In a flat file 50000 records are there.In that some of the records having special charcters.From that special character record the remaing records are not loading to oracle tables. to load the remaining records,after the record which is having special characters.The data is loading using sql*loader
View 3 RepliesI have data file emp.dat in that i have 10000 records. My requirement is i want to skip last 100 records when i am loading it into EMP table using SQL *LODER.
View 6 Replies View RelatedMy loader start and say commit reach logical records 8 as there are 8 records but donot load them and write them into badfile. there is no logs file generation happing so unable to trace.
table
CREATE TABLE ERS_NRT_SRC
(
POLL_ID NUMBER(10) NULL,
TIME_OF_POLL DATE NULL,
SERVICE_DESC VARCHAR2(50 BYTE) NULL,
LOCATION_AGENT VARCHAR2(30 BYTE) NULL,
TRANSACTION_NAME VARCHAR2(50 BYTE) NULL,
[code]...
Load the selected records from the flat file using SQL*Loader.
I have a flat file it's having 100 records, I want to load first 10 records from the file using SQL*LOADER.
i want to load jpg into my oracle database 10g throw sqlloader
i did folloing steps
step 1)
Create the table as follows
CREATE TABLE image_table (file_id NUMBER(5),
file_name VARCHAR2(30),file_data BLOB);
step 2 )
Create control file as follows
LOAD DATA
INFILE *
INTO TABLE image_table
REPLACE
FIELDS TERMINATED BY ','
(
[code].....
step 3)
Then i have run this command
F:oracleproduct10.2.0db_1in>sqlldr control=F:practicecontrol.ctl
Username:system
Password
so i got this error
SQL*Loader: Release 10.2.0.5.0 - Production on Wed Jun 8 13:47:27 2011
Copyright (c) 1982, 2007, Oracle. All rights reserved.
SQL*Loader-404: Column FILE_ID present more than once in IMAGE_TABLE's INTO TABL
E block.
I am having query regarding sql loader. my data file is comm(,) seperated and I want to load the whole file in oracle table 'bill_temp' except 1st column data of data file.
e.g.
File name: bill_file.dat
fields seperated by comma ','
values are like
emp_id,emp_name,emp_sal,join_date
oracle table bill_temp having the below column:
emp_name,emp_sal,join_date
Here I want load the emp_name,emp_sal and join_date into oracle table bill_temp.
emp_id should not get loaded into table.
Is there any way to skip the loading of particular column data from data file into table?
I have one .mdb (Microsoft Access Database) file and it has some tables in it. I had load it once using toad. But now i have to load it frequently into the database. Is it possible using external table, so i can access that tables using "select" statement.
View 6 Replies View Relatedwhat i miss to load date and time from text file to oracle table through sqlloader
this is my data in this path (c:externalmy_data.txt)
7369,SMITH,17-NOV-81,09:14:04,CLERK,20
7499,ALLEN,01-MAY-81,17:06:08,SALESMAN,30
7521,WARD,09-JUN-81,17:06:30,SALESMAN,30
7566,JONES,02-APR-81,09:24:10,MANAGER,20
7654,MARTIN,28-SEP-81,17:24:10,SALESMAN,30
my table in database emp2
create table emp2 (empno number,
ename varchar2(20),
hiredate date,
etime date,
ejob varchar2(20),
deptno number);
the control file code in this path (c:externalctrl.ctl)
load data
infile 'C:externalmy_data.txt'
into table emp2
fields terminated by ','
(empno, ename, hiredate, etime, ejob, deptno)
this is the error :
C:>sqlldr scott/tiger control=C:externalctrl.ctl
SQL*Loader: Release 10.2.0.1.0 - Production on Mon May 31 09:45:10 2010
Copyright (c) 1982, 2005, Oracle. All rights reserved.
Commit point reached - logical record count 5
C:>
In oracle 11g R2 , I face a problem when I export/import xml records in the tables . Everytime it takes huge time (like 2 or 3 days) to import or export the data . But the dump size is very small (4gb) and this dump comes from a vendor so that I dont understand that is it a data structure problem or it the normal behaviour to import xml records.
I am not used to with xml record with oracle database before. Here I am using datapump feature . I also mention that when I delete the schema (where I imported the xml data) , it also takes 2/3 days to delete.The import script will hang in the following stage :
=========================
bash-3.2$ impdp system/sys123 DIRECTORY=isb_dir DUMPFILE=jblbld_20110301_01.dmp,jblbld_20110301_02.dmp,jblbld_20110301_03.dmp logfile=JBLBLD_28Jan2012.log schemas=TBLD;date
Import: Release 11.2.0.1.0 - Production on Sun Jan 29 11:10:38 2012
Copyright (c) 1982, 2009, Oracle and/or its affiliates. All rights reserved.
Connected to: Oracle Database 11g Enterprise Edition Release 11.2.0.1.0 - 64bit Production
With the Partitioning, OLAP, Data Mining and Real Application Testing options
Master table "SYSTEM"."SYS_IMPORT_SCHEMA_02" successfully loaded/unloaded
Starting "SYSTEM"."SYS_IMPORT_SCHEMA_02": system/******** DIRECTORY=isb_dir DUMPFILE=jblbld_20110301_01.dmp,jblbld_20110301_02.dmp,jblbld_20110301_03.dmp logfile=JBLBLD_28Jan2012.log schemas=TBLD
Processing object type SCHEMA_EXPORT/USER
[code]...
The machine has 16 cpu , 32 gb RAM and during export/import most of the time maximum memory will free.
I want to load geometry into a table using sql*loader. My datafile contains geometry defined as WKT URL...., a standard for geometry and also Oracle has a function called sdo_util.from_wktgeometry.If I'm using a separate 'insert into' statement using this function in sql*plus, there's no problem. But if I'm using the same function in my control-file for sql*loader import, I get a sql*loader-418 error: "bad datafile for column geometrie".
Why and how I can import WKT using sql*loader?
-- data file
id;geometrie
1;POINT(120123.123 485345.789)
2;LINESTRING(123456.01 482543.21, 125764.76 483444.11)
3;POLYGON((121121.22 484394.22, 122887.444 484721.48, 122911.098 486382.45, 121005.21 486592.01, 121121.22 484394.22),(121922.56 485333.23, 122010.22 485854.83, 121922.56 485333.23))
4;MULTIPOINT((120586 483958.33),(120635 483726.11))
5;MULTILINESTRING((117948 480284, 118215 481236),(118475 481604, 120462 482822))
6;MULTIPOLYGON(((123678 481948, 124654 485215, 123678 481948),(127321 488321, 124907 483921, 127321 488321)))
[code]....
I use the following query to find out the remaining time to complete the table statistics which is running currently.
SELECT SID, SERIAL#, opname, SOFAR, TOTALWORK,username,context,
ROUND(SOFAR/TOTALWORK*100,2) COMPLETE
FROM V$SESSION_LONGOPS
WHERE
TOTALWORK != 0
AND SOFAR != TOTALWORK
order by 1;
SOFAR column shows 9325 and totalwork column shows 12287.How to calculate the columns in terms of hours and minutes ?
And also sometime the query never shows the output of the query for the current running query.
I would like to load a text file into an oracle table.
View 10 Replies View RelatedHow to get ill-formatted data into Oracle table? I'm trying to load a large amount of data that is not arranged into neat columns and doesn't have proper record delimiters.
I'd like to use sql loader but I don't think that will work with unstructured data. I'm reading that perhaps using an external table would be the best way to do it. It's sample census data and I've attached a single record to look at.
I Have one csv file.i want to load to a table trough sql*loader.but in table 3 column is there.but in the csv file some record hav one semicolumn in last filed like this
1234;"hogit";78887;89
4567;"rtef";12565;89
how can we load...
I want to load data from LST file. The data format and control file is given below. It is loading the 1st line only. it is not loading the other lines. pls let me know what needs to be added in the control file to load this data?
Table Scan: |14-DEC-11 09:54 |xest | 16| 0|SYSTEM |ws_email|declare v_lst_suc da|14-DEC-11 08:32:39| 716444|XEST_USER
XEST_USER.X| | | | | |er.exe |te; v_nxt_sch date; | | |
EST_PING_RCV| | | | | | |cur_time varchar2(30| | |
D: 28609 out| | | | | | |); begin --select| | |
of 28609 Bl| | | | | | | last_date, next_dat| | |
ocks done | | | | | | |e into v_lst_suc, v_| | |
[code]....
I Have Flat file with 20columns of data,My intention is to load into two tables(i.e TABLE1 WITH 10 columns,TABLE2 With remaining 10columns)
View 5 Replies View RelatedI'm trying to load data into a table using SQL Loader but getting a failure error below.
Log File
========
SQL*Loader: Release 11.2.0.2.0 - Production on Wed Feb 6 23:54:25 2013
Copyright (c) 1982, 2009, Oracle and/or its affiliates. All rights reserved.
Control File: /opt/Infor/Outbound_Marketing/7.2.2/EM/metadata/trans.ldr
Data File: /opt/Infor/Outbound_Marketing/7.2.2/EM/logs/trans.log
Bad File: trans.bad
Discard File: none specified
[code]....
I got an csv file which got 52 sheets. Is there a way from sqlloder to load all these 52 sheets data. I in general seperate all these sheets into different CSV files and load. So, is there a better way to load.
View 6 Replies View RelatedI want to load data into more tables from many files ,based on first column value,which is FILLER field.i am trying to test this scenario with two oracle tables with similar definition. and load one record on each table using WHEN/POSITION keywords. for this , i added first column as reference column in the data which i have in ctl file itself.
1st table loaded with 1st record. But, 2nd record not loading.if i missed anything with WHEN/POSITION keyword ?
This is the error in log file for 2nd table(WD1):
Record 2: Rejected - Error on table WD1, column TAB.
ORA-01841: (full) year must be between -4713 and +9999, and not be 0
Table WD1:
0 Rows successfully loaded.
1 Row not loaded due to data errors.
1 Row not loaded because all WHEN clauses were failed.
0 Rows not loaded because all fields were null.
[code]....
load/unload csv file using sql command
View 1 Replies View Relatedload data in multiple table using sql loader. I have IN predicate which i don't know is allowed in the sql loader or not
my control file and is as below
LOAD DATA
INFILE 'c: empdemo05.dat'
BADFILE 'c: empad05.bad'
DISCARDFILE 'c: empdisc05.dsc'
REPLACE
[code]....
i am getting below error when executing above error
SQL*Loader-350: Syntax error at line 5.
Expecting "(", found keyword when.
WHEN DEPTNO IN ('
i have tried it , but it load the data in text file , but i want to load this data in excel sheet in such a way that each column should be in different-2 cell of excel sheet.
SQL> spool on
SQL> spool 'd:data.text'
SQL> select * from scott.emp;
EMPNO ENAME JOB MGR HIREDATE SAL COMM DEPTNO
---------- ---------- --------- ---------- --------- ---------- ---------- ----------
7369 SMITH CLERK 7902 17-DEC-80 800 20
7499 ALLEN SALESMAN 7698 20-FEB-81 1600 300 30
7521 WARD SALESMAN 7698 22-FEB-81 1250 500 30
7566 JONES MANAGER 7839 02-APR-81 2975 20
7654 MARTIN SALESMAN 7698 28-SEP-81 1250 1400 30
7698 BLAKE MANAGER 7839 01-MAY-81 2850 30
7782 CLARK MANAGER 7839 09-JUN-81 2450 10
7788 SCOTT ANALYST 7566 19-APR-87 3000 20
7839 KING PRESIDENT 17-NOV-81 5000 10
7844 TURNER SALESMAN 7698 08-SEP-81 1500 0 30
7876 ADAMS CLERK 7788 23-MAY-87 1100 20
EMPNO ENAME JOB MGR HIREDATE SAL COMM DEPTNO
---------- ---------- --------- ---------- --------- ---------- ---------- ----------
7900 JAMES CLERK 7698 03-DEC-81 950 30
7902 FORD ANALYST 7566 03-DEC-81 300 20
7934 MILLER CLERK 7782 23-JAN-82 1300 10
14 rows selected.
SQL> spool off;
SQL>
I am using perl script to dynamically generate the control file.If I have data in the control file as well as in the datafile, how would i write the control file in that case. Is the below one correct?
load data
INFILE '*'
INFILE '/export/home/test/test.csv'
INSERT INTO TABLE EMP fields
terminated by "," optionally enclosed by '"'
trailing nullcols
( empno, empname, sal, deptno )
[code]....
Is there any way that if my control file contains half of the data and my data file contains the other half of the data can i club this data into a logical record in the control file to populate the DB?
My exact 2nd requirement is, my DB contains 5 cols and for 1 col the data is common(countryName) which i have to pass to the control file dynamically and the .csv file contains the data for the other four cols. How could i combine these in the ctrl file and populate the DB?
so if the DB contains CountryName, empid, ename, sal and dept..I will get the CountryName to the ctrl file and csv contains the data for empid, ename, sal and dept. How would i combine these data into a logical record and populate the DB?
Output in the sqlldr log:-
------------------------------------------------------------------------------
Path used: Direct
Insert option in effect for this table: APPEND
Trigger DEV."R_TM_BK_BORROWER" was disabled before the load.
DEV."R_TM_BK_BORROWER" was re-enabled.
The following index(es) on table "YO"."TM_BK_BORROWER" were processed:
index DEV.I_NK_TM_BK_BORR_1 loaded successfully with 1554238 keys
index DEV.I_NK_TM_BK_BORR_2 loaded successfully with 1554238 keys
index DEV.I_NK_TM_BK_BORR_3 loaded successfully with 1554238 keys
index DEV.I_NK_TM_BK_BORR_31 loaded successfully with 1554238 keys
Bind array size not used in direct path.
Column array rows : 5000
Stream buffer bytes: 256000
Read buffer bytes: 1048576
Total logical records skipped: 1
Total logical records read: 1554241
Total logical records rejected: 48
Total logical records discarded: 2
Total stream buffers loaded by SQL*Loader main thread: 7695
Total stream buffers loaded by SQL*Loader load thread: 0
------------------------------------------------------------------------------
So, I still see in the sqlldr log that the stream buffers are laoded by main thread and load thread is still not being used. SQL*Loader load thread did not offload the SQL*Loader main thread. If the load thread takes care of the current stream buffers, then it allows the main thread to build the next stream buffer while the load thread loads the current stream on the server. We have a 24 CPU server.
I am using the following parameters set to true in the sqlldr:- parallel=true , multithreading=true , skip_index_maintenance=true in the sqlldr
I have table named purchage with 2 columns (order_no number,order_date date) in my database. I want to load the data from a file into that table. The below is the file format
100,4/3/2013 1:18:18 AM
101,4/3/2013 1:18:18 AM
102,4/3/2013 1:18:18 AM
103,4/3/2013 1:18:18 AM
104,4/3/2013 1:18:18 AM
105,4/3/2013 1:18:18 AM
106,4/3/2013 1:18:18 AM
how to load the date filed along with the time stamp.
My requirement is to to truncate the table and load it with the data present in file. In the control file, I used the "TRUNCATE" command as well.In case, if the file has some invalid data and sqlldr fails, my existing data will be lost. Is there any option in which the sqlldr does not TRUNCATE the table in case of a failure.
View 6 Replies View Relatedsqlldr works fine. but, i have primary keys defined in the table. So the SQL loader throws error that
SQL*Loader-951: Error calling once/load initialization
ORA-26002: Table WD has index defined upon it.
How should i change this load type to "normal" in sqlldr ? I think sqlldr made for bulk load purpose only.
I want to load single column data into multiple columns.
View 3 Replies View RelatedI have 780(12*65) csv files generated from 65 databases.Now I have to load this 780 csv files into 12 tables created in my database for some monitoring and reporting purpose.to call the sql loader I am plannig to create 780 lines like below.
sqlldr abc@tns/pwd control='E:htmlctlhtml_broken_jobs_rpt.ctl' log='E:htmlreportloghtml_broken_jobs_rpt.log'
sqlldr abc@tns/pwd control='E:htmlctlhtml_db_size_rpt.ctl' log='E:htmlreportloghtml_db_size_rpt.log'
sqlldr abc@tns/pwd control='E:htmlctlhtml_fragmentation_rpt.ctl' log='E:htmlreportloghtml_fragmentation_rpt.log'
sqlldr abc@tns/pwd control='E:htmlctlhtml_index_stats_rpt.ctl' log='E:htmlreportloghtml_index_stats_rpt.log'
sqlldr abc@tns/pwd control='E:htmlctlhtml_invalid_object_rpt.ctl' log='E:htmlreportloghtml_invalid_object_rpt.log'
sqlldr abc@tns/pwd control='E:htmlctlhtml_long_running_queries_rpt.ctl' log='E:htmlreportloghtml_long_running_queries_rpt.log'
we know creating 780 control files is the difficult task.So I have created only 12 control files. is there any mechanism to pass a varible (planning to declare it in the sqlldr line) to the infile clause like below in sql loader?
infile "E:htmlreportoutput&a_html_broken_jobs_rpt.csv"
here a is the variable name. it will change every 12 csv files once.
or
is there anyother way to achive this?
I have requirement of loading a part of the flat file that contains many headers and lines info. The program has to load the lines whose header recrd_type is 05 using SQL*LOADER.
eg of flat file.
Header
trans_code comp date rec_type
------------------------------------------------------------
8 12800002 0729201005
transcode_line acct date refrence
------------------------------------------------------------
4424604001002738307272010 24427330207710017569675
4424604001002738307272010 24427330207710017569675