I have 2 questions :
1. How many oracle mechanism can link with oracle send mail mechanism ??
2. Any samples which the oracle send mail mechanism to run with some oracle alert mechanism.
SQL> conn system/sys@ORCL;
Connected.
SQL> @F:oracleproduct10.2.0client_5RDBMSADMINutlmail.sql
Package created.
Synonym created.
SQL> @F:oracleproduct10.2.0client_5RDBMSADMINprvtmail.plb
Warning: Package Body created with compilation errors.
Errors for PACKAGE BODY UTL_MAIL:
LINE/COL ERROR
-------- -----------------------------------------------------------------
319/5 PL/SQL: SQL Statement ignored
320/10 PL/SQL: ORA-00942: table or view does not exist
325/7 PL/SQL: SQL Statement ignored
326/12 PL/SQL: ORA-00942: table or view does not exist
I am using oel 5.8, oracle 11.2.0.3. The raw disk permissions are getting changed when the node gets rebooted.I am trying to use udev rule to change the permission permanently but its not working.
CODE[root@VM-PAGRAC3 rules.d]# more 99-asm.rules
KERNEL=="sd", BUS=="scsi", PROGRAM=="/sbin/scsi_id -g -u -s %p",*
RESULT=="SATA_VBOX_HARDDISK_VB7a29b7ae-de673b56_",
NAME+="oracleasm/disks/DSK1#" OWNER="grid"
GROUP="asmadmin" MODE="0660"
KERNEL=="sd*", BUS=="scsi", PROGRAM=="/sbin/scsi_id -g -u -s %p",
RESULT=="SATA_VBOX_HARDDISK_VB36f5d134-4e0e4c43_",
[code].....
Is there any rule in documentation, when create partition index? For tables, it is said to partition when table is greater than 2GB, but what about index? WHat size it should have to partition?
View 1 Replies View Relatedi used UTL_SMTP to send email. it works fine and send email. but when i used UTL_MAIL, its throwing below error
Error at line 1
ORA-29278: SMTP transient error: 421 Service not available
ORA-06512: at "SYS.UTL_SMTP", line 20
ORA-06512: at "SYS.UTL_SMTP", line 96
ORA-06512: at "SYS.UTL_SMTP", line 138
ORA-06512: at "SYS.UTL_MAIL", line 395
ORA-06512: at "SYS.UTL_MAIL", line 608
ORA-06512: at line 2;
i ran below
begin
utl_mail.send('abc.def@xyz.com',
'abc.def@xyz.com','Testing UTL_MAIL Option','blah blah blah');
end;
if utl_smtp is working, means SMTP server is configured properly. then why am i not able to get email using UTL_MAIL ?
utl_mail hav public grant.
also i smtp_out_server has value in v$parameter :
select * from v$parameter where name = 'smtp_out_server';
we are in the migration of oracle apps 11.5.9 [version] , while uploading AR open invoices we used auto accounting rule for revenue account , but we did this changes its not taking an effect , same revenue a/c we uploaded is uploaded , but the auto accounting is not taking an effect ,
for a work around we migrated the data ! but we would be the root cause and possibilities why it hasn't worked ?
But this auto accounting rule worked in CRP & UAT as well ...!!!
I am working on Workflow and the issue is When a person leaves for vacation he can set his vacation rules so that someone has to attend / approve his workflow notifications. But when we set vocation rules all notification goes into errors state and this error can resolve by refreshing/Retry this notification. And the error detail is mentioned below An Error occurred in the following Workflow.
Item Type = CONCSPL
Item Key = 086937-15990
User Key =
Error Name = 100
Error Message = ORA-01403: no data found
ORA-01403: no data found
Error Stack =
Wf_Engine_Util.Function_Call(cust_f_test.f_find_approver, CONCSPL, 086937-15990, 180198, RUN)
[code]....
Bottom line is all notifition should be successfully process and send to dedicated person.
Formatting the mail message sent using utl_mail, i have created one table and it has around 17 rows inside as sample and it may increase as well, my present email format is like very distorted and i have to have it as readable in single line .Please find below the code i have written along with test case, you may substitute your emailid and test, especially my main focus is on the lable aff.mark number where all the mark numbers are distorted and want to be arranged in line.I have attached the email format that i am getting at present also.
CREATE TABLE FAB_LOG ( MRK VARCHAR2(30))
INSERT ALL
INTO FAB_LOG VALUES ('1018017M-6001')
INTO FAB_LOG VALUES ('1018017M-6002')
INTO FAB_LOG VALUES ('1018017M-6003')
INTO FAB_LOG VALUES ('1018017M-6004')
[code]......
Using UTL_MAIL package.
My server version is:- 10.2.0.3.0
Here is the INIT Parameter file.
My question is, how it will affect if I configure the UTL_MAIL package by executing the Scripts ("utlmail.sql" and "prvtmail.plb")? And setting the Parameter SMTP_OUT_SERVER=''?
I developed a program to send e-mails from Oracle using both UTL_MAIL as well as UTL_SMTP. My requirement now is to send around 75,000 emails per day, When I tested for 1000 emails it is taking around 6 mins., Then for 75,000 it would be around 7-8 hours. Not to put the server busy for these many hours. Can we really send this much of e-mails from Oracle? UTL_MAIL is little faster than UTL_SMTP)
View 12 Replies View RelatedI am trying to send an email attachment using "utl_mail.send_raw" utility and not successful. Constantly I keep getting an error:
"ORA-20001: An error has occured: ORA-20001: ORA-06508: PL/SQL: could not find program unit being called
ORA-06512: at "APPOWNER.SANDEEP_CT_FILE", line 103"
I think it's emanating from "ORA-06508: PL/SQL: could not find program unit being called".
a) this morning my production dba " utlmail.sql in DEVELOPMENT as sys.
b) Create or replace directory TEMP_SANDEEP as '/u01/data' (This was created so that BFILENAME could read it + "dbms_lob.fileopen" needs to access this from Oracle directory and not Operating system directory)
c) 'u01/data' exists on Unix development box.
d) Then I created the following procedure to create a text file (text file's name is currentdate.txt i.e. 06062011.txt) that has some information. Once created, the UTL_MAIL.SEND_RAW should pick this file up and email this to concerned parties(and in this case it's me as I am doing this on development environment).
Code for the above is as follows:
CREATE OR REPLACE procedure sandeep_ct_file is
/*Variable declarations */
v_dir_location varchar2(100);
v_file_name varchar2(100);
v_file_handle UTL_FILE.FILE_TYPE;
v_report LONG := chr(10)||'Prog Code' ||' '||
[code]....
Do I have to defined SMTP connections and parameters?
I am using Oracle XE with SQL Developer to teach a course on databases.
The students complete a number of small projects. How can a student separate the projects so as to be able to open in SQL Developer only the tables pertaining to a specific project? Ideally, the student would be able to assign the same name to two tables that belong to different projects.
I know that this can be done by naming conventions and filtering, but this is awkward.
How to manage your archived log?
View 9 Replies View RelatedA Java program would call a sequence of 5 PLSQL procedures, and they all need to participates the Tranasction defined in Java.
What do I do for the transactions inside PLSQL to ensure all 5 pariticpate in the Java transaction? I suppose I just do not specify any COMMIT in the PLSQL, but that probably would not work as PLSQL would COMMIT by default after exiting the proc?
We just purchased NAS (Raid5) unit to manage our data storage. I am planning to create a virtual partition on this nas device and use one partition for oracle data storage and another virtual partition will be used by other data (files and may be sqlserver data files....etc..)
We will have oracle installed on seperate oracle server. Can we use RMAN to manage incremental backups in this environment? May main worry point is that our data storage device will have many different type of datas and will we be able to tell RMAN to make backups only from certain virtual drives?
We are using oracle 10g. with our code, Currently Oracle partitions are size the same way, each partition is using 10MB for data and 12MB for indexes (with the 6 default indexes); even of very few records are written in the partition.
We create partitions in advance as a part of nightly job with 10 minutes duration.Can some intelligence can be added where based on statistics we can decide the size of partition dynamically? Lot of space is getting wasted because of this reason.
I have successfully installed the Oracle 10g standerd version with a sample database on Windows server 2008 standard server. Then I installed the client so that I could use the Enterprise manage console that comes with it. Once installed, I was able to successfully configured the Net service. Now when I use either Enterprise manage console or SQL plus to login to the service that I created, once I enter the user id and password and click ok, system automatically closes both applications. I am not sure what is missing. I installed the same client on a windows XP pc and the enterprise manage console is working perfect.
View 1 Replies View RelatedI have a diskgroup with normal redundancy level (2 two failure groups) working fine. I desire add a new failgroup to diskgroup (changing the redundancy level to high).
Which ASM process will manage the copy of data to new failgroup? Are there some way to control or tuning this process?
My technical envirment is Winxp, dev9i AS vers9.0.2, Jinit vers1.3.1.9, OracleDB9i.
i want to create a form conatining a BEAN item through which i want to insert and select a BLOB movie from a Table in a database.
I upgraded my APEX instance from 4.1 to 4.2 and now I can't go to (INTERNAL) Manage Instance->Instance Settings I see only ORA-28817: PL/SQL function returned an error.
View 5 Replies View RelatedI have to manage an active passive cluster on SLES10 SP4. Oracle 10.2.0.4. All oracle binaries are on a DRBD Device on mountpoint /oradata. This mountpoint includes the binaries and all datafiles.
I havent installed these systems. At one stage on node died and got reinstalled by a system administrator. After a switch from the running node to the standby node, the cluster is not starting.
Jan 3 14:36:01 a logger: Cluster Ready Services waiting on dependencies. Diagnostics in /tmp/crsctl.6114.
Jan 3 14:36:14 a logger: Waiting for Oracle CSS service to be available before starting
Jan 3 14:36:14 a logger: ASM instance +ASM. Wait 2.
After issuing $ORACLE_HOME/bin/localconfig add the cluster is starting, the asm instance is coming up, and also the database instance is starting.
Shortly after that the db instance dies. Alert log is showing something like recursive sql error. Looks like writing to the datafiles is not working. In asmcmd the diskgroups are showing DISMOUNTED (show MOUNTED before)
so what to do ?
a) Why is it necessary to issue "localconfig add" to make the cluster starting ?
b) What could be a reason for not being able to write to the database ?
c) How to install an active/passive cluster ?
c1) Install OS on both nodes
c2) Install oracle binaries
c2.1) on both nodes in the local files system and do the mapping to the drbd afterwards?
c2.2) only on one node and just switch the mountpoint ?
I need to find out in DB Package where this Package is installed (in which schema). The problem is this DB Package can be installed in various schemas. This means that I can't use select user from dual or system environment SYS_CONTEXT('USERENV', 'OS_USER').
What I would need is something like $$PLSQL_UNIT
how to manage large number of record in ArrayList.i.e abc table has 20 million record and jvm size is 2 GB.
View 1 Replies View RelatedI'm developing, or trying, on Apex 4.2...The issue is about themes and how to manage the positions of diferents Display Points of a theme.
Everybody know that any theme have a map where its position all differents parts of this map (Body1, Body2, Body3, position01, position02 and so). So when you choice any theme, it come with all this Display points defined. You can see this map rendering any region page and in the item Display Point you can see this map clicking on the light.
There is anyway to can manage this map and change position or behavior of those points?. For example , I'm interested that under the tabs, to have at the same height, 3 diferentes position, one at left, one at center and other at right.
I would like to change the printing settings in my workspace Instance settings. But, I can't find the "Manage Instance" option mentioned in the tutorials.
View 4 Replies View RelatedI have a package with several procedures which raise and catch an error if a foreign key constraint has been violated. I put the the following code in my package body:
e_ouder_niet_gevonden EXCEPTION;
PRAGMA EXCEPTION_INIT(e_ouder_niet_gevonden,-2291);
Now all the procedures inside the package which catch this exception in the EXCEPTION block work fine. I would like to be able to use that exception outside of my package as well though, how would I do this?
I am trying to create a database link from the 11g database to the 10g database using:
create database link ORCL10R2 connect to <username10g> identified by <password10g> using <db10g>;
It Returns
Database link created.
select sysdate from dual@ORCL10R2 returns error:
ERROR at line 1:
ORA-12504: TNS:listener was not given the SERVICE_NAME in CONNECT_DATA
what changes I need to make to tnsnames and listener at both servers.
I am newbie to oracle database.
I am using oracle 9i version and in EMCA satndalone application . I have created database links.
The database links have been created, and three databases are local.
When i am pressing the test button in emca . It gives notification database link not active.
What should i do?
i just bought the oracle scripts from rampant. any know how long will it take for me to get the download link. for these scripts...
View 3 Replies View Relatedthe following problem. am using oracle forms 6i on windows 2003 server.
I have two tables Loan and deduction
Loan(
loan_number number(5)unique not null,
loan_name varchar(15)not null,
loan_type varchar(15)not null,
actual_amount number(10)not null,
[Code]....
Both have loan_number columns as the primary key.
I created two separate forms using loan table and Deduction table.
Also according to requirement, when commiting in the loan form ,if 'loan_purpose' is 'PERSONAL' THEN deduction form SHOULD BE OPENED.
I MANAGED TO DO ALL OF THE ABOVE .
WHAT I WANT IS when deduction form pops up, it should have a matching loan_number as in loan form What shall I do to achieve this???.