I need to write a script which will do tnsping to all the 6000 oracle databases my client have and I need to record the response of it for each database. What will be the best option to use with tnsping? SID of these databases or net_service_name?
We are going to upgrade our Oracle client on our clients to 11.2.0.3. But I can not record a resopnsfile with setup.exe. Have Oracle removed this feature?
Here's a dump from setup.exe
There is no possibility to run setup.exe witch -record -destinationfile option:
Preparing to launch Oracle Universal Installer from C:UsersTestAppDataLocal TempOraInstall2013-01-14_02-12-48PM. Please wait ... Usage: setup [-options] [(<CommandLineVariable=Value>)*]
Where options include:
-clusterware oracle.crs,<crs version>
Version of Cluster ready services installed.
-crsLocation <Path>
Used only for cluster installs, specifies the path to the crs home locat ion. Specifying this overrides CRS information obtained from central inventory.
-invPtrLoc <full path of oraInst.loc>
Unix only. To point to a different inventory location. The orainst.loc f ile contains: inventory_loc=<location of central inventory> inst_group=<>
-jreLoc <location>
Path where Java Runtime Environment is installed. OUI cannot be run with out it.
-logLevel <level>
To filter log messages that have a lesser priority level than <level>. V alid options are: severe, warning, info, config, fine, finer, finest, basic, gen eral, detailed, trace. The use of basic, general, detailed, trace is deprecated.
-paramFile <location of file>
Specify location of oraparam.ini file to be used by OUI.
-responseFile <Path>
Specifies the response file and path to use.
-attachHome
For attaching homes to the OUI inventory.
-cfs
Indicates that the Oracle home specified is on cluster file system (shared). This is mandatory when '-local' is specified so that Oracle Universal Installer can register the home appropriately into the inventory.
[code]....
Session/Installer variables are specified using:
[session:]varName=value Ex 1: session:ORACLE_HOME_NAME="OraHome" Ex 2: ORACLE_HOME_NAME="OraHome" The lookup order is session:varName then just varName. The session prefix is used to avoid ambiguity.
Component variables are specified using:
[compInternalName:[Version:]]varName Ex 1: oracle.comp1:1.0.1:varName="VarValue" Ex 2: oracle.comp1:varName="VarValue" The lookup order is compInternalName:Version:varName, then compInternalName: varName, then just varName.
I am familiar with using tnsping with the standard sqlnet.ora/tnsnames.ora or other oracle connection definition methods. Can I specify the actual connection definition on the tnsping command line? Something like:
I am doing an experimental setup of Siebel Servers in Linux . For this , i had installed Oracle 11gR2 x64 db in OEL 5.4 x64 , and created a db instance 'oracle'. But , i am not able to tnsping to the db (installed on the same machine).
PSB o/p..
[oracle@localhost ~]$ source oraenv ORACLE_SID = [oracle] ? The Oracle base for ORACLE_HOME=/home/oracle/app/oracle/product/11.2.0/dbhome_1 is /home/oracle/app/oracle
[Code].....
Had started up the db successfully using 'startup' command in the sql prompt.
We are using oracle 10.2.0.3.0 version on HP-UX B.11.23 U ia64.
We are facing a lot of delay in TNS ping reply. It is taking 8000+ msec.
$ tnsping XXXXXX 20
TNS Ping Utility for HPUX: Version 10.2.0.3.0 - Production on 27-FEB-2013 12:37:15
Copyright (c) 1997, 2006, Oracle. All rights reserved.
Used parameter files: $ORACLE_HOME/network/admin/sqlnet.ora
Used TNSNAMES adapter to resolve the alias Attempting to contact (DESCRIPTION = (ADDRESS_LIST = (ADDRESS = (PROTOCOL = TCP)(HOST = xxxxxx)(PORT = 1531))) (CONNECT_DATA = (SERVICE_NAME = xxxxxxx))) OK (1250 msec) OK (1150 msec) OK (860 msec) OK (860 msec) OK (790 msec) OK (810 msec) OK (790 msec) OK (570 msec) OK (650 msec) OK (630 msec) OK (790 msec) OK (1240 msec) OK (1090 msec) OK (1030 msec) OK (870 msec) OK (690 msec) OK (740 msec) OK (650 msec) OK (490 msec) OK (560 msec) $
I'm trying to install 2 nodes oracle RAC 11gR2 on SLES11. I configured DNS for public,virtual, private and scan IPs. when I check with nslookup, everything seems ok. but when I run runcluvfy.sh, it says that:
" PRVF-5636 : The DNS response time for an unreachable node exceeded 15000 ms on following nodes: rac1,rac2"
I am working on 10.2.0.4 oracle version database of my production,
when executed a simple drop command , the total time it took is 26 secs. on Avg. the table is holding only 20 records. this is happening for the last few weeks , prior to that it took less than 0 secs.
05:22:58 SQL> drop table C$_100GL_INTERFACE ;
Table dropped.
Elapsed: 00:00:26.67
but on successive executions the elapsed time falls to 10-15secs.
And on the same test env, we are achieving the expected results less than 0 secs.
My SQL Response Time is more ttan 100% and keeps on increasing. How can I fix this? The Application users are complaining that the system is very slow.
I am working on web services. im getting soap response and i need it to be, created as xls file.i have used DBMS_XSLPROCESSOR.CLOB2FILE it throws error while opening in excel. Is there any other way.
I need to create a DB on a pc with 4GB (RAM). I can use the assistant but where I need to set correctly a value related to the memory? Is it necessary to set values for best performances in response time?
I have a lot of problems in parsing SOAP web service response of Jasper The major problem is that the report document in the response appears at the end of the response. It appears even after the closing tag of the soap response. The images in the response are returned in binary form.
Because the response is partially binary and partially characters so I am not able to parse it correctly. If i make a web service call using APEX webservice references and then put the response in a collection then I get an error. I guess APEX collections are not able to handle this response. I say this because If I call the webservice using UTL_HTTP, then I get the response.
parsed a Jasper SOAP web service response which has a report in it.I have gone through h[URL]..but I am not using it.My question is focused on parsing the response and not on finding other ways of getting it
What should be our approach when we see the disk response time is bad for a particular tablespace in database.I heard a good disk response time should be on an average 10ms.
What are all the necessary steps in running a Windows OS .bat when a metric threshold has been tripped? Currently have a fully qualified path (C:scriptsRunthis.bat) entered in the Response Action column but no action is taken when threshold is reached.
1. Our business users had a requirement to approve or reject the Workflow Notification Emails form their Email account on MS Outlook Express. When they perform action from MS Outlook Express it sends email to wfmailer but no action perform in application. The notification inbox in application shows this notification as OPEN notification and the requested function also shows 'Waiting for Approval'.
2. I need to hide Request Information button/link from the email notification send through Workflow mailer to user. There are three actions button available in email notification Approve, Reject and Request Information. I need to have only two button Approve and Reject. How to hide Request Information button.
Background: The gateway could not receive a timely response from the website you are trying to access, a DNS server, or another gateway server. This might indicate that the network is congested or that the website is experiencing technical difficulties.
I have a question regarding db link. I have a query that uses a database link, i speed it up by adding the DRIVING_SITE hint and it worked when executed from
sql*plus or pl/sql developer.
It returns results in 3 seconds or even less. However, when i put this query back into the APEX application, specifically into an interactive report page -- it runs for 3 mins!
i need to consume web services within my apex Apps, i tried sample app from here: URL....it worked, but response time is about 15 seconds, then i tried another with Google Geocode APIURL.... and again time is 15-16 seconds. It's normal response time from Apex Web Services or is there something to do.
I wish to run a SQL query and measure elapsed time, then compare the values to other Oracle DBs from other companies. That will give me a feeling if our DB performs well.For example in UNIX world, you can create a random 4GB file to measure throughput I/O and compare the values (for example 4MB/sec).
What's the simplest way to compare DB response time from forum members to our own DB? I don't need 100% accurate numbers.
I am loading data file using SQL Loader in TOAD 10.5.1.3 in Oracle 10g using the control file below and loading data into 2 tables post1.thead and post1.tdetl. THEAD contains item level transaction and TDETL is detail level when a transaction has a discount or promo attached to for that item. When the
LOAD DATA APPEND INTO TABLE post1.thead WHEN (1:5) = 'THEAD' TRAILING NULLCOLS (file_type POSITION(1:5)CHAR,
[code]....
A particular THEAD value may have 0, 1 or many TDETL corresponding values.below is a sample data file. When the position 21 in the TTAIL has a value of 1 or 2, then we know that there is a promo or discount applicable to the ITEM (THEAD).
What I want to acheive is to accurately reflect a TDETL to its corresponding THEAD, as both THEAD and TDETL are loaded into separate tables. How can we have the 2 records correlated?
I have a table which contains the multiple records for single ID No. Now i have to select single record which contains the latest date. here is the structure Name
Null Type ------ ---- ------------ ID_P NUMBER NAME_P VARCHAR2(12) DATE_P TIMESTAMP(6) Records---------------------1 loosi 22-AUG-13 01.27.48.000000000 PM1 nammi 26-AUG-13 01.28.10.000000000 PM2 kk 22-AUG-13 01.28.26.000000000 PM2 thej 26-AUG-13 01.28.42.000000000 PM
now i have to select below 2 rows how can write select qurie for this?
I have a fairly standard Purchase Order form which contains pre-loaded data (been uploaded from an XML file).When the Purchase Order is processed, the form updates a Price History table only if the Price on the PO_Details changes.The code for updating the price history table is contained in a PRE_UPDATE trigger on the PO_Details Data Block.
No other data changes on the PO_Details table.I now want to change this so that the Price History table is updated even if the price does not change i.e I want to create a history record for each record on the PO_Details irrespective of whether it was updated or not.
Is there an alternative trigger that I can move my code to (ie move it from PRE_UPDATE) to some other trigger that is fired for each PO_Details record even if there is no change.
I need to create a query that returns record by record a field qty_progr with the cumulate qty considering previous records. The result should be the following: