basically this view has columns based on the previous tables column ( MEASURE_ID) values and the values will be corresponding value in column Percentage.
I have a data in one table with 6 columns where user may be updating values in all of these 6 columns or he may enter 3 or 4 columns based on that inserts should take place, this is similar to my previous thread , i am using if condition to check column for null if its not null then i will make a insert , but is there any other easier way to do this.
insert into ot_po values ('ss-po',1,ph_sys.nextval); insert into ot_inspect_head values (inh_sys.nextval,'ss-ins',1,'ss-po',1); commit; select * from ot_inspect_item
--Now if the inspection user issues the update statement , it will delete this row --from ot_inspect_item and reinserts the values with values based on --ii_flex_01,ii_flex_02,ii_flex_03 [code]...
I need to create a materialized view with a clob column based on a varchar2 column of a table.This is because in the mv the clob column data gets appended one after another.
I need to write a query in plsql to select records for first 3 distinct values of a single column (below example, ID )and all the rows for next 3 distinct values of the column and so on till the end of count of distinct values of a column.
eg: ID name age 1 abc 10 1 def 20 2 ghi 10 2 jkl 20 2 mno 60 3 pqr 10 4 rst 10 4 tuv 10 5 vwx 10 6 xyz 10 6 hij 10 7 lmn 10 . . . so on... (till some count) Result should be Query 1 should result ---> ID name age 1 abc 10 1 def 20 2 ghi 10 2 jkl 20 2 mno 60 3 pqr 10
query 2 should result --> 4 rst 10 4 tuv 10 5 vwx 10 6 xyz 10 6 hij 10
query 3 should result --> 7 lmn 10 . . 9 .. .. so on..
My requirement is to concatenate two column values and place them in a new column.I have done it using self join but it limits the purpose,meaning when I have more than 2 values for grouped columns then it won't work.How to make this dynamic,so that for any number of columns grouped,I can concatenate.
SELECT a.co_nm, a.mnfst_nr, a.mnfst_qty, a.mnfst_nr || ':' || a.mnfst_qty || ';' || b.mnfst_nr || ':' || b.mnfst_qty FROM vw_acao_critical a JOIN vw_acao_critical b ON a.co_nm = b.co_nm AND a.mnfst_nr = b.mnfst_nr [code]......
What will be the case when I need to concatenate for more number of values.
like when co_nm has three bahs and manfst_nr and manfst_qty has 3 values for each for bah.and if three are having same_mnfst nr then I should use something dynamic.how to achieve this.
I am working on a simple form which will get the user to fetch required columns of employee master.
For that i have created a form which will display the column names and select option. When user clicks on query, the form will display the selected columns in a block. After going thru if required the user can download it to excel.
As of now I do not have filtering option. For this I thought of creating view based on the selection and then fetch records from the view and display it in form.
To achieve this I would like to know How I create or replace a view dynamically based on values selected. I remember doing this sort of thing long back, but could not recollect it.
(1) how can i fill some value in a table column based on some existing column value automatically without user intervention. my actual problem is i have 'expiry date' column and 'status'. the 'status' column should get filled automatically based on the current system date. ex: if expiry date is '25-Apr-2011' and current date is '14-May-2011', then status should be filled as 'EXPIRED'
(2)hOw can i build 'select' query in a report (report 6i) so that it will show me list of items 'EXPIRED' or 'NOT EXPIRED' or both expired and not expired separately in a single report based on user choice. 'EXPIRED' & 'NOT EXPIRED' can be taken from the above question no. 1.
I am searching for a decent method / example code to subdivide a large table (into a global temp table (GTT) for further processing) based on a list of numeric/alphanumeric which is the resultset from a view.
I am groping with the following strategy in PL/SQL:
1 -- set up cursor, execute the view (so I have the list of identifiers)
2 -- create a second cursor (or loop?) which: accepts each of the identifiers in turn executes a query (EXECUTE IMMEDIATE?) on the larger table INSERTs (or appends?) each resultset into the GTT
3 -- Then the GTT contains just the requires subset of the larger table for further processing and eventual import into iReport for reporting.
GTT is defined and ready to go, the larger table contains approx 40,000 rows and I need to extract a dozen subsets or so which add up to approx 1000 rows.
My scenario is to insert values into 'out' column by comparing 's' and 'IP' columns of temp table.The exact situation is at first need to go to ip column,take a value and then go to source column and check for the same value of ip which is taken previously.Then after corresponding ip of that source column should be inserted back in previous source column.
The situation is marked clearly in file which i am attaching with '--' comments at respective places.I am also pasting the code which i tried out,unfortunately it is giving error as exact fetch returns more than requested number of rows since there are duplicates in the table.I tried it using nested for loops.Also implemented using rowid,but it didnt work.
fixing the errors or if there is any new logic that can be implemented.
DECLARE i_e NUMBER(10); BEGIN FOR cur_1 IN(SELECT IP from temp where IP IS NOT NULL) LOOP FOR cur_2 IN(SELECT IP from temp where s=cur_1.IP)
i am trying to create Procedure which will create the partitions based on the other table date values one per each day.
CREATE OR REPLACE PROCEDURE PARTITION_TEST(PART_DATE_TABLE IN VARCHAR2, TABLE_NAME IN VARCHAR2,SCHEMA_NAME IN VARCHAR2) AS V_PART_NM VARCHAR2(20); V_PART_CNT NUMBER; V_DATE DATE; V_SCHEMA_NAME VARCHAR(15);
[Code]..
It is not creating the partitions and even not giving any errors.
I have two tables lets say TAB_A and TAB_B. I altered table B to include a new column from table A I wrote a merge statement as follows to merge the data
MERGE INTO TAB_AUSING TAB_BON (TAB_A.SECURITYPERSONKEY=TAB_B.SECURITYPERSONKEY)WHEN MATCHED THEN UPDATE SET TAB_A.PPYACCOUNT=TAB_B.PPYACCOUNT;
I know INSERT is for inserting new records UPDATE to my knowledge is to modify currently existing records (loosely) MERGE is one I rarely used, until this particular scenario. The code works perfectly fine, but I was wondering how could I write an update statement? Or in this scenario should I even be using an update statement?
I have more than 100 records in CSV format. I have to import these records to a particular table which already contains data. I have to do a multiple update at a time, based on the condition . ie., if field1 is '1' then update field2 as 'A0001' and if field1 is '5' then update field2 as 'A0007' . The values are not in an order. Is it possible.
in one of the data base some of the column values are TE. i wanted to serch in what are the tables this TE values are present. so m running the below function
CREATE OR REPLACE FUNCTION find_in_schema(val VARCHAR2) RETURN VARCHAR2 IS v_old_table user_tab_columns.table_name%TYPE; v_where VARCHAR2(4000); v_first_col BOOLEAN := TRUE;
[code]....
but v_where := v_where || ' or ' || r.column_name || ' like ''%' || val || '%''' is giving me numaric or value error when i run as select find_in_schema('@TL') from dual; so how can i go ahed with the serch ?
ITEMNUM STORELOC lastyear currentyear AM1324 AM1 need sum(quantity) here need sum(quantity) AM1324 AM2 need sum(quantity) here need sum(quantity)
We have to update the last year and current year columns with sum of quantities for each item from matusetrans table based on date at different location in Inventory table.
we had nearly 13,000 records(itemnum's with different location) in inventory table in DB we have to update entire records.
How to write an sql queries to update lastyear and currentyear columns with sum of quantities based on itemnum and location in Inventory table
I used Region, Process by to search the report which appears as shown above. Then I use Choose Auditors column to select my Auditor and copy paste it into the report under To be Audited By col. Is there a way to automate the process. I am here using a tabular form in APEX. My main aim is to assign auditors based on Region, not equal to Processed by.
Need to access data in a table base on user parameter input where the data is stored like a spreadsheet with column headings JAN, FEB, MAR... and the rows are the years. Is there a way to create a generic SQL statement so that I don't have to have 12 if statements in the procedure?
I have a SP for comparing 80 diff column values in 8 table pairs and it is taking a huge lot of time to process as I have to process around 10k records.
desc Fault_Dim Name Null Type ------------------- -------- ------------------ KEY NOT NULL NUMBER(38) SYSTEM_NAME VARCHAR2(3 CHAR) PRIORITY VARCHAR2(40 CHAR) SEVERITY VARCHAR2(40 CHAR) TYPE VARCHAR2(40 CHAR) STATUS VARCHAR2(40 CHAR) CREATE_DT DATE SUBTYPE VARCHAR2(255 CHAR) [code]...
The Severity column has values as below 1,2,3, My requirement is to show results as in the attatched image.Where the count values are values from TOTAL_fault column from the fact table.
I believe this is possible in hierarchial queries and pivorting
I have one hirarchical query which return the parent to child hirarch level data. it has 11 level child data. i want to create column based on number of child in hirarchy. though i know it is 11 but it can change also.Is there any way i can create the column dynamically
How can we partition a table based on date if it does not have a date column.
Actually I have to compare two tables on daily basis and fetch few rows from those two tables and enter it to a third table.But both these tables does not have a date column.
I am confused if i need to alter those tables and add date column or if there is some way in which i can compare the data from the two tables for that particular day only and not the whole table data.
is it possible to base a Materialized View on results returned from a stored procedure?If not, do you see any other way except of filling a table with data from the stored procedure and then basing the MV on it?
