i am reading the columns value from different table but i want to update it with single update statement. such as how to update multiple columns (50 columns) of table with single update statement .. is there any sql statement available i know it how to do with pl/sql.
View 5 RepliesUpdating multiple ROWS with different values using single statement. Requirement is to update one column in a table with the values in the other table.
Say we have 3 tables, CORPORATION,CORPORATE PROFILE and MEMBER.
Each MEMBER has CORPORATE PROFILE which in turn is associated with CORPORATION. Now I need to update MEMBER table with CORPORATION identifier for members who belong to corporations with identifiers say 'ABC' and 'DEF'.
MEMBER table contains column 'CORPIDENTIFIER '. CORPORATEPROFILE table contains MEMBERID and CORPORATIONID,this will associate a member with the corporation. CORPORATION table contains ID and CORPIDENTIFIER.
Using the below query I am getting error,ORA-01427:single-row subquery returns more than one row
UPDATE MEMBER M SET M.CORPIDENTIFIER=
(SELECT A.IDENTIFIER FROM CORPORATION A,CORPORATEPROFILE B
WHERE B.CORPORATIONID=A.ID AND B.MEMBERID=M.ID AND (A.IDENTIFIER LIKE 'ABC' OR A.IDENTIFIER LIKE 'DEF'))
Sub query in the above query returns multiple rows and hence it is throwing the error.More than one members are associated with Corporations ABC and DEF. Is there any way possible to update all the rows in single query with out iterating the result set of sub query.
create table temp_tst
(
FILENAME VARCHAR2(200),
EDITED_BY VARCHAR2(50),
EDITED_TO VARCHAR2(50)
)
[code]....
Can I write a single update statement to update filename column replacing "_tst" with "_check"?
I have one doubt about update command in sql. How to update the multiple rows with different values using update statment.
Eg:-
SQL> set linesize 500;
SQL> set pagesize 500;
SQL> select * from emp;
SQL> select empno,ename,sal from emp;
SQL> select empno,ename,sal from emp;
EMPNO ENAME SAL
---------- ---------- ----------
7839 KING 5000
7698 BLAKE 2850
7782 CLARK 2450
7566 JONES 2975
7654 MARTIN 1250
[Code]....
The above table contains 14 records. Now i would like to update the salary column with different values like
EMPNO SAL
===========
7839 18000
7698 20000
7782 5000
...
...
...
7934 25000
How to update above values with single update query.
I have a column "empno" in EMP table and "deptno" in DEPT table . I want to update both the columns with single UPDATE statement. With out a creation of stored procedure or view(updating it through view).
View 4 Replies View RelatedI would like to insert a value if that value is not existing in the table (example for a column which contains date only new dates should be inserted and if the date already exists in the column then it needs to get updated )
example of scenario...
date s1 s2 s3
in the above if the date is new..it should get inserted with the appropriate slot no.(s1,s2,s3) if the date already exists it needs to update the no.in slot no.
how to over come this error, because i need to update only 3 columns in the table and iam getting error when iam updating like this
update country1 set cname='japan','usa'
where cid=100,101
ERROR:ORA-01747,INVALID USER.TABLE.COLUMN,TABLE.COLUMN,OR COLUMN
SPECIFICATION
Actully i am updating two table of data.. but below error message came..
update (select ename, dname
from emp e, dept d
where e.deptno = d.deptno
and empno = 7788)
set ename = 'X', dname = 'Y'
/
Error at line 1
ORA-01776: cannot modify more than one base table through a join view
I need to write a script which copies 4 col data from one table to another table. there are three tables
cwat_curr_mst and cwat_assigned_customer and cwat_assignment_mst.
Cwat curr mst has PK curr_id and cwat_assigned_customer has PK assignment_id.
Also cwat_assigned_customer has customer_id.
In cwat_assignment_mst has Curr_id and Assignment_ID.
cwat_curr_mst and cwat_assigned_customer tables has 4 cols in common
they are
ASRT_SNM_NO, SNM_NO, FLORIDA_NO, CBRN_NO.
So from curr_mst all these 4 cols data needs to come/copy into cwat_assigned_customer.
I am issuing an update statement in which I am using multiple tables it is giving me an error " set keyword missing"
update E_CONT_DETAIL_NUMB_VALUE ecdnv, y_obj_category yoc, t_contact tc
set ecdnv.ContTPRecCount = 1000
where tc.default_category_id = (select primary_key from y_ojb_category where tree_position = 'CONT')
and ecdnv.detail_field_id=tc.default_category_id;
update E_CONT_DETAIL_NUMB_VALUE ecdnv, y_obj_category yoc, t_contact tc
*
ERROR at line 1:
ORA-00971: missing SET keyword
I am trying to update multiple columns from one table based on the results of another table So I have 3 tables as follows
HISTORYSUMM_SNAPADM_CHOICE
My SQL code is loosely SELECT SUM(H.HIS1),
SS.SNAP1,
AC.ADM1FROMHISTORY H,
SUMM_SNAP SS,ADM_CHOICE ACWHERE H.HIS2=SS.SNAP2AND SS.SNAP3=AC.ADM2GROUP BY SS.SNAP1,
AC.ADM1
This works, and I am able to SUM the column as I need with the right numbers. I altered the SUMM_SNAP table and now I want this summarized column to be in the table I tried using UPDATE, but there is no FROM clause to let me do the table join/group by
UPDATE SUMM_SNAPSET SUMM_SNAP.SNAP3=SUM(H.HIS1)FROMHISTORY H,
SUMM_SNAP SS,ADM_CHOICE AC
WHERE H.HIS2=SS.SNAP2AND SS.SNAP3=AC.ADM2
GROUP BY SS.SNAP1, AC.ADM1
The above is obviously wrong - but just trying to show whatI was thinking What would be the best method to get the numbers from the SUM into a table?
i have two tables test1 and test2. i want to update the column(DEPT_DSCR) of both the tables TEST1 and TEST2 using select for update and current of...using cursor.
I have a code written as follows :
DECLARE
v_mydept1 TEST1.DEPT_CD%TYPE;
v_mydept2 TEST2.DEPT_CD%TYPE;
CURSOR C1 IS SELECT TEST1.DEPT_CD,TEST2.DEPT_CD FROM TEST1,TEST2 WHERE TEST1.DEPT_CD = TEST2.DEPT_CD AND TEST1.DEPT_CD = 'AA' FOR UPDATE OF TEST1.DEPT_DSCR,TEST2.DEPT_DSCR;
[code].......
The above code when run says that it runs successfully. But it does not updates the desired columns[DEPT_DSCR].
It only works when we want to update single or multiple columns of same table...i.e. by providing these columns after "FOR UPDATE OF"
I am not sure what is the exact problem when we want to update multiple columns of different tables.
I am trying to update a table column values if any change occurs using bulk collect and for all update not able to get idea. below is the proc working out.it is for insert and update using the cursors.
CREATE OR REPLACE PROCEDURE PRC_INS(P_ID IN NUMBER,P_STAT OUT NUMBER) IS
TYPE T_TEST_TAB IS TABLE OF T_DTLS%ROWTYPE;
V_PARAM T_TEST_TAB;
V_STATUS NUMBER;
V_BUS VARCHAR2(20);
V_UP VARCHAR2(1);
V_Q VARCHAR2(50);
[Code]....
I have to update 20 and 60 million records of a table. The update statement are
1> 20 million recs
update mycustomer set update_time=add_months(sysdate,240) where seq_num = 1;
commit;
2> 60 million recs
update mycustomer set update_time=sysdate-seq_num where seq_num <> 1;
commit;
Q1> Is there any way to improve performance
Q2> Will parallel dml improve performance
Q2> Would a pl/sql cursor make any difference in speed.
This is my query:
UPDATE t_tt_hours a
SET a.sak_request = (
SELECT b.sak_request
FROM t_requests b, co c
[Code]...
The problem I am having is that it is updating all rows even when it is pulling back a null value for b.sak_request. I've tried adding b.sak_request is not null to the select statement like this:
UPDATE t_tt_hours a
SET a.sak_request = (
SELECT b.sak_request
FROM t_requests b, co c
WHERE b.nam_eds_tracking_id = c.id_dir_track_eds
[Code]...
but it doesn't seem to make a difference. The reason I need to do this is that the difference between where it matches with a valid (non-null) value is 396 rows vs. 12,484 rows which is too time consuming to run on my page.
How to merge multiple rows into single row (but multiple columns) efficiently.
For example
IDVal IDDesc IdNum Id_Information_Type Attribute_1 Attribute_2 Attribute_3 Attribute_4 Attribute_5
23 asdc 1 Location USA NM ABQ Four Seasons 87106
23 asdc 1 Stats 2300 91.7 8.2 85432
23 asdc 1 Audit 1996 June 17 1200
65 affc 2 Location USA TX AUS Hilton 92305
65 affc 2 Stats 5510 42.7 46 9999
65 affc 2 Audit 1996 July 172 1100
where different attributes mean different thing for each Information_type. For example for Information_Type=Location
Attribute_1 means Country
Attribute_2 means State and so on.
For example for Information_Type=Stats
Attribute_1 means Population
Attribute_2 means American Ethnicity percentage and so on.
I want to create a view that shows like below:
IDVal IDDesc IDNum Country State City Hotel ZipCode Population American% Other% Area Audit Year AuditMonth Audit Type AuditTime
23 asdc 1 USA NM ABQ FourSeasons 87106 2300 91.7 46 85432 1996 June 17 1200
65 affc 2 USA TX AUS Hilton 92305 5510 42.7 46 9999 1996 July 172 1100
I want to run multiple IF Else statements in a single select SQL, each statement is one SQL operating on the same table, what is the best way to write this select SQL query ? If it is PL/SQL, when i get the result from the first IF statement I will skip the remaining execution, and so on..
View 9 Replies View Relatedcolumn1 column2 column3 column4
12 Mar-21-2005 BDW blah blah blah
11 Feb-07-2001 ZV ha ha ha
12 Jan-02-2002 YM zuck zuck zuckI want a view that has that data like this:
column1 column2
12 Mar-21-2005 - BDW - blah blah blah; Jan-02-2002 - YM - zuck zuck zuck
11 Feb-07-2001 ZV ha ha haCan you help with SQL ?
I tried to use this Oracle LISTAGG function in the SQL, but got a "string concatenation limit exceeded"
I'm getting back more than I want. I need to get the latest row in the PS_ACAD_STDNG_ACTN that has the academic standing code for students.
I thought if I max the effdt, strm, and effseq I would get back only one row. Especially effdt since a academic status is hardly ever updated on the same date.
PS_NTSR_GF_STUFILE will have multiple emplid's for students taking classes. PS_ACAD_STDNG_ACTN should have the last standing status for each student..(PRO = Probation, DIS = Dismissed).
UPDATE PS_NTSR_GF_STUFILE a
SET a.NTSR_GF_ENRL_STAT = nvl((
SELECT b.GBSA_SUB1
FROM PS_GBSA_DTL b, PS_ACAD_STDNG_ACTN c
WHERE c.ACAD_STNDNG_STAT = b.GBSA_VALUE
[code]....
In the table the names are having diffrent spaces for one name only one space between the words,for another name two spaces between words,for other names three spaces between the words.
I want to update with single space how can we that.
I am giving the data as follows.
CREATE TABLE student(sname VARCHAR2(30));
INSERT INTO student VALUES('PRAKASH BABU');
INSERT INTO student VALUES('RAJESH KUMAR');
INSERT INTO student VALUES('POORNA CHANDAR');
INSERT INTO student VALUES('ANIL RAJ');
INSERT INTO student VALUES('ABHI RAM KONA');
INSERT INTO student VALUES('SRI TEJA MEDI');
Like this the table contains millions of rows.
I want to update the names like this.
PRAKASH BABU
RAJESH KUMAR
POORNA CHANDAR
ANIL RAJ
ABHI RAM KONA
SRI TEJA MEDI
How to update two tables in single set or single query ?
View 8 Replies View Relatedi need a query for update..the logic is
i have to update a single column(x.c) in x table.here the condition is x.a is not null and x.b is not null x.d is null then update x.c=x.b for each row.
Can I achieve the merge (update-only) and delete in a single SQL statement?
merge into table_4
using
(select table_3.col1 col1,table_3.col2 col2,
from table_1, table_2, table_3
where
[code].....
delete from table_3 where <records identified in the 'using' clause of above merge>;
i.e.
delete from table_3
where (table_3.col1,table_3.col2)
in ( select table_3.col1,table_3.col2,
from table_1, table_2, table_3
where
join conditions.....
other conditions ....
group by table_3.col1, col1,table_3.col2
having count(*) >1 );
What I want is roughly as following :
WITH mywith as ( select table_3.col1,table_3.col2,
from table_1, table_2, table_3
where
join conditions.....
other conditions ....
group by table_3.col1, col1,table_3.col2
having count(*) >1 )
update table_4 set col3='N' where table_4.col1=mywith.col1 and table_4.col2=mywith.col2
delete from table_3 where table_3.col1=mywith.col1 and table_3.col2=mywith.col2;
The requirement I have is :
I have two tables eim_asset and eim_asset1.I want to update the table eim_asset1 using the following update SQL (Or Logic)
update eim_asset1
set emp_emp_login = (select login from s_user where row_id in
(select row_id from s_emp_per where row_id in
(select pr_emp_id from s_postn where row_id in
(select position_id from s_accnt_postn where ou_ext_id in
(select row_id from s_org_ext where row_id in
(select owner_accnt_id from s_asset where owner_accnt_id is not null)))))
It gives me the ORA error : ORA-01427:single-row subquery returns more than one row.know why I am getting it, because of the one-to-many relationship between owner accounts and their assets.
I have a table zTest with several products:
create table zTEST
( PRODUCT number,
ID number,
Flag number,
FLAG_L1 number );
[Code]...
The field FLAG_L1 is the field FLAG with a Lag 1 (order by ID, partition by PRODUCT). I want to write the field FLAG_L1 in an update statement, how can I do this?
Using Oracle 11gR2 on windows 7 client. I have a question on calculating sum() on multiple columns on different columns and store the results in a view. Unfortunately I could not post the problem here as it keeps on giving error "Sorry, this content is not allowed", without telling where or what it is! So I had to post it in the stack-overflow forum, here is the link: [URL] .........
View 6 Replies View RelatedHow to update two table column in single query ?
example :
update table1 t1 ,table2 t2
set t1.column = 'Yes',t2.column='Yes'
where t1.emp_code =t2.emp_code ;
We have to update a single column data in about 10 tables which has child/parent table relations, pk/fk constraints.. The column that we are updating is a part of primary key in half of the tables and part of foreign key in the other half tables.. I'm thinking of disabling all the foreign key constraints in the tables then update the column data then enable the foreign key constraints in these tables.
View 7 Replies View RelatedI have two update queries in the same Proc. One Seems to run just fine, the other I am getting this error:
ORA-01427: single-row subquery returns more than one row
The working Updates' structure is the same as the erroneous one. This works:
UPDATE P0525_STOREROOM_HOLDER H
SET H.STRATIFICATION_ID = (SELECT X.STRATIFICATION_ID
FROM EMISTRATIFICATION_XS X
WHERE H.TOA = X.TOA
AND H.STOREROOM = X.STOREROOM
AND H.NSN = X.NSN
AND X.ASSEMBLY = 'NO REQUIREMENT' );
This one gives me a single-row error:
UPDATE P0525_STOREROOM_HOLDER H
SET H.STRATIFICATION_ID = (SELECT X.STRATIFICATION_ID
FROM EMISTRATIFICATION_XS X
WHERE H.TOA = X.TOA
AND H.STOREROOM = X.STOREROOM
AND H.NSN = X.NSN
AND X.ASSEMBLY = 'ABOVE ALLOWANCE'
AND H.NSN_QUANTITY > 0);
I have run a check on the data and there doesn't appear to be any duplicate values in the second update... Both Updates are supposed to be updating record sets not a single row (i.e. the stratification_id where the criteria matches...
I have a below UPDATE STATEMENT and it is taking more than 1hr to complete. tune this to complete as quick as possible.
UPDATE A_TABLE A
SET FLG= 1
WHERE EXISTS (SELECT ID FROM B_TABLE B where A.ID=B.ID);
Count of the table A_TABLE --- 16,331,441
Count of the table B_TABLE --- 1,271,903
We have index on B.ID and A.ID