SQL & PL/SQL :: Update Remaining Empty Columns

Dec 20, 2010

My requirement is that under table name like A I have to update remaining empty columns as A and under B remaining null columns as B and so on.

View 14 Replies


ADVERTISEMENT

PL/SQL :: Update Multiple Columns With Single Update Statement

May 30, 2013

i am reading the columns value from different table but i want to update it with single update statement. such as how to update multiple columns (50 columns) of table with single update statement .. is there any sql statement available i know it how to do with pl/sql.

View 5 Replies View Related

Server Utilities :: Oracle 9i - Load Remaining Records?

Nov 25, 2011

In a flat file 50000 records are there.In that some of the records having special charcters.From that special character record the remaing records are not loading to oracle tables. to load the remaining records,after the record which is having special characters.The data is loading using sql*loader

View 3 Replies View Related

Server Administration :: Time Remaining To Complete Table Statistics?

Jan 16, 2012

I use the following query to find out the remaining time to complete the table statistics which is running currently.

SELECT SID, SERIAL#, opname, SOFAR, TOTALWORK,username,context,
ROUND(SOFAR/TOTALWORK*100,2) COMPLETE
FROM V$SESSION_LONGOPS
WHERE
TOTALWORK != 0
AND SOFAR != TOTALWORK
order by 1;

SOFAR column shows 9325 and totalwork column shows 12287.How to calculate the columns in terms of hours and minutes ?

And also sometime the query never shows the output of the query for the current running query.

View 1 Replies View Related

SQL & PL/SQL :: How To Update Multiple Columns

Dec 12, 2011

how to over come this error, because i need to update only 3 columns in the table and iam getting error when iam updating like this

update country1 set cname='japan','usa'
where cid=100,101

ERROR:ORA-01747,INVALID USER.TABLE.COLUMN,TABLE.COLUMN,OR COLUMN
SPECIFICATION

View 6 Replies View Related

SQL & PL/SQL :: Update When ID Column Is Matched / But One Of Others Columns Not

Mar 12, 2013

my need is to perform merge - update when id column is matched, but one of others columns not.When id column is not matched then I perform insert.

It works fine for matched or not matched id column.

Commented code is my try to perform check for others columns, The code should not update when all columns match. It should update only when on of columns doesn't match (except id column of course, because it's key column).

begin
merge into copy.table1 rr
using
(
select
ID ,
DEALID ,
ESTIMATIONDATE ,
BOUNDOVERESTIMATDATE ,
ESTIMATIONTYPEID ,
MARKETAMOUNT ,
LIQUIDATINGAMOUNT ,
[code]....

View 2 Replies View Related

SQL & PL/SQL :: Using Cursor To Update Multiple Columns

Oct 22, 2011

I need to write a script which copies 4 col data from one table to another table. there are three tables

cwat_curr_mst and cwat_assigned_customer and cwat_assignment_mst.
Cwat curr mst has PK curr_id and cwat_assigned_customer has PK assignment_id.
Also cwat_assigned_customer has customer_id.
In cwat_assignment_mst has Curr_id and Assignment_ID.

cwat_curr_mst and cwat_assigned_customer tables has 4 cols in common
they are
ASRT_SNM_NO, SNM_NO, FLORIDA_NO, CBRN_NO.

So from curr_mst all these 4 cols data needs to come/copy into cwat_assigned_customer.

View 20 Replies View Related

PL/SQL :: Update Two Columns In TABLE2 From TABLE1

Jan 25, 2013

I know this is a simple question for some of you, but I am new to SQLs,

I have two tables TABLE1 & TABLE2 as below, both tables contains more then 50million records:

SELECT * FROM TABLE1.
&&&&&&&&&&&&&&&&&&&&&&&&&&&
ID                        BUS_FID                WORKID                  STATIONID                 
---------------------- ---------------------- ---------------------- ----------------------
28400000117234         245                    13461428.25           16520877.8            
28400000117513         403                    13461428.25           16520877.8            
28400000117533         423                    13461428.25           16520877.8            
28400000117578         468                    13461428.25           16520877.8            
28400000117582         472                    13461428.25           16520877.8            

SELECT * FROM TABLE2.
&&&&&&&&&&&&&&&&&&&&&&&&&&&
BUS_FID                    ID                 TRPELID                RELPOS                 WORKID                 STATIONID               
---------------------- ---------------------- ---------------------- ---------------------- ---------------------- ----------------------
114                    28400000117658         28400000035396         23.225                                                              
115                    28400000117659         28400000035396         23.225                                                              
116                    28400000117660         28400000035396         23.225                                                              
117                    28400000117661         28400000035396         23.225                                                              
118                    28400000117662         28400000035396         23.225                                                              
119                    28400000117663         28400000035396         23.225                                                              
120                    28400000117664         28400000035396         23.225                                                              

[Code]....

Now I tried to use following SQL to update WORKID & STATIONID columns in TABLE2 but failed. BUS_FID in both tables have been UNIQUE indexed and they can be used as primary keys to join these two tables.

UPDATE (
  SELECT  p.WORKID px,
          p.STATIONID py,
          p.BUS_FID pid,
          temp.WORKID tempx,
          temp.STATIONID tempy,
  
[Code]....

with above code, Oracle returned following errors:

SQL Error: ORA-00904: "TEMPID": invalid identifier
00904. 00000 -  "%s: invalid identifier"

BTW, both two tables contains over 50 million records. So, if you have a better SQL to perform the same task.

View 6 Replies View Related

Oracle SQL - Update Table Value By Matching Columns

Mar 15, 2010

I have two table and trying to update tableA with data from tableB but gives an error. My TableA has columns - colA,colB,colC,colX and table B has columns - colA,colB,colX. Sample data looks like this:

tableA:
XXYY, local,3/19,48
XXYY,ixc,3/19,24
XXYYlocal,3/20,48
XXYY,local,3/21,48

Table B:
XXYY,local,48
XXYY,ixc,24
PPQQ,local,72

this is the query I wrote
update tableA a
set (a.colX)=(select (b.colX) from tableB b where a.colA=b.colA and a.colB=b.colB);

When i run it gives this error:single row subquery returns more than one row.

tableB has only 1 value for colX for each colA,colB record but tableA has mutiple colA and colB repeated but for all of thsoe in table A i want to update the tableB.colX value for matching colA and colB.

View 4 Replies View Related

SQL & PL/SQL :: Update Number Of Rows In Three Columns In Table?

Dec 13, 2011

how to update the middle of plenty rows in the middle of the columns

sample_data

id name state REGION LOC
1 v A.p 1 1
2 a
3 g K.A 0 3
4 y
5 i T.N 1 0
6 l M.P 0 1
7 c U.P

This is sample data,and i have this kind of large data and i need to fill the rows which are empty. In three columns state,region,loc with data like 0,web_intimation,1,

View 8 Replies View Related

SQL & PL/SQL :: Bulk Collect - Update Two Columns Without Any Filtration

Jun 19, 2013

I have more than 10 lakhs records in the table for which i am going to update two columns without any filtration. i have pasted my query in it..it's taking more time to update..is there any way to fine tune this block.

DECLARE
l_fallback_page Au_Case_Parallel_19062013.page_num%TYPE;
l_fallback_kwd Au_Case_Parallel_19062013.Fallback_keyword%TYPE;
lv_type varchar2(1000);

[Code]....

View 9 Replies View Related

PL/SQL :: Merge / Update With Multiple Tables And Columns

Sep 6, 2013

I am trying to update multiple columns from one table based on the results of another table So I have 3 tables as follows 

HISTORYSUMM_SNAPADM_CHOICE 
My SQL code is loosely SELECT SUM(H.HIS1),
SS.SNAP1,
AC.ADM1FROMHISTORY H,
SUMM_SNAP SS,ADM_CHOICE ACWHERE H.HIS2=SS.SNAP2AND SS.SNAP3=AC.ADM2GROUP BY SS.SNAP1,
AC.ADM1

 This works, and I am able to SUM the column as I need with the right numbers.  I altered the SUMM_SNAP table and now I want this summarized column to be in the table I tried using UPDATE, but there is no FROM clause to let me do the table join/group by 

UPDATE SUMM_SNAPSET SUMM_SNAP.SNAP3=SUM(H.HIS1)FROMHISTORY H,
SUMM_SNAP SS,ADM_CHOICE AC
WHERE H.HIS2=SS.SNAP2AND SS.SNAP3=AC.ADM2
GROUP BY SS.SNAP1, AC.ADM1 

The above is obviously wrong - but just trying to show whatI was thinking What would be the best method to get the numbers from the SUM into a table?

View 5 Replies View Related

SQL & PL/SQL :: Create Stored Procedure To Update Columns In Table

Dec 8, 2010

I have three tables fixtures, fixture_teams and team_tbl

fixtures consists of:

create table Fixture_tbl(
fixt_id varchar2(8),
fixt_date date,
fixt_time varchar2(10),
fixt_location location_t,
umpire_id varchar2(8),
player_of_match player_of_match,
home_team varchar2(20),
away_team varchar2(20),
[code]....

creating a stored procedure that updates the points column in the teams_tbl , the value that is updated in to the points column will be retrieved from the fixture_team table. so if team a has more goals than team b then the points column for team a will be increased by 6 else if the scores are equal they get 4 points each.

View 13 Replies View Related

SQL & PL/SQL :: Cursor Select For Update / Multiple Columns Of Different Tables

Apr 8, 2010

i have two tables test1 and test2. i want to update the column(DEPT_DSCR) of both the tables TEST1 and TEST2 using select for update and current of...using cursor.

I have a code written as follows :

DECLARE
v_mydept1 TEST1.DEPT_CD%TYPE;
v_mydept2 TEST2.DEPT_CD%TYPE;
CURSOR C1 IS SELECT TEST1.DEPT_CD,TEST2.DEPT_CD FROM TEST1,TEST2 WHERE TEST1.DEPT_CD = TEST2.DEPT_CD AND TEST1.DEPT_CD = 'AA' FOR UPDATE OF TEST1.DEPT_DSCR,TEST2.DEPT_DSCR;
[code].......

The above code when run says that it runs successfully. But it does not updates the desired columns[DEPT_DSCR].

It only works when we want to update single or multiple columns of same table...i.e. by providing these columns after "FOR UPDATE OF"
I am not sure what is the exact problem when we want to update multiple columns of different tables.

View 5 Replies View Related

SQL & PL/SQL :: Forall Update With Bulk Collect For Multiple Columns

Jan 25, 2013

I am trying to update a table column values if any change occurs using bulk collect and for all update not able to get idea. below is the proc working out.it is for insert and update using the cursors.

CREATE OR REPLACE PROCEDURE PRC_INS(P_ID IN NUMBER,P_STAT OUT NUMBER) IS
TYPE T_TEST_TAB IS TABLE OF T_DTLS%ROWTYPE;
V_PARAM T_TEST_TAB;
V_STATUS NUMBER;
V_BUS VARCHAR2(20);
V_UP VARCHAR2(1);
V_Q VARCHAR2(50);

[Code]....

View 2 Replies View Related

ODP.NET :: ORA-54017 - UPDATE Operation Disallowed On Virtual Columns?

Sep 2, 2013

I am usingOracle 12cODAC 12.1.010 and when make an update on table with virtual column i have this error:ORA-54017: UPDATE operation disallowed on virtual columns. I have seen that on edmx file the virtual column, the StoreGeneratedPattern property is not setted as Computed. Setting it (handly) works ok. Is a bug of ODAC? 

View 1 Replies View Related

SQL & PL/SQL :: Update Column In A Table Which Has 3 Columns Of 16 Million Rows?

Apr 25, 2012

trying to update a column in a table which has 3 columns of 16million rows from column in another table which has 1million rows, there is no relationship between the 2 tables.

Table A has 3 columns of 16million rows, the first two columns have 16million ID numbers, the 3rd colunm is currently NULL.

Table B has 1million Numbers, i need to somehow update column 3 in table A using the numbers in table B, it doesnt how many times each of the 1 million numbers are used but i dont want it to just update every row to the same value.

View 13 Replies View Related

Forms :: INSERT Record - Update Columns Of Table

May 31, 2010

I would like to UPDATE the columns p1 and p2 of my table student (studentid:pk,name,p1,p2,...) for a given studentid.and I have a when-button-pressed trigger with this

UPDATE student
SET student.p1=:validation.proj1,
student.p2=:validation.proj2
where UPPER(student.studentid)=UPPER(:validation.studentid);commit_form;

when I run my form with a correct studentid, I got this error: FRM-40508: ORACLE error: UNABLE to INSERT record

but it is cworking correctly in sqlplus; and I have all priveligies.

View 4 Replies View Related

Performance Tuning :: Update Columns Of One Table Using Another Table

Feb 6, 2011

I am trying to update columns of Table A with the columns of Table B. Both these tables have 60,000 rows each. I tried this operation using following 2 queries:

Query 1

Update TableA A
set
(A.col1,A.col2,A.col3)=(select B.col1,B.col2,B.col3
from TableB
where A.CODE=B.CODE)

Query 2
Update TableA A
set
(A.col1,A.col2,A.col3)=(select B.col1,B.col2,B.col3
from TableB
where A.CODE=B.CODE)
where exists
A.code = (select B.code
from TableB B
where A.code=B.code)

When i execute these two above queries, it keeps executing indefinitely.

View 4 Replies View Related

10g - Some VARCHAR2 Fields Empty?

Jul 21, 2011

Once a year in the application we have a specific query that gets used a lot. It's an UPDATE that updates a single record in a single table with a few different datatypes, but the issue is happening with one of the VARCHAR2 fields. It updates one VARCHAR2(2000) and three VARCHAR2(4000) fields at the same time.

This year, 9 of the 95 times it was used resulted in one of the VARCHAR2(4000) fields as null in the database. The users would not want this field to be null and 5 of the 9 have told us they entered something (the form they're filling out is a research proposal and leaving this field empty would be pointless because it's part of the funding request, so they're not doing it). The application isn't doing it because it's not consistent. I've checked the application and these fields can't be nulled any other way.

We just found the issue so I looked back over the past years back to 2005. Last year it didn't happen at all. In 2010 it happened a handful of times. Some years there were even more times. It's not always the same field but it's always a VARCHAR2 of at least 2000 characters.

I have a lot more information but it's all just details (let me know if you need to know more). I'm wondering if there is a bug in 10g with these types of fields. I don't believe it's malicious behavior on an individual's part but I suppose that's always possible.

how to research something like this. I tried to get access to Oracle Support and the Knowledge Base I heard they have but it doesn't look like I can do that

View 2 Replies View Related

How To Use CASE When Set Query Empty

Mar 23, 2009

I have a query that will either return one record or zero records. When it returns zero records I want to replace my attributes with a sentinel, like 'N/A'. I tried the CASE statement but couldn't get anything to work

Sample (does not work):
select
(case when exists (select product from tbl_product where productid = '123') then product else 'N/A' end) product
from tbl_product
where productid= '123';
If one record exists it should produce: 'My Widget' (or whatever)
If zero records exist it should produce: 'N/A'

View 3 Replies View Related

Temporary Tablespace Is Empty

May 10, 2011

While I was exporting ( schema level ) ,I am getting following errors :

vaughn$ exp parfile=qar808par.txt
Export: Release 11.1.0.7.0 - Production on Tue May 10 10:52:34 2011
Copyright © 1982, 2007, Oracle. All rights reserved.
Username: system
Password:
Connected to: Oracle Database 11g Enterprise Edition Release 11.1.0.7.0 - 64bit Production
Export done in WE8ISO8859P9 character set and AL16UTF16 NCHAR character set
server uses WE8ISO8859P1 character set (possible charset conversion)
About to export specified users .

. exporting pre-schema procedural objects and actions
. exporting foreign function library names for user TOXFIRE_TO_TSFDA
. exporting PUBLIC type synonyms
. exporting private type synonyms
. exporting object type definitions for user TOXFIRE_TO_TSFDA
About to export TOXFIRE_TO_TSFDA's objects ...
. exporting database links
. exporting sequence numbers
. exporting cluster definitions
EXP-00056: ORACLE error 25153 encountered
ORA-25153: Temporary Tablespace is Empty
EXP-00000: Export terminated unsuccessfully

'Parfile' contents :

owner=TOXFIRE_TO_TSFDA
file=exp_TOXFIRE_TO_TSFDA_QAR808.dmp
consistent=y
direct=y
recordlength=65535
log=exp_TOXFIRE_TO_TSFDA_QAR808.log

What is the reason, and It is saying that temporary tablespace is empty ( temp tablespace have almost free space ) why it is saying like that? And users default temp tablespace is that tablespace only ( database have only on temp tablespace

View 1 Replies View Related

SQL & PL/SQL :: Empty Space Creation

May 29, 2013

While i am inserting data into a specific table that table assigns empty spaces.

For example:
CREATE TABLE DEALER_MST
("DEALER_CODE" CHAR(10) NOT NULL ENABLE,
"REGION_CODE" CHAR(3),
"SUB_REGION_CODE" CHAR(3),
"DEALER_NAME" VARCHAR2(80),

[Code]....

But it is giving result as DS with 8 spaces. It assigns spaces in db automatically while fetching.

View 8 Replies View Related

Forms :: Empty Element In Item_list

Jan 13, 2013

I used a dynamic item_list. This list should contain only the result of the query but I found an empty element in the list. So, how to eliminate this element empty list?

see the picture:

[URL]........

View 4 Replies View Related

Forms :: Loop Insert Empty Row?

Jul 3, 2010

there this is my insert loop but the problem is there is row added more than the normal count ..

DECLARE
var_record_count NUMBER;
var_p_request NUMBER;

[Code]....

View 4 Replies View Related

SQL & PL/SQL :: Load Data Into Empty Table?

Jul 25, 2011

There is one table with data in ORCL1 database.I have created the table using create table statement in ORCL2 database.Now i want to insert only the data into table.

I know one method ... drop the table i created using drop table statement and then create the table with data using export/import.

Is there any other way we can load data into empty table?

View 29 Replies View Related

SQL & PL/SQL :: Query To Find Empty Column?

Aug 3, 2010

I have a table with thirty column for attendance like Day_A01,Day_A02......Day_A31.

I need a query that should return the column which is empty but its next and previous column is not empty.

View 13 Replies View Related

SQL & PL/SQL :: How To Check If Result Of Cursor Is Empty

May 20, 2010

How can i check if the result of a defined cursor is empty?

View 6 Replies View Related

PL/SQL :: External Table With Empty File

Oct 9, 2013

My db version: Oracle 11g I have an empty csv file.I created a external table for the empty csv file.When I run:select count(*) from externaltblname;It returns 1. It should return 0 right. In the definition, I specified "SKIP 1"But still it returns 1. When I use this external table to load into a target table. It loads a single row with null values.How to fix this.

View 2 Replies View Related

Empty Blocks In First Place On Loading A Table

Jan 4, 2011

what empty blocks are, and how to remove them.What I'd like to do is not have empty blocks in the first place on loading a table. I load a lot of "static" tables and would like to not have any wasted space at the end, with minimal shinanigans.

I've set pctfree 0
I"ve set initial to close to the end table size
I've set next to 1M
I've set pctincrease 0
blocksize is 8k

Yet I still need to at least do an alter table deallocate unused

View 8 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved