SQL & PL/SQL :: DBMS_JOB / Maximum Number Of Failures A Job Can Allow
Mar 9, 2010What is the maximum number of failures a job can allow,when we are scheduling jobs using DBMS_JOB.
View 1 RepliesWhat is the maximum number of failures a job can allow,when we are scheduling jobs using DBMS_JOB.
View 1 RepliesI gone through many forums and found that the number of voting disks should be always in odd number. Then why the maximum number of voting disk is 32?
View 1 Replies View Relatedhow do I count a list of number value eg 1,1,1,1,3,3,6,4 and find the one with maximum number which is 1
View 5 Replies View RelatedHow many maximum number of bind variables,can we use in Execute Immediate.
View 2 Replies View Relatedselect * from v$version;
BANNER
--------------------------------------------------------------------------------
Oracle Database 11g Enterprise Edition Release 11.2.0.2.0 - 64bit Production
PL/SQL Release 11.2.0.2.0 - Production
CORE 11.2.0.2.0 Production
TNS for IBM/AIX RISC System/6000: Version 11.2.0.2.0 - Production
NLSRTL Version 11.2.0.2.0 - ProductionI got below error on the datases.
ORA-00020: maximum number of processesBased on the suggestion got from previous posts, I did kill some (LOCAL=NO) processes to get myself in. When I looked at the number of processes the number is 150, I changed it to 1000. After a day I got the same error.
ORA-00020: maximum number of processes (1000) exceededI killed processes again to let my self in, bases on the post below, I queried database
ORA-00020: maximum number of processes (%s) exceededHere is the query to find out if there are any processes with out session attached to it.
select spid from v$process where addr not in (select paddr from v$session);Result
SPID
null
35259840
36897866
13369762
[Code]...
To determine the from where greatest number of processes originated
SELECT MACHINE, COUNT(*) FROM V$SESSION GROUP BY MACHINE;Machine Count(*)
2
CAPITAL-D3F0092 1
DQAKDCDKLCSW01 14
desmond 20
DQAKDCDKLCSA01 52
My question is why I am keep getting this? Why do increasing process from 150 to 1000 did not resolve the issue?
What can I do to make sure that I don't get this error again?
i got this error..
ORA-00020: maximum number of processes (1100) exceeded
my oracle version is 10.2.0.2.0
when i was trying to login to oracle i got :ERROR at line 1: ORA-01012: not logged on
lucky i was having another sqlplus login ..
wht i should do to bring the number of process down without increasing the process value and shuting/restaring down db.
"Usually, when this happens, I want to get connected to the instance, so that I can try to figure out which user is causing the problem. One way to do that is to use the 'ps' command to identify some of the oldest server processes, and kill the 3-5 oldest processes, and then quickly try connecting to the database. Once you're in, you can look at things like V$SESSION to try and determine which user(s) is (are) consuming so many connections, and then go from there."
this is what i got from [URL]....
1.if i am giving ps -ef in OS it will give lot of detail ...
2. in v$session wht i should look for ....
I need to get the maximum value of the VALUE field of each record with different POINTNUMBER, then do an update on the 2nd table.
table 1
UTCTime TIMESTAMP (6)
INTEGER POINTNUMBER
FLOAT VALUE (126)
INTEGER TLQ
table 2 (idem structure)
UTCTime TIMESTAMP (6)
INTEGER POINTNUMBER
FLOAT VALUE (126)
INTEGER TLQ
Where POINTNUMBER is six thousand different values My query only returns me the maximum of a single record:
SELECT * FROM table1 WHERE value = (SELECT MAX (value) FROM table2);
And the update:
UPDATE table2 SET to a.value = (SELECT MAX (b.value) FROM table2 b);
so does on a single record.That needed to maximize each pointnumber different? I can use a cursor to do this easier?
Insertion should first make a one-time, and then updates every 1 hour
I don't know if there is a beginner forum out there for PL SQL, but I cannot find one.I just started taking an Intermediate Oracle course to learn PL SQL. Today is my first day and I just installed Oracle 11g. I was in SQL Plus, tried the edit command. I got the message "wrote file Afiedt.buf" and then it was just a flashing cursor in the line below. I could not type any commands. I just hit the X to close the program.
What could I have done to exit the program with that flashing cursor since I was unable to type anything?
How can we dynamically get maximum value permitted in a number column? Is there any in-built function in oracle for this?
e.g. Accrued_Interest NUMBER(10,4)
In this case maximum value that can be inserted in this column is "999999.9999".
I am using Oracle 11g R2. (11.2.0.3)
I know that in the profiles of the user I can set limit for the number of sessions per database user, using the below command:
alter profile <profile_name> limit sessions_per_user=<required_number>;
I need to set maximum number of processes for the application user so in case they opened too many number of processes on the database they do not block the automated jobs to be run.My questions:
1. set a limit on sessions_per_user is it the same as a limit on processes? 1 proccess= 1 session ? Is there any way to limit the number of processes (not sessions) for a database user?
2. I am using RAC so the number of sessions is per the whole database, while the max number of processes is by instance (not database), so even I set a limit on the number of sessions (above the limit of processes for one of the instances) one instance may face ORA-20 errors, while the max number of sessions did not hit the limit. is there any workaround for this case?
I read the error description. In my case there is only one full backup at a time running, hence it does not make any sense.
RMAN>
connected to target database: OTATEST (DBID=3130218754)
RMAN-06900: WARNING: unable to generate V$RMAN_STATUS or V$RMAN_OUTPUT row
RMAN-06901: WARNING: disabling update of the V$RMAN_STATUS and V$RMAN_OUTPUT row
s
ORACLE error from target database:
ORA-19921: maximum number of 128 rows exceeded
SQL> select count(*) from V$RMAN_STATUS;
COUNT(*)
----------
560
SQL> select count(*) from V$RMAN_OUTPUT;
COUNT(*)
----------
32834
how many maximum connection, a particular user can have in oracle. and how many maximum connection if user has 'resource profile' as default.and i am using oracle 11.2.0.1.0
View 1 Replies View RelatedIve just tried running a simple
update BASIC set 'column name' = NULL
Which works fine if i specify a where clause that returns a low amount of values, but im trying to run this update for the whole column (1000's or records).
Ive had no experience of this error before and am unsure of where to start, ive had a quick read around but see something of removing triggers?
The full error is :
ORA-00036: maximum number of recursive SQL levels (50) exceeded
ORA-06512: at "new.su_Table", line 61
if there is any inbuilt function or way to find a row in the table that is having value for maximum number of columns.
For example, the table A has 5 columns
(c1,c2,c3,c4,c5) and it has 3 records(r1,r2,r3)
and
r1 has values only for c1,c2
r2 has values only for c1,c2,c3,c4
r3 has values only for c1
so I should get the result as "r3 has values for 4 columns & it is not having value for column c5".
I have getting error will insert into table i.e
i have a trigger as below
create or replace trigger INS_ERRORS
before insert on MIG_STG_ERRORS
for each ROW
declare
V VARCHAR2(22);
[code]........
when i insert into MIG_STG_ERRORS getting error message like 00036. 00000 - "maximum number of recursive SQL levels (%s) exceeded"
*Cause: An attempt was made to go more than the specified number of recursive SQL levels.
*Action: Remove the recursive SQL, possibly a recursive trigger.
To investigate further on this error ,i want to find how many user connections got established during the error time and their details like machine,username,program,status etc in database ?
View 6 Replies View RelatedIn Report it is possible to set the maximum rows to fetch to be a number e.g. 1+.Is it possible to use a number that is selected from another query? When I try to do this i.e. I put in the field num_lines or :num_lines I just get invalid number
View 10 Replies View Relatedi am getting ORA-00059:maximum number of DB_FILES exceeded, so i used following on one node
SQL> alter system set db_files=700 scope=spfile; system altered.
now do i need to re-bounce(restart) the db.
we are using database 11g.
Oracle Database 11g Enterprise Edition Release 11.2.0.2.0 - 64bit Production
i am getting one error while selecting the data from table.
SELECT interco_type, entity, chapter_entity, tran_currency, source_id_entity,
tran_id_entity, mirror_id, gaap_type, counterpart
FROM t_gri_reconid_dtl_agg_gcr;
or
select * from t_gri_reconid_dtl_agg_gcr where rownum = 1 ;
Error:- ORA-01795: maximum number of expression in a list is 1000 ( error is same in both the case )
From front end the user will enter VACANCY_ID in the label box and once he saves that transaction, in background VACANCY_CD filed(sequence) willautomatically generated
.below is my code:{code}create table tmp1(vac_id number,vac_cd number);create sequence tmp1_seq MINVALUE 1 MAXVALUE 9999999999999999999999999999 INCREMENT BY 1 START WITH 1 CACHE 20 NOORDER NOCYCLE ;select tmp1_seq.nextval from dual; ---initiating seqselect tmp1_seq.currval from dual; --checking the current val--trigger creationCREATE OR REPLACE TRIGGER TRIGGER1 AFTER INSERT ON TMP1 FOR EACH ROW DECLARE seqval
[code]...
Error: ORA-00036: maximum number of recursive SQL levels (50) exceededORA-00036: maximum number of recursive SQL levels (50) exceeded
In our development database, we have created 5 dimensions and a cube with 2 measures in OLAP. All these are mapped to relational tables. When we try to load this cube (MAINTAIN CUBE option from AWM) we are getting this below error:
An error has occurred on the server
Error class: Express Failure
Server error descriptions:
INI: error creating a definition manager, Generic at TxsOqConnection::generic<BuildProcess>
INI: XOQ-01600: OLAP DML error "ORA-35571: The maximum number of load errors has occured." while executing DML
[code].....
What are the database parameter i should look for as a DBA ?
Oracle 11g R2 on WIndows 20o8 R2 Standard edition
I have a test server that keeps running into ORA-00020: maximum number of processes error each night. Our current setting is '600' processes to be allowed. There are no users to this database except myself. No front end app connects to it either.
I found that ORACLE.EXE (SHAD) process coming from SYSMAN user is the one eating up all the processes and eventually causing that error.
From v$session, the program is OMS.
From v$process, the hostname is the server itself.
I narrowed it down to restarting the ConsoleService, if i do that, then the number of processes drops down. So now im not sure why something within the ConsoleService is logging in, taking a process and not releasing it...What i can check?
Need to find out what the maximum number of concurrent logins are over a period of 1 month. We need to do this as we may need to buy more licences.
View 4 Replies View RelatedI have successfully cleaned up our test environment but am having problems with the development environment.
We have a master table, a single materialized view log on that table, and 85 materialized views based on them.
Following is the output from my 'refresh_all_mviews' and query on 'deferror':08:36:04 SQL> SET serverout ON
DECLARE
v_failures NUMBER(12) := 0;
begin
dbms_mview.refresh_all_mviews(v_failures,'F','', refresh_after_errors => true, atomic_refresh => false);
dbms_output.put_line('Failures='||v_failures);
END;
/
08:36:33 SQL> 08:36:33 2 08:36:33 3 08:36:33 4 08:36:33 5 08:36:33 6 08:36:33 7 08
:36:33 8
Failures=5
PL/SQL procedure successfully completed.
08:36:47 SQL> 08:36:47 SQL> select * from deferror;
no rows selected
08:36:56 SQL>
why no rows are being selected? Do I have to 'set' something 'on'?
I am receiving this error in production databases...There are 2 probable extent failures for tablespace
View 14 Replies View RelatedI'm currently doing migration from Oracle 10gR2 RDF to Oracle 11gR2 Semantic Technology.I followed the steps on the documentation and successfully created the network using the following:
-----
EXECUTE SEM_APIS.CREATE_SEM_NETWORK('rdf_tblspace');
CREATE TABLE rdf_network_trace (id NUMBER, triple SDO_RDF_TRIPLE_S);
--Created SEQUENCE andTRIGGER FOR rdf_network_trace id
[code]....
when I looked at my Node Ids, they were like +635762253807433724+, +6118969225776891730+. The problem is, I am not the one who is assigning Node Ids, They were automatically generated when inserting TRIPLE data to the rdf table.
Did I miss something when I created my network?
Even though i am using COL1 CHAR(500) NULLIF COL1=BLANKS, then also i am getting same error for those columns.
View 13 Replies View RelatedHow to extract DDL of DBMS_JOB in sqlplus ?
View 30 Replies View RelatedI've defined DBMS_JOB in Oracle it is not starting on time. As per query it should start at 09:00 PM as given below.
SQL> SELECT TRUNC(SYSDATE) + 21/24 FROM DUAL;
TRUNC(SYSDATE)+21/24
--------------------
7/31/2012 9:00:00 PM
But instead it was started on 7/31/2012 1:14:10 AM. Which is wrong.
Following is script which I am using to submit this job.
DECLARE
X NUMBER;
BEGIN
[Code]....
I'm using dbms_metadata.get_ddl inside a package and I have a problem: if I execute the package directly, like "exec pkg_util.read_ddl('TA_DL_IDP', 'RMI_KUNDE') it works fine.
If I submit the same procedure using DBMS_JOB.SUBMIT, I get an error: Err_ -31603 - MSG: ORA-31603: object "RMI_KUNDE" of type TABLE not found in schema "TA_DL_IDP"
I know that in order to use dbms_metadata.get_ddl I need to have SELECT_CATALOG_ROLE and I know about the necessity to give explicit grants to objects rather than using roles when running pl/sql code from inside a package, but this is different: the different behavior is between running the same package in foreground and submitting it using DBMS_JOB.SUBMIT.