubbish eg @, H, etc.. only rare characters.
View 7 Replies
View Related
Aug 29, 2012
how can I connect via ftp to the xmldb-filesystem ?
I tried the instructions from this website [URL] ..... Now I can connect to the filesystem via "win7 shell ftp", but i cannot connect via "win7 explorer" using "ftp://host:port/foo/bar" or filezilla. Everytime i try i got an errormsg like:
filezilla: cannot read filesystem
and
win7
an error appears :
detail:
200 Type set to A.
277 Entering Passive Mode.... see sreenshot -> [URL]
View 2 Replies
View Related
Aug 27, 2012
In the recent past we have been observing the DB connection from application to database using ODBC is taking long time. When I fire LSNRCTL SERVICE command, for our instance the ESTABLISHED = count is being shown a huge number like 45000 and even more some times.
When we restart the instance suing shutdown immediate or abort commands. The established connections count is becoming 0 and again getting increased slowly. Once the count is reduced the connections are getting established quickly without any issue.
View 9 Replies
View Related
Aug 21, 2010
I am having a database running in my windows 2003 server and I want to configure Enterprise manager for that database to check the resource utilization during the peak hours and also the number of transactions...
View 1 Replies
View Related
Dec 20, 2010
i have already give the grant option cnnect,resource to scott but it is not connecting to enter prise manager console of Oracle database 11gR1. i am getting this error while connecting "The application requires more database privileges than you have currently been granted. Click on Help to get more version specific information"
when i am giving scott the dba rights then it is connecting. but i cann't give dba rights to scott.so, how/what is the specific command to give permission scott for connecting to enter prise manager console.
View 1 Replies
View Related
Feb 2, 2010
We have the Oracle Enterprise Manager Grid Control 10.2.0.5. We recently upgraded our Databases from 10.2.0.3 to 10.2.0.4 and since then we are having this problem.
Whenever i click an Agent on the Grid Control it gives me this error: "Communication between the Oracle Management Service host to the Agent host is unavailable. Any functions or displayed information requiring this communication link will be unavailable. For example: deleting/configuring/adding targets, uploading metric data, or displaying Agent home page information such as Agent to Management Service Response Time (ms)."
I get the same error when i try to configure a host or a database.
Don't know what is wrong
View 4 Replies
View Related
Aug 25, 2010
I'm using Oracle 11. I'm currently having some problem to start my Oracle database after database restore, hence unable to start my SAP application too.
> lsnrctl start
LSNRCTL for HPUX: Version 10.2.0.4.0 - Production on 25-AUG-2010 23:49:20
Copyright © 1991, 2007, Oracle. All rights reserved.
Starting /oracle/PRD/102_64/bin/tnslsnr: please wait...
TNS-12537: TNS:connection closed
TNS-12560: TNS:protocol adapter error
TNS-00507: Connection closed
HPUX Error: 29: Illegal seek
View 3 Replies
View Related
Mar 21, 2013
How to start EM on windows 7?
View 3 Replies
View Related
Aug 26, 2010
I have a client program that needs to communicate with another server program. My client program is implemented in PL/SQL using utl_tcp running on Oracle 9 while the server program is a 3rd party software running on Windows server 2003.
Basically my client program needs to send a request to the server, waits for the response (wait for the incoming string which ended /w chr(3) ) and then acknowledge (sending chr(6) ).
My problem is that if I wait for the chr(3) and then acknowledge. My send routine (l_sent := utl_tcp.write_text (g_conn, p_content) will raise a Oracle generic network error. It seems like the connection is closed. I checked /w the vendor and they said it might be I am taking too long to response ( I question timeout is the problem). I have also attempted to change my read routine from read_line to read_raw but it only make things worst. I cannot even read the complete string. At least with read_line, I can read back the entire string.
My current work around is to send out the ack before I receive the chr(3) (which is not recommended by our vendor).
View 5 Replies
View Related
Feb 18, 2011
My problem is i install Oracle 9i enterprise edition 9.0.1.1.1 in windows xp professional but at the time of oracle database confiuration assistent it show me following errors it show:
Not a zip file(End header not found)
View 1 Replies
View Related
Feb 12, 2013
I'm going to import a single database using FS to a RAC on ASM both are in same server running oracle 11.2.0.3. So I was wondering if can I use network link mode of impdp without setting up a listener using 10gb Ethernet interface ?
I don’t want to incur the overhead of the tcp network layer because both DB single and Rac are on the same server.
View 4 Replies
View Related
Feb 8, 2010
we have 5 database servers in different locations,
1.main database 10g(production) ip-192.1.1.1
2.standby for production 10g ip- 192.1.1.2
both are linux
3.another database 10g windows
4. another database 9i windows
both are in same location
5.new database 10g in linux ip-192.1.1.3
some other location
i m having a system windows xp installed
i m monitoring, all 10g by oracle enterpric manager
linux os monitor by Putty software
and i m monitoring below 10g database by sqlplus. now how could i monitor all the database by oracle enterprise manager grid control installed in my system that windows OS installed.
View 4 Replies
View Related
May 11, 2011
i have change my database name successful but after that when i open my enterprise manager i can open it but i cannot do anything in enterprise manager . i cannot show any tabs there.. i have attached my this enterprise manager login page here
View 12 Replies
View Related
Apr 30, 2013
I've a problem with Oracle Connection Manager and I've read the Oracle topic about it at URL.....but it doesn't work well...This is an image describes the diagram I want to configure URL.....
The IP for each machine is
Database Server : 192.168.0.150
Proxy Server : 192.168.0.153
client : 192.168.0.159
And these are the files for each machine.
1.Proxy server has 1 file
cman.ora
CMAN=
(CONFIGURATION=
(ADDRESS=(PROTOCOL=tcp)(HOST=192.168.0.153)(PORT=1521))
(RULE_LIST=
[code]....
2.Database server has 3 file, and for each one I've added some lines as following
tnsnames.ora
ORCL =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = localhost)(PORT = 1521))
(CONNECT_DATA =
(SERVER = DEDICATED)
(SERVICE_NAME = orcl)
[code].....
3.Finally the client has 2 files
tnsnames.ora
orcl=
(DESCRIPTION=
(SOURCE_ROUTE=YES)
(ADDRESS=(PROTOCOL=TCP)(HOST=192.168.0.153)(PORT=1521))
(ADDRESS=(PROTOCOL=TCP)(HOST=192.168.0.150)(PORT=1521))
(CONNECT_DATA=(SERVICE_NAME=orcl))
[code]....
ORA-12154: could not resolve the connect identifier specified: where I actually define my DB service (orcl) in the tnsname.ora...The output is showen here URL.....
View 1 Replies
View Related
Dec 4, 2011
I was trying to connect to a remote database from my client machine. Client machine runs a jsp code to connect to the database and execute a query. I have got oracle jdbc on my machine but still unable to connect to the database.
When checked in Google, i found that oracle connection manager has to be used to connect to the database from jdbc if the web server and database reside on different physical servers. But couldn't gather any further information regarding download and installation.
I do not have oracle connection manager on my system. I read in internet that it is shipped along with oracle 11g software. But i am not sure if that was the case in earlier version as well.
My question is where should i install oracle connection manager? (on database server or client machine) and is it possible to download and install only the connection manager as a stand alone so that i can connect to database from application?
View 3 Replies
View Related
May 6, 2011
I'm trying to install OMS on AIX and one of the prerequisites is JDK 1.6.0 SR6 but I couldn't find it in the IBM site, can some one tell me where can I download JDK 1.6.0 SR6?
View -1 Replies
View Related
Apr 3, 2013
I've tried to configure Connection Manager but i fails on TNS-04012: Unable to start Oracle Connection Manager instanceThis is my configuration (
CMAN1=(CONFIGURATION=
(ADDRESS=(PROTOCOL=tcp)(HOST=<hostname>)(PORT=1522))
(RULE_LIST=
(RULE=(SRC=*)(DST=<IP>)(SRV=*)(ACT=accept))))
[code]...
View 3 Replies
View Related
Sep 2, 2013
I am trying to start enterprise manager without success. i used to work after installation of db 10g but do day when i run the command below it fails. also i donot see any thing useful in the logs that am being directed to directory /oracle/Ora10R2/Orahome/localhost.localdomain_dse/sysman/log
[oracle@cdsdb ~]$ emctl start dbconsole
Oracle Enterprise Manager 10g Database Control Release 10.2.0.2.0
Copyright © 1996, 2005 Oracle Corporation. All rights reserved.
http://localhost.localdomain:1158/em/conso...boutApplication
Starting Oracle Enterprise Manager 10g Database Control .....
[code]....
View 1 Replies
View Related
Jul 2, 2010
I have two databases on the same oracle 11g install. The first (ORCL) database uses the default port for EM (1158). However, I don't know what the second one uses. I go to the portlist.ini file, but it only has the entry for the default (ORCL) database.
View 3 Replies
View Related
Sep 24, 2010
I tried to start my oem managing but got the following error.
[oracle@Eagle2 ~]$ emctl start dbconsole
OC4J Configuration issue. /home/oracle/app/product/11.1.0/db_1/oc4j/j2ee/OC4J_DBConsole_Eagle_boomiedb not found.
View 19 Replies
View Related
Oct 21, 2011
How can I use OEM remotely?
my DB server is on 172.17.1.4 IBM-AIX
and my computer is 172.17.1.53
Because I am tired of using sqlplus :@
View 2 Replies
View Related
