Template File Used In Database Creation?
May 15, 2012
I am having a template file (only .dbt file) to create the database instance.I Kept it in $ORACLE_HOME/assistant/dbca/template/,after running DBCA it was loaded with details mentioned in it ,but at the second last step when i try to see initialization parameters control file ,datafile and tablespace detail was not mentioned.when it started database creation ,got hanged on 5% completion showing failure in processing system parameters. Is it the right way to create database using DBCA?what should I do to create database using template?
View 1 Replies
ADVERTISEMENT
Nov 7, 2013
During the database installation the two nodes after all the prerequisite check and copy of files i am getting the below error message
"Template4 General_Purpose.dbc does not exist. Please specify an existing template for database creation".
How can i overcome this error ? I am installing Oracle 11g R2 11.2.0 On Oracle Enterprise Linux (5.1.19) running on [Oracle Virtual Box 4.1.12 ]. Also what are the steps to uninstall the previously installed db_home1 which failed due to this error.
View 1 Replies
View Related
May 8, 2012
how to create database instance using database template file(.dbt) while running DBCA?
View 1 Replies
View Related
Aug 18, 2010
I want to know what is the difference between the file catproc that we run after creation of the database in the Oracle 9i,10g and 11g r2. I have run that file in 11g R2 but it is taking more time and more over there are many new things that i saw in 11g R2 than what were there in 9i and 10g.
View 11 Replies
View Related
Apr 20, 2010
We have many customized forms built on 6i (11i Template) and deployed to EBS 11i, We want to Upgrade to R12, what shall i do with the customized form which already applied to 11i Template ?I know i have to migrate 6i to 10g then deploy, but my problem in the Template, shall i remove 11i Template and apply R12 Template from the beggining?
View 4 Replies
View Related
Nov 30, 2004
I am cloning a database from a cold backup in archivelog mode using the control file script but failes:
STARTUP NOMOUNT
CREATE CONTROLFILE DATABASE PROD NORESETLOGS ARCHIVELOG
:
:
:
ALTER DATABASE OPEN;
ALTER TABLESPACE TEMP ADD TEMPFILE 'C:\ORADATA\PROD\TEMP01.DBF'
[code]...
Tried again with RESETLOGS:
STARTUP NOMOUNT
CREATE CONTROLFILE DATABASE PROD RESETLOGS ARCHIVELOG
:
ALTER DATABASE OPEN RESETLOGS
*
ERROR at line 1:
ORA-00344: unable to re-create online log 'D:\ORADATA\PROD\REDO01B.ORA'
ORA-27040: skgfrcre: create error, unable to create file
OSD-04002: unable to open file
O/S-Error: (OS 5) Access is denied.
View 3 Replies
View Related
Sep 13, 2011
I have to apply monitoring template on my databases. Databases are already added and configured into OEM. They are visible under Databases tab and also under Groups where I have added them.
But when I try applying monitoring template and look for database in search window, it doesn't appear there.
View 1 Replies
View Related
Jan 28, 2013
I have installed oracle database 11gr2 in laptop1 and installed oracle database 11gr2 in laptop2.Both the laptop's are connected to same internet connection through wifi. So my question is can i create a database link between these two databases using this wifi? give some steps in creation of a database link.
View 13 Replies
View Related
Jan 17, 2003
Creating RAX 9.2.0 on SP2-AIX-4.3.3 64 bit hangs (2 node configuration) tablespacess are on VSD/raw partitions.
View 3 Replies
View Related
Dec 21, 2011
when i connected with oracle user i got error message like "
ERROR:
ORA-06550: line 1, column 7:
PLS-00201: identifier 'DBMS_APPLICATION_INFO.SET_MODULE' must be declared
ORA-06550: line 1, column 7:
PL/SQL: Statement ignored
"
View 1 Replies
View Related
Feb 25, 2012
i am working on a project that requires the creation of a object relational database. A number of different methods are required in order to insert different toy types into the appropriate toy related Object Table(s). Within this there will be the following fields:
Toy_name
Cost
Age_Range
rdy_allocation
and then some more specific information. The specific information for each toy is:
Toy_Type.
The toy_type can be electronic, game, or wooden.
For electronic I need to store Battery_Type and Number_of_Batteries.
For type Game, I need to store, Type, this could card_game, board_game or other_game.
For type wooden, I need to store Painted(Y/N).
The toys are requested by a child and created by elfs. This information also needs to be recorded but im more concerned with the creation of the toy class itself first. Now this was my first attempt at the solution but I cant seem to link the specific toy information into the same table. Will i have to create three separate tables then link them together?:
DROP TABLE TOY_OBJTAB;
DROP TYPE electronic_toy;
DROP TYPE wooden_toy;
DROP TYPE board_toy;
DROP TYPE toy_typ;
[code]....
View 9 Replies
View Related
Jul 9, 2012
During ASM Disk Groups creation after the ASM instance creation, receive the following error: Disk Group ORAASMGROUP2 already exists. Cannot be created again
The Grid infrastructure was deinstall one time and still the same issue.
View 4 Replies
View Related
Jun 13, 2012
I have a requirement to put together a Oracle SQL template to create re-usable DDL/DML Scripts for Oracle databases.Only the Oracle DBA will be running the scripts so permissions is not an issue.
The workflow for any DDL is as follows:-
1) New Table
a. Check if the table exists from the system/admin views.
b. If table exists then give message "Table Exists"
c. If table does not exist then execute DDL code
2) Add Column
a. Check if Column exists for a given table from system/admin views
b. If column exists in the specified table,
b1. backup table.
b2. alter table to make changes to the column
b3. verify data or execute dml script convert from backup to the new change.
c. If Column does not exist
c1. backup table
c2. alter table to add column
c3. execute dml to populate column with default value.
The DML scripts are for populating base tables with data required for business operations.
3) Add new row
a. check if row exists by comparing old values of each column with new values to be added for the new record.
b. If exists, give message row exists
c. If not exists, add new record.
4) Update existing record (We have createtime columns in these tables so changes can be tracked)
a. check if row exists using primary key.
b. If exists,
b1. deactivate the record using the "active" column of the table
b2. Add new record with the changes required.
c. If does not exist, add new record with the changes required.
View 17 Replies
View Related
Jan 21, 2011
manual DB creation.I gone through the below steps:
1) created appropriate folders.
2) Copied a PFILE from an existing DB and changed the contents like DB name etc...
3)Then I Created a text file called %ORACLE_HOME%DATABASEinitmuktha.ora with the following contents: ifile=c:pragpfileinitmuktha.ora
4) Then i set Oracle SID (Through Environment variable in MY COMPUTER --> PROPERTIES...)
5) Then I Created a Windows service for the DB.
6) startup nomount pfile= c:pragpfileinitmuktha.ora
7) Then I ran the database creation command.
The DB was created but when i log in again, it is looking for the pfile in the another DB's location rather than from "%ORACLE_HOME%DATABASE". Where i missed out to create new oracle_home folder?
View 6 Replies
View Related
Nov 5, 2012
Is it possible to create Dictionary Tablespace creation in 10g database?
View 5 Replies
View Related
May 29, 2013
I try to install RAC with 2 nodes OEL 5.8.
GI 11.2.0 is installed...The installation of the database crashed in dbca.
When I tried to rerun, I got: PRCD-1121: Speciffied server pool RAC for RAC is already hosting an administrator-managed configuration for database(s) RAC
View 3 Replies
View Related
Dec 7, 2010
I was able to create the standby database on different server with the same name for the primary and standby database but I want to know that can I create a standby database with different database name than that of the primary database server.
View 1 Replies
View Related
Apr 8, 2013
While Creating database on AIX Machine using DBCA utility I am getting following error
Error Details:
-------------------------------------------------------------------------------------------------------------------
Allocating device....
Specifying datafiles...
Specifing datafiles...
Restoring ...
[code]....
View 2 Replies
View Related
Sep 16, 2011
i am creating database manually in oracle 9i os version ibm-aix5.3 it showing following error
CREATE DATABASE "varathu"
*
ERROR at line 1:
ORA-01501: CREATE DATABASE failed
ORA-00200: controlfile could not be created
ORA-00202: controlfile: '/backup/varathu/control01.ctl'
ORA-27040: skgfrcre: create error, unable to create file
IBM AIX RISC System/6000 Error: 13: Permission denied
View 18 Replies
View Related
Feb 21, 2013
how to create database manually(without dbca).
View 2 Replies
View Related
Aug 15, 2010
I'm getting a "TNS disconnect" after database creation script creation in DBCA. Haven't figured out what's going on. I'm attempting to create a 2nd database on one linux 64 server. I get all the way through DBCA, but it won't go the final mile. Any thoughts? I've tried setting the port to a different port from the existing LISTENER, creating a LISTENER2 and associating it with the 2nd instance.
View 1 Replies
View Related
Nov 12, 2012
During a duplicate process to a new database name, rman crashed after the restore but before the switch datafile all.So now, we have under ASM the data files under the correct (new) diskgroup but v$datafile contains the previous names (and so diskgroup) and v$datafile_header is empty. RMAN is completly lost, our solution is to manually rename each file under SQL*Plus using ALTER DATABASE RENAME FILE. Unfortunately, we are using or migrating to OMF, so file names are meaningless and we are unable to associate ASM files with database files.
Any way (query or anything else) to associate the ASM files to the database files. Here's an abstract of what we have for one (small) tablespace:
ASMCMD [+ORAXQG1_L136_DG1/ORAXPG1/DATAFILE] > ls -l N47CAW*
Type Redund Striped Time Sys Name
DATAFILE UNPROT COARSE NOV. 12 10:00:00 Y N47CAW1.276.799152039
DATAFILE UNPROT COARSE NOV. 12 10:00:00 Y N47CAW1.318.799151641
SQL> select file#, name from v$datafile where ts#=17
2 /
[code]...
View 11 Replies
View Related
Jun 21, 2010
I would like to know how to get an insert template for any given table.
For example
SQL> @insertTemplate
Enter Table Name: emp
INSERT INTO emp VALUES
(NOT NULL -- EMP_ID NUMBER(15,0)
,NOT NULL -- EMP_NAME NUMBER(15,0)
,NOT NULL -- SALARY NUMBER(15,0)
,NULL -- HIRE_DATE DATE
) ;
For any given table the script should create an insert template like above?
View 13 Replies
View Related
Oct 19, 2010
Not sure if its an issue or just an Oracle "feature" of some sort. So I create a table with a specified partition/ sub partition template as follows:
CODEcreate table sr_part_test
(
part_key NUMBER,
subpart_key VARCHAR(10)
)
tablespace NORKOM_DATA
partition by range ( part_key )
subpartition by list ( subpart_key )
[code].......
Then when I split the MAX VALUE partition, all is hunky dorey and as expected:
CODEalter table sr_part_test split partition sr_part_max at (4) into
(
partition sr_part_4,
partition sr_part_max
);
select * from user_tab_subpartitions where table_name = 'SR_PART_TEST' and partition_name = 'SR_PART_4';
[code]......
But - what if I want to have new generated names and possibly even new subpartition keys? Won't work:
CODEalter table sr_part_test
set subpartition template
(
subpartition sp_1_NEWNAME values ('foo'),
subpartition sp_2_NEWNAME values ('bar'),
subpartition sp_3_NEWNAME values ('baz')
);
[code]........
Notice that the sub partition names are still using the old names (which I do NOT want), and still using the old keys! C .
View 3 Replies
View Related
Mar 17, 2011
i am using this syntax but its going in error, <?if:number(DAY_1)>=1 and number(DAY_1)<=25?><?attribute@incontext:background-color;'LightGreen'?><?end if?>
View 1 Replies
View Related
Oct 31, 2013
i have a xml sheet which contain 30 attributes,and only because of one attribute i got this error when i preview my xls sheet and the rest 29 attribute is working correctly.
Start Excel Previewonly open: falsemTemplate: C:Documents and Settingsesys36Local SettingsApplication DataOracleBIPublisherTemplateBuilderforExcel mp mp mp.xlsmTmpTemplate: C:Documents and Settingsesys36Local SettingsApplication DataOracleBIPublisherTemplateBuilderforExcel mp/tmp.xlsjava.lang.NumberFormatException: multiple points at sun.misc.FloatingDecimal.readJavaFormatString(Unknown Source) at java.lang.Double.valueOf(Unknown Source) at oracle.xdo.template.excel.render.BookDataWriter.copyCell(BookDataWriter.java:766) at
[code]....
View 1 Replies
View Related
Mar 14, 2012
How one should know whether RMAN is using target database control file or using separate catalog database. Also what one should do if he dont have catalog users credentials.
View 3 Replies
View Related
Oct 12, 2011
Are there some oracle views about subpartition template?
View 3 Replies
View Related
Jul 3, 2007
I am in the process of customising the Oracle Sourcing Notifications template/stylesheet - PON_SOURCING_XSLFO.xsl - to add a logo (done) and change the text (problems!?).
I would like to remove some of the dynamic text and replace it with some boiler plate by either hard coding it in the template or feeding modified data to the placeholders.
Where I can access the Sourcing Notifications text definitions or alternatively let me know how, if it is possible, to hard code text into the XML template.
View 1 Replies
View Related
Jan 17, 2011
I want to insert a formatted template into a table column. Is there any function for this requirement.
want is this format
Best Regards,
XYZ
View 1 Replies
View Related
