I have installed oracle database 11gr2 in laptop1 and installed oracle database 11gr2 in laptop2.Both the laptop's are connected to same internet connection through wifi. So my question is can i create a database link between these two databases using this wifi? give some steps in creation of a database link.
View 13 Repliesi would like to import a table from another database by using database link.
impdp muba/muba tables=FUNCTION_NO directory=testdump NETWORK_LINK=DBLINK1
i created the public database link as system user
it gave error like
Import: Release 10.2.0.1.0 - Production on Wednesday, 17 March, 2010 11:07:02
Copyright (c) 2003, 2005, Oracle. All rights reserved.
Connected to: Oracle Database 10g Release 10.2.0.1.0 - Production
Starting "MUBA"."SYS_IMPORT_TABLE_01": muba/******** tables=FUNCTION_NO directory=testdump NETWORK_LINK=DBLINK1
Estimate in progress using BLOCKS method...
Processing object type TABLE_EXPORT/TABLE/TABLE_DATA
[code]....
after that i try to import as system user like
impdp system/passwd tables=FUNCTION_NO schemas=muba directory=testdump NETWORK_LINK=DBLINK1
but error like
Import: Release 10.2.0.1.0 - Production on Wednesday, 17 March, 2010 11:27:43
Copyright (c) 2003, 2005, Oracle. All rights reserved.
Connected to: Oracle Database 10g Release 10.2.0.1.0 - Production
UDI-00010: multiple job modes requested, schema and tables.
when i use IMP utility
imp system/passwd file=dump.dmp fromuser=userA touser=userB log=dmplog.log but when i use IMPDP what is the parameter equal to fromuser & touser
Is it possible to use Database authentication in APEX through database link, and how?Also is it posible to read roles from users through database link?
View 3 Replies View RelatedI am having a template file (only .dbt file) to create the database instance.I Kept it in $ORACLE_HOME/assistant/dbca/template/,after running DBCA it was loaded with details mentioned in it ,but at the second last step when i try to see initialization parameters control file ,datafile and tablespace detail was not mentioned.when it started database creation ,got hanged on 5% completion showing failure in processing system parameters. Is it the right way to create database using DBCA?what should I do to create database using template?
View 1 Replies View RelatedCreating RAX 9.2.0 on SP2-AIX-4.3.3 64 bit hangs (2 node configuration) tablespacess are on VSD/raw partitions.
View 3 Replies View Relatedwhen i connected with oracle user i got error message like "
ERROR:
ORA-06550: line 1, column 7:
PLS-00201: identifier 'DBMS_APPLICATION_INFO.SET_MODULE' must be declared
ORA-06550: line 1, column 7:
PL/SQL: Statement ignored
"
i am working on a project that requires the creation of a object relational database. A number of different methods are required in order to insert different toy types into the appropriate toy related Object Table(s). Within this there will be the following fields:
Toy_name
Cost
Age_Range
rdy_allocation
and then some more specific information. The specific information for each toy is:
Toy_Type.
The toy_type can be electronic, game, or wooden.
For electronic I need to store Battery_Type and Number_of_Batteries.
For type Game, I need to store, Type, this could card_game, board_game or other_game.
For type wooden, I need to store Painted(Y/N).
The toys are requested by a child and created by elfs. This information also needs to be recorded but im more concerned with the creation of the toy class itself first. Now this was my first attempt at the solution but I cant seem to link the specific toy information into the same table. Will i have to create three separate tables then link them together?:
DROP TABLE TOY_OBJTAB;
DROP TYPE electronic_toy;
DROP TYPE wooden_toy;
DROP TYPE board_toy;
DROP TYPE toy_typ;
[code]....
During the database installation the two nodes after all the prerequisite check and copy of files i am getting the below error message
"Template4 General_Purpose.dbc does not exist. Please specify an existing template for database creation".
How can i overcome this error ? I am installing Oracle 11g R2 11.2.0 On Oracle Enterprise Linux (5.1.19) running on [Oracle Virtual Box 4.1.12 ]. Also what are the steps to uninstall the previously installed db_home1 which failed due to this error.
I am trying to create a database link from the 11g database to the 10g database using:
create database link ORCL10R2 connect to <username10g> identified by <password10g> using <db10g>;
It Returns
Database link created.
select sysdate from dual@ORCL10R2 returns error:
ERROR at line 1:
ORA-12504: TNS:listener was not given the SERVICE_NAME in CONNECT_DATA
what changes I need to make to tnsnames and listener at both servers.
During ASM Disk Groups creation after the ASM instance creation, receive the following error: Disk Group ORAASMGROUP2 already exists. Cannot be created again
The Grid infrastructure was deinstall one time and still the same issue.
manual DB creation.I gone through the below steps:
1) created appropriate folders.
2) Copied a PFILE from an existing DB and changed the contents like DB name etc...
3)Then I Created a text file called %ORACLE_HOME%DATABASEinitmuktha.ora with the following contents: ifile=c:pragpfileinitmuktha.ora
4) Then i set Oracle SID (Through Environment variable in MY COMPUTER --> PROPERTIES...)
5) Then I Created a Windows service for the DB.
6) startup nomount pfile= c:pragpfileinitmuktha.ora
7) Then I ran the database creation command.
The DB was created but when i log in again, it is looking for the pfile in the another DB's location rather than from "%ORACLE_HOME%DATABASE". Where i missed out to create new oracle_home folder?
Is it possible to create Dictionary Tablespace creation in 10g database?
View 5 Replies View RelatedI try to install RAC with 2 nodes OEL 5.8.
GI 11.2.0 is installed...The installation of the database crashed in dbca.
When I tried to rerun, I got: PRCD-1121: Speciffied server pool RAC for RAC is already hosting an administrator-managed configuration for database(s) RAC
I was able to create the standby database on different server with the same name for the primary and standby database but I want to know that can I create a standby database with different database name than that of the primary database server.
View 1 Replies View RelatedWhile Creating database on AIX Machine using DBCA utility I am getting following error
Error Details:
-------------------------------------------------------------------------------------------------------------------
Allocating device....
Specifying datafiles...
Specifing datafiles...
Restoring ...
[code]....
I am newbie to oracle database.
I am using oracle 9i version and in EMCA satndalone application . I have created database links.
The database links have been created, and three databases are local.
When i am pressing the test button in emca . It gives notification database link not active.
What should i do?
A procedure in a package uses a database link. The database link is defined without a username and a password. The user that uses the database link is supposed to be present in the opposite database as wel.
When the procedure is started in SQL*Plus or TOAD it runs perfect. But the procedure has to run in a scheduled job. And that doesn't work. The procedure fails because of: ORA-01017 invalid username/password. The user that is used to run the scheduled job is the right one.
i need access to a view running on another database server. i configured my db link and tried to compile the view. but the following message occurs: ora-12154: TNS: Connection Identifier..
View 16 Replies View Relatedi am creating database manually in oracle 9i os version ibm-aix5.3 it showing following error
CREATE DATABASE "varathu"
*
ERROR at line 1:
ORA-01501: CREATE DATABASE failed
ORA-00200: controlfile could not be created
ORA-00202: controlfile: '/backup/varathu/control01.ctl'
ORA-27040: skgfrcre: create error, unable to create file
IBM AIX RISC System/6000 Error: 13: Permission denied
I want to know what is the difference between the file catproc that we run after creation of the database in the Oracle 9i,10g and 11g r2. I have run that file in 11g R2 but it is taking more time and more over there are many new things that i saw in 11g R2 than what were there in 9i and 10g.
View 11 Replies View Relatedhow to create database manually(without dbca).
View 2 Replies View RelatedI found a link to a topic concerning this issue (click here), but the question mentions that the poster was looking for a "band-aid" fix...if this method will work for a more long-term solution
View 1 Replies View RelatedUsually where should we create the database link? In the production or development? create public database link dblinkname connect to user_in_db2 identified by password_in_db2 using 'tnsentry name in db2'; In production or development?
View 2 Replies View RelatedI am trying to create a database link from the 11g database to the 10g database using:
create database link ORCL10R2 connect to <username10g> identified by <password10g> using <db10g>;
It Returns
Database link created.
select sysdate from dual@ORCL10R2 returns error:
ERROR at line 1:
ORA-12504: TNS:listener was not given the SERVICE_NAME in CONNECT_DATA
what changes I need to make to tnsnames and listener at both servers.
Is it possible create dynamically database link within procedure.
It give me the following error
ORA-01031: insufficient privileges
But i can drop database link within procrdure.
Is there any way to do this?
I have a staging which connects to RAC clusters via dblink..I have a scenario to collect the hostname,systimestamp whenever i do a query from this rac clusters
So in general below would be cool
select UTL_INADDR.GET_HOST_NAME,sysdate,x,y,z from gv$symmetric would work perfect
But on dblink..
select UTL_INADDR.GET_HOST_NAME,sysdate,x,y,z from gv$symmetric@dblink.is returning local timestamp and hostname which is not intended
So i even tried subquery..
select (select host_name,systimestamp from v$instance),t UTL_INADDR.GET_HOST_NAME,sysdate,x,y,z from gv$symmetric@dblink
this would work in certain case ...But it certain cases it would throw an error saying mutiple rows from asubquery .All ineed is to get hostname,systimestamp append to all sql i fetch from any this rac clusters through this dblinks.
in a 9.2.0 db I create a db link but does not function :
CREATE DATABASE LINK "ONEDB"
CONNECT TO "user1" IDENTIFIED BY "****" USING 'ONEDB';
SQL> select * from dual@"ONEDB";
select * from dual@"ONEDB"
*
ERROR : ORA-12154: TNS:could not resolve service nameBut on the same server I can connect to 11g in sqlplus :
Z:>sqlplus /nolog
SQL*Plus: Release 11.2.0.3.0 Production on Mar. Juin 19 10:13:45 2012
Copyright (c) 1982, 2011, Oracle. All rights reserved.
SQL> connect user1@ONEDB
password :
Connected.Of cours the other DB links toward 9.2.0 databases work well.
the procedure to link oracle 9i database server withi 10i.
View 1 Replies View RelatedHere is the information about database I need to connect from my view, as the underlying table for my view is in this database
Database instance : orcl
Machine name : contentm (not sure, if this needs to be used)
so in my schema, I tried the following
CREATE DATABASE LINK product_lnk2 USING 'orcl'
select * from cont20.V_FB_PRODUCT_NM@product_lnk2
where cont20 is the schema on orcl
But it gives me this error ORA-12154: TNS:could not resolve the connect identifier specified