i get while getting a report in ASP..
Error like this
Error Code 1460: Timeout
Background: The gateway could not receive a timely response from the website you are trying to access, a DNS server, or another gateway server. This might indicate that the network is congested or that the website is experiencing technical difficulties.
I need to create a DB on a pc with 4GB (RAM). I can use the assistant but where I need to set correctly a value related to the memory? Is it necessary to set values for best performances in response time?
View 2 Replies View RelatedWe are going to upgrade our Oracle client on our clients to 11.2.0.3. But I can not record a resopnsfile with setup.exe. Have Oracle removed this feature?
Here's a dump from setup.exe
There is no possibility to run setup.exe witch -record -destinationfile option:
Preparing to launch Oracle Universal Installer from C:UsersTestAppDataLocal
TempOraInstall2013-01-14_02-12-48PM. Please wait ... Usage:
setup [-options] [(<CommandLineVariable=Value>)*]
Where options include:
-clusterware oracle.crs,<crs version>
Version of Cluster ready services installed.
-crsLocation <Path>
Used only for cluster installs, specifies the path to the crs home locat ion. Specifying this overrides CRS information obtained from central inventory.
-invPtrLoc <full path of oraInst.loc>
Unix only. To point to a different inventory location. The orainst.loc f
ile contains:
inventory_loc=<location of central inventory>
inst_group=<>
-jreLoc <location>
Path where Java Runtime Environment is installed. OUI cannot be run with out it.
-logLevel <level>
To filter log messages that have a lesser priority level than <level>. V alid options are: severe, warning, info, config, fine, finer, finest, basic, gen eral, detailed, trace. The use of basic, general, detailed, trace is deprecated.
-paramFile <location of file>
Specify location of oraparam.ini file to be used by OUI.
-responseFile <Path>
Specifies the response file and path to use.
-attachHome
For attaching homes to the OUI inventory.
-cfs
Indicates that the Oracle home specified is on cluster file system (shared). This is mandatory when '-local' is specified so that Oracle Universal Installer can register the home appropriately into the inventory.
[code]....
Session/Installer variables are specified using:
[session:]varName=value
Ex 1: session:ORACLE_HOME_NAME="OraHome"
Ex 2: ORACLE_HOME_NAME="OraHome"
The lookup order is session:varName then just varName. The session prefix is
used to avoid ambiguity.
Component variables are specified using:
[compInternalName:[Version:]]varName
Ex 1: oracle.comp1:1.0.1:varName="VarValue"
Ex 2: oracle.comp1:varName="VarValue"
The lookup order is compInternalName:Version:varName, then compInternalName:
varName, then just varName.
I have a problem when trying to assign the value of a VARCHAR2 variable into a XMLType: ORA-1460 unimplemented or unreasonable conversion requested.
This is my
----------------------------------------------------------------
FUNCTION test(
xml_string IN VARCHAR2,
type IN VARCHAR2,
path_array IN VARCHAR2)
RETURN NUMBER AS
[code]....
The error happens at SELECT xmltype(xml_string) INTO sub_xml from dual;
I really don't understand what's exactly happening cause this code works for some cases but this happens a lot too cause my application handles a lot of information. The length of xml_string in that moment is 4119. Also the XML code I'm working with and I detected this one always goes wrong doesn't seem to have any errors.
i want data receive from COM PORT. it's is Possible.Forms 6i and Oracle 8i
View 1 Replies View RelatedDiscreet use of dbms_job.submit (to call a procedure), can be used to multi thread several instances of same proc in pl sql. I am able to do it.The problem is that dbms_output.put_line of the proc which is multi threaded does not reflects in the outer proc (the proc which parallels this proc and then waits for their completion).How do I receive the output?
View 3 Replies View Relatedi need to write a query in order to receive a new table.
select table_name,col1, null col2
from
(SELECT b.table_name, b.col1 col1, a.CountPrimaryKeys
from
(SELECT user_constraints.table_name,
COUNT(user_cons_columns.column_name) CountPrimaryKeys
[code].......
We have been using XLA to capture events on TimesTen for a while now without any issues. We were on TimesTen 7.0.5 and then moved to 11.2.2.3.0 and now 11.2.2.4.0. The XLA processes used Java 6 64 bit and works well with TimesTen versions 11.2.2.4.0 - 64 bit and 11.2.2.3.0 - 64 bit, without any issues.
However, we recently upgraded to Java 7 64 bit both during build time of our XLA processes as well during runtime. The problem we see now is that XLA process upon startup processes events for a while and then after that doesnt receive any events. The process doesn't throw any errors/exceptions. If we restart the XLA process, all the unprocessed events are received and then it behaves normally for a while after which it fails to receive any further events.
Is there any issue with Java 7 64 bit and the TimesTen XLA API? I read the TimesTen 11.2.2.4.0 manual and it says that Java 7 and the ttjdbc7.jar have been certified to work well. Was just wondering if there were any other issues.
In addition, to debug the problem, we ran XLA on a single node and on a two safe setup. The same observations are noted. On Java 6, the process runs just fine capturing all events without any issues, but with Java 7, the issues persist.
In addition, we are only performing updates/inserts on to TimesTen, no delete actions. The OS on which TimesTen's and XLA runs is Red Hat Enterprise Linux Server release 5.7 (Tikanga).
here is the situation, I have to write a function that receive as parameter a datatype varchar2 and validate if the letter is less than "A" or greater than "Z", it must print do not correct, or correct depending on the situation, no problem so far, the only problem I've got is: If the symbol is ";" is valid, but i do not know how to write it, It does not depend on the PL/SQl languaje but depends on the logic itself.
DECLARE
v_nombre varchar2(20):='john;%';
vv varchar2(1);
begin
for i in 1..length(v_nombre) loop
[code]...
I am trying to read a message from Oracle queue using OCCI.I am getting this run time error:
ORA-24550: signal received: [si_signo=11] [si_errno=0] [si_code=2] [si_int=-389971137] [si_ptr=0x34e8c1833f] [si_addr=0x615db0] Killed.I have checked for the line that is throwing error and found below line causing it:
*messageFromQueue = cons.receive(Message::RAW);
It seems like RECEIVE function is throwing this error: Here is my code:
void Cdatabase::connect(string user, string passwd, string db)
throw (SQLException)
{
env = Environment::createEnvironment(Environment::OBJECT);
conn = env->createConnection (user, passwd, db);
messageFromQueue = new Message(env);
}
[code]....
standby db /primary db in sync managed recovery working but
broker
show configuration
Connected.
DGMGRL> show configuration
Configuration - GenesisDR
Protection Mode: MaxAvailability
Databases:
orcl - Primary database
Warning: ORA-16629: database reports a different protection level from the protection mode
standby - Physical standby database
Error: ORA-16664: unable to receive the result from a database
Fast-Start Failover: DISABLED
Configuration Status:
ERROR
DGMGRL>
I have 11g RAC database in Solaris 10 - 64bit server. When i start messaging gateway agent in node1, it goes fine. But in node2, i am getting the following error.
java.lang.UnsatisfiedLinkError: /usr/app/oracle/product/11.1.0/lib/libocijdbc11.so: Can't load Sparc v9 64-bit .so on a Sparc 32-bit platform
I tried 467166.1 note but it didn't sort out the issue.
I am trying to understand on how ORACLE Continuous Query Notification works. I used the sample code from the ORACLE site:
//download.oracle.com/docs/cd/B28359_01/appdev.111/b28395/oci10new.htm#LNOCI13111
created employees and departments table under my schema.When I executed the sample code. I received an error
"ORA-24912: Listener thread failed. Failed to get IP address of host." that was generated from OCISubscriptionRegister.
Upon setting the client IP address through calling OCIAttrSet, the client can register successfully. I can see the registration entry in USER_ CHANGE_ NOTIFICATION_REGS.
I tried to trigger the notification by updating employee table as recommended. However, the client never received the notification.Is there a way to check if the server created notification and tried to send it out to the client?
I decided to configure our current standby databases for administration in EM 12c via the "Manage an existing standby database with Data Guard broker". The first one went off without issue but on the second I got "ORA-16664: unable to receive the result from a database". I've scoured through everything and confirmed, more than once, that the tnsnames, listener and pwfile are all good to go. I can tnsping everything from both servers. The sby1 database is functioning fine and all log files are being transported and applied without issue from primary to standby, on different servers. I can connect via sqlplus to each database from opposite servers. I don't understand how I can do the below in DGMGRL:The listener doesn't not know of service requested (PRI1) and is unreachable in the first connect, but then I can turn around and successfully connect to PRI1 without issue?
DGMGRL> connect sys@sby1Password:Connected.DGMGRL> show configuration; Configuration - PRI1_ora-9002.xxxx Protection Mode: MaxPerformance Databases: PRI1 - Primary database sby1 - Physical standby database Fast-Start Failover: DISABLED Configuration Status:ORA-12514: TNS:listener does not currently know of service requested in connect descriptorORA-16625: cannot reach database "PRI1"DGM-17017: unable to determine configuration status DGMGRL> connect sys@pri1Password:Connected.DGMGRL> show configuration Configuration - PRI1_ora-9002.xxxx Protection Mode: MaxPerformance Databases: PRI1 - Primary database sby1 - Physical standby database Error: ORA-16664: unable to receive the result from a database Fast-Start Failover: DISABLED Configuration Status:ERROR DGMGRL> ;
My setup is following:
CODEhost22 (Oracle Linux 5.9) | host30 (Windows XP) with SQL Server Express 2008
DB22 | Gateway to MSSQL | DB30
Local Local | |
Capture --> Apply ------> Gateway -----------------> DUMMYUSR.DUMMYTBL
Process Process | |
Capture process on DB22 captures changes made to local DUMMYUSR.DUMMYTBL table, enqueues it to capture queue and propagates to apply queue for local apply process, which, using database link DB30 supposed to apply these changes to table DUMMYUSR.DUMMYTBL on remote SQL Server database DB30.
The problem is that when apply process is executing transaction, it aborts with error:
QUOTE ORA-26713: remote object does not exists or is inaccessible.
ORA-26712: remote object is "DUMMYUSR"."DUMMYTBL"@"DB30".
In trace log I can see the following message:
QUOTE kniNoPrimaryKeyError: ORA-26713, remote obj doesn't exist,
DUMMYUSR.DUMMYTBL@DB30
[code]...
what can cause ORA-26713 error of apply process applying changes to SQL Server database through Oracle Database Gateway, if object to be modifyed exists and accessible from Oracle database for strmadmin user?
By the way, database link and tables were created with following commands: CODEDB22(Oracle): (connected as strmadmin) create database link DB30 connect to "dummyusr" identified by "dummypwd" using 'DB30';
DB22(Oracle): (connected as dummyusr)
create table DUMMYTBL (no number, name char(6), ddate date, payload varchar2(2013));
DB30(MSSQL): (connected as dummyusr)
create schema DUMMYUSR authorization dummyusr;
create table DUMMYUSR.DUMMYTBL (no float(53), name char(6), ddate datetime2(0), payload varchar(2013));
I want to connect ORACLE-11gR2 that is on linux with an MS sql server. DO i need to use some third party drivers like easy soft ? Can i configure the database gateway without any third party drivers ?
Secondly if my oracle is on linux, can i configure the gateway on a seperate windows machine(that will connect to linux oracle and ms sql server) as i have found the gateway installation setup only for windows version.
I have one procedure which calls a function. My requirement is if that function didnt return value in 1 minute then stop the exection of that function and call next statement.
Begin
(1).........
(2).......
(3) get_func_val:= function(1,2);
(4)......
(5)....
end;
My requirement is, if (3) doesn't return value in 1 minute, stop the execution of (3) and start executing (4).
I'm trying to connect from Oracle 11g (11.2.0.1.0) to Sybase Adaptive Server Anywhere (9.0.2.3527). My Oracle environment is running on Linux Centos 5.3, the sybase database runs on a Windows Server.
All my attempts have failed so far - both through Oracle Database Gateway for Sybase and via Oracle Database Gateway for ODBC in combination with freeTDS. Using either way I'm ending up with apparently the same error:
ASA Error -611: Transact-SQL feature not supported
When I use db link created via dg4sybs (Oracle Database Gateway for Sybase) I get this:
SQL> SELECT * FROM aaa@hvx;
SELECT * FROM aaa@hvx
*
ERROR at line 1:
ORA-28500: connection from ORACLE to a non-Oracle system returned this message:
[code]....
When I use db link created via dg4odbc (Oracle Database Gateway for ODBC) and freeTDS driver I get this:
SQL> SELECT * FROM aaa@hvx1;
SELECT * FROM aaa@hvx1
*
ERROR at line 1:
ORA-28511: lost RPC connection to heterogeneous remote agent using
SID=ORA-28511: lost RPC connection to heterogeneous remote agent using
[code]....
It seems both drivers use Transact-SQL instructions which are then denied by ASA. I'm not familiar with Sybase products at all, but as far as what my googling revealed the Transact-SQL is only supported in Adaptive Server Enterprise (enterprise-class version of Sybase's database). I couldn't figure out if there's a way how to disable Transact-SQL in the driver configuration. how to connect from Oracle (10g or 11g) to Sybase Adaptive Server Anywhere?
I have trouble reading a field called "Description" from a SQL Server 2008 DB using the gateway:
SQL> select "Description"
from opportunity@mscrm
select "Description"
from opportunity@mscrm
*
Error at line 1
ORA-00904: "Description": ungültiger Bezeichner
My first thought was, that "Description" was a reserved word in Oracle but it's not:
SQL> create table delete_this ("Description" varchar2 (50 char))
Table created.
SQL> select "Description" from delete_this
no rows selected.
So everythings fine here. Then I thought, that I might have mispelled the column name, but no:
SQL> select column_name
from v_mscrm_tab_columns
where table_name = 'opportunity'
and column_name like 'Desc%'
[code]....
We are planning on interfacing Oracle to SQL server connectivity, I'm researching on how to create a dblink to SQL server 2005. I'm a little confused between Generic connectivity and Transparent Gateways..
I think Transparent Gateway is not free and needs to be licensed, is it better in terms of performance? Also, do I need to configure this gateway on a seperate server?
I think Generic connectivity can be configured on the same Oracle database server itself.. but I see there could be some performance issues with it..
We are running on Oracle 10.2, looks like HSODBC is not available in 10g?
where can i download the oracle gateway for sql server? i can't find the download web site .
View 4 Replies View Relatedwe have microsoft sql server, oracle gateway server (11G) and database server (10.2.0.5) we already make the full setup, and it's working.
we create materialized view into oracle server to read a data from sql server, but the refresh of MV take long time so we are planing to create the materialized view into oracle gateway server.
create MV into oracle gateway server?i mean i don't want to download oracle database instance for only one MV.
Oracle 11gR2
Linux 6.x
Sybase 12 (on Windows)
unixODBC 3.2.x
Sybase Client 12
------------------------
Given the following files or structures that are important to the proper operation of the ODBC Gateway connecting to a remote Sybase database:
listener.ora
tnsnames.ora
initmydblink.ora ( my version of the initdg4odbc.ini )
dblink (not a file but the dblink in the Oracle database)
odbc.ini
odbcinst.ini
What files (and what properties within those files) may/must be changed if the remote Sybase db and system is different (i.e. the Sybase database source has been changed to something 'new')? For example, I can that the odbc.ini file is going to have to be alterer to point to the new database server IP address, database port, database name?
What are the pro's and con's to using the APEX Listener vs the Embedded PL/SQL gateway?
We just started using APEX and on a development server, we set it up using the EPG because this seemed like the easier thing to do. However, they now have a couple apps that are approaching production status and I now need to look at placing the APEX runtime on our production Oracle Database server. So I am trying to decide if I should continue using the EPG or if I should use the APEX Listener.
The server is Windows Server 2008 Enterprise R2 (64 Bit) with Oracle 11g R2 (11.2.0.3.0) also running at 64 bit. I am planning on using APEX 4.2.1.
I have also not found information about how to move APEX application from development to production. Do I export the schema from the dev server and import it to the production server? Do I have to recreate the same workspace name on the production server as well?
use a separate dev and production server setup for APEX?
is there any way to reduce the dblink timeout, i need to test if the remote server is up by testing the dblink throw 'select 1 from dual@link_name' but it take too long time 5-6 min., i need to make it 5 sec after that the exception tns timeout appear. I try with some sqlnet.ora parameters like INBOUND_ TIMEOUT but not work for me, also i try using tnsping but it also take long time when the remote server is down.
View 2 Replies View Related[#|2010-03-17T19:00:26.689+0530|SEVERE|glassfishv3.0|tcplistener.ModuleHandler|_ThreadID=30;_ThreadName=Thread-1;|The log message is null.
java.net.SocketException: Connection reset
at java.net.SocketInputStream.read(SocketInputStream.java:168)
at java.net.SocketInputStream.read(SocketInputStream.java:182)
at java.io.FilterInputStream.read(FilterInputStream.java:66)
at tcplistener.ByteWrapper.unwrapFromStream(ByteWrapper.java:136)
at tcplistener.ModuleHandler.run(ModuleHandler.java:106)
at java.lang.Thread.run(Thread.java:619)
|#]
[code].....
how can i run dml statement on the oracle transparent gateway for sql server ,such as insert ,update,delete.
View 4 Replies View RelatedIs there any way to control the timeout before connecting via dblink. the idea is to test the dblink before calling functions over it, the problem it when i try 'select 1 from dual@dblink' in case if the remote server is down it takes too long time 5-7 min. which causing hang up the session,
So is there any parameter to reduce the waiting time say after 3 sec stop and return the timeout exception.I try the SQLNET.INBOUND_CONNECT_TIMEOUT parameter but not working, also try the tnsping but it alse take long time when the server down.
the database version is 10gr2.
When I connect to a Oracle database(remote) using TOAD client, because of the settings of timeout done at the server end(in Oracle), the TOAD session gets time out in 5 minutes.
I want to know how I can increase the timeout interval or if I can keep on pinging the database server so that the TOAD connection does not gets timeout?
PS: When we connect to a unix server using putty, we can keep on pining the server at regular timeout interval by going to Change Settings->Connection->Set KeepAlive
Is there a similar way for TOAD?
Is there any timeout for sql queries in oracle, if so what is the timeout parameter.
View 3 Replies View Related