I am newbie to oracle database.
I am using oracle 9i version and in EMCA satndalone application . I have created database links.
The database links have been created, and three databases are local.
When i am pressing the test button in emca . It gives notification database link not active.
What should i do?
creating the standby database from Active database using RMAN and getting the below issue after i executed the duplicate command.
Version of Database:11g(11.2.0.1.0)
Operating System:Linux 5
Error:
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03002: failure of Duplicate Db command at 12/21/2012 17:26:52
RMAN-03015: error occurred in stored script Memory Script
RMAN-04006: error from auxiliary database: ORA-12514: TNS:listener does not currently know of service requested in connect descriptor
[code]....
provide any work arounds to proceed further in creating the standby database.
I have failed to duplicate target db for standby from active db using spfile with the following errors:
RMAN-03009: failure of backup command on prim1 channel at 08/11/2010 05:25:09
ORA-19558: error de-allocating device
ORA-19557: device error, device type: DISK, device name:
ORA-17627: ORA-01041: internal error. hostdef extension doesn't exist
[Code].....
The script has successfully created on standby db all controlfiles and also has copied 2 data files DATA01.DBF and DATA02.DBF into the correct location. Then the errors above kicked in and stopped the rman dup process.
I am getting starting with rac environments. I need to configure a two nodes active/active with rac and I need to know if always using rac both nodes will be active or if I have to do that at some point when installing. I have reading some docs from oracle and others authors about rac and its configuration process but that is not understood for my yet.
View 5 Replies View RelatedI've got a physical standby database and I'm now licensed for Active DataGuard. I would like to automate the ALTER DATABASE RECOVER MANAGED STANDBY DATABASE DISCONNECT FROM SESSION command to be executed right after the STARTUP command so that whenever the database is started by our DBSTART script, it activates READ ONLY W/APPLY immediately after start without manual intervention. This is probably simple, but I figured I'd ask before starting to pore through documentation.....!
View 6 Replies View RelatedI'm trying to set up Active Database Duplication between 2 Oracle 11g servers. Each server is identical, with the following characteristics:
- OS: Windows Server 2008
- Version: Ora11R2 (64 bit)
- DB Name: orcl
- Filesystem: asm (using grid infrastructure)
In addition, each server has been configured with the same sys passwords. The databases themselves were configured during installation (so the setups are about as basic as you can get.)
Now, I've done all sorts of research into how to do this. I've found plenty of good sources, but they seem to all have differences in the details.Here's what I've done so far:
- The TNSNames.ora file on each server has an entry for 'src' and 'dest' (sourca and destination) respectively
- I created an entry named 'SID_LIST_LISTENER' in the listner.ora file on the source machine. However, should the sid_name in this entry refer to the source or destination machine? Or does this listener entry belong on the destination machine instead?
- A lot of the examples require the setup of a new password file and spfile. Are these entries necessary if I'm using the same file structures/user names/etc. on both servers?
I have issue with regards to duplication of an active (prod) database to a test database. This is my sql run by RMAN:
SPOOL MSGLOG to '/proddb/u01/app/dupe.log';
CONNECT target sys/oracle;
CONNECT auxiliary sys/oracle@MWTEST;
CONFIGURE DEFAULT DEVICE TYPE TO DISK;
RUN {
duplicate target database to MWTEST from active database;
}
CONFIGURE DEFAULT DEVICE TYPE TO SBT_TAPE;
It stops however in the middle and wouldn't continue. There is still huge space for the test database (3x the current size of prod database).
I have a active data guard database which is copy of my production database. can i backup the active database using RMAN? The ADG is a read only and dont know, if RMAN can backup an read only database.
View 4 Replies View Relatedi would like to import a table from another database by using database link.
impdp muba/muba tables=FUNCTION_NO directory=testdump NETWORK_LINK=DBLINK1
i created the public database link as system user
it gave error like
Import: Release 10.2.0.1.0 - Production on Wednesday, 17 March, 2010 11:07:02
Copyright (c) 2003, 2005, Oracle. All rights reserved.
Connected to: Oracle Database 10g Release 10.2.0.1.0 - Production
Starting "MUBA"."SYS_IMPORT_TABLE_01": muba/******** tables=FUNCTION_NO directory=testdump NETWORK_LINK=DBLINK1
Estimate in progress using BLOCKS method...
Processing object type TABLE_EXPORT/TABLE/TABLE_DATA
[code]....
after that i try to import as system user like
impdp system/passwd tables=FUNCTION_NO schemas=muba directory=testdump NETWORK_LINK=DBLINK1
but error like
Import: Release 10.2.0.1.0 - Production on Wednesday, 17 March, 2010 11:27:43
Copyright (c) 2003, 2005, Oracle. All rights reserved.
Connected to: Oracle Database 10g Release 10.2.0.1.0 - Production
UDI-00010: multiple job modes requested, schema and tables.
when i use IMP utility
imp system/passwd file=dump.dmp fromuser=userA touser=userB log=dmplog.log but when i use IMPDP what is the parameter equal to fromuser & touser
I'm trying to set up active database duplication between 2 Oracle 11g servers.
Both servers were set up with identical configurations (same directory structures, file systems, SIDs, and sys passwords.) Both oracle instances were created at the time of software installation.
Here is how things are configured:
- Version: Ora11gR2
- Oracle service name: orcl
- File system: ASM
- OS: Windows Server 2008
I've done some research and found several sources giving instructions on how to set up active database duplication (including a blog engry by rajabaskar on this site), but each site seems to have different details.
So, here's what I have so far:
- Set up entries in each TNSNames file... each has an entry 'src' and 'dst' (for source and destination)
- A new listener has been added on the source machine
- on the destination machine, run the 'oradm' to create a new SID. However, is this really necessary? Since the service names are already the same
- I'm also supposed to create a password file on the destination machine using orapwd. Again, is this necessary, if I'm using the same passwords on both machines?
Am I on the right track? Should I have created an actual database on the destination machine or should I have started with just the software installed?
I'm checking the possibility to use Active Directory to log on the our Oracle databases. But only for dba's and developers, not application users. We use Oracle 10.2.0.4 (and soon 11g) As OS on the databaseserver we use AIX5L 5.3
Is it possible to implement Active Directory on databases running on AIX ? If it is possible, what must be done to get it to work, software ... etc ?
I have a table in Oracle with a column userid and i have a userid column in Active Directory. based on this i want to query the Network ID and update in one of the Group in the Active Directory. how to get the results?
View 2 Replies View RelatedIs it possible to use Database authentication in APEX through database link, and how?Also is it posible to read roles from users through database link?
View 3 Replies View Relatedfindout and to fill up the excel which lists down the Database schemas and states whether they have in active / or not.
Active state may be determined whether it has been used for the last 3 months or so. The last updated time may be a good indicator of the same.
How to access Active directory(Microsoft 2003) with oracle database 11g.
View 1 Replies View RelatedServer:
Windows 2008 R2 x64
Oracle Database 11g Release 11.2.0.1.0 Standard Edition
I recently applied the Oracle® Database Server Version 11.2.0.1 Patch 16 I have several databases running on this box with the same application.Since then I've had lots of customers complaining about slow systems. The server has plenty of RAM availableI also have several other servers all on the same versions, same patch, running the same application with no issues.
Looking at v$session there are often lots of active sessions that have a sql_address of "00". I've never seen this before and I regularly look at v$session, as you can see for below these have been running for a while. The sessions do drop off but I am at a loss as to what is happening.
select username, last_call_et, sid, serial#, user#, status, sql_address, sql_hash_value
from v$session
where username is not null and status = 'ACTIVE'
order by last_call_et desc, sid
[code]...
I like to duplicate the database DATABASEA to DATABASEB and need to be run in same server. I tried to bounce the listener & databaseb instance multiple times but no lucky.
Step 1 : The instance DATABASEB is in Nomount stage
Step 2 :
==> tnsping DATABASEB
TNS Ping Utility for Linux: Version 11.2.0.2.0 - Production on 11-SEP-2012 07:36:54
Copyright (c) 1997, 2010, Oracle. All rights reserved.
Used parameter files:
Used TNSNAMES adapter to resolve the alias
Attempting to contact (DESCRIPTION = (ADDRESS = (PROTOCOL = TCP)(HOST = client )(PORT = 1521)) (CONNECT_DATA = ( SERVER = DEDICATED) (SERVICE_NAME = DATABASEB)(UR=A)))
OK (10 msec)
Step 3 :
==> rman target sys/*****@DATABASEA auxiliary sys/********@DATABASEB
Recovery Manager: Release 11.2.0.2.0 - Production on Tue Sep 11 07:37:50 2012
Copyright (c) 1982, 2009, Oracle and/or its affiliates. All rights reserved.
connected to target database: DATABASEA (DBID=1723462779)
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
[code]...
We are using oracle as database in our application. For high availability we have a cluster of multiple nodes and the data is replicated using oracle streams. All the nodes in the cluster are active. We do not have any concept of stand-by.
Now we are planning to use oracle RMAN for backup and recovery. RMAN user's guide doesn't recommend any strategies for such deployments. It mainly focuses on primary/stand-by deployments.
I have oracle 10g up and running on Solaris 10, from windows I would like to connect to sql plus through windows authentication, for that I have already made sure that remote_auth = true and have created user in oracle with OPS$. But still I cannot connect.
I have the same setup but with oracle on windows server, the os authentication from windows clients works just fine.
does oracle 10g on solaris 10 supports windows os authentication?
I am trying to create a database link from the 11g database to the 10g database using:
create database link ORCL10R2 connect to <username10g> identified by <password10g> using <db10g>;
It Returns
Database link created.
select sysdate from dual@ORCL10R2 returns error:
ERROR at line 1:
ORA-12504: TNS:listener was not given the SERVICE_NAME in CONNECT_DATA
what changes I need to make to tnsnames and listener at both servers.
A procedure in a package uses a database link. The database link is defined without a username and a password. The user that uses the database link is supposed to be present in the opposite database as wel.
When the procedure is started in SQL*Plus or TOAD it runs perfect. But the procedure has to run in a scheduled job. And that doesn't work. The procedure fails because of: ORA-01017 invalid username/password. The user that is used to run the scheduled job is the right one.
I have installed oracle database 11gr2 in laptop1 and installed oracle database 11gr2 in laptop2.Both the laptop's are connected to same internet connection through wifi. So my question is can i create a database link between these two databases using this wifi? give some steps in creation of a database link.
View 13 Replies View Relatedi need access to a view running on another database server. i configured my db link and tried to compile the view. but the following message occurs: ora-12154: TNS: Connection Identifier..
View 16 Replies View RelatedI found a link to a topic concerning this issue (click here), but the question mentions that the poster was looking for a "band-aid" fix...if this method will work for a more long-term solution
View 1 Replies View RelatedUsually where should we create the database link? In the production or development? create public database link dblinkname connect to user_in_db2 identified by password_in_db2 using 'tnsentry name in db2'; In production or development?
View 2 Replies View RelatedI am trying to create a database link from the 11g database to the 10g database using:
create database link ORCL10R2 connect to <username10g> identified by <password10g> using <db10g>;
It Returns
Database link created.
select sysdate from dual@ORCL10R2 returns error:
ERROR at line 1:
ORA-12504: TNS:listener was not given the SERVICE_NAME in CONNECT_DATA
what changes I need to make to tnsnames and listener at both servers.
Is it possible create dynamically database link within procedure.
It give me the following error
ORA-01031: insufficient privileges
But i can drop database link within procrdure.
Is there any way to do this?
I have a staging which connects to RAC clusters via dblink..I have a scenario to collect the hostname,systimestamp whenever i do a query from this rac clusters
So in general below would be cool
select UTL_INADDR.GET_HOST_NAME,sysdate,x,y,z from gv$symmetric would work perfect
But on dblink..
select UTL_INADDR.GET_HOST_NAME,sysdate,x,y,z from gv$symmetric@dblink.is returning local timestamp and hostname which is not intended
So i even tried subquery..
select (select host_name,systimestamp from v$instance),t UTL_INADDR.GET_HOST_NAME,sysdate,x,y,z from gv$symmetric@dblink
this would work in certain case ...But it certain cases it would throw an error saying mutiple rows from asubquery .All ineed is to get hostname,systimestamp append to all sql i fetch from any this rac clusters through this dblinks.
in a 9.2.0 db I create a db link but does not function :
CREATE DATABASE LINK "ONEDB"
CONNECT TO "user1" IDENTIFIED BY "****" USING 'ONEDB';
SQL> select * from dual@"ONEDB";
select * from dual@"ONEDB"
*
ERROR : ORA-12154: TNS:could not resolve service nameBut on the same server I can connect to 11g in sqlplus :
Z:>sqlplus /nolog
SQL*Plus: Release 11.2.0.3.0 Production on Mar. Juin 19 10:13:45 2012
Copyright (c) 1982, 2011, Oracle. All rights reserved.
SQL> connect user1@ONEDB
password :
Connected.Of cours the other DB links toward 9.2.0 databases work well.