SQL & PL/SQL :: Dynamic Column Creation / Create Column Based On Number Of Child In Hierarchy
Oct 15, 2013
I have one hirarchical query which return the parent to child hirarch level data. it has 11 level child data. i want to create column based on number of child in hirarchy. though i know it is 11 but it can change also.Is there any way i can create the column dynamically
ORG_UNITCOST_CENTERORG_UNIT_NAMEPARENT_ORG_UNITLLSYS_CONNECT_BY_PATH(ORG_UNIT,'/')
500171960000022000Managing Director - LUL500169965/00000001/50000001/50017588/50016996/50017196
500018370000021241FSO500171966/00000001/50000001/50017588/50016996/50017196/50001837
502894940000021241Knowledge Management500018377/00000001/50000001/50017588/50016996/50017196/50001837/50289494
508014980000021241Finance500018377/00000001/50000001/50017588/50016996/50017196/50001837/50801498
View 1 Replies
ADVERTISEMENT
Apr 20, 2013
I have a query that should return count the number of rows depending on the value of SLOT. The expected result will be like this:
WIPDATAVALUE SLOT N M
1-2 TRALTEST43S1 1 3
1-2 TRALTEST43S1 2 3
3 TRALTEST43S1 3 3
4-6 TRALTEST43S2 1 4
4-6 TRALTEST43S2 2 4
4-6 TRALTEST43S2 3 4
7 TRALTEST43S2 4 4
The M column is used to count the total number of occurrences of a SLOT. Now, as for the N field, this is used to count the occurrence of the SLOT. In my example for the SLOT TRALTEST43S1, it has three occurrences so M will be 3. Why 3, is because of the WIPDATAVALUE. The WIPDATAVALUE of TRALTEST43S1 is 1-2 and 3. 1-2 WIPDATAVALUE signifies two occurrences (one to two) and 3 signifies only one occurrence. As for N, it should just count the number of occurrence. To further explain, see below:
WIPDATAVALUE SLOT N M
1-2 TRALTEST43S1 1 3 -> First occurrence in the total of 3
1-2 TRALTEST43S1 2 3 -> Second occurrence in the total of 3
3 TRALTEST43S1 3 3 -> Third occurrence in the total of 3
4-6 TRALTEST43S2 1 4 -> First occurrence in the total of 4
4-6 TRALTEST43S2 2 4 -> Second occurrence in the total of 4
4-6 TRALTEST43S2 3 4 -> Third occurrence in the total of 4
7 TRALTEST43S12 4 4 -> Fourth occurrence in the total of 4
This is the query that I have so far:
SELECT DISTINCT
WIPDATAVALUE, SLOT
, LEVEL AS n
, m
FROM
(
SELECT
WIPDATAVALUE
, SLOT
, (dulo - una) + 1 AS m
[code]....
I think that my current query is basing its M and N results on WIPDATAVALUE and not the SLOT that is why I get the wrong output. I have also tried to use the WITH Statement and it works well but unfortunately, our system cant accept subquery factoring.
View 2 Replies
View Related
Apr 20, 2013
here on your forum but has been following several threads ever since.So anyway here is the thing, I have a query that should return count the number of rows depending on the value of SLOT. Something like this:
WIPDATAVALUE SLOT N M
1-2 TRALTEST43S1 1 3
1-2 TRALTEST43S1 2 3
3 TRALTEST43S1 3 3
4-6 TRALTEST43S2 1 4
4-6 TRALTEST43S2 2 4
4-6 TRALTEST43S2 3 4
7 TRALTEST43S2 4 4-----
As you can see above, on the SLOT TRALTEST43S1, there are three occurrences so M (Total number of occurrences) should be three and that column N should count it. Same goes with the SLOT TRALTEST43S2. This is the query that I have so far:
SELECT DISTINCT
WIPDATAVALUE, SLOT
, LEVEL AS n
, m
FROM
(
[code]...
I think that my current query is basing its M and N results on WIPDATAVALUE and not the SLOT that is why I get the wrong output. I have also tried to use the WITH Statement and it works well but unfortunately, our system cant accept subquery factoring.
View 23 Replies
View Related
Jun 26, 2012
CREATE TABLE DAN_DATES
(ID VARCHAR2(12),
YEAR VARCHAR2(,
TERM VARCHAR2(,
START_DATE VARCHAR2(12))
INSERT INTO DAN_DATES (ID,YEAR,TERM,START_DATE) VALUES ('1','2012','1201',to_date('20120227','YYYYMMDD'));
INSERT INTO DAN_DATES (ID,YEAR,TERM,START_DATE) VALUES ('1','2012','1201',to_date('20120626','YYYYMMDD'));
INSERT INTO DAN_DATES (ID,YEAR,TERM,START_DATE) VALUES ('2','2011','1101',to_date('20110226','YYYYMMDD'));
INSERT INTO DAN_DATES (ID,YEAR,TERM,START_DATE) VALUES ('2','2011','1101',to_date('20110725','YYYYMMDD'));
INSERT INTO DAN_DATES (ID,YEAR,TERM,START_DATE) VALUES ('2','2012','1201',to_date('20120227','YYYYMMDD'));
Want to take the Start_Date for that year, CREATE A NEW COLUMN and place that START_DATE (which is row 1 for the year (min)) in it. So for ID 1 TERM is 1201 and 1202 BUT we want the top start date (earliest start date) and CREATE a clumn (NEW_START_DATE) and place that date in there wherever year is 2012.
I want to get
IDYEARTERMSTART_DATEMIN_DATE
12012120127-Feb-1227-Feb-12
12012120126-Jun-1227-Feb-12
22011110126-Feb-1126-Feb-11
22011110125-Jul-1126-Feb-11
22011110126-Sep-1126-Feb-11
22012120227-Feb-1227-Feb-12
View 10 Replies
View Related
Jul 30, 2012
My DBA gave me a table with only one date column say Table1.Date. Its in the format of Date and say it is = 7/23/2012.
Now i have to create my own Reporting View(which is used for reporting) based on that date column like below:
It should be a column with values in the following format =
2012-07
2012-06
2012-05 etc....upto
2010-01
So i started out my creating like this:
select
to_char(Table1.Date,'yyyy-mm')
from Table1
Union
[Code]....
.and so on till i get 2010-01.
there has to be a better way to do this.
View 7 Replies
View Related
Feb 17, 2011
My requirement is to concatenate two column values and place them in a new column.I have done it using self join but it limits the purpose,meaning when I have more than 2 values for grouped columns then it won't work.How to make this dynamic,so that for any number of columns grouped,I can concatenate.
SELECT a.co_nm, a.mnfst_nr, a.mnfst_qty,
a.mnfst_nr || ':' || a.mnfst_qty || ';' || b.mnfst_nr || ':'
|| b.mnfst_qty
FROM vw_acao_critical a JOIN vw_acao_critical b
ON a.co_nm = b.co_nm AND a.mnfst_nr = b.mnfst_nr
[code]......
What will be the case when I need to concatenate for more number of values.
like when co_nm has three bahs and manfst_nr and manfst_qty has 3 values for each for bah.and if three are having same_mnfst nr then I should use something dynamic.how to achieve this.
View 10 Replies
View Related
Feb 9, 2011
I need to create a materialized view with a clob column based on a varchar2 column of a table.This is because in the mv the clob column data gets appended one after another.
View 2 Replies
View Related
Feb 23, 2013
I Have an apex page that display a modal window utilizing jquery. In the modal window I have a classic report with a link column that I want to capture its click event.
I was thinking I could create a dynamic action with selection type=jquery selector. Not for sure if I need to do anything on link column and do not know the syntax jquery selector.
View 5 Replies
View Related
Dec 20, 2012
way to achieve the below logic.
SQL to pick up parent child relationship within same table with a certain logic.
Example:
mod_product_numberProduct_Hierarchy
H555888 PH05678
H888987 H555888
H8889 H555888
[code]...
Example: I expect the rows with H8889,H9955 & P6666 & P5555 to be sub-category values value for product hierarchy H555888.
If there are rows with H8888987 as Product_hierarchy, we will pull up those rows too for product hierarchy H555888. The extra condition is we drill down only on 7 character mod_prod_number not on 5 character mod_prod_number. We pull out all sub category mod_prod_number for all distinct Product hierarchy.
View 11 Replies
View Related
May 15, 2011
i have two questions.
(1) how can i fill some value in a table column based on some existing column value automatically without user intervention. my actual problem is i have 'expiry date' column and 'status'. the 'status' column should get filled automatically based on the current system date. ex: if expiry date is '25-Apr-2011' and current date is '14-May-2011', then status should be filled as 'EXPIRED'
(2)hOw can i build 'select' query in a report (report 6i) so that it will show me list of items 'EXPIRED' or 'NOT EXPIRED' or both expired and not expired separately in a single report based on user choice. 'EXPIRED' & 'NOT EXPIRED' can be taken from the above question no. 1.
View 3 Replies
View Related
Sep 10, 2010
I am trying to create a trigger which changes the content of one column based on the information within another column.
For Example, if the 'ITEMQUANTITY' field drops below 1 then I want the STATUS column to say 'Out Of Stock'.
View 23 Replies
View Related
Feb 11, 2013
We are using Oracle 11g with Apex 3.2 on AIX. We are reporting data from customer satisfaction surveys. I'm using the following sql to create my report
<code>select * from(
select month,'Overall Satisfaction' as q_group, 1 as srt,Overall Satisfaction,site,
case when count(*) < 31 then '*' else
round((sum(ttos)/count(*))*100,0)||'/'|round((sum(bfos)/count(*))*100,0)||'/'||count(*) end ospct
from v_XXX_report a,(select distinct month_dt month from v_XXX_report) b
where Overall_Satisfaction is not null and year_dt = 2012
[Code]....
The problem is that site is not allways present and sometimes I have other variables in addition to site. This creates a situation where the month columns will not allways appear at the same column number. For example, When I run this query as is then the "JAN" column is Col3 (first column is a break, col2 is not shown). When I run this query without site then "JAN" is the second column. I would like to create column links for the "JAN" - "DEC" columns but not for any other columns.
Another issue - in the column link creation screen I can create up to 3 variables that I can pass to the next page. Since my query is a pivot I'm uncertain how to pass the column heading or the row value (for col2)
ie
Overall Satisfaction JAN FEB MAR APR MAY ...
Overall Satisfaction 12/12/200 12/12/210 12/12/220 12/12/230 12/12/240...
Recommend 12/12/200 12/12/210 12/12/220 12/12/230 12/12/240...
etc.
So if I clicked on the values at Recommend:FEB how can I get "Recommend" and "FEB" into variables that I can use on the next page? I've tried #column_name#, #month#, #q_name# and #APEX_APPLICATION.G_F10# but no luck.
View 0 Replies
View Related
Mar 21, 2013
I have a table where i have description column which free text column, the data in description column is seperated and i want to corvert 1 row data in multiple rows dependeing on the number of words.
eg
id description
78664 Pumps Alarm from CAMS RTU154
In the above example this column has 5 word so i want data in 5 rows like below
78664 Pumps
78664 Alarm
78664 from
78664 CAMS
78664 RTU154
This column data can be varied from 1 to any number of words.
View 11 Replies
View Related
Jul 23, 2013
is there some performance/access difference between a bitmap index on a number column and char(1) column? Both columns are not null with a default value.My application has a querie like this:
select ass.column20, ass.column30from table_a pucinner join table_b asson ass.column1 = puc.column1where pc.column_char = 'S'and ass.column_char02 = 'P'
If I create a bitmap index on column "column_char", the access plan is not changed. But changing the column datatype to number(1) and obviously the values, the index is accessed and the cost decreases.This table has 4.000.000 rows. Oracle 11.2.0.2SO
View 7 Replies
View Related
Dec 25, 2012
I have a partitioned table with ~50 million rows that was setup with a number(10) instead of a date column. All the data in the table is ALWATS in this format YYYYMMDD
CREATE TABLE T1.monthly
(
SEQ_NUM NUMBER(10) NOT NULL,
DAY_DK NUMBER(10) NOT NULL
)
TABLESPACE USERS
PCTUSED 0
PCTFREE 10
[code]........
some sample data
SEQ_NUM DAY_DK
---------- ----------
990 20121225
991 20121225
992 20121225
993 20121225
994 20121225
995 20121225
996 20121225
997 20121225
998 20121225
999 20121225
When I use the exchange partition method the parition is able to move the data from "monthly" table to "mth" table.
desc t1.mth; ### my temorary table
Name Null? Type
----------------------------------------- -------- ----------------------------
SEQ_NUM NUMBER(10)
DAY_DK NUMBER(10)
Than when I try to alter my temp table "mth". I get an error table must be empty to change column types.
alter table n546830.mth modify (DAY_DK date);
Next I tried making my temporary table "mth" a date column. When I an the exchange partition command I get the following error:
alter table t1.monthly exchange partition DEC_2012
with table t1.mth without validation;
alter table n546830.monthly exchange partition DEC_2012 with table n546830.mth without validation
*
ERROR at line 1:
ORA-14097: column type or size mismatch in ALTER TABLE EXCHANGE PARTITION
Method I can use to convert a number(10) to date column and keep the information in a table. Note, I don't care about HH:MM:SS as I never had that information to begin with and would be happy to set that part of the date column to all zeroes "00:00:00"
View 12 Replies
View Related
Oct 1, 2011
I found nothing in SQL (all in PL/SQL).I have a table:
create table Parent (pk_id number primary key); --which is filled using sequence seq_Parent.
And I have a child table:
create table Child (rRef number, fk_parent number primary key (rRef, fk_parent);
that I need to insert into Child using seq_parent but I want to insert the same sequence for each group of rRef. I dont know how to do that using SQL not PL/SQL.
View 7 Replies
View Related
May 6, 2010
I want to create a table, whose first column , patient_id, should be a sequence.
View 9 Replies
View Related
Oct 10, 2013
We have a table called address and having the address fields and city ,state etc. The table will store huge amount of data .We need to query on the table. I would like to know how can we fasten the query and improve the performance of the query by creating index on these columns...Query is given below . note that the nullable columns can have data
SELECT *
FROM address
WHERE address1 = 'a'
[Code]....
View 9 Replies
View Related
Jan 11, 2011
I want get dynamic column names and its corresponding values...Consider the below sample code
CREATE TABLE LECTURER1
( ID NUMBER(5,0),
FIRST_NAME VARCHAR2(20),
LAST_NAME VARCHAR2(20),
MAJOR VARCHAR2(30),
CURRENT_CREDITS NUMBER(3,0),
PRIMARY KEY (ID));
[code]....
get the dynamic column values.
View 7 Replies
View Related
Nov 17, 2011
How do I add a column (Status) to a select query based on the data returned.
Select Col1, Col2
from
Table 1, Table 2, Table 3
Where
Table 1.Key1 = Table 1.Key1 and
Table 2.Key1 = Table 3.Key1 and
Table 1.Col1 in ('xyz','yty','ttr')
Output Expected:
Col1 Col2 Col3(Status)
xyx 1mst Sucess
yty Null No Data Found
ttr Null No Data Found
The Col1 value yty and ttr does not exist in the database
View 2 Replies
View Related
Apr 26, 2010
I have a stored procedure that updates a series of columns (set at varchar(500) just to ensure there is ample space for whatever data is inserted into it) .Once it has updated though I've wanted to trim the column width down to the maximum size of the column value. I determine the max size of the column length and use that in a pl/sql command to ensure the width isn't smaller than the largest data entry.
When I try to do this I get the following message:
ORA-01441: cannot decrease column length because some value is too big
Now after hunting this down it seems as though you cannot decrease the size of a column once data has been inserted into it.
Any success in reducing the column width of a table that has data in it?
Why do I need to do this? I am exporting this table from Oracle into a propriety application and I am trying to reduce teh size of the export table by removing any unecessary space the unused spaces in the column. This will benefit the local app in addition to reducing the impact on the filesystem storage.
View 7 Replies
View Related
Jul 26, 2004
I have column names stored in a table(say t1).
Inside a trigger I have to dynamically get the : old. values for only these columns.
This I need because during update trigger on a table (say t2) I am supposed pickup the coumn names stored in t1 and get the : old values of only these columns to insert into a new table .
View 5 Replies
View Related
Jan 23, 2012
i have creatd view,in which i need to show the entry of year in column wise,though the data is in row /record wise.By iteration i can manipulate the year in decode function like " (DECODE(a.Year,(select distinct max(year)-1 from BI_BALANCE_SHEET), a.Balance))",but is there any way to chachge the alias name /column name,here is the query
select
SUM(DECODE(a.Year,(select distinct max(year)-1 from BI_BALANCE_SHEET), a.Balance)) as year2010,
SUM(DECODE(a.Year,(select distinct max(year)from BI_BALANCE_SHEET) , a.Balance))as Year2011
from DEMO a
View 4 Replies
View Related
Oct 15, 2013
I need to have columns dynamically defined in my SQL based on the column values in the table.
Selct emp_no,dept_no,grade from emp;
emp_no dept_no grade
----------------------------------
1 10 A
2 20 B
3 20 A
4 10 C
5 10 A
6 20 C
7 10 B
8 20 C
I need the output as
dept_no Count_A Count_B Count_C
---------------------------------------------
10 2 1 1
20 1 1 2
I can write hard coded sql to get this output but I need the count columns to be generated dynamically as there could be new entries in the grade column later. For example if there is a entry as D for the grade column my SQL should have a column count_D.
View 3 Replies
View Related
May 30, 2012
I have two string one is comma separated values as a column name and another string which is having the comma separated value corresponding to the column name.
Example:
string1:='col1,col2,col3'
string2:='1,aaple,'2-jul-75'
now i have to create and run a query which will be like that
select * from emp where col1=1 and col2='apple' and col3='2-jul-75'
View 6 Replies
View Related
May 18, 2010
converting Rows to Column for a specific group.
Following is the query
SELECT Lpad(papf.employee_number, 6, '0') "File#",
papf.full_name,
Decode(ppee.processing_type, 'R', Decode(ppee.element_name,
'Regular Wages USD', peev.screen_entry_value,
'Regular Salary USD', Round(peev.screen_entry_value / 26, 2),
0),
[Code]...
Which gives me out put as
Example 1
Employee Number Name Value Rate Type Type Assignment Id
-----------------------------------------------------------------
4 Employee 1 800 N 5 Yr Bonus 64
4 Employee 1 1063 N 6 Months Bouns 64
4 Employee 1 24.04 H Reg Hourly Sal 64
5 Employee 2 6923.08 S Reg Sal 65
6 Employee 3 5961.54 S Reg Sal 66
6 Employee 3 15000 N 6 Months Bouns 66
I want to convert above out to look like following
Emp Num Name Value Rate Type Type Val 1 Rate Type 1 Type 1 Value 2 Rate Type 2 Type 2 Assignt Id
-------------------------------------------------------------------------------------------------------------------
4 Employee 1 24.04 H Reg Hourly Sal 800 N 5 Yr Bon 1063 N 6 Mon Bon 64
5 Employee 2 6923.08 S Reg Sal 65
6 Employee 3 5961.54 S Reg Sal 15000 N 6 MontBon 66
Example of Query Output 2.
Employee Number Name Value Rate Type Type Assignment Id
--------------------------------------------------------------------------------
4 Employee 1 800 N 5 Yr Bonus 64
4 Employee 1 1063 N 6 Months Bouns 64
4 Employee 1 1345 N Patent Bonus 64
4 Employee 1 24.04 H Reg Hourly Sal 64
5 Employee 2 6923.08 S Reg Sal 65
6 Employee 3 5961.54 S Reg Sal 66
6 Employee 3 15000 N 6 Months Bouns 66
Desired Output from Above Query. As you can see column have increased as one more row for same employee has increased
ENu Nm Val RTy Ty Val1 RTy1 Ty1 Val2 RTy2 Ty2 Val3 RTy3 Ty3 AsgId
-------------------------------------------------------------------------------------------------------------------
4 E1 24.04 H Reg Hour Sal 1063 N 6 Mon Bns 1345 N Pat Bon 800 N 5YB 64
5 E2 6923.08 S Reg Sal 65
6 E3 5961.54 S Reg Sal 15000 N 6 Mos Bns 66
View 7 Replies
View Related
Nov 3, 2010
I have a Strange requirement from client data is loaded from excel to Oracle Table- TST_TBL (with Header in Excel)
CREATE TABLE TST_TBL
(
JOB_DETAIL_ID NUMBER,
SHEET_NAME VARCHAR2(100 BYTE),
COL1 VARCHAR2(400 BYTE),
COL2 VARCHAR2(400 BYTE),
COL3 VARCHAR2(400 BYTE),
COL4 VARCHAR2(400 BYTE),
[Code]...
After the Data is loaded, we see data look like the above.
(1) Always COL3 column name have data value as 'Gen1' which is the indication for us from where data starts. But Gen1, Gen2, Gen3 etc... is dynamic. ie. This month we get gen1 and gen2 columns followed by null value in a column. Next month we get gen1,2,3,4 followed by null column.
(2) Null Column indicate us that there is a break in the column.
(3) Then next we need to look for next group of data (Monthly) and then insert into the same table again with different sheet_name column.
(4) Next for Quater and then YTD. None of the column Values are fixed and its all dynamic.
If you load the below data, you will come to know what i am looking for. I tried using UNPIVOT. But couldnt able to achieve it. Is there an option to do it in sigle query? or Do I need to go for Stored Procedure?
Insert into TST_TBL
(JOB_DETAIL_ID, SHEET_NAME, COL1, COL2, COL3,
COL4)
Values
(100, 'Wire_1', 'Gen1',
'Gen2', 'Gen3', 'Gen4');
Insert into TST_TBL
[Code]....
View 1 Replies
View Related
Sep 1, 2012
So, for lack of a better way to explain it, I need to do the following.
I need a EXECUTE IMMEDIATE to be able to use a CURSOR but its saying its not declared. Is their a way to pass the cursor so a Execute Immediate can use it...
V_SQL := 'REPLACE(V_DATA,'TEST',CUR_DATA.'||V_FIELD||');';
EXECUTE IMMEDIATE (V_SQL);
I know thats just a small part... but it shows the end goal. I need to append a VARCHAR that has the COLUMN NAME I need from the CURSOR. CUR_DATA is the open cursor. V_DATA is just a VARCHAR with text in it.
View 6 Replies
View Related
Feb 8, 2013
I have a problem with Dynamic SQL.
I have written an SQL which will dynamically generate the Select statement with from and where clause in it.
But that select statement when executed will get me hundreds of rows and i want to insert each row separately into one more table.
For that i have used a ref cursor to open and insert the table.
In the select list the column names will also be as follows: COLUMN1, COLUMN2, COLUMN3,....COLUMNn
find below the sample code:
TYPE ref_csr IS REF CURSOR;
insert_csr ref_csr;
v_select VARCHAR2 (4000) := NULL;
v_table VARCHAR2 (4000) := NULL;
v_where VARCHAR2 (4000) := NULL;
v_ins_tab VARCHAR2 (4000) := NULL;
v_insert VARCHAR2 (4000) := NULL;
v_ins_query VARCHAR2 (4000) := NULL;
[Code]...
How to fetch the column names here
|| ');';
EXECUTE IMMEDIATE v_ins_query;
END LOOP;
View 8 Replies
View Related
Mar 3, 2011
How to get the max row based on a value in a column
View 1 Replies
View Related
