I have created a simple form & report based on 2 tables Cust & cntry.I just want to display all customers of region selected in the criteria form. I am uploading the files.
Other than selection criteria report is fine.
How can i pass the parameter from reports to form. means how can i open particular form from my report. means if i write query
select * from emp
this emp table report open now i just want open only emp no 10 form from this report so which parameter i have to pass.
have a customer table with following columns.
1 - Cust_ID
2 - Cust_nam
3 - Cntry_id
I have another table country.
1 - Cntry_id
2 - Cntry_nam
3 - Region
Now I want to view report for all customers of a certain region selected by user in criteria form.How can I do this?
If I want to pass lots of informations (100 parameter) from standard HR assignment form to my custom form. I am using fnd_function.execute('called form') to launch new form.
I thinking of creating 100 parameter object but not sure it has limitation of number or not. Another ways I googled are shared PL/SQL library or parameter list which I still doubt.
I can not Pass parameter from forms to Report.
I use three parameter for report. I want to show the employee who has been hired between from_date to_date,it work well in report builder. but I want to pass parameter from forms to report and pdf format. I upload my work (this is actually a zip File, change file type txt to zip just before open).
In my application (forms6i) initially data will be displayed in a non-database block after a lot of calculations and validations which is time consuming.
Now, if the user want to print it as a report, we store the displayed data in a dummy table and run the report using that dummy table and then delete records from it.
Is it possible to pass the records displayed to the report as a parameter so that I can avoid Unnecessary add/delete records?
I am trying to open report in parameter form in drill down report.
View 7 Replies View RelatedI had report A which drill down to report B. While drilling down to report B, The parameter form of report B should be displayed which accept parameter code and then open the report B. My parameter form is displayed but not accepting the input. i am using the hyperlink to display the second report. Is there any cgimap.bat file to be configured for the parameter report? If yes then how to configure this file?
View 1 Replies View Relatedis there any type of veriable used in declate statement whith could be used in 2 different form to pass values from one form to another.
View 1 Replies View Relatedi had a chart developed by graphics builder in which I am passing one parameter(ie year) and displaying the chart.Now i want to pass two parameter into chart.How to do this here i have attached my chart view and procedure which executes and display the chart from forms.
coding when button pressed
PROCEDURE CHART_DISPLAY IS
pl_id ParamList;
pl_name VARCHAR2(100) := 'tempdata';
[Code]....
In the above procedure i had one parameter directly am passing value of year '2009' now i want to pass two parameter like between 'year1' and 'year2' for getting chart between two years.
I want to send data back to calling form
1. is it possible? if so how?
2. How much length/byte data we can send?
if i have two reports one of them is that you enter the office name and it will show you list of employee. the second one i want to show the information that is related to that employee by putting beside each employee button that if pressed i will go to other report that show me information about that employee.How i could link the two form and pass the employee name to the next form
View 4 Replies View Relatedcan we pass parameter in a link. i.e when we open a new form clicking on the link, some values to be passed to the form so that new form get populated with that value.
View 2 Replies View RelatedGetting error FRM-47023: No such parameter named CHART_OF_ACCOUNTS_ID exists in our custom form XYZ
View 5 Replies View RelatedWhen I click on excel report button on the parameter form, the excel runs behind the form instead of in running in fron of it thereby making it partially invinsible. I am having to minimise the form to have a clear view. This is not the case with Forms 10g. Is there an extra code on the OLE2 to send the form to the background so that the excel output can take over the screen.
View 6 Replies View RelatedI am getting a problem I use lexical Parameter but When I call that through Form my parameter forms didn't call that on report parameter. My query is below as well I have attached all Jpg files to understand. I Didn't getting where I am mistaken.
DECLARE
pl_id PARAMLIST;
BEGIN
pl_id := GET_PARAMETER_LIST('TMP');
IF NOT Id_Null(pl_id)
THEN
DESTROY_PARAMETER_LIST(pl_id);
[code]........
How to pass parameter in a view.
create or replace view spic_bags as
select distinct(a.item_code) Material_Code,a.uom,
(case when a.card_code = '60' then
case when a.ccn <> '091' then
[code]........
in this above view i have hardcoded dates, well how to pass parameter for this view without hardcoding? here i need to pass the date as a parameter from a select query to view the data from the above view!
In a procedure i need to pass date parameter, to check how to do this. I create a simple procedure, but it giving
PLS-00049: Bad Bind Variable 'FD'
PLS-00049: Bad Bind Variable 'TD'
How to resolve .......
CREATE PROCEDURE pass_date_parameter
AS
fd VARCHAR2 (10) DEFAULT '01-01-2010';
td VARCHAR2 (10) DEFAULT '01-06-2010';
ffd VARCHAR2 (10) DEFAULT '01-01-2010';
ttd VARCHAR2 (10) DEFAULT '01-06-2010';
[Code]....
From my form with a single button i need to display a report with a paramter. Report is displaying fine but the parameter is not getting passed. I did the following behined my button i add this
DECLARE
repid REPORT_OBJECT;
v_rep VARCHAR2(100);
rep_status VARCHAR2(20);
plid ParamList;
vParamValue number := 20;
[code]...
If i remove the where condition the whole table data start appearing in the report but adding where condition is not accepting 20 as i send from the FORM Button. And the report with blank data appeared with column headings.
I am trying to pass a PL/SQL table as a parameter to a procedure and then using that table, update the records, but I am getting an error like:
ORA-06550: line 30, column 10:
PLS-00306: wrong number or types of arguments in call to 'UPDATE_STATUS'
Find the code below:
CREATE TABLE test_pl(empno VARCHAR2(20), empname VARCHAR2(40), empsts VARCHAR2(10));
INSERT INTO test_pl
VALUES ('0001', 'A', 'Y');
INSERT INTO test_pl
VALUES ('0002', 'B', 'N');
INSERT INTO test_pl
VALUES ('0003', 'C', 'Y');
INSERT INTO test_pl
VALUES ('0004', 'D', 'Y');
[code]....
I want to pass a table as a parameter to a procedure.
As an example:
TYPE my_tab IS TABLE OF my_rec INDEX BY BINARY_INTEGER;
However, I want to give this parameter a default of null... is this possible?
procedure myproc(p_param1 in varchar2, p_tab in my_tab default null)
I have written as function :
create FUNCTION Cov(p_str1_x IN VARCHAR2,p_str2_x IN VARCHAR2, p_str1_y IN VARCHAR2,p_str2_y IN VARCHAR2) RETURN NUMBER is
TYPE ty_varchar_assoc IS TABLE OF VARCHAR2(100) INDEX BY VARCHAR2(100);
v_x ty_varchar_assoc;
v_y ty_varchar_assoc;
v_inter ty_varchar_assoc;
[Code]....
Now i need to pass the values to the parameter from a table? How can i do that?
how to use of Database link (DBLINK) in D2K form and report PL/SQL.When I Use the DB Link in Pl/SQL of any form6i or report 6i, On compilation forms and reports are automatically closed.
View 3 Replies View Relatedi have one report with one parameter name is :description the data of the description is
ALL 1" MD
UBS 2" MD
MNC 23 MSD
LKT 11" WIP
LLP 2 MC
and my question is when i call a report from form it shows the syntax error or command line.if i give the value MNC 23 MSD (or) LLP 2 MC in forms it run good.But if i give UBS 2" MD (or) ALL 1"MD (or) LKT 11" WIP in forms it through REP-159 Syntax error or command line.
Create a PL/SQL block that declares a cursor called DATE_CUR. Pass a parameter of DATE data type to the cursor and print the details of all the employees who have joined after that date.
DEFINE P_HIREDATE = 08-MAR-00
Test the PL/SQL block for the following hire dates: 08-MAR-00, 25-JUN-97, 28-SEP-98, 07-FEB-99.
I don't know how to pass parameters. So far I have this:
SET serveroutput ON;
DECLARE
p_HIREDATE DATE := 08-MAR-00;
CURSOR c_DATE_CUR(P_HIREDATE DATE) IS
BEGIN
OPEN c_DATE_CUR();
I am trying to pass many characters to the in mode parameter using procedure , but i am getting the below error.
ORA-06550:
PLS-00172: string literal too long
CREATE TABLE USR_DETAILS
(
LOAD_ID NUMBER NOT NULL,
LOAD_DATE DATE,
USER_VALUE VARCHAR2(4000 BYTE),
USERID VARCHAR2(4000 BYTE)
)
insert into user_details values('1','2/10/2011','PROD1','USER1');
insert into user_details values('2','2/10/2011','PROD2','USER2');
[code]......
I have written the code as below...
Procedure concept :
Here i will seperate the strings(input parameters) using comma(,) symbol . Here users may pass more than 5000 characters to single in mode parameter, so i have tried with clob datatype but no luck.
CREATE OR REPLACE procedure user_details_proc (user_value1 IN varchar2,
user_value2 IN varchar2,
user_value3 IN varchar2,
user_value4 IN varchar2,
user_value5 IN varchar2,
userid IN varchar2
) as
[code].......
I have a doubt how to pass input parameter for nested table which is declared as input parameter in procedure.
CREATE TYPE t_example AS OBJECT(msg_text VARCHAR2(100), bundle_msg_text VARCHAR2(100), version NUMBER(10))
/
create type t_msg_details ia table of t_example
/CREATE TABLE table_nested_sample
(msg_codes NUMBER(10),
language_id NUMBER(10),
[Code]...
How to call this procedure I want to insert data like this
Msg_codes Language_id Language_name msg_text_details
101 1 ENG "msg_test" "Bundle_msg_text" 1
"msg_test_1" "Bundle_msg_text_2" 2
I am populating a time dimension table. One job is to assign business day with sequence number on monthly basis and by year. Business day does not include weekends and all federal holidaies.
I created a PL/SQL block to handle this job. It works. However, I haven't figure out how to pass the month number and year number into PL/SQL block automatically. Now I have to manually enter year and month number (on Toad) to pass to block to make it work. If I create it as stored procedure and write another block to call it, I can pass year and month number into parameter there like this:
exec my_sp_name ('1', '2013');
But all of these are not good enough. I want to use code to automatically pass yesr and month number into PL/SQL block. So that I can make it better. . here is the PL/SQL block I created.
declare i number := 1;
begin
for r in (select * from time_dim where calendar_month_number = &month and calendar_year= &year and business_day_flag = 'B' order by date_sk_id)
loop
[Code]....
I have added a text field on forms 6i which calls reportAfter adding the new field called "appeal_name" it gave me the desired result for two three times and somehow after that it started to throw this error
ORA- 00933. I did try to find solution on the web and was given the hint that this occurs due to space or indentation in the coding. I have used Ltrim and Rtrim to remove any space when I added the text field "appeal_name", Following code has been added
if
upper(ltrim(rtrim(:appeal_name)))!='ALL' then
where_cond:=ltrim(rtrim(where_cond))||' and upper (tbl_donation.appeal_code)='''||:blk_hsbt.appeal_code||'''';
elsif :appeal_name is null then
where_cond:=ltrim(rtrim(where_cond))||' and tbl_donation.appeal_code is null';
end if;
I want to generate a PDF report from Form Developer 6i.
View 5 Replies View Related