I have a requirement while A4 printing..When printing each time user have to select file -> page setup -> size(A4)..THEN printing format become A4 Size. How to achieve this one without user have to go on setting.
View 1 RepliesI am trying to create a report, but for the second page its trying to print the text from the middle of the page, i.e its cutting half line, suppose if the line has description 'HELLO WORLD 123456' I see only 123456, the whole report is cutting the first 15 characters for the second page?
View 1 Replies View Relatedfollowing is my code written in formula column
function CF_1FORMULA0006 return Char is
v_user_id number;
u_name varchar2(100);
begin
fnd_profile.get('user_id',v_user_id);
select user_name into u_name from fnd_user
where user_id =v_user_id;
return u_name;
end;
getting no data found error.
I have an .xls file which needs to be the last page of an rdf report. I would prefer to not type up the contents of the file and lay them out. Is there some way I can link this to the footer section or any other alternative?
View 2 Replies View RelatedI am facing problem while printing from the Oracle Report.. Web.show_document does not print the output of RDF file directly on the printer.
View 1 Replies View Relatedhow to handle Duplex Printing in XML? I have a Oracle XML report (rft and xsl) that needs to be duplex.
View 1 Replies View Relatedhow to display data in tabular format but the printing direction is down/cross? I managed to change set printing direction but the column header is not showing on the cross section.
I expect:
Header1 Header 2 Header1 Header2
John India Max Singapore
But it displays without header name on the next part.
Header1 Header 2
John India Max Singapore
And also is that possible for matrix query to be printed in down/cross direction like above?
All the reports are skipping one extra page after printing of last page irrespective of number of pages in the report. if same report file is generated and given to printer using dos or linex dosen't skips extra page at end. It happens only if i print the report through ORARRP. The report file extension is '.rrpt'.
View 2 Replies View RelatedBy setting the parameters in set_report_object_property parameters we can disable the printing option in 11g. Do we have some kind of option , to do the same in 10g.
View 1 Replies View RelatedI just want to ask that can we code number of pages to be printed before printing the report?
Like if we use report builder software of oracle to print a report, this will ask that how many pages you want to print and no of copies you want to make for this report as normally asked with other software before printing.
Actually, I am stuck with a complex query report where every single page has different query to execute. The problem with my report is that when ever user prints the report, the last page comes empty with the page header, no data in it.
What I want is to code, if possible, to print the report avoiding the last page to print. So that every time I can able to control printing pages. For example if report has 10 pages and definitely has data on 9 pages then it can only print up to 9 pages rather than going to print 10 pages.
Can viewing and direct printing the report become same? I always find some differences not in the data but the layout of the report. the layout of report that is viewed on the monitor through internet explorer is slightly displaced and small fonts compared with the report printed directly to the printer without viewing it on the screen.
View 2 Replies View RelatedI am using oracle developer suit(form 10g), Using OLE2 object to initialize excel, On "BEFORE REPORT TRIGGER" i am printing report heading in excel using OLE2 objects only. if i run report from developer suit report builder it give output in excel normally and what expected but when ever i put same report on server and run report from application it gives error :
" Terminated with error : <br> REP-1401 'before report': FATAL pl/sql error occured. ORA-43356; message 43356 not found; Product=RDBMS; facility = ORA."
I have a Invoice Report, i will give the parameters.
From_Inv_No:
To_Inv_No:
From_Inv_Date:
To_Inv_Date:
so i will give 10 invoices with dates in the above parameters to generate the report, actually the report prints in a pre-printed sheet, well it prints the first page correctly but the second page and continuous pages not printing in the exact pre-printed area. example see below;
(Page2)
506176
28/11/2011
(Preprinted text)INVOICE NO :
INVOICE DATE:
how to give spaces between pages actually every pages it should print 3 to 4 inches gap between the first page but it prints just one inch above the preprinted area. how to make it print without gaps. Additional Information: Preprinted sheet Height 17 inches.
Paper Layout Width 8.5
Height 12
Character Mode
Report Width 80
Report Height 72
for header section, main and trailer sections above readings only given.
I want to print two record of emp table in same line number in tabular format report.
For example if i have emp table and I want to print empno,ename,sal columm only,In tabular format report, Two record should print per line. so If emp table have 14 record report should be printed on 7 rows.
so the output in print preview should be like this
EMPNO ENAME SAL EMPNO ENAME SAL
------ ---------- ----------------------------------------------
7369 SMITH 800 7499 ALLEN 1600
7521 WARD 1250 7566 JONES 2975
7654 MARTIN 1250 7698 BLAKE 2850
.
.
.
.
1) I am able to view the oracle report in PDF format in my Web Application, but when I tried to print this PDF on Line matrix printer, the characters are not printing rightly.
2) Can I take report output as a text file and and print it through DOS mode printing.
when I am trying to send report for prints then I received this error.
"
REP-57054: In-Process Job terminated: The report generated successfully but distribution to destination failed.
REP-50159:The report generated Successfully but distribution to destination failed.
REP-50151: Destination ID Currency failed with error An error occured while sending the file to the printer :HPofficejetpro7700Series- Cannot run program "COrcaleMiddlewareasinst_5Config
eportsin
wlpr":
create process error=2, The system cannot fine the file specified."
I have a report created in Reports6i. I have two fields at the bottom
1.Page Total
2.Voucher Total
I do not want to print the Page Total if the total number of pages = 1.
How can I achieve this?
I want to show two Lines of footer Text only in the Last Page of the Report. If there in only one Page , then it should come in the First page.
View 13 Replies View Related1.)REP-1212: Object 'B_PAGENUM1' is not fully enclosed by its enclosing object 'Margin'.
View 4 Replies View RelatedMy table contains following result:
DeptId Empid
001 1
001 2
001 3
002 1
002 2
So I want to print page number like from first page 1/3 then 2nd page 2/3 , on 3rd page 3/3 Once grouping change for Dept 002 then page count should reset like 1/2 then 2/2
I am trying to set the intial value of "Select List" to APP_USER the only first time when the page loads and use it to filter the report, any other time once the page is loaded the user should select another value from the Select List then click the submit button to display the details in the report, i tried to achieve this by setting "select List" creating LOV for Select List then set default=APP_USER but now the problem any time you click the submit button it reset the "Select List" from selected value back to default so how can you achieve this to set the value of Select List only the first time the page loads?
View 1 Replies View RelatedDuring the Report Development for the Invoice Print the Page Number is required to display for the each Page like 1 of 3.The Report have the parameter of From Invoice Number and To Invoice Number. The Page display the Current page and Total Page. How to Split the Invoice Number wise page Number in the Report.
Presently
Invoice No Page No.
14001 1 of 4
14002 2 of 4
14002 3 of 4
14003 4 of 4
Requirement
Invoice No Page No.
14001 1 of 1
14002 1 of 2
14002 2 of 2
14003 1 of 1
I have a report with 4 groups one above the other and there is data such that each group has certain number of records for a particular value. Now what I want is, to have a page break after each set of data for all the groups. Can this be achieved using format triggers ?
View 3 Replies View RelatedI want to display a boilerplate item and their value only on the last page.
The item is under frame . So print object at last page doesn't work.
I could find the page number by the use of srw.get_page_num(n).
But not sure how to find the last page number.
how can i break my rtf page after every 8 record.
View 2 Replies View RelatedI have a dot matrix printer (Epson LQ-2180, which is a tractor feed printer). While printing a report which contains cheque information. Now while displaying the report it display in correct size but while I print the report by default it takes printer page size and print in that paper size. I want to print the report in cheque size with continuous sheet with more than 900 cheque which defined in report property.
I want that the printer should print exact page length and width what i defined in report.
I have developed a report it remains to the first page only. It contains thousand of record.
What should be select for a repeating frame in "OBJECT PRINT ON"
What should be select for a static frame in "OBJECT PRINT ON"
clarify the following question:
1. What is the maximum page size (width X height) of the report?
2. How many characters (maximum) in one line (horizontal) supported by report 10g?
3.How many row per page (vertical) supported by report 10g?
I have a report lay out as follows.If there are 3 engine nos then 3 Engine nos are printed in first 3 consecutive pages and an attachment which prints in next i.e 4th,5th and 6th page.I want the report to be printed like 1 Engine No and its respective attachment in the second page. 2nd Engine No and its respective attachment in 4th page.
View 1 Replies View Related6i reports
windows XP
I created a summary column reset at page wise placed on page and print object on all page but it showing only last page .