Employee Number Name Value Rate Type Type Assignment Id
-----------------------------------------------------------------
4 Employee 1 800 N 5 Yr Bonus 64
4 Employee 1 1063 N 6 Months Bouns 64
4 Employee 1 24.04 H Reg Hourly Sal 64
5 Employee 2 6923.08 S Reg Sal 65
6 Employee 3 5961.54 S Reg Sal 66
6 Employee 3 15000 N 6 Months Bouns 66
I want to convert above out to look like following
Emp Num Name Value Rate Type Type Val 1 Rate Type 1 Type 1 Value 2 Rate Type 2 Type 2 Assignt Id
-------------------------------------------------------------------------------------------------------------------
4 Employee 1 24.04 H Reg Hourly Sal 800 N 5 Yr Bon 1063 N 6 Mon Bon 64
5 Employee 2 6923.08 S Reg Sal 65
6 Employee 3 5961.54 S Reg Sal 15000 N 6 MontBon 66
Example of Query Output 2.
Employee Number Name Value Rate Type Type Assignment Id
--------------------------------------------------------------------------------
4 Employee 1 800 N 5 Yr Bonus 64
4 Employee 1 1063 N 6 Months Bouns 64
4 Employee 1 1345 N Patent Bonus 64
4 Employee 1 24.04 H Reg Hourly Sal 64
5 Employee 2 6923.08 S Reg Sal 65
6 Employee 3 5961.54 S Reg Sal 66
6 Employee 3 15000 N 6 Months Bouns 66
Desired Output from Above Query. As you can see column have increased as one more row for same employee has increased
ENu Nm Val RTy Ty Val1 RTy1 Ty1 Val2 RTy2 Ty2 Val3 RTy3 Ty3 AsgId
-------------------------------------------------------------------------------------------------------------------
4 E1 24.04 H Reg Hour Sal 1063 N 6 Mon Bns 1345 N Pat Bon 800 N 5YB 64
5 E2 6923.08 S Reg Sal 65
6 E3 5961.54 S Reg Sal 15000 N 6 Mos Bns 66
I have one hirarchical query which return the parent to child hirarch level data. it has 11 level child data. i want to create column based on number of child in hirarchy. though i know it is 11 but it can change also.Is there any way i can create the column dynamically
I need to transpose this table to below one. But since my rows in 1 table is dynamic and it will increment each week and month I couldn't get a correct result from unpivot.
create table src(id number,val number,data varchar2(100)) insert into src values (1,1,'SUN'); insert into src values (2,2,'WED'); insert into src values (3,3,'MON'); create table trg(id number,val number,data varchar2(100)) required rows to be inserted in the target table.
insert into trg values (1,1,'SUNDAY'); insert into trg values (2,0,NULL); insert into trg values (2,0,NULL); insert into trg values (3,0,NULL); insert into trg values (3,0,NULL);insert into trg values (3,0,NULL);
{code} based on the column value of the source table src's column val , i need to populate my target table trg . If the value of val is 1 then only one target row is created in the target .If the value of val in the source table src is 2 then the target is populated with 2 rows .The values of the target columns are mapped as follow:
1)id -as it is
2)val - if the val of src is 1 then map the val as it is .If the value of val is more than one then create as many rows as the value of val ,id will be as it is and the value of val and data will be null
3)data - if the val of src is 1 then expand the abbreviation else null .
I have a stored procedure that updates a series of columns (set at varchar(500) just to ensure there is ample space for whatever data is inserted into it) .Once it has updated though I've wanted to trim the column width down to the maximum size of the column value. I determine the max size of the column length and use that in a pl/sql command to ensure the width isn't smaller than the largest data entry.
When I try to do this I get the following message:
ORA-01441: cannot decrease column length because some value is too big
Now after hunting this down it seems as though you cannot decrease the size of a column once data has been inserted into it.
Any success in reducing the column width of a table that has data in it?
Why do I need to do this? I am exporting this table from Oracle into a propriety application and I am trying to reduce teh size of the export table by removing any unecessary space the unused spaces in the column. This will benefit the local app in addition to reducing the impact on the filesystem storage.
Inside a trigger I have to dynamically get the : old. values for only these columns.
This I need because during update trigger on a table (say t2) I am supposed pickup the coumn names stored in t1 and get the : old values of only these columns to insert into a new table .
i have creatd view,in which i need to show the entry of year in column wise,though the data is in row /record wise.By iteration i can manipulate the year in decode function like " (DECODE(a.Year,(select distinct max(year)-1 from BI_BALANCE_SHEET), a.Balance))",but is there any way to chachge the alias name /column name,here is the query
select SUM(DECODE(a.Year,(select distinct max(year)-1 from BI_BALANCE_SHEET), a.Balance)) as year2010, SUM(DECODE(a.Year,(select distinct max(year)from BI_BALANCE_SHEET) , a.Balance))as Year2011 from DEMO a
I need to have columns dynamically defined in my SQL based on the column values in the table.
Selct emp_no,dept_no,grade from emp; emp_no dept_no grade ---------------------------------- 1 10 A 2 20 B 3 20 A 4 10 C 5 10 A 6 20 C 7 10 B 8 20 C
I need the output as dept_no Count_A Count_B Count_C --------------------------------------------- 10 2 1 1 20 1 1 2
I can write hard coded sql to get this output but I need the count columns to be generated dynamically as there could be new entries in the grade column later. For example if there is a entry as D for the grade column my SQL should have a column count_D.
I have two string one is comma separated values as a column name and another string which is having the comma separated value corresponding to the column name.
After the Data is loaded, we see data look like the above.
(1) Always COL3 column name have data value as 'Gen1' which is the indication for us from where data starts. But Gen1, Gen2, Gen3 etc... is dynamic. ie. This month we get gen1 and gen2 columns followed by null value in a column. Next month we get gen1,2,3,4 followed by null column. (2) Null Column indicate us that there is a break in the column. (3) Then next we need to look for next group of data (Monthly) and then insert into the same table again with different sheet_name column. (4) Next for Quater and then YTD. None of the column Values are fixed and its all dynamic.
If you load the below data, you will come to know what i am looking for. I tried using UNPIVOT. But couldnt able to achieve it. Is there an option to do it in sigle query? or Do I need to go for Stored Procedure?
Insert into TST_TBL (JOB_DETAIL_ID, SHEET_NAME, COL1, COL2, COL3, COL4) Values (100, 'Wire_1', 'Gen1', 'Gen2', 'Gen3', 'Gen4'); Insert into TST_TBL
So, for lack of a better way to explain it, I need to do the following.
I need a EXECUTE IMMEDIATE to be able to use a CURSOR but its saying its not declared. Is their a way to pass the cursor so a Execute Immediate can use it...
I know thats just a small part... but it shows the end goal. I need to append a VARCHAR that has the COLUMN NAME I need from the CURSOR. CUR_DATA is the open cursor. V_DATA is just a VARCHAR with text in it.
I have written an SQL which will dynamically generate the Select statement with from and where clause in it. But that select statement when executed will get me hundreds of rows and i want to insert each row separately into one more table.
For that i have used a ref cursor to open and insert the table.
In the select list the column names will also be as follows: COLUMN1, COLUMN2, COLUMN3,....COLUMNn
find below the sample
TYPE ref_csr IS REF CURSOR; insert_csr ref_csr; v_select VARCHAR2 (4000) := NULL;
Depending on the no. of distinct dates in table 1 i have to make those many columns in table 2. I m trying to write a Query in SQL. If its not possible in SQL give me PL/SQL procedure.
i used sql loader to import data from csv file to my db.but every time the columns places are changed.o i need dynamic way to insert data into correct column in the table.
in csv file contains column name and i insert this data to temp table, after that i want to read data over column name.also i read the column names from (All_Tab_Columns) to make combination of column name between temp table and All_Tab_Columns table to insert data to right place...
I have an interactive report which contains the columns like
<li>empno <li>Name
In the above i have "empno" with a column alignment of left and a "Name" with a column alignment of left.
Whether it is possible to override the data alignment that we set in the report according to the value of the application item like
If my application item value is US, then i need the column alignment of both the column"empno" and "Name" to be left and if my application item value is AR, then i need the column alignment of both the column "empno" and "Name" to be right. Whether is it possible to achieve the dynamic alignment to the report data of both the columns "empno" and "Name" according to the application page item value.And also in the case of page item i have a page item with a name P1_NAME in which it has a Element Horizontal/Vertical alignment to left.
I need that element alignment of the page item to behave dynamically according to the application page item, like if the application page item is US then the element alignment of the page item has to be left and if the application page item is AR then the element alignment of the page item has to be right.
I Have an apex page that display a modal window utilizing jquery. In the modal window I have a classic report with a link column that I want to capture its click event.
I was thinking I could create a dynamic action with selection type=jquery selector. Not for sure if I need to do anything on link column and do not know the syntax jquery selector.
There are millions of DISTINCT ID values in TABLE_1 and corresponding to each ID there are some values for all the days of a month. I need to insert these values in TABLE_2 in the above format.
Calculating the difference between the two rows of same columns? Example of my Scenario is as follows
I have a table as shown below, there are checks thats has been issued per week (to tell how its been issued per week ,if you see the week number ,there is a change in week no for period of 7 days i.e. what i have to show on my results tables based on week no and probably we may need to take into account for check no too.)
result table and date range i picked up was 1/1/2012-1/31/2012
wekno ! checkno ! end date ! previous period ! Daysin period ------ ! ------ ! ------ ! ------------- ! ------------ 1 ! 1 ! 1/7/2012 ! null (as previous period is 2011 and so prvs year i dont count) ! 7 this because we see change in wkno per 7 days 1 ! 2 ! 1/8/2012 !null becoz this one falls same week and therefore previous peroid would be the same as above ! 7 above reason 1 ! 3 ! 1/9/2012 ! null becoz this one falls same week and therefore previous peroid would be the same as above ! 7 above reason 2 ! 1 ! 1/14/2012 ! 1/7/2012 becoz this a second week as you see the change in wekno and therefore its previosu period is 1/7/2012 ! 7 above reason 2 ! 2 ! 1/15/2012 ! 1/7/2012 becoz this check falls on the same second week so previosu would be 1/7/2012 ! 7 above reason 3 ! 1 ! 1/21/2012 ! 1/14/2012 as a new week no starts this gonn be 1/4/2012 ! 7 above reason
I have a table with columns emp_i, LOC_C and SUBSID_C. I want to find all emp_i's with LOC_C OR SUBSID_C as always NULL. Please note that the value should be NULL, always, for all dates.
The query --- should return 102 as LOC_C OR SUBSID_C is ALWAYS NULL. should return 103 as LOC_C is ALWAYS NULL. should not return 101, as LOC_C is not ALWAYS NULL. In other words, the query should give list of emp_i who never ever had a non-null value for LOC_C OR SUBSID_C. The purpose is to find the emp_i for which the columns LOC_C and SUBSID_C are never used.
I tried the query: --------------------------------------------------- SELECT DISTINCT ORG_EMP_I FROM tab1 WHERE ORG_GRP_I = 58 AND ORG_EMP_I NOT IN ( SELECT DISTINCT org_emp_i FROM tab1 ap WHERE ap.ORG_GRP_I = 58 AND trim(ap.LOC_C) IS NOT NULL OR ap.ORG_SBSID_C IS NOT NULL ) ---------------------------------------------------
SELECT a.objname, c.property1, c.value1 FROM datatable a, datatabledet c WHERE a.OBID=c.DATAOBID and a.CLASSNAME='Class1'; OBJNAME PROPERTY1 VALUE1 280-419-1994psCls1Attr3Attr1Value3 280-419-1994psCls1Attr4Attr1Value4 280-419-1994psCls1Attr5Attr1Value5
[code]....
After query output we put through front end code to make it in the following way i.e. convert rows into columns but with respective data value:
