TNS-12514: TNS:listener does not currently know of service requested in connect descriptor
When I try to start in services, is returned the OS error 1067. This error starts to occur when I did the follow. I executed a PLSQL command to fill a (big) table with a lot of data. More than 1 day after and while the program still running, I broke the program. After that, Oracle was consuming lot of disk. I broke the process (using taskkill /f) and, after that, the database stopped working.
What I can do to recover my database?Below I list my listener.ora and tnsnames.ora
I installed Oracle 11.2.0.1.0 Enterprise Edition on my home laptop computer running Windows 7 Professional months ago, set the services to start automatically and it had been working fine, with multiple shutdowns and re-starts per day, until today. I was using it earlier today, then shut the laptop down, went to lunch, turned it on again, tried to login through SQL*Plus and got:
SQL*Plus: Release 11.2.0.1.0 Production on Sat Feb 12 15:48:39 2011
Copyright (c) 1982, 2010, Oracle. All rights reserved.
Enter user-name: scott/tiger ERROR: ORA-12560: TNS:protocol adapter error
Enter user-name:
I tried restarting the computer, but still got the same result as above.I went to:
Control Panel -> System and Security -> Administrative Tools -> Services
and confirmed that the Oracle services were still set to start automatically. The OracleOraDb11g_home1TNSListener showed started. The OracleServiceORCL showed that it was set to start automatically, but did not show started or starting or stopped. The only option displayed for it was start, not pause or stop or restart, implying that it was not started. My computer had been on long enough that it should have started and it did not show that it was trying to start or give any indication that it had tried to start and failed and showed that it was set to start automatically.
I clicked on the start option, it started, and I was able to login. If I have to, I can live with this as a workaround, but I would prefer that it start automatically like it is supposed to. I find it puzzling since it had been working and I did not change anything, at least not intentionally. The only thing that I can think of that I did differently recently was experimenting with cursors and dbms_sql in order to intentionally reproduce the error "ORA-29471: DBMS_SQL access denied" to demonstrate it in response to a thread on the SQL and PL/SQL forum: [URL]. However, after reproducing the error, I corrected it and was still able to exit SQL*Plus and log in again until I shut down the computer and re-started. I don't know if this is related or coincidence.
using Firefox 8.0 and found that I was "unable to connect". I found that although my OracleDBConsoleorcl service was set to automatic, it was not started. So, I attempted to start it from the Windows services menu, but received a message that Windows could not start it and it said to see the System Event Log. So, I checked the Windows System Event Log and found:
"The OracleDBConsoleorcl service terminated with service-specific error The system cannot find the file specified."but it does not tell me the name of the file or directory path. So, where do I go from here? I did not want to hijack the other thread, so I started a new one, especially since the original poster was able to start this service. Is there a different way to try to start the service that might provide more information?
I have been using this installation for a long time and seem to remember this working once upon a time, but I could be wrong. I don't usually use Enterprise Manager, so this is not something critical, just a curiosity, and something that I might like to explore. I have provided version and system info below.
-- Oracle version info: SCOTT@orcl_11gR2> select * from v$version; BANNER -------------------------------------------------------------------------------- Oracle Database 11g Enterprise Edition Release 11.2.0.1.0 - 64bit Production PL/SQL Release 11.2.0.1.0 - Production CORE 11.2.0.1.0 Production TNS for 64-bit Windows: Version 11.2.0.1.0 - Production NLSRTL Version 11.2.0.1.0 - Production
5 rows selected.
-- partial systeminfo (some lines like product key removed): C:>systeminfo OS Name: Microsoft Windows 7 Professional OS Version: 6.1.7601 Service Pack 1 Build 7601
I've installed oracle 11.2 in Windows 7 - 64 bits. Everything was working fine until suddenly stops working. Oracle Service (OracleServiceORCL) doesn't start and when I try to start manually, returns OS error 1067. Listener starts well. Below I list my listener.ora, sqlnames.ora and sqlnet.ora
I just finished my first course in SQL for Oracle 11g at my local community college. We used SQL*Plus for the coursework and for the next class I need to use SQL Developer. Initially, I installed the Developer and was unable to establish a test connection due to the listener not being installed. I fiigured out that I needed to use the Network Configuration Assistant to add and configure the listener. After doing so, I was able to connect using Developer. The issue, however, is that any time I restart my computer, the TNS Listener service disappears from the list of services in Task Manager and I have to delete and then add and configure the service again using Network Configuration Assistant. Obviously, the Listener still exists because I can delete it and then recreate it.
I tried to reinstall oracle 11g on windows 2008 R2 and couldn't complete the installation as i am unable to start the oracle service. The system gives the following error message
Instance created. DIM-00019: create service error O/S-Error: (OS 1053) The service did not respond to the start or control request in a timely fashion.
I try to manually create the service and it gives me the same error.I also tried to start the service using the net start as follows
C:UsersAdministrator>net start oracleserviceprod The service is not responding to the control function.
Having looked at the event viewer in windows, I noticed three different error messages as followsr
Application popup: Microsoft Visual C++ Runtime Library : Runtime Error!
R6034 An application has made an attempt to load the C runtime library incorrectly.and then A timeout was reached (30000 milliseconds) while waiting for the OracleServiceprod service to connect.
The OracleServiceprod service failed to start due to the following error: The service did not respond to the start or control request in a timely fashion.
I have created a program to access a oracle database using oracle.data access, .net framework 4, visual studio 2010 in C#. The program runs without any problem. If I try to create a windows service, I receive the error
Service cannot be started. System.BadImageFormatException: Could not load file or assembly 'Oracle.DataAccess, Version=2.112.3.0, Culture=neutral, PublicKeyToken=89b483f429c47342' or one of its dependencies. An attempt was made to load a program with an incorrect format. File name: 'Oracle.DataAccess, Version=2.112.3.0, Culture=neutral, PublicKeyToken=89b483f429c47342'
when i execute the command
GlobalVariables.conn = new OracleConnection(oracelString);
Is there a way to have separate wallets for each windows user? Well, I have found a way, but does not seem to work always properly and that is with %USERNAME% environment variable.
This is how our customer want's to have - so separate wallet for each windows user, how to accomplish this without using %USERNAME%?
I created a script to make my admin server a windows service. I successfully made it a service but when it starts it then shuts itself down. i ran a debug and found a error. I dont get what to do. I have tried changing the variables in the script and try it over and over again .....here is my script code and here is the error i got from debug output:
script
SETLOCAL set DOMAIN_NAME=FRClassicDomain set USERDOMAIN_HOME=C:/Oracle/Middleware/user_projects/domains/FRClassicDomain set SERVER_NAME=FRweblogic
I am getting problem while starting the CRS. Below is the necessary details:
1) I am using oracle 11g R2 RAC, with 2 node named RAC1 and RAC2
2) I have 3 diskgroup named DATA, DATA1, DATA2
3) OCR and voting disks are stored on ASM diskgroup
On node RAC1, CRS is started and /etc/oracle/ocr.loc is having the below entry:
ocrconfig_loc=+DATA ocrmirrorconfig_loc=+DATA1
On node RAC2, CRS is stopped and /etc/oracle/ocr.loc is having the below entry:
ocrconfig_loc=+DATA ocrmirrorconfig_loc=+DATA2
Please note the difference in "ocrmirrorconfig_loc". The difference was occured because I updated the OCR location on RAC1 when RAC2 was down.
Now I am trying to repair the OCR on the RAC2 using below command. This command must be run as root user when HA service is started but CRS must be stopped.
but this showing error "PROT-21: Invalid parameter", because to run this command diskgroup must be mounted. But diskgroup cannot be mounted until the CRS start. SO this is a conflicting situation.
when i start the Oracle database, the database is mounted. Then when i issue the "alter database open resetlogs" command, i got the below error.
ERROR at line 1: ORA-01194: file 1 needs more recovery to be consistent ORA-01110: data file 1: '/data/oracle/NYP15S1D/data03/SYSTEM_01.dbf'
So i added the parameter "_allow_resetlogs_corruption=TRUE" in "init.ORA" file to force open the database but the Oracle instance crashed with following message.
I am done with my configuration for oracle HS to connect to SQLserver. When I tried to start my listener, it is giving the following errors.
----------------------------------------------------------------- TNSLSNR for 32-bit Windows: Version 10.2.0.1.0 - Production System parameter file is D:oracleproduct10.2.0db_1 etworkadminlistener.or a Log messages written to D:oracleproduct10.2.0db_1
[code]..
Contents of my listener.ora file are below -------------------------------------------------------------- LISTENERSQLODBC = (DESCRIPTION_LIST = (DESCRIPTION = (ADDRESS_LIST=
today i have restarted the database server (11gR2) after that database service is not starting, the error message is
ERROR: ORA-01034: ORACLE not available ORA-27101: shared memory realm does not exist Linux-x86_64 Error: 2: No such file or directory Process ID: 0 Session ID: 0 Serial number: 0
When I am trying to enter to the enterprise manager of oracle 11g, but it is not working. In my services list the 'oracledbconsoleorcl' is assigned as automatically to start with windows. But it is not starting. When I tried to start it manually the following message is displayed repeatedly even after restarting the pc.
'Windows could not start the oracledbconsoleorcl on Local computer. For more information, view the system event log. If this is a non-Microsoft services, contact the service vendor, and refer to service-specific error code 2.' In the event log the following error messages are displayed:The OracleDBConsoleorcl service terminated with service-specific error 2 (0x2). and
The OracleCSService service failed to start due to the following error: The service did not respond to the start or control request in a timely fashion.
We have a .NET application on windows server 2008 32bit using the stored procedures on an Oracle 10g environment. We are trying to deploy the .NET application onto a 64bit x86 Windows server 2008.
We face an error trying to install the x64 version of the Oracle 10g client on windows 2008. The error we get is Problem signature:
Problem Event Name: APPCRASH Application Name: javaw.exe
Is the x64 version of the Oracle 10g client certified for Windows 2008? Has anyone successfully installed the 64bit version of the oracle client on win2008?
We have a workaround in place with 32 bit version of the client running with the 32 bit version of the .NET application on x64 win2008. However to maximize the infrastructure we need to use the 64 bit version or we would have to turn to MSSQL Server .
begin send_sms('myemail@server.com', '9822553277@smsserver.com', 'My Subject', 'My Message'); end;
ORA-29278: SMTP transient error: 421 Service not available ORA-06512: at "SYS.UTL_SMTP", line 21 ORA-06512: at "SYS.UTL_SMTP", line 97 ORA-06512: at "SYS.UTL_SMTP", line 139 ORA-06512: at "ADMIN.SEND_SMS", line 13 ORA-06512: at line 2
Oracle 11.2.0.3 - newbie on web services! Currently we have a pl/sql web service taking in 2 static parameters and returning a varchar2 response.
I was asked today if it's possible for a web service to take in a dynamic set of parameters and return a corresponding set of results. It's as if I need to pass the web service a table with two columns and return a table of one column.
For example:
Input Output 1 2 3 3 4 7 5 6 11output being in XML of course. It is possible?
I posted this in OC4J also - no response hence the re-post !
Database: oracle 9i sitting on a 32 bit machine. Client: windows7 64 bit computer installed oracle 11gr2 client
Is there a way to connect to oracle 9i database from C:WindowsSysWow64odbcad32.exe on windows 7 machine? or what is the possible way to connect to Oracle 9i database?What we need is to run crystal reports from windows 7.
I have oracle8i database on windows 2008 but not a domin server now i have domin server and i want to join this server on domin network i try to join domin it fine but my oracle8i service did not start what to do ?
old hostname=bagmati afterchange hostname=bagmati.alkatel.org.np
I have been reading a lot of documentation regarding oracle services and I have an ok understanding of how they work. However, I have a general question regarding configuring services using Oracle RAC. For instance, if I have a 2 node oracle 11GR2 RAC on a Linux Redhat server. I have an application that connects to a service I have created. I create the service as follows.
srvctl add service -d ORCL_RAC -s APP_SERVICE -r ORCL_RAC1,ORCL_RAC2
1) When I do a 'srvctl status service -d ORCL_RAC', should I see the service running on both nodes of the RAC? Or does it run only one node, then it will fail over to the other when needed? 2) If I have a RAC environment where I see two services created (RAC_SRV1 and RAC_SRV2). I see that RAC_SRV1 is only running on node1 and RAC_SRV2 is only running on node2. There are two applications sharing the same database, one application is using RAC_SRV1 and the other application is using RAC_SRV2. Am I correct in thinking that there is no failover available here? If node1 goes down, the application connecting to RAC_SRV1 will not be able to connect to node2 right? 3) In the case of the scenario in question 2 above, would it be best practise to simply create one service and have both applications connecting to the one service? Could I configure the one service to point connections from one application to node1 and connections from the other application to node2?
I have overwritten tnsnames.ora file with newone. In new tnsnames.ora file I have added new host string, remaining all unchanged.
after that, when trying to connect using sqlplus(from windows machine, sqlplusw.exe), working fine. But when trying to connect through putty getting error.
ORA-12154: TNS:could not resolve service name
for the same reason my scheduled cron tab can not run export backup. cron tab error is
EXP-00056: ORACLE error 12154 encountered ORA-12154: TNS:could not resolve service name EXP-00000: Export terminated unsuccessfully
I am suspecting problem may be due to file accessing permission related issue. But cant solve it. Current tnsnames.ora files permission is
I have a requirement wherein I need to access the MS ACCESS database table from Oracle Client.I have created ODBC data source and have configured tnsnames.ora and listener.ora for the same. As a next step I am trying to configure HS init file for hsodbc connection but couldn't find the directory hs in $ORACLE_HOME (<ORACLE_HOME>hsadmininit******.ora). Any patch that needs to be applied for hsodbc connection in the server.
but this showing error "PROT-21: Invalid parameter", because to run this command diskgroup must be mounted. But diskgroup cannot be mounted until the CRS start. SO this is a conflicting situation.
