SQL & PL/SQL :: Update Table After Insert To Another Table
Aug 8, 2012
how to adjust a total (counter) after a record is inserted into a table.
the dilemma i am facing is we are using third party software for our fundraising operations so I have no control over what gets done in the background as users process their daily batches into the system. below is the scenario:
during batch posting records are inserted into the paytable, on some pledge donations donors will send overpayments when fulfilling a PLEDGE(as is the case with donor 16084) therefore the system will split the payment during the process and will assign a trantype of 'PP' to the exact pledge amount and a 'PPO'(pledge payment overage) towards the balance. additionally as records get inserted into paytable there is counter of those paytable records going into the appealtable for that particular appealcode so in the case above when batchno 20120808 is completed appealtable.total# will show 103 and total$ will show $2532($10,$12,$10,,,I did not include payment$ since that is not the focus of this issue and will not change).
mgt wants the counter into the appealtable to be 2 instead of 3 records since the two records that were split(same split_transnum) should be recorded as one response not two.
I have tried writing an after insert trigger(dreaded mutating table error) and can't seem to figure out how to update the counter to the appealtable after records are inserted into paytable. below is some code I've been working with but it's not working.
CREATE OR REPLACE TRIGGER PPO_Payment
AFTER INSERT ON paytable
FOR EACH ROW
My scenario is I need to insert into History table when a record is been updated into a tabular form(insert the updated record along with the additional columns Action_by,Action_type(Like Update or delete) and Action Date Into History table i.e History table contains all the records as the main table which is been visible in tabular form along with these additional columns ...Action_by,action_type and action_date.
So now i dont want to create a befor/after update trigger on base table rather i would like to create a generic procedure which will insert the updated record into history table taking the page alias and pade ID as the parameters(GENERIC procedure is nothing but whcih applies to all the tabular forms(Tables) contained int he application ).
I need to take a snapshot of a table before insert or update happens to that table.... in oracle 10g. I am reading the MV docs from oracle and below link..
[URL].......
how MV should be written for this and how to schedule it in dbms_jobs for auto refresh?
assuming that t1 is the table where DML operation are goin to happen so before any insert or update, snapshot has to be taken, and I am assuming that to do this it would look something like this?
create materialized view my_view refresh fast as select * from t1;
I have a base table (Table A) block with multiple records displayed. I need to track audits to this underlying table in the following way:
If user updates a field in the block I want the pre-changed record's audit fields to be set and I need to create a copy of the record with the changed values. Basically any changes will result in the record being logically deleted, and a copy record created with the newly changed values.
Tried to implement in the block's pre-update trigger which will call a package to directly update Table A then Insert into Table A, then requery the block. Is there a clean and efficient way to do this?
i want to create a trigger that will update a table when there is an insert or update.i can't across this error that i don't even know what it means "table %s.%s is mutating, trigger/function may not see it".
*Cause: A trigger (or a user defined plsql function that is referenced in this statement) attempted to look at (or modify) a table that was in the middle of being modified by the statement which fired it.
*Action: Rewrite the trigger (or function) so it does not read that table.
CREATE OR REPLACE TRIGGER set_date_end BEFORE INSERT OR UPDATE OF issued ON shares_amount FOR EACH ROW DECLARE BEGIN INSERT INTO shares_amount(date_end) VALUES(SYSDATE); END set_date_end; /
I want to update a row in a table say Table A and the updated row should be inserted into another table say Table B. I need to do it in a single SQL query and i don't want to do it in PL/SQL with triggers. And i tried with MERGE statement but its working with this scenario.
(Note: I'm using Oracle Database 10g Enterprise Edition Release 10.2.0.1.0).
i have 2 identical tables....the trick is with regards to one column say column A,the first table TableA is constantly having data inserted and data updated, what im trying to do is create a before insert or update trigger that looks at column A and if column A=20 it changes this to 5 and inserts this into the tableB, everything else with the exception of Column A will be the same:-
this trigger i have done works but doesnt change the value of column A (INPUT_NADI) as i dont know how to do this:-
CREATE OR REPLACE TRIGGER UPDATE_TRG_NP_NE1_T0 BEFORE INSERT ON TESTNSS.NP_NE1_T1 REFERENCING NEW AS NEW OLD AS OLD FOR EACH ROW DECLARE BEGIN INSERT INTO NP_NE1_T0 VALUES [code]....
In the trigger I am calling a procedure that returns an error if there is any error returned from procedure. I have to update the table table1's column error_desc (for the same new inserted record for which the trigger was called) with the error received by OUT parameter of procedure called in trigger. I have to update the same record on whose insert this trigger was called.
I've a one history table in which I'm putting approval history data.
For any transaction id you may have more than one record with approval status APPROVED,REJECTED,ERRORED,OVERLIMIT etc
Another program selects records from this table by passing transaction_id. For transaction id, it needs to check the most recent approved record exist or not ? If it's there then updating the record by adding comments to comments field of the same record and then delete all other records for the same transaction id.
If it does not exist then delete all other records and create one with approved status?
What's the simple and best approach to do this (sql or pl/sql)?
I am trying to insert rec into target table if those rec are not existing and trying to update those rec if they already exists from three source tables.I had seen in posts that merge cannot be used with cursor.
SQL> create or replace 2 PACKAGE sis_l_cpl_sis_reb_pgm_hist_pkg 3 IS 4 /******************************************************************** ****************** 5 PACKAGE: sis_load_cpl_sis_reb_pgm_hist 6 PURPOSE: Load CMPLY_SIS_REB_PGM_HIST with data from cmply_sis_p h_dtl,cmply_sis_sls_dtl, 7 cmply_sis_excl_dtl(intial load) 8 ********************************************************************* ******************/ [code].......
Package created.
SQL> create or replace 2 PACKAGE BODY sis_l_cpl_sis_reb_pgm_hist_pkg 3 IS 4 /********************************************************************** ****************** 5 PACKAGE: sis_l_cpl_sis_reb_pgm_hist_pkg 6 PURPOSE: Load CMPLY_SIS_REB_PGM_HIST with data from cmply_sis_pur h_dtl,cmply_sis_sls_dtl, 7 cmply_sis_excl_dtl(intial load) [code].......
Warning: Package Body created with compilation errors.
SQL> sho err Errors for PACKAGE BODY SIS_L_CPL_SIS_REB_PGM_HIST_PKG:
i have a tabular form select * from emp and i want to create table and store there data in goup select empono,sal,com group by dept i want to insert in another table.
how i insert the data in table by forms front end and then update also when again click the button or any change occur in form insert into a select empono,sal,com group by dept
We would like to create functions to insert and update our tables and would like to make it not possible to update and insert the table directly outside of the function. Is there a way to do that in the trigger?
1.Insert all data from global table to base table. 2.Update all data (that means retrieved all data from base table to global table and update this data). Question: How to Insert and Update from Global temporary table ??
I would like to UPDATE the columns p1 and p2 of my table student (studentid:pk,name,p1,p2,...) for a given studentid.and I have a when-button-pressed trigger with this
UPDATE student SET student.p1=:validation.proj1, student.p2=:validation.proj2 where UPPER(student.studentid)=UPPER(:validation.studentid);commit_form;
when I run my form with a correct studentid, I got this error: FRM-40508: ORACLE error: UNABLE to INSERT record
but it is cworking correctly in sqlplus; and I have all priveligies.
primary key constraint on transaction_dtl_bk is affecting the insertion of next correct rows.
CREATE OR REPLACE PROCEDURE NP_DB.san_po_nt_wnpg_1 ( dt DATE ) IS v_sql_error VARCHAR2 (100); -- added by sanjiv v_sqlcode VARCHAR2 (100); ---- added by sanjiv added by sanjiv
Oracle 11gI have a large table of 125 million records - t3_universe. This table never gets updated or altered once loaded, but holds data that we receive from a lead company. I need to select records from this large table that fit certain demographic criteria and insert those into a smaller table - T3_Leads - that will be updated with regard to when the lead is mailed and for other relevant information. select records from this 125 million record table to insert into the smaller table.
I have tried a variety of things - views, materialized views, direct insert into smaller table...I think I am probably missing other approaches. My current attempt has been to create a View using the query that selects the records as shown below. Then use a second query that inserts into T3_Leads from this View V_Market. This is very slow. Can I just use an Insert Into T3_Leads with this query - it did not seem to work with the WITH clause? My Index on the large table is t3_universe_composite and includes zip_code, address_key, household_key.
CREATE VIEW V_Market asWITH got_pairs AS ( SELECT /*+ INDEX_FFS(t3_universe t3_universe_composite) */ l.zip_code, l.zip_plus_4, l.p1_givenname, l.surname, l.address, l.city, l.state, l.household_key, l.hh_type as l_hh_type, l.address_key, l.narrowband_income, l.p1_ms, l.p1_gender, l.p1_exact_age, l.p1_personkey, e.hh_type as filler_data, 1.p1_seq_no, l.p2_seq_no , ROW_NUMBER () OVER ( PARTITION BY l.address_key ORDER BY l.hh_verification_date DESC ) AS r_num FROM t3_universe e JOIN t3_universe l ON l.address_key = e.address_key AND l.zip_code = e.zip_code AND l.p1_gender != e.p1_gender
creating an sql script that can update info from one table in dbase1 to another table in dbase2 that has the same columns and if possible insert date and time in one column when the synchronized is done?
Step 1.Insert all records from the external table into the export table. Truncate the export table first
Step 2.Read in a record from the export map table
Step 3.Search through export table records looking for the key words BRANCH =. Compare the branch code with the branch code form the map table
Step 4.If a match is found mark all records in the export table for the worksheet with the global ID from the export map table as follows..The first line of a worksheet is marked by the words WKSHTS..The last line of the work sheet is marked by the words COMPANY CONFIDENTIAL..We will need to capture the line break so also mark the next line after the COMPANY CONFIDENTIAL line
Step 5.Continue with Steps 2 - 4 until all records have been processed from the export map table.
first I have to create a procedure ti insert data from external table to export table.Global id will be blank.it will be updated by the mapping table's Global Id when The EB COLUMN's data(i.e 8p,2Betc ) will match with the BRANC=NA,2Betc of the datasheet loaded from the external table.. FOLLOWING IS THE SAMPLE DATASHEET
WKSHTS AAAAA BBBBBBBBBBB ELECTRONICS INC. TIME REPORT-DATE PAGE SORT - BR, SLSREP AEC FIELD SALES REPRESENTATIVE 16:14 09/21/12 1 BRANCH = 2B EMPLOYEE NAME SALVAAG, GREGG Days in the Month 28 [code]....
THERE ARE 2 pages..I have to split this LONG REPORT STORED IN WKSHT_LINE COLUMN OF EXPORT TABLE to 2 records..like wise 500 pages are there means 500 records.. AND THEN FIND BRANCH= after that which two words will come i.e NA,2B etc if it will MATCH WITH MAPPING TABLE"S EB COLUMN"S DATA,THEN MAPPING TABLE's GLOBAL ID WILL BE UPDATED TO EXPORT TABLE's GLOBAL ID WHICH IS BLANK
I am trying to update columns of Table A with the columns of Table B. Both these tables have 60,000 rows each. I tried this operation using following 2 queries:
Query 1
Update TableA A set (A.col1,A.col2,A.col3)=(select B.col1,B.col2,B.col3 from TableB where A.CODE=B.CODE)
Query 2 Update TableA A set (A.col1,A.col2,A.col3)=(select B.col1,B.col2,B.col3 from TableB where A.CODE=B.CODE) where exists A.code = (select B.code from TableB B where A.code=B.code)
When i execute these two above queries, it keeps executing indefinitely.
Trying to auto insert the newest records from one table into another Table. I have a vendor provided table that is part of my database (running Oracle 9i) so I can't change the underlying structure to it or their process stops fluxing. However, I can add a trigger to it. What I want to do is this:
When the vendor's software inserts a new row (through their own automated process) I want to insert data from that same new record into another table of my own. (where of course I can re-format it, etc., and make the data my own)
The original vendor table does not have a insertion timestamp field to work off of.What is the best way to trigger an insert off the latest inserted record? It works to replace all the records in the entire vendor table but I only want to insert one record at a time.
I have table t1 and t1 , I want a procedure that will insert all records from t1 into table t2 and after successfull insert table t1 should be truncated .
If their is any problem in insert in to table t2 , the truncate command should not work .
Truncate command should work only after successfully insert command .
i have two databases and created the link between them. I can easily query the data but when i need to update my local records from the remote its showing an error
SQL> update laptop set name = 2 (select name from laptop@ora_link1 where id between 2 and 4) 3 where id between 2 and 4;
(select name from laptop@ora_link1 where id between 2 and 4) * ERROR at line 2: ORA-01427: single-row subquery returns more than one row
select multiple rows from the remote db and update them in the local db.
I used to have two tables to store details of PROPERTIES e.g UNIT_COMMERCIAL , UNIT_RESIDENTIAL. I need to combine both of them into one table called UNIT. I moved the data to the new table, but now I am stuck how to update the values of the child table which called MARKETING.
---
Now, I have two tables:
MARKETING (ID NUMBER PK , OLD_UNIT_ID NUMBER FK ...) UNIT (NEW_ID NUMBER PK , OLD_UNIT_ID NUMBER ... )
I need to update the value of OLD_UNIT_ID in Marketing table to be equal to NEW_ID in the table of UNIT. As you can see the values of OLD_UNIT_ID in both tables are the same.
I used this statement
update ( SELECT distinct M.UNIT_ID , U.OLD_ID , U.ID FROM MARKETING M INNER JOIN UNIT U ON (M.UNIT_ID = U.OLD_ID)) set unit_id = idBut I got this error:
ORA-01732: data manipulation operation not legal on this view??
I want to UPDATE the field DCR of the table TEST1 with the VALUE of the field DCR2 of the table TEST2.At the end, after the update, the table TEST1 would be like that:
