i have a tabular form select * from emp and i want to create table and store there data in goup select empono,sal,com group by dept i want to insert in another table.
how i insert the data in table by forms front end and then update also when again click the button or any change occur in form insert into a select empono,sal,com group by dept
I have a base table (Table A) block with multiple records displayed. I need to track audits to this underlying table in the following way:
If user updates a field in the block I want the pre-changed record's audit fields to be set and I need to create a copy of the record with the changed values. Basically any changes will result in the record being logically deleted, and a copy record created with the newly changed values.
Tried to implement in the block's pre-update trigger which will call a package to directly update Table A then Insert into Table A, then requery the block. Is there a clean and efficient way to do this?
check my query and correct it basically I want to insert/update data from one user to other therefore I write this coding at my form button, when user press button first time its insert data successfully but if user press button again then it should update because data have been inserted in first step.
Actually it is detail table so it can have more then one record against any master. My query fails in updation, it inserts a new record instead of update.
find the attached file for checking QUERY.
Global temporary Table Name:
1.MT_GBL
2.DT_GBL
3.DT2_GBL
Base Table Name:
1.MT
2.DT
3.DT2
My Steps:
1.Insert all data from global table to base table.
2.Update all data (that means retrieved all data from base table to global table and update this data). Question: How to Insert and Update from Global temporary table ??
I would like to UPDATE the columns p1 and p2 of my table student (studentid:pk,name,p1,p2,...) for a given studentid.and I have a when-button-pressed trigger with this
UPDATE student
SET student.p1=:validation.proj1,
student.p2=:validation.proj2
where UPPER(student.studentid)=UPPER(:validation.studentid);commit_form;
when I run my form with a correct studentid, I got this error: FRM-40508: ORACLE error: UNABLE to INSERT record
but it is cworking correctly in sqlplus; and I have all priveligies.
i want to create a trigger that will update a table when there is an insert or update.i can't across this error that i don't even know what it means "table %s.%s is mutating, trigger/function may not see it".
*Cause: A trigger (or a user defined plsql function that is referenced in this statement) attempted to look at (or modify) a table that was in the middle of being modified by the statement which fired it.
*Action: Rewrite the trigger (or function) so it does not read that table.
CREATE OR REPLACE TRIGGER set_date_end
BEFORE INSERT OR UPDATE OF issued ON shares_amount
FOR EACH ROW
DECLARE
BEGIN
INSERT INTO shares_amount(date_end) VALUES(SYSDATE);
END set_date_end;
/
I have a table with a BLOB column ;
I want read data from table and insert to another table with a cursor
My code is :
procedure read_data is
cursor get_data is
select id,image from picture1;
id1 number;
pic blob;
begin
open get_data;
[code]....
when I run form , error FRM-40734 occurred
error in line " fetch .... "
how to insert data in two tables in same time
table1 --master table
table2 --transaction table
I am trying to develop a form consisting of a key block and a single data block. The problem is that the driving table is not the table that needs to be updated.
user wants the following layout:student Advisor
ID# name degree major Concentration ID# name
The driving table (TABLE A) will supply the first 5 fields. The advisor ID comes from (TABLE B).
The user needs to update the adviser ID# field associated with the student ID# field. The form is to be tabular listing all students. I've seen some info on using procedures to insert, delete, update, query and lock tables, but i'm just not sure if that's what is needed.
i want to insert some data in the transactions table on after insert trigger. Which trigger should i use on form level to accomplish this task.
View 4 Replies View Relatedi have 2 identical tables....the trick is with regards to one column say column A,the first table TableA is constantly having data inserted and data updated, what im trying to do is create a before insert or update trigger that looks at column A and if column A=20 it changes this to 5 and inserts this into the tableB, everything else with the exception of Column A will be the same:-
this trigger i have done works but doesnt change the value of column A (INPUT_NADI) as i dont know how to do this:-
CREATE OR REPLACE TRIGGER UPDATE_TRG_NP_NE1_T0
BEFORE INSERT ON TESTNSS.NP_NE1_T1
REFERENCING NEW AS NEW OLD AS OLD
FOR EACH ROW
DECLARE
BEGIN
INSERT INTO NP_NE1_T0
VALUES
[code]....
My scenario is I need to insert into History table when a record is been updated into a tabular form(insert the updated record along with the additional columns Action_by,Action_type(Like Update or delete) and Action Date Into History table i.e History table contains all the records as the main table which is been visible in tabular form along with these additional columns ...Action_by,action_type and action_date.
So now i dont want to create a befor/after update trigger on base table rather i would like to create a generic procedure which will insert the updated record into history table taking the page alias and pade ID as the parameters(GENERIC procedure is nothing but whcih applies to all the tabular forms(Tables) contained int he application ).
Is there a way in oracle 10g to know when was a row inserted or updated using oracle data dictionaries.
I know we can track these by creatig a seperate date column.
I just want to know if there is built in table which shows these.
I need to take a snapshot of a table before insert or update happens to that table.... in oracle 10g. I am reading the MV docs from oracle and below link..
[URL].......
how MV should be written for this and how to schedule it in dbms_jobs for auto refresh?
assuming that t1 is the table where DML operation are goin to happen so before any insert or update, snapshot has to be taken, and I am assuming that to do this it would look something like this?
create materialized view my_view refresh fast as select * from t1;
create materialized view log on my_view;
and then schedule in a dbms_jobs?
Select * from Table A where emp=1;
Emp AID
1 111
select * from Table B where emp=1 ;
----------
AID, emp, start_dt, End_dt
111 1 01-jan-2011 31-dec-2011
112 1 01-jan-2011 31-dec-2011
113 1 01-jan-2011 31-dec-2011
I have After insert or update trigger on Table B. This will update AID column on Table B.
after insert update on table B
update A
set AID=:new.AID where emp=:new.emp;
if i end date any record on table B i wanted to update max(AID) on Table A.
EX update table b
set end_dt= sysdate-1
where aid=111;
So I wrote the trigger on Table A as below
before insert or update on trigger A
declare
v_aid number;
v_strt_dt date;
v_end_dt date;
begin
select max(AID) from table B
where emp=:new.emp;
select v_end_dt from table B where aid=:new.Aid;
if v_end_dt<sysdate then
:new.aid:=v_AID;
end if;
But the problem here is its giving mutating error.Then i tried with autonomus transaction but it willreturn old value when it fiers.
So how can i achive both the task at a time.That means i have to endate Table A , Same time i have to update active max(AID) to table B.
I am calling an after insert Trigger on table1.
In the trigger I am calling a procedure that returns an error if there is any error returned from procedure. I have to update the table table1's column error_desc (for the same new inserted record for which the trigger was called) with the error received by OUT parameter of procedure called in trigger. I have to update the same record on whose insert this trigger was called.
I've a one history table in which I'm putting approval history data.
For any transaction id you may have more than one record with approval status APPROVED,REJECTED,ERRORED,OVERLIMIT etc
Another program selects records from this table by passing transaction_id. For transaction id, it needs to check the most recent approved record exist or not ? If it's there then updating the record by adding comments to comments field of the same record and then delete all other records for the same transaction id.
If it does not exist then delete all other records and create one with approved status?
What's the simple and best approach to do this (sql or pl/sql)?
I'm writing a Procedure which Updates or Inserts data in Multiple tables. Selected fields of 10 tables need to be updated or Inserted. For this I created a table which comprises of fields related to all 10 tables. Then I write Procedure. Under this I create a Cursor which uploads the data from the newly created table which contains different fields of 10 tables. Then I write Update and Insert statements one by one for all 10 tables.
Sample Procedure below.
-------------------------------------------
Create or replace procedure p_proc as
spidm spriden.spriden_pidm%type;
cursor mycur is select * from mytable;
begin
for rec in mycur
[code]......
----------
Note: I created table on my server because data is coming from different server. They will upload the data in the table from there I pick and update the tables. Is updating or Inserting data in different tables one by one is correct?
I am trying to insert rec into target table if those rec are not existing and trying to update those rec if they already exists from three source tables.I had seen in posts that merge cannot be used with cursor.
SQL> create or replace
2 PACKAGE sis_l_cpl_sis_reb_pgm_hist_pkg
3 IS
4 /********************************************************************
******************
5 PACKAGE: sis_load_cpl_sis_reb_pgm_hist
6 PURPOSE: Load CMPLY_SIS_REB_PGM_HIST with data from cmply_sis_p
h_dtl,cmply_sis_sls_dtl,
7 cmply_sis_excl_dtl(intial load)
8 *********************************************************************
******************/
[code].......
Package created.
SQL> create or replace
2 PACKAGE BODY
sis_l_cpl_sis_reb_pgm_hist_pkg
3 IS
4 /**********************************************************************
******************
5 PACKAGE: sis_l_cpl_sis_reb_pgm_hist_pkg
6 PURPOSE: Load CMPLY_SIS_REB_PGM_HIST with data from cmply_sis_pur
h_dtl,cmply_sis_sls_dtl,
7 cmply_sis_excl_dtl(intial load)
[code].......
Warning: Package Body created with compilation errors.
SQL> sho err
Errors for PACKAGE BODY SIS_L_CPL_SIS_REB_PGM_HIST_PKG:
LINE/COL ERROR
-------- -----------------------------------------------------------------
67/7 PL/SQL: SQL Statement ignored
75/19 PL/SQL: ORA-00926: missing VALUES keyword
We would like to create functions to insert and update our tables and would like to make it not possible to update and insert the table directly outside of the function. Is there a way to do that in the trigger?
View 1 Replies View Relatedhow to insert or update a number which is having value like 08,09 in forms 6i while insert its inserting only 8 and 9 not 08 or 09 the first digit zero is not inserting,,,i want to use time file which is 24 hrs format, so i am giving value like 0835 (08:35) but 835 only saving.
View 3 Replies View RelatedI would like to insert a value if that value is not existing in the table (example for a column which contains date only new dates should be inserted and if the date already exists in the column then it needs to get updated )
example of scenario...
date s1 s2 s3
in the above if the date is new..it should get inserted with the appropriate slot no.(s1,s2,s3) if the date already exists it needs to update the no.in slot no.
I want to update / insert records from one user to other user therefore I write this code in my form but it gives me error.
REPORT_DETAILS is a detail table of REPORT_PARAM, given code is working fine at master tables.
Form always goes in TOO_MANY_ROWS exception.
Correct my code, my requirement is: if data found then update else insert new record.
declare
cursor c1 is select * from factory_data.report_details order by rd_rp_id;
rec c1%rowtype;
v_check varchar2(1) := null;
begin
for rec in c1 loop
[code].......
when i tried to insert the details from oracle froms..the data inserts twice to the DB..
my table structure:
create table app_sri
(a_id integer primary key,
p_first_name varchar2(30),
p_last_name varchar2(20),
p_age number(3)
);
here a_id can be genarated through simple sequence(pid_seq)...
trigger on app_sri
create or replace trigger pid_trg
[Code]....
form insertion code..
Begin
insert into app_sri(null,'robo','Big',100);
commit
End;
the data inserted...but twice
what is the reason behind the double insertion?
Table A basically has 4 rows of interest, an outside event changes/inserts let's say row 1.
Row 2 and 3 have to be changed in a trigger depending on the new value of 1.(or not if the value stays the same)
Row 4 is the reference for the update and will not be changed.
My first simple AFTER INSERT or UPDATE trigger obviously failed because of the mutating table error.
I create databalock - LC_REQ_PO_ITM_DTLS...In design time Insert and update allowed for that block - YES. While i execute query, i write procedure like this
GO_BLOCK('LC_REQ_PO_ITM_DTLS');
EXECUTE_QUERY;
SET_ITEM_PROPERTY('pb_item_cd', enabled, property_false);
SET_BLOCK_PROPERTY('LC_REQ_PO_ITM_DTLS',INSERT_ALLOWED, PROPERTY_FALSE);
SET_BLOCK_PROPERTY('LC_REQ_PO_ITM_DTLS',UPDATE_ALLOWED, PROPERTY_FALSE);
but when i press execute button , then data comes properly on that bloack..but i click on that block, error comes like this - 'You can not create record here '.and data disappearing..
I have multirecord block and I want to disable Inserting/Updating/Deleting more then one record at a time.
View 32 Replies View Relatedi have (ship_master-ship_detail) receive material form.when open the form all the master items appears except receiver name and receiver id. when i select the receiver name and id thru lov...all the items (with send information)in ship_detail also comes up expect rec_qty.i put the rec_qty and save from.
now i want to insert(ship_detail) information in another table apart from ship_detail table. if that particular matrial already exist in table it shud only update receive quantity column with +. if i am receiving the material first time then it should just insert a record with ship_detail items.
so where should i write the insert and update.
how to adjust a total (counter) after a record is inserted into a table.
the dilemma i am facing is we are using third party software for our fundraising operations so I have no control over what gets done in the background as users process their daily batches into the system. below is the scenario:
create table paytable(
idnumber number(12),
appealcode varchar2(20),
batchno number(8),
trantype varchar2(3),
transnum number(8),
split_transnum number(8));
[Code]..
IDNUMBER APPEALCODE BATCHNO TRA TRANSNUM SPLIT_TRANSNUM
---------- -------------------- ---------- --- ---------- --------------
16084 DVFG1206 20120808 PP 23853576 1133821
16084 DVFG1206 20120808 PPO 23853577 1133821
1234 DVFG1206 20120808 PP 23853578 1133822
create table appealtable
(appealcode varchar2(20),
total# number(9),
total$ number(13,2));
[Code]...
APPEALCODE TOTAL# TOTAL$
-------------------- ---------- ----------
DVFG1206 100 2500
during batch posting records are inserted into the paytable, on some pledge donations donors will send overpayments when fulfilling a PLEDGE(as is the case with donor 16084) therefore the system will split the payment during the process and will assign a trantype of 'PP' to the exact pledge amount and a 'PPO'(pledge payment overage) towards the balance. additionally as records get inserted into paytable there is counter of those paytable records going into the appealtable for that particular appealcode so in the case above when batchno 20120808 is completed appealtable.total# will show 103 and total$ will show $2532($10,$12,$10,,,I did not include payment$ since that is not the focus of this issue and will not change).
mgt wants the counter into the appealtable to be 2 instead of 3 records since the two records that were split(same split_transnum) should be recorded as one response not two.
I have tried writing an after insert trigger(dreaded mutating table error) and can't seem to figure out how to update the counter to the appealtable after records are inserted into paytable. below is some code I've been working with but it's not working.
CREATE OR REPLACE TRIGGER PPO_Payment
AFTER INSERT ON paytable
FOR EACH ROW
DECLARE
p_cnt NUMBER :=0;
[Code]...
show errors
I want to update a row in a table say Table A and the updated row should be inserted into another table say Table B. I need to do it in a single SQL query and i don't want to do it in PL/SQL with triggers. And i tried with MERGE statement but its working with this scenario.
(Note: I'm using Oracle Database 10g Enterprise Edition Release 10.2.0.1.0).