Forms :: Dynamically Setting No Of Records Displayed In Block
Jun 25, 2010
i have a cursor which selects the codes based on the school records now i have a multi record block b1 the requirement is that if no of records selected in cusor is 10 then in block b1 10 records should be displayed and if it is 15 then 15 records should be displayed. Is there any way that i can set the no of records displayed in a block dynamically.The block b1 is non database block i am only using a create_record to populate the block.
View 2 Replies
ADVERTISEMENT
Nov 29, 2010
Is there any way could alter the sequence depending on specific condition to start with 1 in the form builder?
i wanna to reset the sequence to 1 whenever the month change.is there any way?
Could i make detail block invisible and whenever button pressed i will display the block? I want to put the where clause for that block in the button and if the button did not pressed i want to display nothing in the detail block?
View 1 Replies
View Related
Mar 31, 2011
I am currently on a project which has a requirement of changing the number of records dynamically. Oracle Forms version 10g.
View 2 Replies
View Related
May 30, 2010
I have a Master block and a Detail Block. They are related using two columns, Document_ID and Page_no. I want to display all the records in master table with corresponding detail records beside them in single line. i.e., as shown below:
MasterItem1 DetailItem1 DetailItem2 DetailItem3
I created the relation between them and executed query. When I execute query in the form, I can find that all the Master Items are displayed in vertical records, but i can only see one record of detail fields. They are displayed as shown below:
mitem1-value1 ditem1value1 ditem1value2 ditem1value3
mitem1-value2
mitem1-value3
mitem1-value4
When the navigate down in master items, then the corresponding detail values are being shown on the same first record.
View 1 Replies
View Related
May 11, 2010
I have a block in the form which is based of a table as data source and so when i query on the form using a execute_query inbuilt statement is fired and all the records in the table behind is retrived and displayed. Also if i need to update any record i can do in on the screen and use commit_form so that all the changes go into the underlying table. Now my problem is when i retrieving my records i want to filter those records based on some conditions to be displayed in the form and not all records to be retrieved. Is it possible to do it if I am using the execute_query inbuilt and my block is based of a table?
View 8 Replies
View Related
Dec 28, 2010
Actually m working on oracle 10g forms. I have a list item in which no. of records displayed is 10. I am populating this list item through a record group. I want when user select a value from first record then he should not be able to select the same value in further record of that list item.
View 12 Replies
View Related
Jul 20, 2011
In my application (forms6i) initially data will be displayed in a non-database block after a lot of calculations and validations which is time consuming.
Now, if the user want to print it as a report, we store the displayed data in a dummy table and run the report using that dummy table and then delete records from it.
Is it possible to pass the records displayed to the report as a parameter so that I can avoid Unnecessary add/delete records?
View 1 Replies
View Related
Jun 26, 2013
I need to populate records from a child table when the user clicks on a record in the header table..The difficulty is that the user needs to be able to edit a field from the child table and there could be 1 to many records. When the user makes a change , I don't want the 'do you want to save changes' error to appear..
the user will only be able to update field 'amt'.When the user clicks on 'declaration_no' from the header table,other records will be displayed. URL.....
View 5 Replies
View Related
Oct 13, 2011
i have a block of multiple records where the user can edit the shipment totals of products being sent to branches.
some branches can't receive certain products and usually we just default the shipment value to zero but the user can still edit that value.
What i want to do is iterate through that block and check the branch and product and set the update property to false for only that record. is that possible.
View 1 Replies
View Related
Aug 2, 2011
I want to delete records from block in the form.could you explain where(in which trigger) should i write set_block_property.
View 9 Replies
View Related
Nov 30, 2010
is there any way other than this way to retrieve the number of record displayed in the block ?
last record ;
l := :system.cursor_record
View 1 Replies
View Related
Mar 6, 2012
I have 2 blocks, namely addsubject3rd and chosensubjects. I'm copying the selected records(this comes with checkboxes) from the 1st block to the second block. But what happened is that it copied all the records that are on the addsubject3rd. How can I copy only selected records(checkboxes) from addsubject3rd block to chosensubjects blocks?
View 5 Replies
View Related
Jun 29, 2011
I am working on forms 6i.
I have datablock 'EMP', it's multi record block. I have a button 'CREATE', I have 'commit_form' in 'When button pressed' trigger, to commit records. It's working fine.
Now, i have a check box in the same block, i want to insert records which are checked only.
View 7 Replies
View Related
Sep 4, 2011
I am working in form 6i, EBS 11i. I have below requirement to achieve.
I have header data block A, line control block B. My requirement is, i know that in master detail block, if i press F11 in header block, it will clear the line block, like this, in my case if i press F11 in header data block A, i want to clear the line block B. Is there any way we can achieve this.
View 3 Replies
View Related
Jun 17, 2012
i want to retrieve records of empno from SCOTT.EMP talbe in form but without data block wizard using ..how .. and what logic will be in coding
DECLARE
TYPE EROC IS TABLE OF VARCHAR2(200) INDEX BY BINARY_INTEGER;
E1 EROC;
NO_EMPNOVARCHAR2(2000);
[code]....
just caling here EMPNO and :v_empno is fields on form...
View 1 Replies
View Related
Oct 28, 2011
Version information:
Forms [32 Bit] Version 10.1.2.3.0 (Production)
Oracle Database 11g Enterprise Edition Release 11.2.0.1.0 - 64bit Production
When an user enters a value in a field of a Screen, I want to query up the next screen records based on that user input value in the previous screen.The previous screen is based on a control block i.e.
Q_EMP
items- Q_EMP.emp_id, Q_EMP.FY, Q_EMP.hire_flag.
View 3 Replies
View Related
Dec 8, 2010
I'm using Oracle forms 10g. In the form i have this multiple records under one block. After performing the query, all records are cannot be updated. And i have this buttons at the right side that will enable the certain item that can only be updated. My problem is i cannot enable the item in the first record,instead of first record all records in that item was enable.
View 8 Replies
View Related
Aug 13, 2010
I need to filter records in a datablock based on Yes or No criteria.So i created a listitem(INCLUDE_ZERO_QTY_ITEMS) for that and i am using following code in WHEN-LIST-CHANGED trigger.
BEGIN
IF :XGEC_SW_ITEM_LOAD_ITEM_DETS_V.INCLUDE_ZERO_QTY_ITEMS = 'Y'
THEN
GO_BLOCK ('XGEC_SW_ITEM_LOAD_ITEM_DETS_V');
SET_BLOCK_PROPERTY ('XGEC_SW_ITEM_LOAD_ITEM_DETS_V',
default_where,
'1=1');
[code]....
I am able to filter the records but the list item is not displaying initial value and the value that i am selecting from poplist.
View 1 Replies
View Related
Aug 31, 2011
I am working in form 6i, EBS11i. I have a multi record data block, i am inserting checked records only using below logic.
ON-INSERT Trigger:
if checkbox_checked('block.checkbox') THEN
insert_record;
end if;
Requirement: Let us say, i have 4 records, i checked 2 records.. inserted them. Now if i want to insert other 2 unchecked records, it's not accepting, is it possible to insert records which are not checked after insertion.
View 5 Replies
View Related
Nov 22, 2012
I have a master table A that has 10+ columns along with data and a configuration table B that has only 2 columns i.e table name and column name. For ex:-
Table A:-
C1 C2 C3 C4 C5 C6
-- -- -- -- -- -----
1 2 3 4 3 6
4 5 6 5 5 5
Table B:-
Table_Name Column_Name
--------- ----------
A C1
A C2
A C3
Now I need to write a sql script that should take the table A Columns defined in Table B and then based on the columns it should spool the columns output from Table A.
For above ex:- I need to spool the C1,C2,C3 columns data from Table A in to some Unix path using SQL SCRIPT.
View 2 Replies
View Related
Jul 28, 2010
I need to load data from a CSV file where one of the CSV values determines how many records should be inserted.
Example of the input data:
KEYWORD;2;REC1_COL1_X,REC1_COL2_X;REC2_COL1_X;REC2_COL2_X
KEYWORD;3;REC1_COL1_Y;REC1_COL2_Y,REC2_COL1_Y;REC2_COL2_Y;REC3_COL1_Y;REC3_COL2_Y
KEYWORD;4;REC1_COL1_Z;REC1_COL2_Z,REC2_COL1_Z;REC2_COL2_Z;REC3_COL1_Z;REC3_COL2_Z,REC4_COL1_Z;REC4_COL2_Z
If the KEYWORD is found, then the next value determines how many value pairs will follow, and therefore how many rows should be created in the affected DB table.
As a result I hope to achieve this:
SELECT Column1, Column2 FROM testTable
REC1_COL1_X,REC1_COL2_X
REC2_COL1_X;REC2_COL2_X
REC1_COL1_Y;REC1_COL2_Y
REC2_COL1_Y;REC2_COL2_Y
REC3_COL1_Y;REC3_COL2_Y
REC1_COL1_Z;REC1_COL2_Z
REC2_COL1_Z;REC2_COL2_Z
REC3_COL1_Z;REC3_COL2_Z
REC4_COL1_Z;REC4_COL2_Z
I learned how to import data using Oracle SQL loader for cases where one input line more or less matches a (new) row in a DB table.
View 9 Replies
View Related
Nov 29, 2012
below requirement..
We have certain records like SQL, PL/SQL, Reports, Forms, OAF etc in a table. We wanted to capture rating for each of these criteria. So we want a form to be displayed dynamically..
SQL 1 2 3 4 (1,2,3,4 represent radio buttons)
PL/SQL 1 2 3 4
Reports 1 2 3 4
Forms 1 2 3 4
OAF 1 2 3 4
If we add another row, XMLP in that table additional radio button should be displayed automatically..
View 4 Replies
View Related
May 13, 2011
is that datablock should have related to show the stacked which is hidden in content canvas
i have attached the stack.fmb
View 9 Replies
View Related
Mar 27, 2012
In my form I have a submit button, when i click on it a sequence number to be generated and displayed in a text box.
I have created a sequence and tried inserting into table, it works fine however it's not getting displayed in form.
Note: Tried giving sequence.sequence_name.nextval in initial value of the text box, didn't work showed FRM-11324 error.
--When button pressed--
DECLARE
v_seq number(20);
BEGIN
select seq_name.nextval
into v_seq
from dual;
[Code]...
View 15 Replies
View Related
Nov 19, 2010
i have multi data block filed. and checkbox field which based on control block...My task is when i check checkbox only one field should enabled and my mouse goes to that field
e.g
item11 item21 item31 chkbox1
item12 item22 item32 chkbox2
Scenario like this :
My item field based on data block and checkbox based on control block,while i checked chkbox1 , only item31 on that current record should be enabled and i changed value only on that field
when i checked chkbox1 , my cursor goes to item31...not item32
View 12 Replies
View Related
May 5, 2012
i have a master detail form, In Master block we have one field cheque amount and in Detail block we have field receiveable amount invoice wise. if company paid us a cheque amount we will enter this amount in Master block field Cheque amount and in detail block there will be invoice wise receivable amounts. i want to distribute the cheque amount in detail block invoice wise for example
Cheque amount in master block = 291
Invoice wise receiveable amount is as follows
Invoice No , receivable amount , Received amount
10, 196 , 0
20 , 95 , 0
30 , 54 , 0
Result should be as follows:
Invoice No , receivable amount , Received amount
10, 196, 196
20 , 95 , 95
30 , 54, 0
Received amount field should be distributed according to the receivable amount when recevied amount = cheque amount then remaining will be 0.
View 2 Replies
View Related
Jul 24, 2010
I have a multi record control block (basically a text item displaying 6 records) where user enters values and I want to process the values using pre-insert trigger.
I want to read value in each record and then do some tasks using a pre-insert trigger before I commit the values. To navigate between the records I was using first_record, next_record, clear_record built-ins but it gives errors like "40737-illegalrestricted procedure next_record in pre-insert trigger".
View 3 Replies
View Related
Nov 8, 2011
How do I loop through a Input parameter (varchar_table) and pass the input value to a select query.
Procedure Test
(
param1 IN dbms_sql.varchar2_table
)
[Code]....
1. How do I define temp_tbl and is it a best practice to use temporary table - if not what is the best method to do the same.
View 5 Replies
View Related
Jan 27, 2011
've form which is having 3 tabs in canvas, i want to open second tab first when we open form,
View 4 Replies
View Related
Sep 30, 2013
I am currently working on a bug that came from a user. An oracle form is used for entering employee information and the backend table is employees. One for the field here is LAN ID. It was found that some users were using space bar either before or after entering the Lan id and this is causing issues in finding the employees in the system. A request is being submitted to not let any blanks or space to be entered in the field. In the table, this particular field/column datatype is varchar2 and the size is 8.
How do I make no blanks or spaces to be entered in the field or otherwise, even if they put a space or blank, the field should only use the actual ID entered.. Is it possible?
View 9 Replies
View Related
