I have more than 100 records in CSV format. I have to import these records to a particular table which already contains data. I have to do a multiple update at a time, based on the condition . ie., if field1 is '1' then update field2 as 'A0001' and if field1 is '5' then update field2 as 'A0007' . The values are not in an order. Is it possible.
View 1 RepliesI have two tables lets say TAB_A and TAB_B. I altered table B to include a new column from table A I wrote a merge statement as follows to merge the data
MERGE INTO TAB_AUSING TAB_BON (TAB_A.SECURITYPERSONKEY=TAB_B.SECURITYPERSONKEY)WHEN MATCHED THEN UPDATE SET TAB_A.PPYACCOUNT=TAB_B.PPYACCOUNT;
I know INSERT is for inserting new records UPDATE to my knowledge is to modify currently existing records (loosely) MERGE is one I rarely used, until this particular scenario. The code works perfectly fine, but I was wondering how could I write an update statement? Or in this scenario should I even be using an update statement?
I have two tables as
Table LEAVE
Column Type Null Description
APP_NO Number(6,0) Not Null PK Leave Application Number
ECN Number(6,0) Not Null FK Employee Code Number
APP_Date Date Not Null Date of Application
From_Date Date Not Null Date from which the leave starts
TO_Date Date Not Null Date upto which the current application leave remains i.e. end of leave applied for date
NO_OF_Days Number(2,0) Not Null Difference between TO_Date and From_date
LEAVE_TYPE VARCHAR2(3) Not Null Can be one of SL, CL, LWP or LTA
Status VARCHAR2(25) Not Null Can be one of Saved, Rejected or Approved
Remark VARCHAR2(100) Nullable Reason to be put if status is rejected
[code]....
What I really want to do is that when a record is inserted in the LEAVES table (an application for leave is submitted by any employee and if it is approved) then I want to update the _USED values of the corresponding LEAVE_TYPE in the LEAVEENTITLE table which holds values of types of leaves entitled to employee.
For example if 3 rows are inserted in the LEAVES table as
INSERT INTO LEAVES (APP_NO,ECN,FROM_DATE,TO_DATE,APP_DATE,NO_OF_DAYS,LEAVE_TYPE,STATUS,REMARK)
(1,1234,'2012-01-01','2012-01-05','2012- 01-01',5,'SL','APPROVED',null);
INSERT INTO LEAVES (APP_NO,ECN,FROM_DATE,TO_DATE,APP_DATE,NO_OF_DAYS,LEAVE_TYPE,STATUS,REMARK)
(2,1235,'2012-01-01','2012-01-05','2012- 01-01',5,'CL','SAVED',null);
INSERT INTO LEAVES (APP_NO,ECN,FROM_DATE,TO_DATE,APP_DATE,NO_OF_DAYS,LEAVE_TYPE,STATUS,REMARK)
(3,1236,'2012-01-01','2012-01-05','2012- 01-01',5,'LTA','REJECTED','Clash with the annual meet, revise dates');
Then the value of SL_USED in the LEAVEENTITLE table of record corresponding to the ECN = 1234 should be updated with +5 and naturally the SL_ UNUSED value of the record should be updated as SL_ENTITLED - SL_USED. For the APP_NO 2 and 3 none of the values in LEAVEENTITLE should be updated as the STATUS is not 'APPROVED'
I tried with the following trigger, but is compiling with a warning (not showing what the warning is)
CREATE OR REPLACE TRIGGER leaveentitle
AFTER INSERT ON LEAVES
FOR EACH ROW
BEGIN
UPDATE LEAVEENTITLE LVE
SET LVE.SL_USED = SL_USED+(CASE
WHEN :NEW.LEAVE_TYPE = 'SL'&& NEW.STATUS='APPROVED'
THEN :NEW.NO_OF_DAYS
SL_UNUSED=SL_ENTITLED - SL_USED
ELSE 0
END),
[code]....
I have 2 tables
Table 1Name Item DateJon Apples 06/11/2013 00:30:00 hrsSam OrangesNish Apples
Table 2 - Net countName Item CountNish Apples 10Nish Oranges 17Nish BananaSam Apples 10Sam Oranges 1Sam Bananas 1Jon Apples 8
I need to create a job that checks Table 1 for new records added after last run and then add the count in Table 2 accordingly.how to achieve this using PL/SQl or something similar
i am trying to create Procedure which will create the partitions based on the other table date values one per each day.
CREATE OR REPLACE PROCEDURE PARTITION_TEST(PART_DATE_TABLE IN VARCHAR2, TABLE_NAME IN VARCHAR2,SCHEMA_NAME IN VARCHAR2)
AS
V_PART_NM VARCHAR2(20);
V_PART_CNT NUMBER;
V_DATE DATE;
V_SCHEMA_NAME VARCHAR(15);
[Code]..
It is not creating the partitions and even not giving any errors.
I have table with values :
PROV_IDMEASURE_IDPERCENTAGE
Z0000221P114 45
Z0000135P115 68
For the column all possible values are ( P102,P101,P103 etc toP124). I want to create a view ( if possible ) from the above with data output as :
PROV_ID P101 P102 P103 ............................P124
z000234 23 45 60 72
basically this view has columns based on the previous tables column ( MEASURE_ID) values and the values will be corresponding value in column Percentage.
I have a table with following values in a column
Table A
col1
10
35
20
25
I need to form a query which will take these four values in rownum part and split the records into 4 groups in Table B.
Table B- 90 records (10 + 35 + 20 + 25)
Now for example, the Table B is having emp no, order by ascending and i need to split into 4 groups,
with first group having start value -1 and end value -10
second group - start value -11 and end value-45
third group - start value -46 and end value -65
fourth group - start value - 66 and end value-90
one way i can do it by using union and count, which was a bit tedious if the no. of group goes upto 10.
note that the values in Table A is dynamically changing, so not able to hard code values.
I am attempting to update a single field in one table based on a select from two tables. However, I am receiving the following error.
ORA-00933: SQL command not properly ended
The sql I am using is as follows:
update PS_TRNS_CRSE_DTL
set RQMNT_DESIGNTN = 'TRN'
FROM PS_TRNS_CRSE_DTL A, PS_STDNT_CAR_TERM B
where (SELECT A.EMPLID, A.ACAD_CAREER, A.INSTITUTION, A.MODEL_NBR, A.ARTICULATION_TERM, A.TRNSFR_EQVLNCY_GRP, A.TRNSFR_EQVLNCY_SEQ, A.TRNSFR_STAT, A.GRADING_BASIS, A.RQMNT_DESIGNTN, B.STUDY_AGREEMENT
FROM PS_TRNS_CRSE_DTL A, PS_STDNT_CAR_TERM B
[code]......
i have a table where there are codes of length 6 or length 12 some times, i need to add the summary of amount based on two different types of codes, one is adding the distinct codes which are of 6 char long and other sum will be based on from substr(7) till last.
create table strings ( strings_var varchar2(12),strings_amt number);
insert into strings (strings_var,strings_amt) values ('02.01',10 );
insert into strings (strings_var,strings_amt) values ('02.01_A11111',15);
insert into strings (strings_var,strings_amt) values ('02.02_A11111',15);
insert into strings (strings_var,strings_amt) values ('03.01_B11111',15);
insert into strings (strings_var,strings_amt) values ('03.02_B11111',15);
the output which i want is as below.
string value
'02.01' 10
'A11111' 30
'B11111' 30
I have wells that can have multiple statuses (one record for each status). I need to create a column to display a Y or N based on whether or not a given well has only certain types statuses. If all records for a given well are Susp and/or Abd, then I want to display a Y. If the well records include Susp or Abd, but also have other statuses (or do not even have a status of susp or abd) then I want to display a N.
So:
Well Status ident
12345 SUSP Y
12345 SUSP Y
12345 ABD Y
98765 SUSP N
98765 PROD N
98765 ABD N
45678 SUSP Y
45678 SUSP Y
ASDFG ABD Y
ASDEG ABD Y
TTTTT PROD N
TTTTT TEMP
I have a result-set which has 4 columns like (Region, PaymentDate, DebitAmt, CreditAmt). This result-set will always have a maximum of one month's records in it.
Suppose, imagine i have data for a month (ex, Mar 1 to Mar 31)...
Now... to aggregate (sum) the amount columns (DebitAmt, CreditAmt) in my resultset based on different date ranges, i wrote a sql like below...
Quote:
SELECT
REGION,
SUM(CASE WHEN PAYMENTDATE BETWEEN MAR 1 AND MAR 15 THEN DebitAmt ELSE 0 END) AS Debit_H1,
SUM(CASE WHEN PAYMENTDATE BETWEEN MAR 1 AND MAR 15 THEN CreditAmt ELSE 0 END) AS Credit_H1,
[code]...
My doubt is, in the above query, to aggregate two different columns based on same condition, i am checking the same condition twice...
I got a requirement to check if a particular range of values are present , if few values missing then have to add null for the values. This has to be a SQL statement.
table 1 :
fiscal_month_id, value1, value2
2010100028482848
2010110025712709.5
2010120027452721.3
2011010026052692.25
2011020026382681.4
2011030030992751
2011040027662753.14
2011050029732780.625
This is the table. the fiscal month id denotes that the values is from month Oct(20101000) to May (20110500). The fiscal year cycle for me is from OCT to SEP. Hence when we select this table, the select should retreive the below data
fiscal_month_id, value1, value2
2010100028482848
2010110025712709.5
2010120027452721.3
2011010026052692.25
[code].....
How to do this in a select statement ?
This fiscal_month_ID is actual from another table where all time level information are kept.
I have a column transaction Number . It has the transaction number of goods sold.. Below is the sample.
1. PIT0120029015554492215851181828221018554492R06
2. XY1029201195J05
3. YJ1039201176J01
My Query :
I need to substr the transaction number which starts with PIT to susbst (trxno,1,12) .. and anything other than PIT i need full number without substr . But when i use the above code :" susbstr(trxno,1,12) ..": it will substr entire column,. Is there any way to substr only PIT and leave others,
DB:oracle 10g
I used Region, Process by to search the report which appears as shown above. Then I use Choose Auditors column to select my Auditor and copy paste it into the report under To be Audited By col. Is there a way to automate the process. I am here using a tabular form in APEX. My main aim is to assign auditors based on Region, not equal to Processed by.
View 4 Replies View RelatedI am trying to learn Oracle and trying to use Visual Basic 7 to connect to an Oracle database, upload a text file to an empty table and then update a second Oracle table based on the info in the first table. I know you can do this with SQL*Loader, but how about VB? I did some research and found this posting: Re: Using Bulk insert or SQL Loader in VB6 I borrowed the code from there and altered it for my application (see below).
Dim con As New ADODB.ConnectionDim rst As New ADODB.RecordsetDim rst2 As New ADODB.RecordsetDim rst3 As New ADODB.Recordset con.ConnectionString = "Provider=OracleDB;User ID=john;Password=doe;Data Source=TestDB;"con.Open 'open the text filerst.Open "C:OracleTestCombinedCombined.txt" 'rst2 is an empty recordset because TempTable is empty at this time.rst2.Open "select * from TempTable", con, adOpenDynamic, adLockOptimistic 'adding rows into TempTable.Do Until rst.EOFrst2.AddNew Array("PACKET", "DATERET"), Array(rst.Fields("PACKET"), rst.Fields("DATERET"))rst.MoveNextLoop rst.Closerst2.Closecon.Close
My second question is this - say I had a second Oracle table in the same DB called "MasterTable", with the same two fields as "TempTable" (PACKET and DATERET). I want to update the DATERET field in "MasterTable" with the DATERET field in "TempTable" ONLY when the "PACKET" field matches in both tables.
In my application i have a requirement as follows.I have 3 tables table1,table2,table3.I have 4 tickets for one license number which is related to client table as follows.
table1
=====
license_nbr(pk) name address
=============== ===== =======
LicNo1 test testing
Table2
=====
ticket number(pk) amountto be paid balance_amount license_nbr(fk table2)
tk1 200 200 0 LicNo1
tk2 300 300 0 LicNo1
tk3 400 400 0 LicNo1
tk4 500 500 400 LicNo1
table3
=====
payment table
ticket_number(fk table2) amount paid payment status license_nbr(fk table1)
tk1 1000 excess paid. LicNo1
so now the excess paid amount to be adjusted for the remaining tickets through tk2 to tk4.and only tk4 should remain with 400 the balance amount should be updated accordinglyand i have a license number which is a foreignkey of client table. writing a procedure for updating the table2 based on the table3.
have two queries that will return same columns from two different set of tables ( column mapping has been taken care of). The return type is out ref cursor. (P_SUPPLY_REORDER )
Query 1-SO
-----------------------------------
select
so.SMO_NO,
so.SPLY_ORD_DT,
so.fk_CUST_ID as CUST_ID,
so.CUST_PO_NO,
so.ATTENTION_NAME,
[code].....
Query-2 Xcom
--------------------------------------
select
null as sMO_NO,
xso.created_date as SPLY_ORD_DT,
xso.fk_cust_id as cust_id,
cust.cust_po_no as cust_PO_NO
,(sta.SHIP_TO_ATTN_FIRST_NAME||''||sta.SHIP_TO_ATTN_LAST_NAME) as attention_name,
xsol.CARTONS_ORDERED as SPLY_ORD_QTY,
[code].......
Now the requirement is
One of four conditions are possible for each Supply Reorder Number:
. Both table queries return no records- Populate all the P_SUPPLY_REORDER output fields with nulls
. SUPPLY_ORDER returns a record, but XCOM_ORDER_HEADER returns no records
- Populate output fields with values from the join of SUPPLY_ORDER and SUPPLY_ORDER_LINE.
. SUPPLY_ORDER returns no records, but XCOM_ORDER_HEADER returns one record
- Populate output fields with values from the join of XCOM_ORDER_HEADER and XCOM_ORDER_LINES.
. SUPPLY_ORDER returns a record, and XCOM_ORDER_HEADER returns a record; find out the latest order by comapring max(SPLY_ORD_DT)
from SUPPLY_ORDER with max(CREATED_DATE) from XCOM_ORDER_HEADER.
- If the latest order is in SUPPLY_ORDER, then populate output fields with values from the join of SUPPLY_ORDER and SUPPLY_ORDER_LINE.
- If order dates are equal from both join results, then populate output fields with values from the join of SUPPLY_ORDER and SUPPLY_ORDER_LINE.
- If the latest order is in XCOM_ORDER_HEADER, then populate output fields with values from the join of XCOM_ORDER_HEADER and XCOM_ORDER_LINES.
Question is how can we switch over the queries to pull respective dataset based on these conditions ( checking that which table join is going to return a row and then based upon latest order if both tables return a row) and all this logic as part of single SQL statement that is returned as OUT Ref Cursor.
i have two tables one as test_master and other one limit master.
test master table structure
ct_id ct_a ct_b ct_C ct_d ct_e...... etc
1 -- -- -- -- --
1 -- -- -- -- --
2 -- -- -- -- --
limit master structure
limit_id ct_a_limit ct_b_limit ct_c_limit ct_d_limit ct_e_limt ..... etc
1 -- -- -- -- -- -- -- --
2 -- -- -- -- -- -- -- --
ct_id and limit_id is match column used for mapping.
now i want the total count of no of records in test_master in which test_master column value not exceed limit master column limit value if any one column exceeds its limit then the same row will be in my count criteria.
how to achieve the same using sql/oracle query.
I have two tables. By joining these two tables, I need to update a field in table1.
UPDATE table1
SET table1.FLAG = 'Fixed'
where table2.lastname = table1.lastname
and table2.status in ('fulltime','parttime')
I keep getting error 'table1.lastname' is invalid identifier.
I can't understand the error message. I made sure that the fields exist.
i have a list of 500 tables. I want to delete data from those tables based on a condition. (Data before 2008 year needs to be deleted). Each table has a column based on which data needs to be deleted. Provide a code which does this efficiently and fast. Bulk collect is preferable.
View 17 Replies View RelatedCREATE TABLE test1
(strt_num NUMBER ,
end_num NUMBER ,
des VARCHAR2(5),
CONSTRAINT pk_strt_num PRIMARY KEY (strt_num)
);
INSERT INTO test1 VALUES (5, 8, 'GC');
INSERT INTO test1 VALUES (10, 25, 'AB');
INSERT INTO test1 VALUES (12, 35, 'PC');
INSERT INTO test1 VALUES (22, 65, 'LJ');
SELECT * FROM test1
STRT_NUM END_NUM DES
-------------- ------------ -------------
5 8 GC
10 25 AB
12 35 PC
22 65 LJ
The requirement is the records should be split based on below conditions
1. Split only those records WHERE (end_num - strt_num) > 10
2. If TRUNC((end_num - strt_num)/10) = n, then n + 1 number of rows should be created for that record
3. While splitting the records,
-> For first record , START_NUM = Original STRT_NUM and END_NUM = START_NUM + 10
-> Second record , STRT_NUM = previous END_NUM + 1 and END_NUM = previous END_NUM + 10
And this should continue for all records except the last record
-> For last record, STRT_NUM = previous END_NUM + 1 AND END_NUM = Original END_NUM
This table has 5 million records. Only for 2000 records (end_num - strt_num) > 10.
Expected Output.
STRT_NUM END_NUM DES
------------- -------- ---------
5 8 GC -- No chage, END_NUM - STRT_NUM < 10
10 20 AB
21 25 AB
12 22 PC
23 32 PC
33 35 PC
22 32 LJ -- STRT_NUM = Original STRT_NUm, END_NUM = STRT_NUM + 10
33 42 LJ -- STRT_NUM = Previous END_NUM + 1, END_NUM = previous END_NUM + 10
43 52 LJ -- STRT_NUM = Previous END_NUM + 1, END_NUM = previous END_NUM + 10
53 62 LJ -- STRT_NUM = Previous END_NUM + 1, END_NUM = previous END_NUM + 10
63 65 LJ -- STRT_NUM = Previous END_NUM + 1, END_NUM = Original END_NUM
,i have a table called travel detail from which i have retrieved few rows based on 1 condition by using LOV and on next few rows modification is allowed. The rows are getting modified but it is also allowing me to enter in next blank row and insert any data in that row.how can i retrieve only that data which is based on the given condition. Further blank rows should not b displayed.
View 2 Replies View RelatedI want to increment a counter in a loop based on a condition.
Here is how my xml looks like
<result>
<resultset id=1>
<value>
[Code]....
I need to look at each and every resultset and check if the value is >400 and if it is then display some text. Something like this
<outputvalue>
Yes, there is a value greater than 400
</outputvalue>
In my XSL, I declared a variable called count with value 0. I created a for-loop which goes through these results. Then inside the loop there is a condition to cehck if the value is > 400. If the value is >400, then the counter is incremented.
````````````````````
<outputvalue>
<xsl:variable name="Count" select="0"></xsl:variable>
<xsl:for-each select="/results/resultset">
[Code]....
There is a problem with the above code is that result is like this
<outputvalue>
*1*
Yes there is a resultset with greater than 400
</outputvalue>
Is there a way I can just remove the character 1 from the output? Or is there a better way to increment?
while replicating form mssql 2005 it is entering space for null in oracle clob col.so i wanted to know.
1)can check constaint modify the content of column on which it is defined?
like i want to enter null in a column , if entered date is greater than current date else the entered date.i do not want to use triggers or client side script.
I want to use java-script to open a prompt to see if the user wants to change the date of a work order (Located in Work_order_info called "opened_date")
What I have so far:
var n = prompt("Is the checklist starting now? (Type either y or n)", "y or n");
if (n == "y" || n == "Y"){
alert("The opened date has now been changed!");
}else if (n = "n" || n == "N"){
alert("The opened date has not been changed!");
}else{
alert("You needed to type either n or y, nothing else!");
}
I'm not entirely sure how to tell the table to change the opened_date to sysdate. I'm sure it's really simple >.
find the logic to query data based on a condition like..I am having a table dummy
USERNAME RESP_NAME FUNC_NAME MESSAGE
-------- --------- ------------------ ------------
TEST1 SYS_ADMIN CONCURRENT_PROGRAM AAAAAAAAAAAA
TEST1 SYS_ADMIN % BBBBBBBBBBBB
TEST1 % CONCURRENT_PROGRAM CCCCCCCCCCCC
TEST1 % % DDDDDDDDDDDD
% SYS_ADMIN CONCURRENT_PROGRAM EEEEEEEEEEEE
% SYS_ADMIN % FFFFFFFFFFFF
% % CONCURRENT_PROGRAM GGGGGGGGGGGG
% % % HHHHHHHHHHHH
The above 8 are the possible ways to key in the data using a form.The logic is like based on a particular condition the message should display in the report.If they specify a particular USER and RESP_NAME and FUNC_NAME then it should display AAAAAAAAAAA (This should take priority first). The priority is in order the default should be the last one.
Oracle 11g databaseidval1val2100a110b120c200a220b
WITH input AS
(SELECT 1 id
[Code].....
input; Output:idval1val2assigned_number100a0110b0120c2200a0220b1 The dense numbering sequence should be assigned to each row based on id and val1 column. For a given Id, the numbering only starts after val1 > 1 till then the assigned_number will be zero.
The attachment contains the table info. The condition is that when there are childer for the master ,the master record shd be negated . Excuse me if this very easy. Example -DEL HAS children so the record with DEL and DEL SHD not be in the result query. Example -RAG HAS NO children. so the MASTER record should be taken.
Input
COL1COL2COL3COL4
MASTERDELDELP1
MASTERDELJANP2
MASTERDELAGRP3
MASTERRAGRAGP1
MASTERCENAPTP2
MASTERRUGRUGP1
My expected output
COL1COL2COL3COL4
MASTERDELJANP2
MASTERDELAGRP3
MASTERRAGRAGP1
MASTERCENAPTP2
MASTERRUGRUGP1
i have used radio button under dynamic conditions for an interactive report.eg: radio button values are like a) front end b)middlware c)back end.so based on the selected value of the radio button, interactive report appears. and each fields in radio button have separate set of users. now my issue is,based on the user logging in, the default value should set up while the page is loaded...[i.e... if a front end user logs in, the default value of tat radio button shd be front end...]
View 5 Replies View RelatedI have made a travel booking system which comprises of 3 forms
1)Travel Booking form
2)Reservation Form
3)Cancellation Form
Under one booking number i can add multiple users in which they can have there multiple travels.
Users can cancel there individual travels under a prescribe booking number which on doing the Cancel flag turns to 'Y'.
What i want is, If a user is cancelling his/her travel under any booking number then while retriving the records in Travel Booking form, the travels which are cancelled should not be in enable mode.
For one user there can be 4 travels out of which 2 are cancelled, how can i track only those records whoes cancel flag is set to Y. some logic to find it out. Else can i use :system.cursor_record. If yes, How to use it for this system.