I am trying to create a report, but for the second page its trying to print the text from the middle of the page, i.e its cutting half line, suppose if the line has description 'HELLO WORLD 123456' I see only 123456, the whole report is cutting the first 15 characters for the second page?
View 1 Replies
1) I am able to view the oracle report in PDF format in my Web Application, but when I tried to print this PDF on Line matrix printer, the characters are not printing rightly.
2) Can I take report output as a text file and and print it through DOS mode printing.
I want to print two record of emp table in same line number in tabular format report.
For example if i have emp table and I want to print empno,ename,sal columm only,In tabular format report, Two record should print per line. so If emp table have 14 record report should be printed on 7 rows.
so the output in print preview should be like this
EMPNO ENAME SAL EMPNO ENAME SAL
------ ---------- ----------------------------------------------
7369 SMITH 800 7499 ALLEN 1600
7521 WARD 1250 7566 JONES 2975
7654 MARTIN 1250 7698 BLAKE 2850
.
.
.
.
I am facing problem while printing from the Oracle Report.. Web.show_document does not print the output of RDF file directly on the printer.
View 1 Replies View RelatedI have a requirement while A4 printing..When printing each time user have to select file -> page setup -> size(A4)..THEN printing format become A4 Size. How to achieve this one without user have to go on setting.
View 1 Replies View RelatedCan viewing and direct printing the report become same? I always find some differences not in the data but the layout of the report. the layout of report that is viewed on the monitor through internet explorer is slightly displaced and small fonts compared with the report printed directly to the printer without viewing it on the screen.
View 2 Replies View Relatedwhen I am trying to send report for prints then I received this error.
"
REP-57054: In-Process Job terminated: The report generated successfully but distribution to destination failed.
REP-50159:The report generated Successfully but distribution to destination failed.
REP-50151: Destination ID Currency failed with error An error occured while sending the file to the printer :HPofficejetpro7700Series- Cannot run program "COrcaleMiddlewareasinst_5Config
eportsin
wlpr":
create process error=2, The system cannot fine the file specified."
I prepared a report in Oracle reports and trying to run the report through command line by creating a batch file. but i am getting the following error message when i run the batch file
REP-0069: Internal error
REP-57054: In-process job terminated:Executed successfully but there were some errors when distribute the output
REP-50159: Executed successfully but there were some errors when distribute the output
the batch file is as follows
D:DevSuiteHome_1BINRWRUN p:spannawazeitspanna_wa_zeit.Rep userid=alrayatec/alrayatecprod@alraya.world
DESFORMAT=HTMLCSS DESTYPE='mail' DESNAME='sarfraz_it@hnd.com'
I have developed a report it remains to the first page only. It contains thousand of record.
What should be select for a repeating frame in "OBJECT PRINT ON"
What should be select for a static frame in "OBJECT PRINT ON"
clarify the following question:
1. What is the maximum page size (width X height) of the report?
2. How many characters (maximum) in one line (horizontal) supported by report 10g?
3.How many row per page (vertical) supported by report 10g?
I have a report lay out as follows.If there are 3 engine nos then 3 Engine nos are printed in first 3 consecutive pages and an attachment which prints in next i.e 4th,5th and 6th page.I want the report to be printed like 1 Engine No and its respective attachment in the second page. 2nd Engine No and its respective attachment in 4th page.
View 1 Replies View RelatedI have an .xls file which needs to be the last page of an rdf report. I would prefer to not type up the contents of the file and lay them out. Is there some way I can link this to the footer section or any other alternative?
View 2 Replies View RelatedI want to show 1 record per page in matrix report. I set Main section orientation as landscape and width is 14. but it show multiple records on single page.
View 2 Replies View RelatedI have a Report With Group G_Emp, having Columns Eno, Ename etc. in a Repeating frame R_1 and I have put A frame below this repeating frame R_1 with a Text Item Just for Displaying Comments, so just i want to display this Text Item in the second page and the Employee details in the first page, the restriction is that the Text item should not print in the first page.
View 2 Replies View RelatedHow to get page wise total on every page and grand total on last page in oracle tabular report. I have tried by placing summary column at report level and its reset property to page wise and print job on all page but last but it did not work .
View 2 Replies View RelatedHow to make report high 3.33 inch per page. so if there are more than one page in the report it will start printing in the correct position on the next page,
i make generate to PDF then print.
I am Created one Invoice Report with Text Output which as Require to Print in Pre-Print Stationary Page,In it the Total Value is Require to Print Down which as Anchored and It printing fine,But when ever the Invoice Contain lot of Items then the Total Value is Print in Multiple Page, as per user requirement as to Print in Single Page only.
View 5 Replies View Relatedhow to handle Duplex Printing in XML? I have a Oracle XML report (rft and xsl) that needs to be duplex.
View 1 Replies View Relatedhow to display data in tabular format but the printing direction is down/cross? I managed to change set printing direction but the column header is not showing on the cross section.
I expect:
Header1 Header 2 Header1 Header2
John India Max Singapore
But it displays without header name on the next part.
Header1 Header 2
John India Max Singapore
And also is that possible for matrix query to be printed in down/cross direction like above?
following is my code written in formula column
function CF_1FORMULA0006 return Char is
v_user_id number;
u_name varchar2(100);
begin
fnd_profile.get('user_id',v_user_id);
select user_name into u_name from fnd_user
where user_id =v_user_id;
return u_name;
end;
getting no data found error.
All the reports are skipping one extra page after printing of last page irrespective of number of pages in the report. if same report file is generated and given to printer using dos or linex dosen't skips extra page at end. It happens only if i print the report through ORARRP. The report file extension is '.rrpt'.
View 2 Replies View RelatedBy setting the parameters in set_report_object_property parameters we can disable the printing option in 11g. Do we have some kind of option , to do the same in 10g.
View 1 Replies View RelatedI just want to ask that can we code number of pages to be printed before printing the report?
Like if we use report builder software of oracle to print a report, this will ask that how many pages you want to print and no of copies you want to make for this report as normally asked with other software before printing.
Actually, I am stuck with a complex query report where every single page has different query to execute. The problem with my report is that when ever user prints the report, the last page comes empty with the page header, no data in it.
What I want is to code, if possible, to print the report avoiding the last page to print. So that every time I can able to control printing pages. For example if report has 10 pages and definitely has data on 9 pages then it can only print up to 9 pages rather than going to print 10 pages.
I am using oracle developer suit(form 10g), Using OLE2 object to initialize excel, On "BEFORE REPORT TRIGGER" i am printing report heading in excel using OLE2 objects only. if i run report from developer suit report builder it give output in excel normally and what expected but when ever i put same report on server and run report from application it gives error :
" Terminated with error : <br> REP-1401 'before report': FATAL pl/sql error occured. ORA-43356; message 43356 not found; Product=RDBMS; facility = ORA."
I have a Invoice Report, i will give the parameters.
From_Inv_No:
To_Inv_No:
From_Inv_Date:
To_Inv_Date:
so i will give 10 invoices with dates in the above parameters to generate the report, actually the report prints in a pre-printed sheet, well it prints the first page correctly but the second page and continuous pages not printing in the exact pre-printed area. example see below;
(Page2)
506176
28/11/2011
(Preprinted text)INVOICE NO :
INVOICE DATE:
how to give spaces between pages actually every pages it should print 3 to 4 inches gap between the first page but it prints just one inch above the preprinted area. how to make it print without gaps. Additional Information: Preprinted sheet Height 17 inches.
Paper Layout Width 8.5
Height 12
Character Mode
Report Width 80
Report Height 72
for header section, main and trailer sections above readings only given.
I am getting an empty line after every 988 records in the output. There are no pagebreaks defined in the layout.
This is a "|" delimited report.
I have developed one report but need one formatting suggestion. There is one field called "DESCRIPTION", I want the value of this field to be displayed in a single line. Now the big values are wrapped into multiple line.
Now,
DISPLAY
----------------
This is a Oracle
Report.
I want,
DISPLAY
------------------------
This is a Oracle Report.
Maximum size of "DISPLAY" field is VARCHAR2(240).
I have a report created in Reports6i. I have two fields at the bottom
1.Page Total
2.Voucher Total
I do not want to print the Page Total if the total number of pages = 1.
How can I achieve this?
How can i print a report name with full path at left bottom on report.
View 3 Replies View RelatedI am trying to open report in parameter form in drill down report.
View 7 Replies View Related
