Oracle 11g databaseidval1val2100a110b120c200a220b
WITH input AS
(SELECT 1 id
[Code].....
input; Output:idval1val2assigned_number100a0110b0120c2200a0220b1 The dense numbering sequence should be assigned to each row based on id and val1 column. For a given Id, the numbering only starts after val1 > 1 till then the assigned_number will be zero.
I have the following query with analytic function but wrong results on the last column COUNT.
1)I am getting the output order by b.sequence_no column . This is a must.
2)COUNT Column :
I don't want the total count based on thor column hence there is no point in grouping by that column. The actual requirement to achieve COUNT is:
2a -If in the next row, if either the THOR and LOC combination changes to a new value, then COUNT=1
(In other words, if it is different from the following row)
2b-If the values of THOR and LOC repeats in the following row, then the count should be the total of all those same value rows until the rows become different.
(In this case 2b-WHERE THE ROWS ARE SAME- also I only want to show these same rows only once. This is shown in the "MY REQUIRED OUTPUT) .
My present query:
select r.name REGION ,
p.name PT,
do.name DELOFF,
ro.name ROUTE,
[code]...
My incorrect output[PART OF DATA]:Quote:
REGIONPT DELOFF ROUTE THOR LOC SEQ COUNT
NAASNAAS MAYNOOTHMAYNOOTHR010 DUBLINRD CEL 1 1
NAASNAAS MAYNOOTHMAYNOOTHR010 NEWTOWNRD CEL 2 1
[code]...
My required output[PART OF DATA]-:Quote:
REGIONPT DELOFF ROUTE THOR LOC COUNT
NAASNAAS MAYNOOTHMAYNOOTHR010 DUBLINRD CEL 1
NAASNAAS MAYNOOTHMAYNOOTHR010 NEWTOWNRD CEL 1
NAASNAAS MAYNOOTHMAYNOOTHR010 PRIMHILL CEL 1
[code]...
NOTE :Count as 1 is correctly coming.But where there is same rows and I want to take the total count on them, I am not getting.
i have two tables one as test_master and other one limit master.
test master table structure
ct_id ct_a ct_b ct_C ct_d ct_e...... etc
1 -- -- -- -- --
1 -- -- -- -- --
2 -- -- -- -- --
limit master structure
limit_id ct_a_limit ct_b_limit ct_c_limit ct_d_limit ct_e_limt ..... etc
1 -- -- -- -- -- -- -- --
2 -- -- -- -- -- -- -- --
ct_id and limit_id is match column used for mapping.
now i want the total count of no of records in test_master in which test_master column value not exceed limit master column limit value if any one column exceeds its limit then the same row will be in my count criteria.
how to achieve the same using sql/oracle query.
I have oracle table has records like this clnt pno beg_dt end_dt load_ts
502852 02 01-NOV-93 31-OCT-94 01-AUG-12
502852 01 01-OCT-93 31-AUG-94 01-SEP-12
502866 01 01-JUN-90 31-DEC-90 01-AUG-12
256974 01 01-JAN-90 31-MAY-90 01-SEP-12
280441 01 01-JUN-96 31-MAY-97 01-AUG-12
[Code]....
I am writing an oracle query using analytic funtion to list that has max(load_ts)
But my query returns bad results and retrieve all the records for some reason.
select a.*
from
(
select
CLNT,
[Code]....
Is it possible to make query with analytic function or somehow to represent output data for next example (sql: ???):
Table: Order
sql: select * from order
Sql output>
Item Barcode Qty
---- ------- ---
1 100100 2
2 100200 1
3 100300 3
Table: Order
sql: ???
Sql output>
Item Barcode Qty ElementarQty
---- ------- --- ---
1 100100 2 1
1 100100 2 1
2 100200 1 1
3 100300 3 1
3 100300 3 1
3 100300 3 1
Do we have analytic function equivalent of following?
select object_type,owner from dba_objects group by object_type,owner ;
I am trying to get a unique srno for a combination of a 2 fields - here object_type and owner
OWNEROBJECT_TYPESRNO
SYSVIEW1
SYSTABLE2
SYSPROCEDURE3
SYSTEMVIEW4
SYSTEMTABLE5
SYSTEMFUNCTION6
SYSTEMPROCEDURE7
SCOTTTABLE8
SCOTTVIEW9
.......................
also how can I get the SRNO?
I can' use sequence in the group by function and if I get equivalent analytic for above group by even then I can't write row_number as the order by gives detail record
I don't want to wrap this select inside other select
ihave query quite like this: with--
This query selects one
"representant" acct_id per group (about 300 rows total)acct_repres as( select distinct acct_id, origin_id, acct_parm_id from ( select a.* , source_id , dense_rank() over (partition by source_id origin_id order by acct_nbr nulls first, acct_id) as odr from account a join account_parm ap on (a.parm_id = ap.acct_parm_id) ) where odr = 1)select col1 , col2 , ( select accct_id from acct_repres ar where ar.acct_parm_id = t2.acct_parm_id) col3 , ( select count(1) from acct_repres) col4from some_table t1join other_table t2 on (....)
And here it comes.
The "acct_repres" subquery returns more than 300 rows when executed separately. But when used in CTE sometimes (depending on execution plan) it seems to have only one row - the value in the column col4 is "1",while value for col3 is NULL for most of the cases. It looks like the the dense_rank function and the condition "where odr =1" are evaluated at the very end.
When I use MATERIALIZE hint the result was the same. But when I put the result of account_repres into dedicated table and use that table instead of CTE the output is correct.
How can I refer the result of inner query - max(t.col3) in the outer query. I tried the 'group by' but it is not performing well
select
t1.col5, t1.col6
from t1,
(select t.col1
t.col2
[code].......
I have a requirement to calculate the maximum number of concurrent calls from the following data:
Create_date connect_date_time disconnect_date_time duration ...
12/01/10 13:20:26 1263253551 1263254153 602
...
I have attempted to use the analytic function to keep a running total of the count of active calls based on the connect and disconnect times given for each record row.
e.g.
SELECT
count(*) calls,
avg(duration)/60 average_duration_mins,
max(duration)/60 max_duration_mins,
sum(duration)/60 total_mins,
(SUM(DURATION)/60)*0.04 total_cost_4c_per_min
[code]....
i have a table where there are codes of length 6 or length 12 some times, i need to add the summary of amount based on two different types of codes, one is adding the distinct codes which are of 6 char long and other sum will be based on from substr(7) till last.
create table strings ( strings_var varchar2(12),strings_amt number);
insert into strings (strings_var,strings_amt) values ('02.01',10 );
insert into strings (strings_var,strings_amt) values ('02.01_A11111',15);
insert into strings (strings_var,strings_amt) values ('02.02_A11111',15);
insert into strings (strings_var,strings_amt) values ('03.01_B11111',15);
insert into strings (strings_var,strings_amt) values ('03.02_B11111',15);
the output which i want is as below.
string value
'02.01' 10
'A11111' 30
'B11111' 30
I have wells that can have multiple statuses (one record for each status). I need to create a column to display a Y or N based on whether or not a given well has only certain types statuses. If all records for a given well are Susp and/or Abd, then I want to display a Y. If the well records include Susp or Abd, but also have other statuses (or do not even have a status of susp or abd) then I want to display a N.
So:
Well Status ident
12345 SUSP Y
12345 SUSP Y
12345 ABD Y
98765 SUSP N
98765 PROD N
98765 ABD N
45678 SUSP Y
45678 SUSP Y
ASDFG ABD Y
ASDEG ABD Y
TTTTT PROD N
TTTTT TEMP
Is anyway to create function based index for group function columns.
For example
select max(timestamp),min(age),averge(sal).... ... .. from tab;
I used Region, Process by to search the report which appears as shown above. Then I use Choose Auditors column to select my Auditor and copy paste it into the report under To be Audited By col. Is there a way to automate the process. I am here using a tabular form in APEX. My main aim is to assign auditors based on Region, not equal to Processed by.
View 4 Replies View RelatedI have a result-set which has 4 columns like (Region, PaymentDate, DebitAmt, CreditAmt). This result-set will always have a maximum of one month's records in it.
Suppose, imagine i have data for a month (ex, Mar 1 to Mar 31)...
Now... to aggregate (sum) the amount columns (DebitAmt, CreditAmt) in my resultset based on different date ranges, i wrote a sql like below...
Quote:
SELECT
REGION,
SUM(CASE WHEN PAYMENTDATE BETWEEN MAR 1 AND MAR 15 THEN DebitAmt ELSE 0 END) AS Debit_H1,
SUM(CASE WHEN PAYMENTDATE BETWEEN MAR 1 AND MAR 15 THEN CreditAmt ELSE 0 END) AS Credit_H1,
[code]...
My doubt is, in the above query, to aggregate two different columns based on same condition, i am checking the same condition twice...
I got a requirement to check if a particular range of values are present , if few values missing then have to add null for the values. This has to be a SQL statement.
table 1 :
fiscal_month_id, value1, value2
2010100028482848
2010110025712709.5
2010120027452721.3
2011010026052692.25
2011020026382681.4
2011030030992751
2011040027662753.14
2011050029732780.625
This is the table. the fiscal month id denotes that the values is from month Oct(20101000) to May (20110500). The fiscal year cycle for me is from OCT to SEP. Hence when we select this table, the select should retreive the below data
fiscal_month_id, value1, value2
2010100028482848
2010110025712709.5
2010120027452721.3
2011010026052692.25
[code].....
How to do this in a select statement ?
This fiscal_month_ID is actual from another table where all time level information are kept.
I have a column transaction Number . It has the transaction number of goods sold.. Below is the sample.
1. PIT0120029015554492215851181828221018554492R06
2. XY1029201195J05
3. YJ1039201176J01
My Query :
I need to substr the transaction number which starts with PIT to susbst (trxno,1,12) .. and anything other than PIT i need full number without substr . But when i use the above code :" susbstr(trxno,1,12) ..": it will substr entire column,. Is there any way to substr only PIT and leave others,
DB:oracle 10g
based on the following information
grade lowsal highsal
------ ----- ------
1 700 1200
2 1201 1400
3 1401 2000
4 2001 3000
5 3001 9999
for the employee table to assign grade for each employee based on his salary the following plsql procedure is giving error:
-----------------------------------------------------------
CREATE OR REPLACE PROCEDURE GRADE(EID IN NUMBER,BONUS OUT NUMBER) IS
vGRADE NUMBER(8,2);
vSAL NUMBER(8,2);
BEGIN
vGRADE=1
SELECT SAL INTO vSAL FROM EMP WHERE EMPNO=EMPID;
IF vSAL<= 700 THEN
vGRADE:=1;
ELSEIF vSAL<= 1201 THEN
[code]....
have two queries that will return same columns from two different set of tables ( column mapping has been taken care of). The return type is out ref cursor. (P_SUPPLY_REORDER )
Query 1-SO
-----------------------------------
select
so.SMO_NO,
so.SPLY_ORD_DT,
so.fk_CUST_ID as CUST_ID,
so.CUST_PO_NO,
so.ATTENTION_NAME,
[code].....
Query-2 Xcom
--------------------------------------
select
null as sMO_NO,
xso.created_date as SPLY_ORD_DT,
xso.fk_cust_id as cust_id,
cust.cust_po_no as cust_PO_NO
,(sta.SHIP_TO_ATTN_FIRST_NAME||''||sta.SHIP_TO_ATTN_LAST_NAME) as attention_name,
xsol.CARTONS_ORDERED as SPLY_ORD_QTY,
[code].......
Now the requirement is
One of four conditions are possible for each Supply Reorder Number:
. Both table queries return no records- Populate all the P_SUPPLY_REORDER output fields with nulls
. SUPPLY_ORDER returns a record, but XCOM_ORDER_HEADER returns no records
- Populate output fields with values from the join of SUPPLY_ORDER and SUPPLY_ORDER_LINE.
. SUPPLY_ORDER returns no records, but XCOM_ORDER_HEADER returns one record
- Populate output fields with values from the join of XCOM_ORDER_HEADER and XCOM_ORDER_LINES.
. SUPPLY_ORDER returns a record, and XCOM_ORDER_HEADER returns a record; find out the latest order by comapring max(SPLY_ORD_DT)
from SUPPLY_ORDER with max(CREATED_DATE) from XCOM_ORDER_HEADER.
- If the latest order is in SUPPLY_ORDER, then populate output fields with values from the join of SUPPLY_ORDER and SUPPLY_ORDER_LINE.
- If order dates are equal from both join results, then populate output fields with values from the join of SUPPLY_ORDER and SUPPLY_ORDER_LINE.
- If the latest order is in XCOM_ORDER_HEADER, then populate output fields with values from the join of XCOM_ORDER_HEADER and XCOM_ORDER_LINES.
Question is how can we switch over the queries to pull respective dataset based on these conditions ( checking that which table join is going to return a row and then based upon latest order if both tables return a row) and all this logic as part of single SQL statement that is returned as OUT Ref Cursor.
I have two tables. By joining these two tables, I need to update a field in table1.
UPDATE table1
SET table1.FLAG = 'Fixed'
where table2.lastname = table1.lastname
and table2.status in ('fulltime','parttime')
I keep getting error 'table1.lastname' is invalid identifier.
I can't understand the error message. I made sure that the fields exist.
i have a list of 500 tables. I want to delete data from those tables based on a condition. (Data before 2008 year needs to be deleted). Each table has a column based on which data needs to be deleted. Provide a code which does this efficiently and fast. Bulk collect is preferable.
View 17 Replies View RelatedCREATE TABLE test1
(strt_num NUMBER ,
end_num NUMBER ,
des VARCHAR2(5),
CONSTRAINT pk_strt_num PRIMARY KEY (strt_num)
);
INSERT INTO test1 VALUES (5, 8, 'GC');
INSERT INTO test1 VALUES (10, 25, 'AB');
INSERT INTO test1 VALUES (12, 35, 'PC');
INSERT INTO test1 VALUES (22, 65, 'LJ');
SELECT * FROM test1
STRT_NUM END_NUM DES
-------------- ------------ -------------
5 8 GC
10 25 AB
12 35 PC
22 65 LJ
The requirement is the records should be split based on below conditions
1. Split only those records WHERE (end_num - strt_num) > 10
2. If TRUNC((end_num - strt_num)/10) = n, then n + 1 number of rows should be created for that record
3. While splitting the records,
-> For first record , START_NUM = Original STRT_NUM and END_NUM = START_NUM + 10
-> Second record , STRT_NUM = previous END_NUM + 1 and END_NUM = previous END_NUM + 10
And this should continue for all records except the last record
-> For last record, STRT_NUM = previous END_NUM + 1 AND END_NUM = Original END_NUM
This table has 5 million records. Only for 2000 records (end_num - strt_num) > 10.
Expected Output.
STRT_NUM END_NUM DES
------------- -------- ---------
5 8 GC -- No chage, END_NUM - STRT_NUM < 10
10 20 AB
21 25 AB
12 22 PC
23 32 PC
33 35 PC
22 32 LJ -- STRT_NUM = Original STRT_NUm, END_NUM = STRT_NUM + 10
33 42 LJ -- STRT_NUM = Previous END_NUM + 1, END_NUM = previous END_NUM + 10
43 52 LJ -- STRT_NUM = Previous END_NUM + 1, END_NUM = previous END_NUM + 10
53 62 LJ -- STRT_NUM = Previous END_NUM + 1, END_NUM = previous END_NUM + 10
63 65 LJ -- STRT_NUM = Previous END_NUM + 1, END_NUM = Original END_NUM
,i have a table called travel detail from which i have retrieved few rows based on 1 condition by using LOV and on next few rows modification is allowed. The rows are getting modified but it is also allowing me to enter in next blank row and insert any data in that row.how can i retrieve only that data which is based on the given condition. Further blank rows should not b displayed.
View 2 Replies View RelatedI want to increment a counter in a loop based on a condition.
Here is how my xml looks like
<result>
<resultset id=1>
<value>
[Code]....
I need to look at each and every resultset and check if the value is >400 and if it is then display some text. Something like this
<outputvalue>
Yes, there is a value greater than 400
</outputvalue>
In my XSL, I declared a variable called count with value 0. I created a for-loop which goes through these results. Then inside the loop there is a condition to cehck if the value is > 400. If the value is >400, then the counter is incremented.
````````````````````
<outputvalue>
<xsl:variable name="Count" select="0"></xsl:variable>
<xsl:for-each select="/results/resultset">
[Code]....
There is a problem with the above code is that result is like this
<outputvalue>
*1*
Yes there is a resultset with greater than 400
</outputvalue>
Is there a way I can just remove the character 1 from the output? Or is there a better way to increment?
while replicating form mssql 2005 it is entering space for null in oracle clob col.so i wanted to know.
1)can check constaint modify the content of column on which it is defined?
like i want to enter null in a column , if entered date is greater than current date else the entered date.i do not want to use triggers or client side script.
find the logic to query data based on a condition like..I am having a table dummy
USERNAME RESP_NAME FUNC_NAME MESSAGE
-------- --------- ------------------ ------------
TEST1 SYS_ADMIN CONCURRENT_PROGRAM AAAAAAAAAAAA
TEST1 SYS_ADMIN % BBBBBBBBBBBB
TEST1 % CONCURRENT_PROGRAM CCCCCCCCCCCC
TEST1 % % DDDDDDDDDDDD
% SYS_ADMIN CONCURRENT_PROGRAM EEEEEEEEEEEE
% SYS_ADMIN % FFFFFFFFFFFF
% % CONCURRENT_PROGRAM GGGGGGGGGGGG
% % % HHHHHHHHHHHH
The above 8 are the possible ways to key in the data using a form.The logic is like based on a particular condition the message should display in the report.If they specify a particular USER and RESP_NAME and FUNC_NAME then it should display AAAAAAAAAAA (This should take priority first). The priority is in order the default should be the last one.
I have more than 100 records in CSV format. I have to import these records to a particular table which already contains data. I have to do a multiple update at a time, based on the condition . ie., if field1 is '1' then update field2 as 'A0001' and if field1 is '5' then update field2 as 'A0007' . The values are not in an order. Is it possible.
View 1 Replies View RelatedI have two tables as
Table LEAVE
Column Type Null Description
APP_NO Number(6,0) Not Null PK Leave Application Number
ECN Number(6,0) Not Null FK Employee Code Number
APP_Date Date Not Null Date of Application
From_Date Date Not Null Date from which the leave starts
TO_Date Date Not Null Date upto which the current application leave remains i.e. end of leave applied for date
NO_OF_Days Number(2,0) Not Null Difference between TO_Date and From_date
LEAVE_TYPE VARCHAR2(3) Not Null Can be one of SL, CL, LWP or LTA
Status VARCHAR2(25) Not Null Can be one of Saved, Rejected or Approved
Remark VARCHAR2(100) Nullable Reason to be put if status is rejected
[code]....
What I really want to do is that when a record is inserted in the LEAVES table (an application for leave is submitted by any employee and if it is approved) then I want to update the _USED values of the corresponding LEAVE_TYPE in the LEAVEENTITLE table which holds values of types of leaves entitled to employee.
For example if 3 rows are inserted in the LEAVES table as
INSERT INTO LEAVES (APP_NO,ECN,FROM_DATE,TO_DATE,APP_DATE,NO_OF_DAYS,LEAVE_TYPE,STATUS,REMARK)
(1,1234,'2012-01-01','2012-01-05','2012- 01-01',5,'SL','APPROVED',null);
INSERT INTO LEAVES (APP_NO,ECN,FROM_DATE,TO_DATE,APP_DATE,NO_OF_DAYS,LEAVE_TYPE,STATUS,REMARK)
(2,1235,'2012-01-01','2012-01-05','2012- 01-01',5,'CL','SAVED',null);
INSERT INTO LEAVES (APP_NO,ECN,FROM_DATE,TO_DATE,APP_DATE,NO_OF_DAYS,LEAVE_TYPE,STATUS,REMARK)
(3,1236,'2012-01-01','2012-01-05','2012- 01-01',5,'LTA','REJECTED','Clash with the annual meet, revise dates');
Then the value of SL_USED in the LEAVEENTITLE table of record corresponding to the ECN = 1234 should be updated with +5 and naturally the SL_ UNUSED value of the record should be updated as SL_ENTITLED - SL_USED. For the APP_NO 2 and 3 none of the values in LEAVEENTITLE should be updated as the STATUS is not 'APPROVED'
I tried with the following trigger, but is compiling with a warning (not showing what the warning is)
CREATE OR REPLACE TRIGGER leaveentitle
AFTER INSERT ON LEAVES
FOR EACH ROW
BEGIN
UPDATE LEAVEENTITLE LVE
SET LVE.SL_USED = SL_USED+(CASE
WHEN :NEW.LEAVE_TYPE = 'SL'&& NEW.STATUS='APPROVED'
THEN :NEW.NO_OF_DAYS
SL_UNUSED=SL_ENTITLED - SL_USED
ELSE 0
END),
[code]....
The attachment contains the table info. The condition is that when there are childer for the master ,the master record shd be negated . Excuse me if this very easy. Example -DEL HAS children so the record with DEL and DEL SHD not be in the result query. Example -RAG HAS NO children. so the MASTER record should be taken.
Input
COL1COL2COL3COL4
MASTERDELDELP1
MASTERDELJANP2
MASTERDELAGRP3
MASTERRAGRAGP1
MASTERCENAPTP2
MASTERRUGRUGP1
My expected output
COL1COL2COL3COL4
MASTERDELJANP2
MASTERDELAGRP3
MASTERRAGRAGP1
MASTERCENAPTP2
MASTERRUGRUGP1
i have used radio button under dynamic conditions for an interactive report.eg: radio button values are like a) front end b)middlware c)back end.so based on the selected value of the radio button, interactive report appears. and each fields in radio button have separate set of users. now my issue is,based on the user logging in, the default value should set up while the page is loaded...[i.e... if a front end user logs in, the default value of tat radio button shd be front end...]
View 5 Replies View RelatedI have made a travel booking system which comprises of 3 forms
1)Travel Booking form
2)Reservation Form
3)Cancellation Form
Under one booking number i can add multiple users in which they can have there multiple travels.
Users can cancel there individual travels under a prescribe booking number which on doing the Cancel flag turns to 'Y'.
What i want is, If a user is cancelling his/her travel under any booking number then while retriving the records in Travel Booking form, the travels which are cancelled should not be in enable mode.
For one user there can be 4 travels out of which 2 are cancelled, how can i track only those records whoes cancel flag is set to Y. some logic to find it out. Else can i use :system.cursor_record. If yes, How to use it for this system.