Formatting the mail message sent using utl_mail, i have created one table and it has around 17 rows inside as sample and it may increase as well, my present email format is like very distorted and i have to have it as readable in single line .Please find below the code i have written along with test case, you may substitute your emailid and test, especially my main focus is on the lable aff.mark number where all the mark numbers are distorted and want to be arranged in line.I have attached the email format that i am getting at present also.
CREATE TABLE FAB_LOG ( MRK VARCHAR2(30))
INSERT ALL
INTO FAB_LOG VALUES ('1018017M-6001')
INTO FAB_LOG VALUES ('1018017M-6002')
INTO FAB_LOG VALUES ('1018017M-6003')
INTO FAB_LOG VALUES ('1018017M-6004')
[code]......
CREATE OR REPLACE PROCEDURE A516907.proc_data_T_DTIA_TS_ADDR is cursor CSR1 IS SELECT * FROM T_DTIA_TS_ADDR ; v_file UTL_FILE.FILE_TYPE ; BEGIN v_file := UTL_FILE.FOPEN( 'DATA_PUMP_DIR' , 'T_DTIA_TS_ADDR.txt','w',32767); FOR CS1 IN CSR1
[Code]....
The procedure above is dynamically generated. It's simple enough in that I am calling "the parent procedure" by passing the table name in. After this the procedure for creating the output data file for that table is generated and that's what we have above. I am doing this to load data into DB2.
What I need is to be able to generate the output such that if the column is of type varchar, char (anything non numeric) then the data should have " around it. If the data is of type number it should not have ".
I suppose I could use something as follows in lieu of the procedure above
Declare cursor c1 is select column_name, data_type from user_tab_Cols where table_name = 'Table Name here';
-- I would like to know how to use the utl_file.put_line -- where if the column data type is varchar 2 -- I could get ' ||"|| CS1.TS_ADDR_TY_CD||" || ' -- and if it's a number -- || CS1.CB_TS_DTIS_ID ||
i used UTL_SMTP to send email. it works fine and send email. but when i used UTL_MAIL, its throwing below error
Error at line 1 ORA-29278: SMTP transient error: 421 Service not available ORA-06512: at "SYS.UTL_SMTP", line 20 ORA-06512: at "SYS.UTL_SMTP", line 96 ORA-06512: at "SYS.UTL_SMTP", line 138 ORA-06512: at "SYS.UTL_MAIL", line 395 ORA-06512: at "SYS.UTL_MAIL", line 608 ORA-06512: at line 2;
i ran below
begin utl_mail.send('abc.def@xyz.com', 'abc.def@xyz.com','Testing UTL_MAIL Option','blah blah blah'); end;
if utl_smtp is working, means SMTP server is configured properly. then why am i not able to get email using UTL_MAIL ?
utl_mail hav public grant.
also i smtp_out_server has value in v$parameter :
select * from v$parameter where name = 'smtp_out_server';
My server version is:- 10.2.0.3.0 Here is the INIT Parameter file.
My question is, how it will affect if I configure the UTL_MAIL package by executing the Scripts ("utlmail.sql" and "prvtmail.plb")? And setting the Parameter SMTP_OUT_SERVER=''?
I developed a program to send e-mails from Oracle using both UTL_MAIL as well as UTL_SMTP. My requirement now is to send around 75,000 emails per day, When I tested for 1000 emails it is taking around 6 mins., Then for 75,000 it would be around 7-8 hours. Not to put the server busy for these many hours. Can we really send this much of e-mails from Oracle? UTL_MAIL is little faster than UTL_SMTP)
1. How many oracle mechanism can link with oracle send mail mechanism ?? 2. Any samples which the oracle send mail mechanism to run with some oracle alert mechanism.
I am trying to send an email attachment using "utl_mail.send_raw" utility and not successful. Constantly I keep getting an error:
"ORA-20001: An error has occured: ORA-20001: ORA-06508: PL/SQL: could not find program unit being called ORA-06512: at "APPOWNER.SANDEEP_CT_FILE", line 103"
I think it's emanating from "ORA-06508: PL/SQL: could not find program unit being called".
a) this morning my production dba " utlmail.sql in DEVELOPMENT as sys.
b) Create or replace directory TEMP_SANDEEP as '/u01/data' (This was created so that BFILENAME could read it + "dbms_lob.fileopen" needs to access this from Oracle directory and not Operating system directory)
c) 'u01/data' exists on Unix development box.
d) Then I created the following procedure to create a text file (text file's name is currentdate.txt i.e. 06062011.txt) that has some information. Once created, the UTL_MAIL.SEND_RAW should pick this file up and email this to concerned parties(and in this case it's me as I am doing this on development environment).
Code for the above is as follows:
CREATE OR REPLACE procedure sandeep_ct_file is /*Variable declarations */ v_dir_location varchar2(100); v_file_name varchar2(100); v_file_handle UTL_FILE.FILE_TYPE; v_report LONG := chr(10)||'Prog Code' ||' '|| [code]....
Do I have to defined SMTP connections and parameters?
DECLARE JOBSFILE UTL_FILE.FILE_TYPE; -- TAKE ALL JOB TITLES FROM JOBS CURSOR JOBSCUR IS SELECT * -- DDOCNAME,DDOCTITLE,DSECURITYGROUP,DDOCAUTHOR,DDOCTYPE,DINDATE,PRIMARYFILE,EXTRACTIONDATE,BATCH_ID FROM TARGET_UCM ; [code].......
this is my plsql here to print table values i am using many utl_file.put_line statements is there any way to print all table values in a single utl_file.put_line.
I am trying to develop a PL/SQL function to perform some data cleansing. One of the data cleansing requirements is If there are instances of more than 1 space together, the extra spaces should be removed.Say for example, if my data comes in as "123 456 789", then my function should clean it as "123 456 789" replacing multiple spaces with just 1 space.
What PL/SQL functions could I use to accomplish this?
I have the age of a property stored in my DB. (Lets say 3 yrs old). I would like to extract from that information, the year the property was built. I know I can minus the sysdate by days (-1) and months (add_months), but how can I do it using the YEAR information I have stored?
So if I was doing it against sysdate, I would want the result to be 10/24/2003.
i have a problem with my SQL programming which i am learning at the moment. Currently here is my Show how many orders were placed in each month of 2012. (group by question, to char function)
select count(orderdate) from csorder group by orderdate;
How to make the multiple lines of character in single line. Below is the example where i am getting the value when we export the data from the database table.
---------------------- Welcome Aboard customer contact based on Account activation.
The current selection criteria for Welcome Aboard is based at the service level. Therefore, each time a customer connects a service, Welcome Aboard material is mailed to the customer. This is causing the following problems;
Customer complaints. If a service or a number of services are connected on a particular day, it will result in (ie except for some minor exclusions) a single Welcome Aboard pack being sent to each individual customer. As you can expect for corporate accounts, they receive a high volume of this material. Other problems occur when, service/s are deactivated and reactivated, each time a Welcome aboard pack will be distributed.
High costs to Telstra. Each MNET service connected may produce a Welcome aboard pack. This volume of material currently costs Telstra over $500,000 per quarter for Welcome Aboard alone.
------------------------------
here is what i want to the above data to export:
---------------------- Welcome Aboard customer contact based on Account activation.The current selection criteria for Welcome Aboard is based at the service level. Therefore, each time a customer connects a service, Welcome Aboard material is mailed to the customer. This is causing the following problems;Customer complaints. If a service or a number of services are connected on a particular day, it will result in (ie except for some minor exclusions) a single Welcome Aboard pack being sent to each individual customer. As you can expect for corporate accounts, they receive a high volume of this material. Other problems occur when, service/s are deactivated and reactivated, each time a Welcome aboard pack will be distributed. High costs to Telstra. Each MNET service connected may produce a Welcome aboard pack. This volume of material currently costs Telstra over $500,000 per quarter for Welcome Aboard alone.
I am currently doing a project where i need to write a stored procedure which will be doing the following-
i)it will retrieve multiple columns from multiple tables in a single database(through join) based on certain conditions II)then it will store the entire data in a certain field(File_data) of staging table
inside file_data a header and a trailer will be present with the records.also the field values will be pipe separated and a new record will start in a new line.
So,the data inside the file_data of staging table will look like this-
I have a query then I write it to a text file using utl_file. However, I'm having some trouble formatting the data itself on the text file. =( How would I align these records against its header considering the length of the Name/subscriber no. column which is not constant. Would LPAD work?
ID Name Subscriber No
1 James Smith 12454654 123 Scott Kevin Joseph 4564564 21 Dana Marice Curtis 455 2 Stephanie Hans Walter 23134
I want to make a report which is formated (rebuilding an older tool in Access).
So on the one hand I need some formattings which I implemented with the search bar in the interavtive report. (content of the first column is the heading for a table with the rest of the content of all rows which have the sam content in the first column) On the other hand I don't want to show the headings of the columns, what I solved with the classic report(report attributes/ column attributes: none). Is the a solution to match these two requirements in one report?
Currently I have a requirement where I need to create 2 more output rows using each result row.
In my requirement I am populating charges table with types of charges, on each line item of charges, I need to apply 2 types of taxes and populate it along with the charge line item. I will be storing charges in table charges and the 2 taxes to be applied in taxes table respectively. For each row of charges, i need to apply these 2 taxes present in taxes table resulting in 3 rows output.
I have a Number(18,0) datatype.It could have millions/billions stored in that field.How can I show that amount in the form of $7,123,787 ($ sign and commas)?
By using To_char function like below, I am not getting the desired format.
Select to_char(123000000.25, '$9,9999999999.00') FROM dual;
I have a workbook in Discoverer which is not formatted correctly when I export it to excel. I have to re-size the columns and also adjust the height of the rows to see the data clearly.
Is there a way I can export the report without having to make these changes all the time?
I am using the cloud version of APEX for a college course. The database script I am trying to load has dates formatted in "DD-MON-RR" and I receive 'not a valid month' and 'a non-numeric character was found where a numeric was expected'. Is there a workaround in APEX for this? I'm trying to avoid changing thousands of lines of data.
I have developed one report but need one formatting suggestion. There is one field called "DESCRIPTION", I want the value of this field to be displayed in a single line. Now the big values are wrapped into multiple line.
Now,
DISPLAY ---------------- This is a Oracle Report.
I want, DISPLAY ------------------------ This is a Oracle Report.
,Is there a way to make Interactive reports break format work/look like classic reports break format? i.e.1st,2nd,3rd column option. The way IR breaks is that is reserves a whole row for the column used in the break, which is not what I want, I want the report to look like the following:
city emp sal Chicago John Miller 1500 Mark Horton 2000 Denver Rob Martino 1200
I tried to use rollup queries which work fine except that it does not do exactly what I want when I sort columns through the front end , I am basically displaying a check box for grouped records ( and I want it to display at the first record of each group), so the order is important. for example:
checkbox City emp sal[ ] Chicago John Miller 1500 Mark Horton 2000[ ] Denver Rob Martino 1200
