Discreet use of dbms_job.submit (to call a procedure), can be used to multi thread several instances of same proc in pl sql. I am able to do it.The problem is that dbms_output.put_line of the proc which is multi threaded does not reflects in the outer proc (the proc which parallels this proc and then waits for their completion).How do I receive the output?
View 3 Replies
I'm using dbms_metadata.get_ddl inside a package and I have a problem: if I execute the package directly, like "exec pkg_util.read_ddl('TA_DL_IDP', 'RMI_KUNDE') it works fine.
If I submit the same procedure using DBMS_JOB.SUBMIT, I get an error: Err_ -31603 - MSG: ORA-31603: object "RMI_KUNDE" of type TABLE not found in schema "TA_DL_IDP"
I know that in order to use dbms_metadata.get_ddl I need to have SELECT_CATALOG_ROLE and I know about the necessity to give explicit grants to objects rather than using roles when running pl/sql code from inside a package, but this is different: the different behavior is between running the same package in foreground and submitting it using DBMS_JOB.SUBMIT.
'Can we pass a dynamic collection variable to the procedure that is called from dbms_job.submit'
I have a package my_package with:
1. record type: ocv_rec
2. collection type: varr_ocv_rec varray(100) of ocv_rec
3. record type: ext_id_rec
4. collection type: varr_ext_id_rec table of ext_id_rec index by pls_integer
5. procedure: analyze_error_152_ll
6. procedure: get_ext_ids_152(
v_db_ssa_dtl in varr_ocv_rec,
ext_id_type in varchar2,
ext_ids out varr_ext_id_rec)
Now here is where the issue resides:Within the definition of analyze_error_152_ll (in body of my_package), I call get_ext_ids_152 using dbms_job.submit
procedure analyze_error_152_ll
is
vJob varchar2(400);
vJobNum binary_integer;
v_db_ssa_dtl2 varr_ocv_rec := varr_ocv_rec();
ext_ids varr_ext_id_rec;
ext_id_type varchar2(5) := '(1)';
/*OTHER DECLARATONS*/
[code]......
i want data receive from COM PORT. it's is Possible.Forms 6i and Oracle 8i
View 1 Replies View Relatedi need to write a query in order to receive a new table.
select table_name,col1, null col2
from
(SELECT b.table_name, b.col1 col1, a.CountPrimaryKeys
from
(SELECT user_constraints.table_name,
COUNT(user_cons_columns.column_name) CountPrimaryKeys
[code].......
We have been using XLA to capture events on TimesTen for a while now without any issues. We were on TimesTen 7.0.5 and then moved to 11.2.2.3.0 and now 11.2.2.4.0. The XLA processes used Java 6 64 bit and works well with TimesTen versions 11.2.2.4.0 - 64 bit and 11.2.2.3.0 - 64 bit, without any issues.
However, we recently upgraded to Java 7 64 bit both during build time of our XLA processes as well during runtime. The problem we see now is that XLA process upon startup processes events for a while and then after that doesnt receive any events. The process doesn't throw any errors/exceptions. If we restart the XLA process, all the unprocessed events are received and then it behaves normally for a while after which it fails to receive any further events.
Is there any issue with Java 7 64 bit and the TimesTen XLA API? I read the TimesTen 11.2.2.4.0 manual and it says that Java 7 and the ttjdbc7.jar have been certified to work well. Was just wondering if there were any other issues.
In addition, to debug the problem, we ran XLA on a single node and on a two safe setup. The same observations are noted. On Java 6, the process runs just fine capturing all events without any issues, but with Java 7, the issues persist.
In addition, we are only performing updates/inserts on to TimesTen, no delete actions. The OS on which TimesTen's and XLA runs is Red Hat Enterprise Linux Server release 5.7 (Tikanga).
here is the situation, I have to write a function that receive as parameter a datatype varchar2 and validate if the letter is less than "A" or greater than "Z", it must print do not correct, or correct depending on the situation, no problem so far, the only problem I've got is: If the symbol is ";" is valid, but i do not know how to write it, It does not depend on the PL/SQl languaje but depends on the logic itself.
DECLARE
v_nombre varchar2(20):='john;%';
vv varchar2(1);
begin
for i in 1..length(v_nombre) loop
[code]...
I am trying to read a message from Oracle queue using OCCI.I am getting this run time error:
ORA-24550: signal received: [si_signo=11] [si_errno=0] [si_code=2] [si_int=-389971137] [si_ptr=0x34e8c1833f] [si_addr=0x615db0] Killed.I have checked for the line that is throwing error and found below line causing it:
*messageFromQueue = cons.receive(Message::RAW);
It seems like RECEIVE function is throwing this error: Here is my code:
void Cdatabase::connect(string user, string passwd, string db)
throw (SQLException)
{
env = Environment::createEnvironment(Environment::OBJECT);
conn = env->createConnection (user, passwd, db);
messageFromQueue = new Message(env);
}
[code]....
standby db /primary db in sync managed recovery working but
broker
show configuration
Connected.
DGMGRL> show configuration
Configuration - GenesisDR
Protection Mode: MaxAvailability
Databases:
orcl - Primary database
Warning: ORA-16629: database reports a different protection level from the protection mode
standby - Physical standby database
Error: ORA-16664: unable to receive the result from a database
Fast-Start Failover: DISABLED
Configuration Status:
ERROR
DGMGRL>
I am trying to understand on how ORACLE Continuous Query Notification works. I used the sample code from the ORACLE site:
//download.oracle.com/docs/cd/B28359_01/appdev.111/b28395/oci10new.htm#LNOCI13111
created employees and departments table under my schema.When I executed the sample code. I received an error
"ORA-24912: Listener thread failed. Failed to get IP address of host." that was generated from OCISubscriptionRegister.
Upon setting the client IP address through calling OCIAttrSet, the client can register successfully. I can see the registration entry in USER_ CHANGE_ NOTIFICATION_REGS.
I tried to trigger the notification by updating employee table as recommended. However, the client never received the notification.Is there a way to check if the server created notification and tried to send it out to the client?
i get while getting a report in ASP..
Error like this
Error Code 1460: Timeout
Background: The gateway could not receive a timely response from the website you are trying to access, a DNS server, or another gateway server. This might indicate that the network is congested or that the website is experiencing technical difficulties.
I decided to configure our current standby databases for administration in EM 12c via the "Manage an existing standby database with Data Guard broker". The first one went off without issue but on the second I got "ORA-16664: unable to receive the result from a database". I've scoured through everything and confirmed, more than once, that the tnsnames, listener and pwfile are all good to go. I can tnsping everything from both servers. The sby1 database is functioning fine and all log files are being transported and applied without issue from primary to standby, on different servers. I can connect via sqlplus to each database from opposite servers. I don't understand how I can do the below in DGMGRL:The listener doesn't not know of service requested (PRI1) and is unreachable in the first connect, but then I can turn around and successfully connect to PRI1 without issue?
DGMGRL> connect sys@sby1Password:Connected.DGMGRL> show configuration; Configuration - PRI1_ora-9002.xxxx Protection Mode: MaxPerformance Databases: PRI1 - Primary database sby1 - Physical standby database Fast-Start Failover: DISABLED Configuration Status:ORA-12514: TNS:listener does not currently know of service requested in connect descriptorORA-16625: cannot reach database "PRI1"DGM-17017: unable to determine configuration status DGMGRL> connect sys@pri1Password:Connected.DGMGRL> show configuration Configuration - PRI1_ora-9002.xxxx Protection Mode: MaxPerformance Databases: PRI1 - Primary database sby1 - Physical standby database Error: ORA-16664: unable to receive the result from a database Fast-Start Failover: DISABLED Configuration Status:ERROR DGMGRL> ;
How to extract DDL of DBMS_JOB in sqlplus ?
View 30 Replies View RelatedI've defined DBMS_JOB in Oracle it is not starting on time. As per query it should start at 09:00 PM as given below.
SQL> SELECT TRUNC(SYSDATE) + 21/24 FROM DUAL;
TRUNC(SYSDATE)+21/24
--------------------
7/31/2012 9:00:00 PM
But instead it was started on 7/31/2012 1:14:10 AM. Which is wrong.
Following is script which I am using to submit this job.
DECLARE
X NUMBER;
BEGIN
[Code]....
I have total 8 procedure to run in parallel . and after that my 9th procedure should run.
below is my job submission procedure
create or replace procedure DURATION_ALARM_WEEKLY as
l_job number ;
begin
dbms_job.submit(l_job,'begin ALARMS_WEEKLY_CALL_OUT ; end;');
dbms_job.submit(l_job,'begin ALARMS_WEEKLY_CALL_IN ; end;');
dbms_job.submit(l_job,'begin ALARMS_WEEKLY_DURATIN_OUT ; end;');
[code].......
what is the syntax I have to do in my FINALE procedure . using DBMS_ALERT.REGISTER , DBMS_ALERT.WAITANY .....?
We have Data Migration for our application coded in PL/SQL. The DB server has 64 Cores available (Solaris 10 OS) however running the migration code written as a function, utilizes very little CPU and CPU utilization is to max 2%. To utilize CPU power available to increase the speed of migration, we are using DBMS_JOB to schedule this function multiple times.
However scheduling the function 10 times, we are seeing that at any moment only 4/5 oracle processes are active and utilizing the CPU and CPU utilization has gone up to 5-6%. The speed of migration is increased but not to a great extend which I feel would work if we could utilize more CPU.
I see a parameter job_queue_processes is set to 10 currently in the database and am planning to increase this (currently to 25 as I don't have exact count of how many other jobs may be running in the database).
I have to change the execution of a job, I have the sys access.The job is in another user, say scott.how to use dbms_change using sys account to change the execution of a job in Scott user..
View 9 Replies View RelatedWhat is the maximum number of failures a job can allow,when we are scheduling jobs using DBMS_JOB.
View 1 Replies View Relatedhow to enable dbms_job to run on every day at 4am excluding Fridays.
View 7 Replies View RelatedWe have a bunch of jobs scheduled using DBMS_JOB (yes, I know I should be using DBMS_SCHEDULER, but we haven't migrated there yet). We are running Oracle 11.2.0.3 on Windows Server 2003 x64.
For example, we have a job that is supposed to run every Wednesday at 20:00. The Interval we have set up is "NEXT_ DAY (TRUNC(SYSDATE), 'WEDNESDAY')+20/24". This has been working as intended. Today (Monday), however, the job kicked off at 11:52. It was the wrong day and the wrong time.
I don't see anything weird in my alert log. Where else should I check to figure out why this job ran today?
JOB LAST_DATE LAST_SEC NEXT_DATE NEXT_SEC INTERVAL WHAT
293 1/7/2013 11:52:46 AM 11:52:46 1/9/2013 8:00:00 PM 20:00:00 NEXT_DAY(TRUNC(SYSDATE), 'WEDNESDAY')+20/24 ACQUISITIONS.WORKLOAD_STATUS_UPDATE_NOTIF;
DECLARE
JOBSFILE UTL_FILE.FILE_TYPE;
-- TAKE ALL JOB TITLES FROM JOBS
CURSOR JOBSCUR IS
SELECT *
-- DDOCNAME,DDOCTITLE,DSECURITYGROUP,DDOCAUTHOR,DDOCTYPE,DINDATE,PRIMARYFILE,EXTRACTIONDATE,BATCH_ID
FROM TARGET_UCM ;
[code].......
this is my plsql here to print table values i am using many utl_file.put_line statements is there any way to print all table values in a single utl_file.put_line.
My requirement is I have placed a check Box in the Detailed Block and i have assigned values for the check box as
Checked - R
Unchecked - P
Initial Value - R
by default the check box would be displayed as Checked while inserting the values in to table the value of check box is not getting inserted but when the check box is unchecked the the value is getting inserted as P when the submit button is pressed.
My current system have 1 submit button with single form. This submit button will call *file_content.upload*.
htp.p('function on_submit() {');
htp.p('...the rest of my code here..');
htp.p('document.forms[0].submit();');
htp.p('return true;');
htp.p('}');
htp.p('<form enctype="multipart/form-data" method="post" action="file_content.upload">');
htp.p('...the rest of my code here..');
htp.p('<input type="button" id="btn_Submit" value="Submit" onclick="on_submit()"></form>');
My question is, i want to enhance this by adding additional 1 submit button with value "Save". But this new "Save" button will call/trigger different file. This new button will call *file_content.update*. How to accomplish this and how to differentiate these 2 button?
htp.p('<input type="button" id="btn_Submit" value="Submit" onclick="on_submit()">
<input type="button" id="btn_Save" value="Save"></form>');
I'm using the below code in SQL Developer, trying to submit a request:
Declare
vRequest_id NUMBER;
BEGIN
Fnd_Global.apps_initialize(9205,20639,200);
[code]...
However, when i check the fnd_concurent_request table, nothing is there.as I just used the following code in SQL Developer and it worked:
Declare
L_NUMBER number;
BEGIN
L_NUMBER := WF_ROLE_HIERARCHY.AddRelationship('UMX|XXR|GLFSA_RADG_BA','FND_RESP|SQLAP|XXR_GL_JNL_ADMIN|STANDARD');
END;
Is it due to the different types of packages im using? i.e. public/private? or is there an api i can use in SQL Developer to submit the request?
I am using Oracle Application Express 11g
I don't have a option for "Page item to submit" in Chart Region
I am new in apex i create form with report when i create record it submit page to its report its ok but can i change page on condition base.
View 8 Replies View Relatedi m using apex 4.1, and want to submit page when page load. i tried dynamic action but it continuously refreshing page. is there any other javascript or anything else from which i submit page on load
dynamic action used, event on load and action submit page but it continuously submitting page.
I have an updateable report based on a collection.
One of the columns is a radio group and is the only updateable column
My code for the column is currently
apex_item.radiogroup(7,seq_id,c008)
I also have a button that fires an update process.
Ideally, I would like to get rid of the button and fire the update, after the user has changed the radio group.
So I changed my code to
apex_item.radiogroup(
7
, seq_id
, c008
, null
, null
, null
, 'doSubmit(''SUBMIT'')'
, null
, null
, null)
If I click on a different radio group nothing happens.
If I then click on another one, the update fires, but with the value of the previous radio.
Do I need to add something else to
'doSubmit(''SUBMIT'')'
Is there any way to find the last run duration of a job which was scheduled using DBMS_JOB?
View 3 Replies View Relatedwe had one problem one of oracle job scheduled using dbms_job was inactive for so long time,As one of our developer noticed this and reached me as i checked the dba_job was running without an process
SQL> select sid,serial#,paddr from gv$session where osuser='oracle';
SID SERIAL# PADDR
---------- ---------- ----------------
626 753
i suggested a developer to drop job and reschedule it,now question was raised from them why process was not allocated to job.
