dear all
i installed oracle database 10g
and iconnectthrowsql and it workfine but when i connect from client it give me this error
TNS: packet checksum failure
i try tnsping on the database serverit gives me the same error
I'm getting the error messaage:
Database Connection failure. Reason: java.sql.SQLException: ORA-01034: ORACLE not available ORA-27101: shared memory realm does not exist SVR4 Error: 2: No such file or directory
I'm not an Oracle expert, but I have research a little and seems that the SID could be wrong or that the DB is down, in fact I have already checked trhe server but everything seems normal to me.
I am facing an issue while rebuilding a DR (Physical Standby) site using RMAN.Rman is failing to restore all the datafiles to the stanby site.
There are 403 datafiles that should be restored among which after restoring 50-60 datafiles the channel is abruptly getting terminated.Please note this exercise is not new I have done this many times (once a year after a DR testing) and the same script is being used.The rcv file is as follows
/u03/oracle/admin/mpr/scripts/dataguard/configure_dr.rcv
connect auxiliary sys/XXXX@YYY
run {
duplicate target database for standby nofilenamecheck dorecover;
}
exit
CONFIGURE DEVICE TYPE DISK PARALLELISM 1 BACKUP TYPE TO BACKUPSET;
configure_dr.rcv: END
[code]....
The trace file says "krso_proc_add: Detected dead process 13828326; subsuming V$MANAGED_STANDBY slot
INFO: krsr_rfs_atc: RFS processes are temporarily disallowed"
I have also started RMAN debug tracing and the trace is also scanned as it is huge.I have seen the following in the trace error 3015 signalled during compilation..I do not find any specific oracle error to check on .
The only change that happened is that the Primary production server has been moved to a new datacentre and after its move all the connections seems to be working fine.
we have OS detail:
Microsoft Windows Server 2003
Standard Edition
Service Pack 2
We have upgraded our database from 9.2.0.8.0 to 11.2.0.1.0 From past 5 months database working fine but on day before yesterday we got error in alert log as
Errors in file f:appdiag
dbms rac rac race rac_ora_3732.trc (incident=41729):
ORA-04030: out of process memory when trying to allocate 524812 bytes (kxs-heap-w,kllcqgf:kllsltba)
Process startup failed, error stack:
Errors in file f:appdiag
dbms rac rac race rac_psp0_5120.trc:
ORA-27300: OS system dependent operation:CreateThread failed with status: 8
ORA-27301: OS failure message: Not enough storage is available to process this command.
ORA-27302: failure occurred at: ssthrddcr
[code].....
we have increases/decrease the process and sessions and parameter,but it doesn't work.Right now i have to submit the RCA(Root Cause Analysis) report for the same.
I had newly installed oracle 11g database, for testing & learning purpose.
Don't know wht happen to it after successfull installation , I am not able to start database.
Following error is appearing, how to resolve this.
Ora-01078:failure in processing system parameters
I can do only login to idle instance.
I m using Windows Vista Business 32 bit , Oracle 10.2.0.3
while running my setup so many time i got same error each and every time Error:12560 TNS Protocol Adapter error and it shows me i attached my screen shot with my thread , and remember i already installed earlier but at that time there was no error and successfully installed, i removed the total software before installing and i also removed my environment variable and after getting this Database Configuration Assistant failure there is no service is started regarding my database.. I also tried manually but there also i got some other problem if by Database Configuration Assistant it ll b solved then it ll be good for me.
I have a small problem with creating the SPFILE,
These are the commands i had issued :-
1. startup nomount
2. create SPFILE from PFILE ;
Then i got an error :-
ORA-01078: failure in processing system parameters
LRM-00109: could not open parameter file 'C:ORACLEORA92DATABASEINITORCL.ORA'
Ever since this happened i am unable to connect to ORACLE under any schema !
I get the following error : -
SQL> conn scott/tiger
ERROR:
ORA-01034: ORACLE not available
ORA-27101: shared memory realm does not exist
Warning: You are no longer connected to ORACLE.
WHY DOES THIS HAPPEN AND HOW CAN I OVERCOME IT ?
I successfully created a DB manually with PFILE.
I want the DB to startup with SPFILE at next login.So i fired the below command.
CREATE SPFILE='path/SPFILEPRAGAT.ORA' FROM PFILE='path/file.ora'.
But it shows the error as below:
ORA-01078: failure in processing system parameters
ORA-27040: file create error, unable to create file
OSD-04002: unable to open file
O/S-Error: (os 123) The filename, directory name,or volume label syntax is incorrect.
First I would like to thak this Burleson Consulting for providing valueable documents and information on Oracle internals .I am working on Oracle Packet Parsing. I am stuck when I am tring to understand the Packets of TNS Type ID =6 TTI ID = 0x02(Exchange of Data type representations)
I am not able to decode the Data Packet.
0.437308 192.168.1.108 192.168.1.102 TCP kwdb-commn > iax
[PSH, ACK] Seq=823 Ack=589 Win=64947 Len=67
0000 00 0c 29 0c 9a c7 00 0c 29 fd 07 3d 08 00 45 00 ..).....)..=..E.
0010 00 6b 05 15 40 00 80 06 71 55 c0 a8 01 6c c0 a8 .k..@...qU...l..
0020 01 66 04 67 11 d9 0e a7 cd b9 b6 88 7c 6e 50 18 .f.g........|nP.
[code]...
The user complains that the application is taking lot of time (approx. 45 to 60 seconds) and also getting an error
"Exception : Caused by: java.sql.SQLException: ORA-12155: TNS:received bad datatype in NSWMARKER packet"
If its run around 12 to 12:15 in the midnight, whereas it usually takes only 2 to 4 seconds.
Using Apex 4.1.1
I have button which opens up a pop-up showing a report passing some parameter in URL. The button calls the javascript function defined below:
<script language="JavaScript" type="text/javascript">
function newReport()
{
url = 'f?
[Code]...
It all works well but for security I would like to add checksum to arguments in URL. I had a look at the Javascrpt API for Apex and couldn't find any for creating a checksum I can append to the URL.
Is there one that I missed or is it possible to do it by other means?.
I am facing some problems in recovery on oracle 9.2.0.1.0 Standard Edition.
Quote:
ORA-00283: recovery session canceled due to errors
ORA-00368: checksum error in redo log block
ORA-00353: log corruption near block 43200 change 1021681146 time 10/11/2012 18:25:25
ORA-00334: archived log: '/oradb/odb/archivedata/ARCH0000002343.ARC'
FRM-92101...There was a failure in the Forms Server during startup. this could happen due to invalid configuration. Look into the web-server for the details.
Details...
Java Exception:
Oracle.forms.net.ConnectionException:Forms Session<74> failed during startup: no response from runtime process
at oracle.forms.net.HTTPNStream.getResponse(unknown source)
at oracle.forms.net.HTTPNStream.doFlust(unknown source)
[code]....
While running the test form test.fmx available in DevSuiteHome_1 ools , I get the follwing error :-
FRM - 92101 There was a failure in Forms server during startup. This could happen due to invalid configuration.
I have tried to install the software many times after deinstalling but no success. However the same software has been installed on other machines too and is working absolutely fine.
i just compile all the forms on linux server and creatge a envirement in formsweb.cfg file and create my test.env file.
then when i run OC4J and starting my application. it gave me following error
frm-92101 There was failure in forms server during startup this could be happen due to invalid configuration look your web server log file for details.
i also attached the screen shot, you can see it in attachment.
i have one problem when i make any changes in my any existing reports or just i recompile the existing report after that when i open this report its give me
error
Quote:•FRM-92101: THERE WAS A FAILURE IN THE FORMS SERVER DURING STARTUP. THIS COULD HAPPEN DUE TO INVALID CONFIGURATION
I trying to backup my database using RMAN for the first time.
using this command
RUN
{
DELETE NOPROMPT OBSOLETE;
CROSSCHECK BACKUP;
CROSSCHECK ARCHIVELOG ALL;
DELETE NOPROMPT EXPIRED BACKUP;
[Code] ......
i get this error message while running it.
Starting backup at 05-JAN-12
channel C1: starting datafile copy
input datafile fno=00004 name=/CDS/data/CDSC01.dbf
channel C2: starting datafile copy
input datafile fno=00002 name=/CDS/rbsg/undo_01.dbf
channel C3: starting datafile copy
[Code]...
I have created a materialized view log on table testing_mview_rev in 11g:
SQL> CREATE MATERIALIZED VIEW LOG ON testing_mview_rev WITH ROWID;
Materialized view log created.
And a MV on it in 10g:
SQL> create materialized view testing_mview_1_rev REFRESH Force start with (sysdate) next (sysdate+1/1440) with rowid as select * from testing_mview_rev@S58_TO_S56;
Materialized view created.
Now this is suppose to automatically refresh itself every minute but refresh is failing. However manual refresh is working fine.
what I have missed here. is there any other way to schedule the MV to run every minute?
I have a scenario wherein two columns compute a third one. i.e. quantity and unit_price computes "functional_amount". the column "functional amount" property disabled is set to true but there are a number of validations performed on it. Now when on a certain event "form_trigger_failure" is to be fired. the validation trigger fires multiple times (may be...).
the error alert that i have devised, is shown multiple times along with the message "validation at disabled item "functional amount" failed !". both of these messages follow one after the other unless i close the applet.
am trying to create a backup job in my UAT/testing instance, but with little success. I'm trying to create a backup job to disk (backup is to be stored in a drive local to the DB server) and it seems simple enough, but I keep getting the following error:
The job submission has failed for the following reason
ORA-06502: PL/SQL: numeric or value error: hex to raw conversion error ORA-06512: at "SYSMAN.DECRYPT", line 5 ORA-06512: at "SYSMAN.MGMT_CREDENTIAL", line 408 ORA-06512: at SYSMAN.MGMT_CREDENTIAL", line 1007 ORA-06512: at "SYSMAN.MGMT_CREDENTIAL", line 1400 ORA-06512: at SYSMAN.MGMT_JOBS", line 295 ORA-06512: at "SYSMAN.MGMT_JOBS", line 78 ORA-06512: at line 1
In "Recovery Settings", I have a "Flash Recovery Area Location" defined (path local to the DB -i.e. the server that the DB resides on), a "Flash Recovery Area Size" of 4 defined, and a Flashback Retention Time of 24 hours defined. Everything else is riding default values.
In "Backup Settings", there's nothing defined. Everything here is riding default values. As I understand it, not specifying a Disk Backup Location is fine so long as the Flash Recovery Area is defined. All the local services are turned on (scheduling, etc.).
If it's relevant, I mirrored the recovery/backup settings in UAT to the same as PROD, but changed what I needed to in order to accommodate the UAT environment (e.g. paths, etc.)
I have two machines with oracle 11g . Both having ODP 11.2 Beta. I've to communicate between these two machines using Oracle Advanced queuing. The message sent from one machine will reach the second machine only if the Firewall of both machine is OFF.But based on requirement, we cannot switch OFF firewall or add exceptions as ports or applications.
View 1 Replies View Relatedi'm a student currently learning database administration security.
I need to create a tablespace for administration of database but i don't know what datafile settings are best suited for admin usage.
I have attached the schema that was given to me for this assignment.
We have a server that crashed due to hardware failure and although brought back up OK Oracle DB's are no longer mounting. I am not a DBA but it looks bad to me and it seems there are no backups. This is Oracle 11G XE running on Centos 6. There is no Oracle contract here.
[root@627963 trace]# sqlplus /nolog
SQL*Plus: Release 11.2.0.2.0 Production on Thu Sep 12 23:18:26 2013
Copyright © 1982, 2011, Oracle. All rights reserved.
SQL> connect sys as sysdba;
Enter password:
Connected to an idle instance.
SQL> startup
ORACLE instance started.
Total System Global Area 1068937216 bytes
Fixed Size 2233344 bytes
Variable Size 893389824 bytes
Database Buffers 167772160 bytes
Redo Buffers 5541888 bytes
Database mounted.
ORA-03113: end-of-file on communication channel
Process ID: 10571
Session ID: 62 Serial number: 3
SQL> startup /nomount
SP2-0714: invalid combination of STARTUP options
SQL> startup nomount
ORA-24324: service handle not initialized
ORA-01041: internal error. hostdef extension doesn't exist
SQL>
Alert_XE.log:
Thu Sep 12 21:26:18 2013
Starting ORACLE instance (normal)
LICENSE_MAX_SESSION = 0
LICENSE_SESSIONS_WARNING = 0
[Code]....
I am setting a RAC on vmware follow:URL....And i have a problem in the last step when Installing Clusterware Software. Oracle Cluster Verification Utility failed. The problem is:
OCR itegrity found invalid for nodes: RAC2
OCR itegrity found valid for nodes: RAC1
I have run a standby clone that terminated with error due to few missing LV-s. I removed all LV-s for the clone, recreated them including the missing ones. I ran the clone again,but it skips the files that were successfuly duplicated in the previous clone request that failed. I need to be able to start the clone all over again, but RMAN does persistantly skip duplicating the datafiles that were successfuly processed in the first atempt.
How to ignore the RESUME option so that the clone process would start from the beginning? Where does RMAN keep the info about the successfuly duplicated datafiles in clone standby process? I have tried few RMAN tables , but no luck.
I created materialized view in Database B. The master table is in Database A. If i shutdown the database B and bring it up again, the next refresh time in dba_jobs tablein database A is coming as 01-jan-00. It is not getting refreshed automatically. The job_queue_process is 10. wat could be the reason, for the refresh failure.
View 5 Replies View RelatedIn forms when we need to make the form not to validate we will give the command, raise form_trigger_failure like that if i need to make a report not to validate further what is the command to give?
View 3 Replies View RelatedI use Oracle 9i and I created DBMS Job for run Procedure. when job run by scheduled I found Failure notify but I can not find where the detail of it. How do I find path or detail of Failure notify? I use oracle enterprise manager console.
View 1 Replies View RelatedToday, I've got an error:
$ sqlplus / as sysdba
SQL*Plus: Release 11.1.0.6.0 - Production on Wed Nov 17 09:45:50 2010
Copyright (c) 1982, 2007, Oracle. All rights reserved.
Connected to an idle instance.
idle> startup
ORA-01078: failure in processing system parameters
ORA-01565: error in identifying file '+DATA/DOISOAT/spfileDOISOAT.ora'
ORA-17503: ksfdopn:2 Failed to open file +DATA/DOISOAT/spfileDOISOAT.ora
ORA-15077: could not locate ASM instance serving a required diskgroup
idle> exit
SP2-0042: unknown command "exit" - rest of line ignored.
idle> exit
Disconnected
First time, I tried to recreate spfile from pfile, however, it - the errors continued to occur. And I searched in metalink, so, I've got ID 387217.1. I've been beging followed:
1- Check the REQUIRED_RESOURCES was listed by crs_stat -p command, wasn't it? Then, the REQUIRED_RESOURCES did not contain anything
2- Modify by Metalink comment solution:
srvctl modify instance -d <database name> -i <instance name> -s <ASM instance name>
Everything is done, however, I still did not startup database instance. The above error continued, and I force to stop all by crs_stop -all.
i tried installing oracle sql developer in my laptop and i have problem in setting up a new connection.. Which server am suppose to connect or what's the host no.: i entered the following:
connection name:sethu
username:sethu
password:sethu
connection type:basic and role:default
hostname:localhost
port:1521
SID:xe
and when i give test...
the error shown is "status:failure-test failure: IO Error: The Network could not establish the connection".