SQL & PL/SQL :: How To Pass Parameter To Cursor And Print Details
Aug 15, 2010
Create a PL/SQL block that declares a cursor called DATE_CUR. Pass a parameter of DATE data type to the cursor and print the details of all the employees who have joined after that date.
DEFINE P_HIREDATE = 08-MAR-00
Test the PL/SQL block for the following hire dates: 08-MAR-00, 25-JUN-97, 28-SEP-98, 07-FEB-99.
I don't know how to pass parameters. So far I have this:
SET serveroutput ON;
DECLARE
p_HIREDATE DATE := 08-MAR-00;
CURSOR c_DATE_CUR(P_HIREDATE DATE) IS
BEGIN
OPEN c_DATE_CUR();
create or replace view spic_bags as select distinct(a.item_code) Material_Code,a.uom, (case when a.card_code = '60' then case when a.ccn <> '091' then [code]........
in this above view i have hardcoded dates, well how to pass parameter for this view without hardcoding? here i need to pass the date as a parameter from a select query to view the data from the above view!
I want pass the tablename to cursor. The tablename will be a dyanamic one, as we have the data in different sources tables[multiple systems - all systems will provide the data dump to oracle] with same set of columns.
I have inserted all the tablenames in a parameter table and based on conditions daat should be fethced from each system.
I need to pass the tablename to the cursor to fetech the coloumn list from the table(the table that is passed as parametr).
i had a chart developed by graphics builder in which I am passing one parameter(ie year) and displaying the chart.Now i want to pass two parameter into chart.How to do this here i have attached my chart view and procedure which executes and display the chart from forms.
coding when button pressed
PROCEDURE CHART_DISPLAY IS pl_id ParamList; pl_name VARCHAR2(100) := 'tempdata';
[Code]....
In the above procedure i had one parameter directly am passing value of year '2009' now i want to pass two parameter like between 'year1' and 'year2' for getting chart between two years.
If I want to pass lots of informations (100 parameter) from standard HR assignment form to my custom form. I am using fnd_function.execute('called form') to launch new form.
I thinking of creating 100 parameter object but not sure it has limitation of number or not. Another ways I googled are shared PL/SQL library or parameter list which I still doubt.
create FUNCTION Cov(p_str1_x IN VARCHAR2,p_str2_x IN VARCHAR2, p_str1_y IN VARCHAR2,p_str2_y IN VARCHAR2) RETURN NUMBER is TYPE ty_varchar_assoc IS TABLE OF VARCHAR2(100) INDEX BY VARCHAR2(100); v_x ty_varchar_assoc; v_y ty_varchar_assoc; v_inter ty_varchar_assoc;
[Code]....
Now i need to pass the values to the parameter from a table? How can i do that?
I have created a simple form & report based on 2 tables Cust & cntry.I just want to display all customers of region selected in the criteria form. I am uploading the files.
I am trying to pass many characters to the in mode parameter using procedure , but i am getting the below error.
ORA-06550: PLS-00172: string literal too long
CREATE TABLE USR_DETAILS ( LOAD_ID NUMBER NOT NULL, LOAD_DATE DATE, USER_VALUE VARCHAR2(4000 BYTE), USERID VARCHAR2(4000 BYTE) ) insert into user_details values('1','2/10/2011','PROD1','USER1'); insert into user_details values('2','2/10/2011','PROD2','USER2'); [code]......
I have written the code as below...
Procedure concept :
Here i will seperate the strings(input parameters) using comma(,) symbol . Here users may pass more than 5000 characters to single in mode parameter, so i have tried with clob datatype but no luck.
CREATE OR REPLACE procedure user_details_proc (user_value1 IN varchar2, user_value2 IN varchar2, user_value3 IN varchar2, user_value4 IN varchar2, user_value5 IN varchar2, userid IN varchar2 ) as [code].......
I have a doubt how to pass input parameter for nested table which is declared as input parameter in procedure.
CREATE TYPE t_example AS OBJECT(msg_text VARCHAR2(100), bundle_msg_text VARCHAR2(100), version NUMBER(10)) / create type t_msg_details ia table of t_example /CREATE TABLE table_nested_sample (msg_codes NUMBER(10), language_id NUMBER(10),
[Code]...
How to call this procedure I want to insert data like this
I am populating a time dimension table. One job is to assign business day with sequence number on monthly basis and by year. Business day does not include weekends and all federal holidaies.
I created a PL/SQL block to handle this job. It works. However, I haven't figure out how to pass the month number and year number into PL/SQL block automatically. Now I have to manually enter year and month number (on Toad) to pass to block to make it work. If I create it as stored procedure and write another block to call it, I can pass year and month number into parameter there like this:
exec my_sp_name ('1', '2013');
But all of these are not good enough. I want to use code to automatically pass yesr and month number into PL/SQL block. So that I can make it better. . here is the PL/SQL block I created.
declare i number := 1; begin for r in (select * from time_dim where calendar_month_number = &month and calendar_year= &year and business_day_flag = 'B' order by date_sk_id) loop
I use three parameter for report. I want to show the employee who has been hired between from_date to_date,it work well in report builder. but I want to pass parameter from forms to report and pdf format. I upload my work (this is actually a zip File, change file type txt to zip just before open).
i need to pass table as input parameter in stored procedures. during the run time, i am getting error
CREATE OR replace TYPE emp_type IS OBJECT ( id NUMBER(4), ename VARCHAR2(10)); CREATE OR replace TYPE emp_type_tab IS TABLE OF EMP_TYPE; CREATE OR replace PROCEDURE Test_proc (in_emp_type IN EMP_TYPE_TAB) AS BEGIN FOR i IN 1.. in_emp_type.COUNT LOOP dbms_output.Put_line(in_emp_type.Id(i)); END LOOP; END; /
I need to get multiple code values and put it into a variable which later need to pass into the where clause of an sql. But i am not getting any results even i pass those values in the variable of an where clause: below is my Procedure:
declare TYPE crMain_record is RECORD ( v_code dummy.v_code%type, n_no dummy.n_no%type,
[Code].....
END;"lv_character" is going to hold the multiple code values which i need to pass into whare clause of the above SQL: the totlal number of these mulitipe codes can be more then 50..
And lv_character values are commung from a setup table lv_character varchar2(32767):= '('||''''||'COMMIS'||''''||' , '||''''||'AGY BUILDING BENS'||''''||')'; --And lv_character values are commung from a setup table.where "lv_character" holdes multipe code values... And lv_character values are commung from a setup table and upper(d.v_code)in lv_characterif the
I have created a stored procedure that checks if a file exists and gets a date from the file if it exists. The date is then used as a paramter. See below:
CODEcreate or replace PROCEDURE "P_Load_Stamp" AS v_exists BOOLEAN; v_length NUMBER; v_blocksize NUMBER;
[code]...
The above codes works perfectly and I scheduled it using SQLPLUS as follows:
CODEvariable jobno number; variable instno number; begin select instance_number into :instno from v$instance;
[code]...
My problem is that I need to pass the date from the above procedure as a parameter to another stored procedure. So I modified my code as follows (the parts in red):
CODEcreate or replace PROCEDURE "P_Load_Stamp" (vCTIDATE OUT varchar2) AS v_exists BOOLEAN; v_length NUMBER;
[code]...
Now it doesn't strike me as a rights issue since I created it in the schem schema. What could I be doing wrong here?
In my application (forms6i) initially data will be displayed in a non-database block after a lot of calculations and validations which is time consuming.
Now, if the user want to print it as a report, we store the displayed data in a dummy table and run the report using that dummy table and then delete records from it.
Is it possible to pass the records displayed to the report as a parameter so that I can avoid Unnecessary add/delete records?
I am using regexp_substr to break the pipe delimited string. Want to use the output as the NUMBER input to a cursor.Its not working and not getting any error also.
Here is an example.
initial input : '5545|4124|12456' using the sql below to break the string into columns. select regexp_substr('5545|4124|12456','[^|]+', 1, level)) from dual connect by regexp_substr(, '[^|]+', 1, level) is not null;
But when i try to pass the output of the above query to a cursor with input defined as number, its not accepting. I tried using to_number for the output of above query.
steps to achieve this report I need a Date Column on top of the page Depending on the selected date, Result should be displayed below for e.g.
suppose i select a date as 14-aug-2013
Enter Report Date ___________________ ( Date Picker) Location Name Report Date Quantity valueXYS 14/08/2013 5000 1200000ABCD 14/08/2013 2000 24000-------------------------------------------------------------------------------------------------TOTAL 7000 1224000
In my below query example , i have to pass more than 4000-5000 paramter in "a1.num" in below query. what is the best way to handle this, also if I pass more than 2000 paramter , the query takes a long time to execute. How can we solve the performance issue as well how I can pass more parameter.
My need is to pass multiple values as single input parameter into pipelined function. For example - "2" and "3" are values of input parameter "t":
with data as ( select 1 as t from dual union all select 2 as t from dual union all select 3 as t from dual union all select 4 as t from dual union all select 5 as t from dual ) select * from data where t in (2,3)
i have a stored procedure whose input parameter is a varchar2 datatype.i created this procedure for an interface and tibco would be calling my procedure by passing input parameters.my problem is when there is a input string with & (ambersand) then its not working.
even i tried to pass the parameter with & in TOAD, it asks me to enter value for string.look at the sample code below which i wrote for testing purpose:
procedure is:
create or replace procedure testproc(p_in in varchar2) is begin null; end;
i pass parameter as given below:
begin testproc('abc & def'); end;
if i run above script, it asks me to input some string value as it sees & in the string. attached is the image that shows up in TOAD. if i run below script it works. but i dont know how many &'s will be there in the input parameter. hence i cant do. and also TIBCO cant modify the input paramter while calling the procedure.
