PL/SQL :: Update / Insert History Table?
Jun 15, 2012
I've a one history table in which I'm putting approval history data.
For any transaction id you may have more than one record with approval status APPROVED,REJECTED,ERRORED,OVERLIMIT etc
Another program selects records from this table by passing transaction_id. For transaction id, it needs to check the most recent approved record exist or not ? If it's there then updating the record by adding comments to comments field of the same record and then delete all other records for the same transaction id.
If it does not exist then delete all other records and create one with approved status?
What's the simple and best approach to do this (sql or pl/sql)?
View 2 Replies
ADVERTISEMENT
Aug 24, 2013
My scenario is I need to insert into History table when a record is been updated into a tabular form(insert the updated record along with the additional columns Action_by,Action_type(Like Update or delete) and Action Date Into History table i.e History table contains all the records as the main table which is been visible in tabular form along with these additional columns ...Action_by,action_type and action_date.
So now i dont want to create a befor/after update trigger on base table rather i would like to create a generic procedure which will insert the updated record into history table taking the page alias and pade ID as the parameters(GENERIC procedure is nothing but whcih applies to all the tabular forms(Tables) contained int he application ).
View 2 Replies
View Related
May 14, 2010
I have a base table (Table A) block with multiple records displayed. I need to track audits to this underlying table in the following way:
If user updates a field in the block I want the pre-changed record's audit fields to be set and I need to create a copy of the record with the changed values. Basically any changes will result in the record being logically deleted, and a copy record created with the newly changed values.
Tried to implement in the block's pre-update trigger which will call a package to directly update Table A then Insert into Table A, then requery the block. Is there a clean and efficient way to do this?
View 4 Replies
View Related
May 29, 2012
i want to create a trigger that will update a table when there is an insert or update.i can't across this error that i don't even know what it means "table %s.%s is mutating, trigger/function may not see it".
*Cause: A trigger (or a user defined plsql function that is referenced in this statement) attempted to look at (or modify) a table that was in the middle of being modified by the statement which fired it.
*Action: Rewrite the trigger (or function) so it does not read that table.
CREATE OR REPLACE TRIGGER set_date_end
BEFORE INSERT OR UPDATE OF issued ON shares_amount
FOR EACH ROW
DECLARE
BEGIN
INSERT INTO shares_amount(date_end) VALUES(SYSDATE);
END set_date_end;
/
View 3 Replies
View Related
Jul 30, 2009
i have 2 identical tables....the trick is with regards to one column say column A,the first table TableA is constantly having data inserted and data updated, what im trying to do is create a before insert or update trigger that looks at column A and if column A=20 it changes this to 5 and inserts this into the tableB, everything else with the exception of Column A will be the same:-
this trigger i have done works but doesnt change the value of column A (INPUT_NADI) as i dont know how to do this:-
CREATE OR REPLACE TRIGGER UPDATE_TRG_NP_NE1_T0
BEFORE INSERT ON TESTNSS.NP_NE1_T1
REFERENCING NEW AS NEW OLD AS OLD
FOR EACH ROW
DECLARE
BEGIN
INSERT INTO NP_NE1_T0
VALUES
[code]....
View 6 Replies
View Related
Dec 28, 2010
I need to take a snapshot of a table before insert or update happens to that table.... in oracle 10g. I am reading the MV docs from oracle and below link..
[URL].......
how MV should be written for this and how to schedule it in dbms_jobs for auto refresh?
assuming that t1 is the table where DML operation are goin to happen so before any insert or update, snapshot has to be taken, and I am assuming that to do this it would look something like this?
create materialized view my_view refresh fast as select * from t1;
create materialized view log on my_view;
and then schedule in a dbms_jobs?
View 1 Replies
View Related
Jun 2, 2011
Select * from Table A where emp=1;
Emp AID
1 111
select * from Table B where emp=1 ;
----------
AID, emp, start_dt, End_dt
111 1 01-jan-2011 31-dec-2011
112 1 01-jan-2011 31-dec-2011
113 1 01-jan-2011 31-dec-2011
I have After insert or update trigger on Table B. This will update AID column on Table B.
after insert update on table B
update A
set AID=:new.AID where emp=:new.emp;
if i end date any record on table B i wanted to update max(AID) on Table A.
EX update table b
set end_dt= sysdate-1
where aid=111;
So I wrote the trigger on Table A as below
before insert or update on trigger A
declare
v_aid number;
v_strt_dt date;
v_end_dt date;
begin
select max(AID) from table B
where emp=:new.emp;
select v_end_dt from table B where aid=:new.Aid;
if v_end_dt<sysdate then
:new.aid:=v_AID;
end if;
But the problem here is its giving mutating error.Then i tried with autonomus transaction but it willreturn old value when it fiers.
So how can i achive both the task at a time.That means i have to endate Table A , Same time i have to update active max(AID) to table B.
View 13 Replies
View Related
Feb 1, 2011
I am calling an after insert Trigger on table1.
In the trigger I am calling a procedure that returns an error if there is any error returned from procedure. I have to update the table table1's column error_desc (for the same new inserted record for which the trigger was called) with the error received by OUT parameter of procedure called in trigger. I have to update the same record on whose insert this trigger was called.
View 3 Replies
View Related
Dec 21, 2012
I am trying to insert rec into target table if those rec are not existing and trying to update those rec if they already exists from three source tables.I had seen in posts that merge cannot be used with cursor.
SQL> create or replace
2 PACKAGE sis_l_cpl_sis_reb_pgm_hist_pkg
3 IS
4 /********************************************************************
******************
5 PACKAGE: sis_load_cpl_sis_reb_pgm_hist
6 PURPOSE: Load CMPLY_SIS_REB_PGM_HIST with data from cmply_sis_p
h_dtl,cmply_sis_sls_dtl,
7 cmply_sis_excl_dtl(intial load)
8 *********************************************************************
******************/
[code].......
Package created.
SQL> create or replace
2 PACKAGE BODY
sis_l_cpl_sis_reb_pgm_hist_pkg
3 IS
4 /**********************************************************************
******************
5 PACKAGE: sis_l_cpl_sis_reb_pgm_hist_pkg
6 PURPOSE: Load CMPLY_SIS_REB_PGM_HIST with data from cmply_sis_pur
h_dtl,cmply_sis_sls_dtl,
7 cmply_sis_excl_dtl(intial load)
[code].......
Warning: Package Body created with compilation errors.
SQL> sho err
Errors for PACKAGE BODY SIS_L_CPL_SIS_REB_PGM_HIST_PKG:
LINE/COL ERROR
-------- -----------------------------------------------------------------
67/7 PL/SQL: SQL Statement ignored
75/19 PL/SQL: ORA-00926: missing VALUES keyword
View 10 Replies
View Related
Aug 5, 2010
i have a tabular form select * from emp and i want to create table and store there data in goup select empono,sal,com group by dept i want to insert in another table.
how i insert the data in table by forms front end and then update also when again click the button or any change occur in form insert into a select empono,sal,com group by dept
View 2 Replies
View Related
Mar 4, 2013
We would like to create functions to insert and update our tables and would like to make it not possible to update and insert the table directly outside of the function. Is there a way to do that in the trigger?
View 1 Replies
View Related
May 15, 2013
Global temporary Table Name:
1.MT_GBL
2.DT_GBL
3.DT2_GBL
Base Table Name:
1.MT
2.DT
3.DT2
My Steps:
1.Insert all data from global table to base table.
2.Update all data (that means retrieved all data from base table to global table and update this data). Question: How to Insert and Update from Global temporary table ??
View 4 Replies
View Related
May 31, 2010
I would like to UPDATE the columns p1 and p2 of my table student (studentid:pk,name,p1,p2,...) for a given studentid.and I have a when-button-pressed trigger with this
UPDATE student
SET student.p1=:validation.proj1,
student.p2=:validation.proj2
where UPPER(student.studentid)=UPPER(:validation.studentid);commit_form;
when I run my form with a correct studentid, I got this error: FRM-40508: ORACLE error: UNABLE to INSERT record
but it is cworking correctly in sqlplus; and I have all priveligies.
View 4 Replies
View Related
Jul 4, 2013
Table A basically has 4 rows of interest, an outside event changes/inserts let's say row 1.
Row 2 and 3 have to be changed in a trigger depending on the new value of 1.(or not if the value stays the same)
Row 4 is the reference for the update and will not be changed.
My first simple AFTER INSERT or UPDATE trigger obviously failed because of the mutating table error.
View 19 Replies
View Related
Aug 8, 2012
how to adjust a total (counter) after a record is inserted into a table.
the dilemma i am facing is we are using third party software for our fundraising operations so I have no control over what gets done in the background as users process their daily batches into the system. below is the scenario:
create table paytable(
idnumber number(12),
appealcode varchar2(20),
batchno number(8),
trantype varchar2(3),
transnum number(8),
split_transnum number(8));
[Code]..
IDNUMBER APPEALCODE BATCHNO TRA TRANSNUM SPLIT_TRANSNUM
---------- -------------------- ---------- --- ---------- --------------
16084 DVFG1206 20120808 PP 23853576 1133821
16084 DVFG1206 20120808 PPO 23853577 1133821
1234 DVFG1206 20120808 PP 23853578 1133822
create table appealtable
(appealcode varchar2(20),
total# number(9),
total$ number(13,2));
[Code]...
APPEALCODE TOTAL# TOTAL$
-------------------- ---------- ----------
DVFG1206 100 2500
during batch posting records are inserted into the paytable, on some pledge donations donors will send overpayments when fulfilling a PLEDGE(as is the case with donor 16084) therefore the system will split the payment during the process and will assign a trantype of 'PP' to the exact pledge amount and a 'PPO'(pledge payment overage) towards the balance. additionally as records get inserted into paytable there is counter of those paytable records going into the appealtable for that particular appealcode so in the case above when batchno 20120808 is completed appealtable.total# will show 103 and total$ will show $2532($10,$12,$10,,,I did not include payment$ since that is not the focus of this issue and will not change).
mgt wants the counter into the appealtable to be 2 instead of 3 records since the two records that were split(same split_transnum) should be recorded as one response not two.
I have tried writing an after insert trigger(dreaded mutating table error) and can't seem to figure out how to update the counter to the appealtable after records are inserted into paytable. below is some code I've been working with but it's not working.
CREATE OR REPLACE TRIGGER PPO_Payment
AFTER INSERT ON paytable
FOR EACH ROW
DECLARE
p_cnt NUMBER :=0;
[Code]...
show errors
View 1 Replies
View Related
Sep 6, 2013
I want to update a row in a table say Table A and the updated row should be inserted into another table say Table B. I need to do it in a single SQL query and i don't want to do it in PL/SQL with triggers. And i tried with MERGE statement but its working with this scenario.
(Note: I'm using Oracle Database 10g Enterprise Edition Release 10.2.0.1.0).
View 8 Replies
View Related
Aug 16, 2010
two history tables with each record having effective date and end date needs to join (date is in dd/mm/yyyy)
table one
effdate enddate ID Name
01/08/2010 04/08/2010 01 devendra
04/08/2010 06/08/2010 01 deven
table two
effdate enddate ID Family
01/08/2010 02/08/2010 01 X
02/08/2010 03/08/2010 01 Y
03/08/2010 05/08/2010 01 Z
05/08/2010 06/08/2010 01 W
Expected output
effdate enddate ID Name Family
01/08/2010 02/08/2010 01 devendra X
02/08/2010 03/08/2010 01 devendra Y
03/08/2010 04/08/2010 01 devendra Z
04/08/2010 05/08/2010 01 deven Z
05/08/2010 06/08/2010 01 deven W
what can be optimum sql for this?
View 3 Replies
View Related
Sep 8, 2008
I have to create a table which contain history of a main table. like this:
if the main table is
========================
nametypelengthnot null
Avarchar5Y
Bvarchar5N
Cvarchar5N
Dvarchar5N
========================
[code]....
I've plan to so this by create a trigger in main_table. my problem is my main table have a lot of fields and I can't write a code to control it 1 by 1 like :
if old.A <> new.a
insert into history("A",old.A,new.a)
if old.B <> new.B
insert into history("B",old.b,new.b)
......
I decided to select column name from the data dictonary using this SQL:
SELECT column_name FROM user_tab_columns WHERE table_name = '<<Table Name>>';
and then do a loop over the resultset and use the column name I've got , like this (its just an idea, may be not a write syntax):
BEGIN
.....
FOR i IN 1..:result.COUNT LOOP
if ld.colname[i] <> :new.colname[i]
INSERT INTO history
VALUES ( colname[i], ld.colname[i], :new.colname[i]);
END LOOP;
END;
but I can't write a "old.colname". I try with " old.'colname' ", " ld.'colname' " but it won't work.how to create a history file like I've describe.
View 5 Replies
View Related
Aug 25, 2011
pgit_policy is transaction table having producer code field.
pgith_policy is history table, on that table if any endorsement passed new records created with same polh_sys_id and increment on POLH_END_NO_IDX.
I am trying to update all records of the history table but its updating only higest POLH_END_NO_IDX only. i need to update all producer code.
update pgith_policy a
set a.polh_producer_code= (select b.pol_producer_code
from pgit_policy b
where b.pol_no=a.polh_no
--and b.POL_END_NO_IDX= a.POLH_END_NO_IDX and b.POL_END_SR_NO = a.POLH_END_SR_NO
and b.pol_producer_code is NOT NULL
and b.pol_class_code='10')
where a.polh_class_code='10'
and a.polh_producer_code is null
and a.polh_appr_dt between to_date('01-06-2011', 'dd-mm-yyyy') and to_date('30-06-2011', 'dd-mm-yyyy')
View 4 Replies
View Related
Nov 23, 2011
I have a history table which has a new record written to it for every time static data is updated. What I want to do is return any record that has been changed on a daily basis returning both the new record and the previous record so you can see the 2 records one below the other and compare.I have written the below but it returns all records per account:
SELECT H.Timestamp,H.AccountNo FROM History H
where exists (select H2.AccountNo,count(*) from History H2
where H2.AccountNo = H.AccountNo
group by H2.AccountNo having count(*) > 1 )
Where H.Timestamp > '20111101'
order by H.AccountNo,H.Timestamp
View 18 Replies
View Related
Mar 1, 2013
Issue with Date format. I am having data in date column in History table like
'2012/02/22 11:05:20 AM'
'2012/08/15 17:00:00'
I am doing extract from this table to txt file. i want date fomrat in "YYYYMMDD HHMMSS".
i tried below query:
select to_char(to_date('1998/05/31 11:00:00 AM','yyyy/mm/dd hh24:mi:ss'),'YYYYMMDD HH24MMSS') from dual;But it is giving error like "ORA-01830: date format picture ends before converting entire input string".
I am using ORACE 11g verion.
Oracle Database 11g Release 11.2.0.3.0 - 64bit Production
PL/SQL Release 11.2.0.3.0 - Production
CORE 11.2.0.3.0 Production
TNS for Linux: Version 11.2.0.3.0 - Production
NLSRTL Version 11.2.0.3.0 - Production
View 8 Replies
View Related
Aug 9, 2010
I need to transfer 6 million records from fact tables to history table .. What is the better and fast process to do that.
View 3 Replies
View Related
May 7, 2010
I have to write a trigger where when the table is updated then one column named 'Status' should be updated as 'U' and if arow is inserted in the table then the column 'Status' needs to be inserted with value 'I'.
Create table test_trig
(
vempno number,
vempname varchar2(20),
status char
)
New to triggers....how to go with both insert and update conditions together.
Can we write a trigger which takes care of both insert and update. I have used Merge statement where I can write conditions based on insert/update done.
View 4 Replies
View Related
Aug 10, 2007
I have a single table with a TOTAL_TIME column which I want to increment by a certain amount every time I get a request from a specific user. If the row for that user does not exist, it should be created and the TOTAL_TIME column should be set to the value that just came in. Otherwise, if it does exist, it should be incremented by the value passed in.
How can I accomplish this in oracle? I don't want to just first do a select, then insert, because that can cause race conditions. I want something that'll do the check and insert/update in one statement (locked).
View 4 Replies
View Related
Dec 7, 2011
Store procedure code, I want to insert data in a database in this fashion,I want to check first if the record exist, if not Insert or else Update.
View 2 Replies
View Related
May 3, 2013
I have two identical tables from different DB's and I need to copy a row from db1 and insert into db2 if it does not exist or update it if it does(on the tables pk).
This is what i was trying until i realized replace drops the whole table where i thought it dropped the row and inserted the new.
copy
from db1
to db2
replace table2
using
select *
from table1
where x = blah
View 3 Replies
View Related
Jul 7, 2010
how can i insert and update to a table in oracle database 10g through a select statement. not using merge.
View 2 Replies
View Related
May 27, 2011
i Have Write A SP But Show me Error when i Compile It.
Create or Replace Procedure PREPAIDEXPENSE(v_OperationType varchar2(1))
v_ATTM_TXN_TYPES_CODE ACC_TXN_TYPES_MST.ATTM_TXN_TYPES_CODE%TYPE;
v_ATTM_TXN_TYPES_DESC ACC_TXN_TYPES_MST.ATTM_TXN_TYPES_DESC%TYPE;
v_ATTM_STATUS ACC_TXN_TYPES_MST.ATTM_STATUS%TYPE;
v_ATSM_STAGE_ID ACC_TXN_TYPES_MST.ATSM_STAGE_ID%TYPE;
v_PP_ACCOUNT_GL ACC_TXN_TYPES_MST.PP_ACCOUNT_GL%TYPE;
[code]....
Error:SQL command not properly ended
View 5 Replies
View Related
Oct 12, 2010
check my query and correct it basically I want to insert/update data from one user to other therefore I write this coding at my form button, when user press button first time its insert data successfully but if user press button again then it should update because data have been inserted in first step.
Actually it is detail table so it can have more then one record against any master. My query fails in updation, it inserts a new record instead of update.
find the attached file for checking QUERY.
View 5 Replies
View Related
Jul 23, 2012
i have a given pl/sql program that first deletes records out of a table and afterwards inserts new rows. now for example 2 rows out of 10 have a foreign constraint and can not be deleted that easily anymore. so i delete the ones i am able to (with the where not exists clause).
now i want to update the records who have a foreign key constraint and the rest with a regular insert. how would i do this the easiest way. i thought i could use insert with a where clause!!
here i have some part from the original
declare
procedure add(
i_id pls_integer,
[Code].....
View 3 Replies
View Related
