i just compile all the forms on linux server and creatge a envirement in formsweb.cfg file and create my test.env file.
then when i run OC4J and starting my application. it gave me following error
frm-92101 There was failure in forms server during startup this could be happen due to invalid configuration look your web server log file for details.
i also attached the screen shot, you can see it in attachment.
While running the test form test.fmx available in DevSuiteHome_1 ools , I get the follwing error :-
FRM - 92101 There was a failure in Forms server during startup. This could happen due to invalid configuration.
I have tried to install the software many times after deinstalling but no success. However the same software has been installed on other machines too and is working absolutely fine.
i have one problem when i make any changes in my any existing reports or just i recompile the existing report after that when i open this report its give me
error
Quote:•FRM-92101: THERE WAS A FAILURE IN THE FORMS SERVER DURING STARTUP. THIS COULD HAPPEN DUE TO INVALID CONFIGURATION
FRM-92101...There was a failure in the Forms Server during startup. this could happen due to invalid configuration. Look into the web-server for the details.
Details...
Java Exception:
Oracle.forms.net.ConnectionException:Forms Session<74> failed during startup: no response from runtime process
at oracle.forms.net.HTTPNStream.getResponse(unknown source)
at oracle.forms.net.HTTPNStream.doFlust(unknown source)
[code]....
I successfully created a DB manually with PFILE.
I want the DB to startup with SPFILE at next login.So i fired the below command.
CREATE SPFILE='path/SPFILEPRAGAT.ORA' FROM PFILE='path/file.ora'.
But it shows the error as below:
ORA-01078: failure in processing system parameters
ORA-27040: file create error, unable to create file
OSD-04002: unable to open file
O/S-Error: (os 123) The filename, directory name,or volume label syntax is incorrect.
when i want to start an report i get this error
I check all Forms path and Oracle Path in the Default.env, Formsweb.cfg and so on, everything is ok. I dont understand the Problem.
we have RAC of two nodes and EM is not running on one instance and running on another instance. when i issue emctl start dbconsolecommand it trying to start for 50 minutes but at the end, it failsi have checked the log (emagent.log) which is as follows
2012-02-29 14:18:48,971 Thread-1 Starting Agent 10.2.0.4.2 from /u01/app/oracle/product/11.2.0/dbhome (00701)
2012-02-29 14:18:48,973 Thread-1 <Agent Startup> : Startup of HTTP LISTENER failure (00716)
2012-03-01 10:25:43,414 Thread-1 Starting Agent 10.2.0.4.2 from /u01/app/oracle/product/11.2.0/dbhome (00701)
2012-03-01 10:25:43,525 Thread-1 <Agent Startup> : Startup of HTTP LISTENER failure (00716)
[code]...
and output of tail -100 emagent.trc is
2012-02-29 09:24:39,821 Thread-1 ERROR http: nmehl_startHttpListener: failed to listen to HTTP(s) port for https://db1:2928/emd/main
2012-02-29 09:24:39,821 Thread-1 ERROR main: nmehl_startHttpListener failed starting http listener.
2012-02-29 09:43:29,057 Thread-1 ERROR http: snmehl_allocateListenerPort: failed to listen on all sockets for hostname
[code]....
I am using windows Xp environment. Downloaded the software from Oracle website. Database is Oracle Express on windows. Have installed Oracle Forms 10.1.2.0.2 and OC4J also on windows xp Installation is fine and i am able to run forms same day. THe next day i am not able to run Oracle forms, i get error frm-92101 error.
I have tried posting this in various oracle forums and have not got a solution yet. I tried reinstalling. Every time i reinstall, it works for a day (the day i install, i have been able to create forms, compile and run them) but it does not work the next day. THis has happened thrice (reinstalled thrice).
Oracle JInitiator: Version 1.3.1.22
Using JRE version 1.3.1.22-internal Java HotSpot(TM) Client VM
User home directory = C:Documents and SettingsuserProxy Configuration: no proxyJAR cache enabled
Location: C:Documents and SettingsuserOracle Jar Cache
Maximum size: 50 MB
[code]...
I recently installed Oracle 10g on my windows Xp laptop. It has become considerably slow since then. I want to start the database server only when I need it, and not every time I start my laptop. I looked around in OEM and did found a way.
View 5 Replies View RelatedI have installed oracle 11g Release 11.1.0.1 on windows server 2008.I access this server from a client machine running on winXP through SQL PLUS. I wanted to shutdown and start DB server from this client machine. Accordingly i issued shutdown immediate command from SQLPLUS.
Now when i tried to start the DB with "STARTUP NOMOUNT" command i received error 12514. I understand this error means that the listener received a request to establish connections to a database but since DB services are not up and running, hence the error. So my first question is how do I resolve this error.
Continuing further, i tried to re-connect to the database as sys, and i received another error ORA-01041. So, my second question is why did i receive this error and again how can i resolve it
may be you can point me to relevant reference in Oracle documentation) how can i start and stop oracle from a client machine using SQL interface in CLI mode and windows environment and avoid this error.
MY oracle database is not starting ,at startup its giving me following error message .
ORA-00600: internal error code, arguments: [kccext_info_4], [], [], [], [], [],[], []
Alert Log file showing following message ,
Tue Apr 27 14:22:26 2010
ARC0: Becoming the 'no FAL' ARCH
ARC0: Becoming the 'no SRL' ARCH
Tue Apr 27 14:22:26 2010
ARC1: Becoming the heartbeat ARCH
Tue Apr 27 14:22:26 2010
db_recovery_file_dest_size of 2048 MB is 36.88% used.
This is auser-specified limit on the amount of space that will be used by thisdatabase for recovery-related files, and does not reflect the amount ofspace available in the underlying filesystem or ASM diskgroup.Tue Apr 27 14:22:27 2010Errors in file h:oracleproduct10.2.0adminorcl4udumporcl4_ora_3704.trc:ORA-00600: internal error code, arguments: [kccext_info_4], [], [],
[code]...
If i connect with scott user ,following message occurs ,
ORA-01033: ORACLE initialization or shutdown in progress
im new to DBA.i installed oracle on my pc but im not able to startup database...im manually creating database ..CRD files r still not created as im unable to startup nomount..im getting this error.
SQL> startup nomount
ORA-24324: service handle not initialized
ORA-24323: value not allowed
ORA-03113: end-of-file on communication channel
i almost worked on this for 10 days but im getting the same error...
We have an application that uses Oracle Forms 9i AS R2 that has been running happily for many years. There are two servers that run the client side application and provide the users with access to a single database. Two weeks ago one of the two servers started expperiencing issues, then yesterday the second server started experiencing issues also. The problem appears to relate to the Java component of the service. Typically what happens is that the user runs a batch file that starts the following java command:
C:OraHome1jdkinjava -Dorg.omg.CORBA.ORBClass=com.inprise.vbroker.orb.ORB -Dorg.omg.CORBA.ORBSingletonClass=com.inprise.vbroker.orb.ORB -Doracle.security.jazn.config=C:OraHome1j2eeOracle9iDSconfigjazn.xml -Doracle.home=C:OraHome1 -DORACLE_HOME=C:OraHome1 -jar C:OraHome1j2eehomeoc4j.jar -userThreads -config C:OraHome1j2eeOracle9iDSconfigserver.xml
This should start a service that listens for connections on port 8888. Internet Explorer then fires up and establishes a connection to the listening port. Unfortunately we never get that far. We receive the following error and the Java service never starts so the IE conection fails to connect to the service on port 8888. unexpected exception has been detected in native code outside the VM.
Unexpected Signal : EXCEPTION_ACCESS_VIOLATION occurred at PC= 0x6d3f1992
Function name=(N/A)
Library=(N/A)
NOTE:
We are unable to locate the function name symbol for the error just occurred.
Current Java thread:
at java.lang.ClassLoader$NativeLibrary.load(Native Method)
at java.lang.ClassLoader.loadLibrary0(ClassLoader.java:1419)
at java.lang.ClassLoader.loadLibrary(ClassLoader.java:1335)
[code]...
Dynamic libraries:
0x00400000 - 0x00405000 C:OraHome1jdkinjava.exe
0x7C800000 - 0x7C8C2000 C:WINDOWSsystem32
tdll.dll
0x77E40000 - 0x77F42000 C:WINDOWSsystem32kernel32.dll
[code]...
what could have happened?
I have a scenario wherein two columns compute a third one. i.e. quantity and unit_price computes "functional_amount". the column "functional amount" property disabled is set to true but there are a number of validations performed on it. Now when on a certain event "form_trigger_failure" is to be fired. the validation trigger fires multiple times (may be...).
the error alert that i have devised, is shown multiple times along with the message "validation at disabled item "functional amount" failed !". both of these messages follow one after the other unless i close the applet.
I want to shutdown the database using shutdown immediate and startup the database using startup mount.
1.)My system is client system if I connect start--> program -->Accessories --> communication --> Remote Desktop connection (connect server system) , open Run type cmd after
Shutdown immediate (database is shutdown)
Startup mount (database is mounted no problem it's working fine)
2.) But if I, open Run type cmd in client system If I run same command, I'm getting below error (ORA-12560: TNS:protocol adapter error).
C:>set oracle_sid=dbadb
C:>sqlplus / as sysdba
SQL*Plus: Release 10.1.0.2.0 - Production on ╘± ╠ß± 31 18:09:27 2009
Copyright (c) 1982, 2004, Oracle. All rights reserved.
ERROR:
ORA-12560: TNS:protocol adapter error
[code].....
3. If I run same command in Sql Plus I'm getting below error(ORA-12514: TNS:listener does not currently know of service requested in connect descriptor).
SQL*Plus: Release 10.1.0.2.0 - Production on Ôñ Ìáñ 31 18:23:13 2009
Copyright (c) 1982, 2004, Oracle. All rights reserved.
Connected to:
Oracle Database 10g Enterprise Edition Release 10.1.0.2.0 - Production
With the Partitioning, OLAP and Data Mining options
[code].....
We have Oracle Database 11g Enterprise Edition Release 11.2.0.2.0 - 64bit Production on AIX platform. We've noticed that the CPU usage on the server is slowly but steadily grows since instance restart: after the instance restart the maximum CPU usage is about 25-30%, and a month later with the comparable transactional load it's about 60-65%. In the top I see a lot of Oracle sessions each of which use about 1% of CPU, so I cannot find the one "CPU eater".
View 4 Replies View Relateddear all
i installed oracle database 10g
and iconnectthrowsql and it workfine but when i connect from client it give me this error
TNS: packet checksum failure
i try tnsping on the database serverit gives me the same error
I'm getting the error messaage:
Database Connection failure. Reason: java.sql.SQLException: ORA-01034: ORACLE not available ORA-27101: shared memory realm does not exist SVR4 Error: 2: No such file or directory
I'm not an Oracle expert, but I have research a little and seems that the SID could be wrong or that the DB is down, in fact I have already checked trhe server but everything seems normal to me.
I am facing an issue while rebuilding a DR (Physical Standby) site using RMAN.Rman is failing to restore all the datafiles to the stanby site.
There are 403 datafiles that should be restored among which after restoring 50-60 datafiles the channel is abruptly getting terminated.Please note this exercise is not new I have done this many times (once a year after a DR testing) and the same script is being used.The rcv file is as follows
/u03/oracle/admin/mpr/scripts/dataguard/configure_dr.rcv
connect auxiliary sys/XXXX@YYY
run {
duplicate target database for standby nofilenamecheck dorecover;
}
exit
CONFIGURE DEVICE TYPE DISK PARALLELISM 1 BACKUP TYPE TO BACKUPSET;
configure_dr.rcv: END
[code]....
The trace file says "krso_proc_add: Detected dead process 13828326; subsuming V$MANAGED_STANDBY slot
INFO: krsr_rfs_atc: RFS processes are temporarily disallowed"
I have also started RMAN debug tracing and the trace is also scanned as it is huge.I have seen the following in the trace error 3015 signalled during compilation..I do not find any specific oracle error to check on .
The only change that happened is that the Primary production server has been moved to a new datacentre and after its move all the connections seems to be working fine.
we have OS detail:
Microsoft Windows Server 2003
Standard Edition
Service Pack 2
We have upgraded our database from 9.2.0.8.0 to 11.2.0.1.0 From past 5 months database working fine but on day before yesterday we got error in alert log as
Errors in file f:appdiag
dbms rac rac race rac_ora_3732.trc (incident=41729):
ORA-04030: out of process memory when trying to allocate 524812 bytes (kxs-heap-w,kllcqgf:kllsltba)
Process startup failed, error stack:
Errors in file f:appdiag
dbms rac rac race rac_psp0_5120.trc:
ORA-27300: OS system dependent operation:CreateThread failed with status: 8
ORA-27301: OS failure message: Not enough storage is available to process this command.
ORA-27302: failure occurred at: ssthrddcr
[code].....
we have increases/decrease the process and sessions and parameter,but it doesn't work.Right now i have to submit the RCA(Root Cause Analysis) report for the same.
I searched the knowledge base here and in other forums and haven't found the answer. There was a similar condition presented earlier, but it turned out the resolution was to run the >shutdown/>startup on the server rather than from a client. Not applicable in my case!
Shutdown and startup called used to work with 9i, now startup fails in 10g. ORACLE_HOME and ORACLE_SID are set and report correct values. What is different in 10g that the script (shown below) now throws a TNS listener error after shutdown?
I successfully upgraded from 9i to 10g (10.2.0.5.0) on Windows Server 2003, 32-bit last weekend. Now our backup_script.bat and oracle_stop_start.sql throw "ORA-12514: TNS:listener does not currently know of service requested in the connect descriptor"
This batch file and sql script predate me and worked with 9i for years. Now the startup command in the oracle_stop_start throws this error after executing shutdown. The backup batch file calls:
sqlplus "system/manager@wind as sysdba" @D:ptcwindchillackupsoracle_stop_start
The entire oracle_stop_start.sql is as follows:
shutdown immediate;
startup open;
quit
What is different in 10g that this now doesn't work? Shutdown works, but it will not startup due to the listener error. I have made the backups work by commenting out the call to sqlplus and I'm getting good backup dumps.
In my virtual image of the server I have found that I can duplicate the error after >shutdown. I have found that if I exit sql*plus and go back in as follows I can get the database instance to restart from the command line:
c:>sqlplus /nolog
sql>connect sys/* as sysdba
sql>startup open wind;
That does start, mount and open the database instance.
Is there a better way to be making sure that everything is stopped before executing the >exp command to create a backup dump? I will look into and test datapump export/import and RMAN for creating the backups, after I get this working again.
why this worked in sql*plus in 9i but not in 10g? Can I make TNS Listener smarter? Change or add variables to the startup command?
I had newly installed oracle 11g database, for testing & learning purpose.
Don't know wht happen to it after successfull installation , I am not able to start database.
Following error is appearing, how to resolve this.
Ora-01078:failure in processing system parameters
I can do only login to idle instance.
I m using Windows Vista Business 32 bit , Oracle 10.2.0.3
while running my setup so many time i got same error each and every time Error:12560 TNS Protocol Adapter error and it shows me i attached my screen shot with my thread , and remember i already installed earlier but at that time there was no error and successfully installed, i removed the total software before installing and i also removed my environment variable and after getting this Database Configuration Assistant failure there is no service is started regarding my database.. I also tried manually but there also i got some other problem if by Database Configuration Assistant it ll b solved then it ll be good for me.
My requirement, if there is no record in emp table when validate the EMP_NO_CHK text field, i need to set the focus on that field (EMP_NO_CHK) itself. But while execute the following code, I got error.chieve the task.
--EMP_NO_CHK_WHEN_VALIDATE_ITEM Trigger
-----------------------------------
Declare
cursor c is Select * from emp where Emp_no = :header.empno;
c1 emp%rowtype;
n NUMBER;
[code]...
Find an appropriate script to automate Oracle DBs in one server? This db server have 6 instances. We always done the starting up and shutting down manually, although we have a reference script that does this but in Oracle v7.3.4. We do want to include the automatic start/stop of dbconsole for accessing it via OEM.
View 1 Replies View RelatedI have a small problem with creating the SPFILE,
These are the commands i had issued :-
1. startup nomount
2. create SPFILE from PFILE ;
Then i got an error :-
ORA-01078: failure in processing system parameters
LRM-00109: could not open parameter file 'C:ORACLEORA92DATABASEINITORCL.ORA'
Ever since this happened i am unable to connect to ORACLE under any schema !
I get the following error : -
SQL> conn scott/tiger
ERROR:
ORA-01034: ORACLE not available
ORA-27101: shared memory realm does not exist
Warning: You are no longer connected to ORACLE.
WHY DOES THIS HAPPEN AND HOW CAN I OVERCOME IT ?
I have just migrated my database from oracle7 to Oracle9i. My application is still on forms 4.5 and reports 2.5.
i am having a problem after the migration. I am able to run my forms, but i cannot run my reports from my form (button). i am having the error : "frm-41211 integration error: SSL failure running another product". I want to mention that i am able to run the report from the report builder.
I have a form with a button for "Print Report " when I click button following error occurred :
FRM-41211 :integration error : SSL failure running another product
"Integration error: SSL failure running another product" with HP Deskjet D2680.We are using 10gR2, Forms6i, and Report6i. The server is Windows 2003 Server, and the OS of the printer is XPIn one of our module, upon calling one report we always encounter Integration error: SSL failure running another product. Sometimes when we do not encounter it, the spooling takes too much time and it takes 6minutes just to print the first page of the report, succeeding pages takes 2-3minutes in interval.
At first we thought that the memory of the PC is the problem, but we tried to connect it to a 2gig RAM Win7 laptop, another laptop with 1gig RAM XP, and a 1g RAM Desktop. We tested 5 computers but the same problem occurs.
The problem is not encountered after we tried other HP Printer(HP 3940, 6988, & D4360). I just want to know the problem with the HP Deskjet D2680.
I need to take the certain logs on my 3-Node, 10gR2 RAC with ASM on Solaris 10.I have been asked to shutdown the database, nodeapps, listener, asm and crs and then restart crs. Below are t steps that I have prepared.
CODE
====Enable trace=========
ENABLE LEVEL 5 tracing-
./crsctl debug log crs allcomp:5
====Stop database, asm, listener, nodeapps finally crs===
1. STOP DATABASE
srvctl stop database -d DB_NAME
[code]....