Forms :: Setup Form And Database Table For Time Entry Only (exclude Date)?
Feb 19, 2010
I have a form that the user has to enter a time of an event.
The time entered will most likely be in the past and NOT the current time.
What is the best way to set up a form and a database table for time entry only (exclude the date)?
I have tried datetime on the form with format HH12:MM PM and date on the database.
I have also tried the same with a timestamp on the database.
The time always appears to get entered correctly. However, the time is always stored as AM regardless of what is specified by the user.
View 2 Replies
ADVERTISEMENT
Feb 25, 2010
i am new to oracle form , i am using orcale 10g forms, i have following requirements.
1-I have a Data Block names Hes_Modules which is connected to a table HES_MODULES having following fields (modid,moddescr).
i want when form open it should show all enteries in table, My form conatin 5 fields and scrollbar.After form open it should allow to update and insert the reords in form
View 3 Replies
View Related
May 16, 2011
I have a form with three block when i finish entry in 3rd block i use go_block for going to 2nd one but as i fired it oracle ask me for save trasaction
Actually i want to save entry in all form at same time
View 3 Replies
View Related
Oct 10, 2011
we have a table attendance_d with no constraint which have duplicate emp_id we want to stop duplicate emp_id on the same date. if employee's record already entered in today's date then duplicate Error message must show if he tries again to enter the same record. for this i have written the following code but it is not working date wise some body. i want to use on WHEN VALIDATE ITEM TRIGGER in oracle forms 6i.
DECLARE
l_count NUMBER;
BEGIN
[Code]....
i have tried my best to format the syntax of code but in preview it showing like as above i have formated in toad by using the key ctrl+shift+f.
View 2 Replies
View Related
Sep 25, 2013
after spent a lot of time surfing the web looking for this error frm-40513 i did not found any answer about this, So I've removed the date items on my canvas and ran perfectly... after that i opened another copy of the form. In one item there was a initial value $$DBDATETIME$$ .. so that was the error.. i removed that value and i ran my form 11g (weblogic) again and the error has gone.
View 6 Replies
View Related
Apr 29, 2013
i have emp table of 5 columns empno,ename,dept,sal,edit_timing(edit timing datatype is timestamp).and my form contains empno,ename,dept,sal. is if i insert a record into forms it automatically insert the date and timing into edit_timing columns.
View 2 Replies
View Related
Oct 19, 2010
How can i separate the Date and time into two separate fields from the Oracle TIMESTAMP?
View 1 Replies
View Related
May 17, 2011
I have a column where I have time stamp with date and time(8-May-10 10:20:55 Am) from that i will get only time(10:20:55 Am)[query for this mentioned below] Now i need to append the time to current date and insert into a Timestamps column only .
so my result should be 17-May-11 10:20:55 Am(Assuming current Date is 17-May-11) . I tried search it by i found a way in sql server by using DataAdd and DataDiff .
query to get the time is:select to_char(to_date('11-MAY-11 05.00.00 PM', 'DD-Mon-YY HH:MI:SSAM'),'HH24:MI:SS') "Time Now" from dual
View 1 Replies
View Related
Feb 14, 2012
Is there any way to open 2 form or more and access them in the same time without close any form ?
View 2 Replies
View Related
Jan 15, 2010
i want to add icon in my form at run time and i m use PRE-FORM trigger
and i use this line for add icon
Win_Api_Session.Change_MDI_Icon(Win_Api_Utility.Get_Active_Window, '.IconsCompany.ico', Icon_Id); and these lines
MDI_ICO := WIN_API_UTILITY.GET_ACTIVE_WINDOW;
WIN_API_SESSION.CHANGE_MDI_ICON(MDI_ICO, '.IconsCompany.ico', 0);
i also attach the "d2kwutil.pll" library.but when i run form this error comes and my forms will be closed.
FRM-40734 : INTERNAL ERROR : PL/SQL ERROR OCCURRED
and my whole Code of PRE-FORM is this...
DECLARE
MDI_ICO PLS_INTEGER;
ONAME VARCHAR2(200);
Icon_Id PLS_INTEGER:=0;
BEGIN
[code]....
View 2 Replies
View Related
Apr 24, 2013
1) how to pass date from .net using odp.net to oracle database for storage. so that it should not be affected if any one changes os(windows xp or 2003 /2008 server) date formate.
database and application both are on different server and can be on same server also. so if any one keeps different date formate on both OS then it should not get affected.
View 1 Replies
View Related
Jun 20, 2013
How to find date and time of a column in table ?
say for example there is a column called 'date_txn' in a table .When i select that particular column it display output as 'June 2013'.But i want output "with date and time".
View 10 Replies
View Related
Jul 24, 2013
how to get data from a Table in Date and Time format? Curently I'm using To_TIMESTAMP for a date range.
Here is the code Snippet -
Select *
FROM TABLE_Name
WHERE COUNTRY= 'IN'
AND CALC_DATETIME between TO_TIMESTAMP('2013/06/05', 'YYYY/MM/DD HH:MI:SS') AND TO_DATE ('2013/07/08', 'YYYY/MM/DD HH:MI:SS')
View 39 Replies
View Related
Dec 30, 2011
I have a problem I am making a rooster I want to increment dates. User will put input the first date then it have to incremented by user click i used Key_Next_item on Date Field.
if System.cursor_record >1 then
Doctor_Rooster_Details.Week_Date =:Doctor_Rooster_Details.Week_Date +1
Its gives me error on KeyNext_ITem of ORA
I have fields
Week_Date Day St_Time EndTime Available
01/02/2011 Friday 10:00 12:15 Y
I want to increment Week_date when user click on next record it will incremented. ST_Time, End_Time and available user will input that.
01/02/2011 Friday 10:00 12:15 Y
02/02/2011 Sat
View 4 Replies
View Related
Mar 7, 2011
I have a Situation for Date and Time Validation.
I have 4 fields, d1,d2,t1,t2 all are date datatype
I have 1 field for R1 for resource a varchar datatype
1. d1 and d2 for date
2. t1 and t2 for time.
The User enter d1 and d2, t1 and t2
eg 01-03-2011 - > d1
01-03-2011 - > d2
9:00 - > t1
9:30 - > t2
and 'Room1' - R1 for resource.
any other entry having the same data, or have partial data should not be allowed.
like on 01-03-2011 between 9:29 to : 9:40 or even 8:30 to 9:01 on the same date or (replicated dates boundaries) should not be allowed.
View 2 Replies
View Related
Feb 16, 2010
I have a display item form field. The field's data type is date. It is also a database field that corresponds to a date field in the table.
I have set the format mask on the form field to
MM/DD/YYYY HH24:MI:SS
I can populate that field with sysdate in when-new-form-instance.
However, if I try to get the date and the time in the field, it just populates the date with the time of 00:00:00.
(02/16/2010 00:00:00 for example).
I have tried several to_char and to_date variations but can't seem to get the current time into that field.
View 5 Replies
View Related
Mar 5, 2010
How connect-time failover is setup.
I am following lab instruction from my Oracle Admin Workshop book. The exercise is to create a 2nd listener to support connect-time failover. I have two listeners up and running. I connected the second listener using Static Database Registration in OEM, and then I started it.
When I looked in the listener.ora file, I was expecting to find the entries for FAILOVER=TRUE but it is not there. Both listeners are designed to connect to the same instance 'orcl'.
My questions:
1) Is the FAILOVER entry supposed to be done automatically when the second listener is created ? or is it always a manual entry ?
2) How can I test that it is working ?
View 7 Replies
View Related
Mar 1, 2010
I need get access a property (time of last modification) file winword.
View 3 Replies
View Related
Dec 5, 2011
I have made one application form where users need to enter some data. This data is getting inserted in four tables. As in for now the data is properly getting saved and retrieved only for one user at a time. But problem arrives when more than one users are simultaneously making an entry and saving the data at one time.Same number is getting generated for the users who are saving the data at one time which should not happen.
View 4 Replies
View Related
May 8, 2012
I want to capture date and time in separate fields from user and save it in single column in table
example: user enters date and time
Date : 08/05/20212
Time : 18:50:00
At the time of save I want to save [08/05/2012 18:50:00].
View 1 Replies
View Related
Oct 21, 2011
I have a requirement while A4 printing..When printing each time user have to select file -> page setup -> size(A4)..THEN printing format become A4 Size. How to achieve this one without user have to go on setting.
View 1 Replies
View Related
May 31, 2010
what i miss to load date and time from text file to oracle table through sqlloader
this is my data in this path (c:externalmy_data.txt)
7369,SMITH,17-NOV-81,09:14:04,CLERK,20
7499,ALLEN,01-MAY-81,17:06:08,SALESMAN,30
7521,WARD,09-JUN-81,17:06:30,SALESMAN,30
7566,JONES,02-APR-81,09:24:10,MANAGER,20
7654,MARTIN,28-SEP-81,17:24:10,SALESMAN,30
my table in database emp2
create table emp2 (empno number,
ename varchar2(20),
hiredate date,
etime date,
ejob varchar2(20),
deptno number);
the control file code in this path (c:externalctrl.ctl)
load data
infile 'C:externalmy_data.txt'
into table emp2
fields terminated by ','
(empno, ename, hiredate, etime, ejob, deptno)
this is the error :
C:>sqlldr scott/tiger control=C:externalctrl.ctl
SQL*Loader: Release 10.2.0.1.0 - Production on Mon May 31 09:45:10 2010
Copyright (c) 1982, 2005, Oracle. All rights reserved.
Commit point reached - logical record count 5
C:>
View 21 Replies
View Related
Jul 12, 2011
I have an insert statement like below.
insert into emp (select empno,ename,sal);
Here I need to exclude the rows having sal<0 from the SELECT query and insert those into some other table simultaneously.
View 4 Replies
View Related
Feb 6, 2012
I tried to export a schema excluding some table, but expdp exit with this error:
ORA-39001: invalid argument value
ORA-39071: Value for EXCLUDE is badly formed.
ORA-00936: missing expression
The command that I use is:
expdp system/password@ORADB directory=EXPORT_ORA_DIR schemas=maxdb logfile=maxdb.log
dumpfile=maxdb.dump EXCLUDE=TABLE:"IN ('max_table_1','max_table_2')";
Where I made a mistake?
View 2 Replies
View Related
Dec 3, 2012
Version : 4.1.1, I have a tabular form on a DB table. One of the columns is a date field. When the user hits the "add Row" button on the tabular form, I want the Date field to be defaulted to sysdate. Here is what I have tried so far,
1. Created a "hidden" item P1_SYSDATE and populated the default value with sysdate. After this, under the DB tabular report date field, I used default type - Item/application on this page and entered P1_sYSDATE
2. Instead of populating the default value of the P1_SYSDATE hidden item, I created a before regions process and added
:P1_SYSDATE := sysdate
and added P1_SYSDATE to default type of the tabular date field with default type as "ITem/application on this page.
I get the error
ORA-01790: expression must have same datatype as corresponding expression
I tried to_Char(sysdate,'dd-mon-yyyy') and then converting it back to to_date. still no luck.
View 1 Replies
View Related
Jun 4, 2012
When I try to extract the date tag value from XML data, the time stored in 20120602153021 format i.e., YYYYMMDD24HHMISS format. The following statement extracts only date as 02-JUN-12 however do not extract the time part.
If I try the same in SQLplus with to_date it works however fails in PL/SQL.
XML data:
<?xml version="1.0"?>
<RECORD>
<REGTIMESTAMP>20120601130010</REGTIMESTAMP>
</RECORD>
PL/SQL Extract:
CURSOR c_xml_record
IS
SELECT extract(value(d), '//ACTIVATIONTS/text()').getStringVal() AS REGTIMESTAMP,
FROM t_xml_data x,
[code].......
View 3 Replies
View Related
Nov 19, 2011
I have an issue of not able to connect to the database after switchover without making changes in TNS entry after the switchover when I try to connect to then the primary database (which is standby before ) , the tns entry has entries for both the primary and secondary but the order of the primay and seconday database is to be changed manually till then it keep showing ERROR: ORA-01033: ORACLE initialization or shutdown in progress.
View 5 Replies
View Related
Aug 3, 2012
I am trying to calculate the compressed size of backup of my database by excluding table space ( and all the tables in that table space).
I know how to calculate the size of particular user DB size.
select sum(bytes/1024/1024)"size" from dba_segments where owner='ABC';
View 7 Replies
View Related
Jun 6, 2012
I am not able to load complete date along with time in the date column. here is my table desc
DESC STAGE
Name Null Type
----------------------------------
TABLE_NAME NOT NULL VARHCAR(20)
RECORDCOUNT NUMBER
CREATED_DATE NOT NULL DATE
my control file is like this
LOAD DATA
APPEND
INTO TABLE SCOOP.STAGE
FIELDS TERMINATED BY ","
( TABLE_NAME
,RECORDCOUNT
,CREATED_DATE DATE(16) "YYYYMMDDHH:Mi:SS"
)
the data gets loaded, but it appears like this in the table
HIGHSCHOOL3080606-JUN-12
MIDDLESCHOOL8768006-JUN-12
BUT I WANT COMPLETE DATE AND TIME (HH:MI:SS) , HOW CAN I GET IT (THIS IS HOW I WANT 06-JUN-12 11:07:33)
View 10 Replies
View Related
Dec 23, 2012
I want to reset my date to this format: 12/31/2012 11:59:59 PM - see code below:
DECLARE
v_latest_close DATE;
BEGIN
v_latest_close := TO_DATE ('12/31/2012 23:59:59 ','MM/DD/YYYY HH24:MI:SS');
DBMS_OUTPUT.PUT_LINE('The new date format is : '|| v_latest_close);
END;
the code above displays only : 12/31/2012 instead of 12/31/2012 11:59:59 PM
View 4 Replies
View Related
