I am working on forms 6i.
I have datablock 'EMP', it's multi record block. I have a button 'CREATE', I have 'commit_form' in 'When button pressed' trigger, to commit records. It's working fine.
Now, i have a check box in the same block, i want to insert records which are checked only.
I am working in form 6i, EBS11i. I have a multi record data block, i am inserting checked records only using below logic.
ON-INSERT Trigger:
if checkbox_checked('block.checkbox') THEN
insert_record;
end if;
Requirement: Let us say, i have 4 records, i checked 2 records.. inserted them. Now if i want to insert other 2 unchecked records, it's not accepting, is it possible to insert records which are not checked after insertion.
I have a multi record control block (basically a text item displaying 6 records) where user enters values and I want to process the values using pre-insert trigger.
I want to read value in each record and then do some tasks using a pre-insert trigger before I commit the values. To navigate between the records I was using first_record, next_record, clear_record built-ins but it gives errors like "40737-illegalrestricted procedure next_record in pre-insert trigger".
I am working on form builder 6i. I have multi record datablock 't1'.' I have 'Submit' Button, which contains 'commit_form'. I am able to insert records.
Now i have a check box in data block, i want to insert records which are checked. I followed below thing to achieve that.
ON-INSERT Trigger:
If check_box ='Y' THEN
INSERT_RECORD
end if.
SUBMIT BUTTON: commit_form.
Let us say, i have 5 records, 2 records are checked, after clicking SUBMIT button, it's inserting 2 records only. But in console window, it's showing '5 transactions are saved'. I want see '2 transactions are saved' message in console window.
How to get it or any other solution which will insert records which are checked and show correct message in console window.
I have a multi-record block with a check box(:B_ASTHEAD.CB_CHECK) for each record. user can select the record by clicking on the check box. when checked, value is 'Y' and when unchecked, value is 'N'.
when user clicks on 'OK' button (when button pressed trigger), the records which are selected(Checkbox) must be posted to the database table.
L_last_Rec number;
L_first_Rec number;
L_AST COP_DETL.AST%TYPE;
BEGIN
[Code]....
The issue here is , check box selected records are not getting inserted into table when OK button is clicked and i could see that all checked checkboxes become unchecked immediately . But if i comment the --"if :B_ASTHEAD.CB_CHECK = 'Y' then " part, then insert works , but inserts all record.
Insert only checkbox selected records.
i have two blocks called BLOCK1 AND BLOCK2
BLOCK1 is a multi record block with a field, FIELD_A
BLOCK2 is a multi record block with fields FIELD_B,FIELD_C,FIELD_D
i have a button on BLOCK1 called 'FETCH'.
The requirement is when_button_pressed on 'FETCH'. BLOCK2 must be populated for each record of BLOCK1. Population logic is based on, values from a database table TABLE_A which has got column values corresponding to all fields of BLOCK1 and BLOCK2.
I have two block namely block-A, Block -B
Block A data queried from a view (it have 10 columns).
Block b (it have 5 columns all columns are same in block A column)
When i query of block - A i have to receive the same copy in Block B too.
I have a master detail form and in the detail block when i am scrolling up the records are getting disappeared , but actually they are not getting deleted, once if i requery the data will appear, what could be the problem.I am using the property change record for block.
View 5 Replies View RelatedI have a multi record block, which, once filled, I do not want to allow manual insertions from the last new record. For that, I do:
set_block_property('block name', insert_allowed, property_false)
The problem comes, when I want to change a checkbox item column from one record already informed.
I can not do that, after setting the block property, although I change item properties accordingly.
I have a form with 3 blocks in our oracle application. Block1 is a single record block. Block2 and block 3 are multi record blocks with no of records 5. Block1 and block2 are in same canvas1 of a window1. Block3 is in canvas2 of window2. There is a relation between block1 and block2. Another relation with block2 and block3 is also available.
Now my issues is while creating a record, first i entered the data in block1 (which is a single record block). Then i entered data in five rows of second block. Then i entered data in block3(multi record block) by pressing the button in block2 (each button for each row). But before saving the entire form, when i checked the data in block3 by pressing the button of first record of block2, screen shows empty.
Code in button of block2 is as follows
show_window(WIN2');
Go_block('BLOCK3');
Code in button of block3 is as follows
hide_window('WIN2');
go_block('BLOCK2');
If post; is included in block3 button. then problem we will be solved. But we don't want to use post; as it lock the table.
I want to ask what's wrong with my multi-record block.
When i click a node on my tree, it should display the records on it. For example, my root node is Sections, the parents are 1st sem and 2nd sem. In each sections in 1st sem, whenever i click a child node, it should display on display items. I have set its number of items displayed to 9. Since each sections have 9 subjects. The problem when i run it is that it displays many rows.
i have form have one multi record block and sing record block. In multi record block having an item namely Excise_value. I want to find the sum of total Excise_Value for all the record. How to accomplish this.
PS: I want to use the Formula/summary property in forms
I have a problem validating a multi-record block. I need to put the validation after the user clicks save. The custom validation should run through all the records in the multi-record block. But instead of validating all records, it will only validate the record where the cursor is located before the user hits save.
View 1 Replies View RelatedCould i uncheck the checked checkboxes in a mutirecord block by any command?
View 1 Replies View RelatedI have data block that has hundreds of records. On a screen I display 20 records at a time. On that same screen I have "find badge" function where user types badge/employee id and presses a button to find the record in a data block. I have no problem finding the records in a list and pointing the curser to appropriate record. My question is (which is a user request) if the badge/employee id is found to make that record to be the first record in a list.
View 2 Replies View RelatedThe main qn is in the subject line.
I have used the following code
GO_BLOCK('CHILD_BLK');
FIRST_RECORD;
LOOP
IF NVL(:CHILD_BLK.SELECT_FLAG,'N')='Y' THEN
V_REC_NO := GET_BLOCK_PROPERTY('CHILD_BLK',CURRENT_RECORD);
SET_ITEM_INSTANCE_PROPERTY('CHILD_BLK.ASSET_DESC',
V_REC_NO,
[code]....
I have a multi-record block with several text items.
On one of the text items i want to enter a value and then check whether the same value for the item has already been entered on any other records within the block.
If it has already been entered then i want to display a message and null out the field.
I have tried using app_record.for_All_records from a when-validat-item trigger but this does not work as you get a 'FRM-40737 Illegal restricted procedure go_block in when-validate-item trigger ' error
I'm using Oracle forms 10g. In the form i have this multiple records under one block. After performing the query, all records are cannot be updated. And i have this buttons at the right side that will enable the certain item that can only be updated. My problem is i cannot enable the item in the first record,instead of first record all records in that item was enable.
View 8 Replies View Relatedi want to insert a record in table when one of item in database block is filled..from which property i knw my one of field in block is filled or not.
View 2 Replies View Relatedi have multi data block filed. and checkbox field which based on control block...My task is when i check checkbox only one field should enabled and my mouse goes to that field
e.g
item11 item21 item31 chkbox1
item12 item22 item32 chkbox2
Scenario like this :
My item field based on data block and checkbox based on control block,while i checked chkbox1 , only item31 on that current record should be enabled and i changed value only on that field
when i checked chkbox1 , my cursor goes to item31...not item32
My procedure proc_ex is in when_validate_item trigger
I have one Multi Record data block in my form with values in its items
I need to Populate multi record block values to one Record Group using
add_group_row,
add_group_column,
set_group_char_cell to populate values to record group
Let us suppose my multi record data block looks like
item1 item2 item3 item4
10 20 50 70
25 15 30 45
45 90 47 38
75 25 85 90
30 56 78 80
how to populate these multi record datablock values to Record Group ???..Eagerly waiting for your Replies
i want to count how many check boxes are chechked and if the check box is unchecked the count will decrease as soon as checkbox is check or uncheck.the number of chech boxes are depentdent on record set that are fetched from database.
View 2 Replies View RelatedHow do I insert a new record in a Data Block, and the standard is always insert a line below, you could add a record above?
View 1 Replies View RelatedI have a multi row datablock with scroll bar. In each record I have a checkbox (let's call it check_record), and above these checkboxes, there is a checkbox to check/uncheck all the checkboxes (let's call it check_all).
If all the "check_record" are checked, the "check_all" must be automatically checked, else if one "check_record" is not checked, it will be unchecked.
To do that, I have put a loop in the WHEN-CHECKBOX-CHANGED of "check_record" to loop over all the "check_record" and see if they are checked or not.
Normally, this loop will automatically go to last record. But to go back to the selected record (where the "check_record" was clicked), I have used go_record with the record ID.
==> No problem in that, it's working fine.
Now, this is my problem: When clicking on a "check_record", the scroll bar moves to show the selected row in the first (or last) VISIBLE row in the data block, and that's because of using "GO_RECORD(<CURRENT_RECORD>)".
Example: if I select the third record in the data block, the scroll bar moves to show it in the first visible row.
Is there a way to "freeze" the scroll bar and keep the record in its initial position in the data block?
i have one multiple record field in frm....contain 5 field.....now i display the values...3 fields have values and two are empty...
the value of 1st field is A
2nd field is B
3rd field is C
i want if i click B it will open another form,
i want if i click c it will open another form,
I am using forms 10g...
I have 2 blocks,in one i insert student_id and when i click on the button i should get all his courses in the other block...
BUT.. when the student has more than 1 course I get this:
when button pressed trigger raised unhandled exception ORA-01422
Here is the button
begin
select TEST_STUDENT_INFO.stud_name,TEST_STUD_CRSE_DETAIL.crse_no,
TEST_COURSES.crse_name,TEST_STUD_CRSE_DETAIL.crse_type,TEST_STUD_CRSE_DETAIL.crse_type_desc,
TEST_COURSES.crse_time
INTO :stud_name,:crse_no1,:crse_name,:crse_type1,:crse_type_desc1,:crse_time
from TEST_STUDENT_INFO,TEST_COURSES,TEST_STUD_CRSE_DETAIL
where (TEST_STUD_CRSE_DETAIL.STUD_ID =:TEST_STUD_CRSE_REG.STUD_ID)
and (TEST_STUDENT_INFO.STUD_ID =:TEST_STUD_CRSE_REG.STUD_ID)
and (TEST_COURSES.CRSE_NO = TEST_STUD_CRSE_DETAIL.CRSE_NO)
and (TEST_STUD_CRSE_DETAIL.CRSE_TYPE = TEST_COURSES.CRSE_TYPE);
end;
but if the student has ONLY ONE course it WORKS FINE!
Consider below is a multi record block rows, i want to hide "23". Is it possible using Set_Item_Instance_Property or any other built-in is there in oracle forms to hide a single row field in a multi record block.
11 12 13
21 22 23
31 32 33
. . .
As from the title can i high light some records in a data block? I am fetching almost 10 - 12 records in a datablock and it is working perfectly fine. but there are some records coming in the block which i want to make permanently red or dimmed just showing as they are black listed. is this possible?? or i have to try some other way??
View 10 Replies View RelatedMy Requirements:
1. i want to create form for student's attendance.
2. for this purpose i create a form . and create 2 Data Blocks
1. Non Database Data Block (layout type: form)
2. Database Data Block (layout type: Tabular)
3. in Non Database Data Block i add 3 Items.. on the basis of i get the records from database and show them into my into my 2nd Data Block...
4. my problem is this that how can i get records from database and show them into my forms and then save thats records into my table by using Database Datablock.
I have problem i want to to display in message all the values of block in for example when i create the fourth record the three already records are show in message..actually first i want to in message than i would populate pl/sql table. the code is at block leve when-new-reocord-instance
************************************************************
declare
v_record number :=1 ;
v_cur_record number;
begin
v_cur_record :=:system.cursor_record;
[code]......
actually in block there are three record and this message should be display for the three time but the loop is executed more time.