PL/SQL :: Update Table With Values From Another Table
Dec 19, 2012
I've tried to Update table with values from another table, but I couldn't.Is there a single way to do that with just one query?Below goes an example:
CREATE TABLE TEST1 (
COD NUMBER,
DCR VARCHAR2(10) );
CREATE TABLE TEST2 (
COD NUMBER,
DCR VARCHAR2(10),
DCR2 VARCHAR2(10) );
[code]....
I want to UPDATE the field DCR of the table TEST1 with the VALUE of the field DCR2 of the table TEST2.At the end, after the update, the table TEST1 would be like that:
SELECT * FROM TEST1
COD --- DCR
------------------
1 'TESTE3'
View 6 Replies
ADVERTISEMENT
May 7, 2010
I have a table called 'price' and want to update it with a table called 'update'. See workbook in the attachment.
The idea is to update the table 'price' with values from 'update' as long as the values from 'update' are different then the values in 'price' or the value in price with 'enddat' empty is not present in 'update'. you can still follow this...
Example:
Enddat for df_location 4 from 'price' is empty and df_location 4 is not present in 'update' so 'enddat' for this df_location should be filled with any date from 'update' (there is always going to be just one distinct date).
I have tried something like this:
proc sql;
insert into work.price (enddat) where enddat = ''
select (date) where df_location not in (select
df_location from work.update);
;
quit;
Well this obviously doesn't work. I'm trying to pass 2 criteria (when enddat is empty and df_location is not present in 'update') but I'm not sure where to put them...
View 3 Replies
View Related
Sep 2, 2011
I have a large table and want to calculate just a few values. Therefore, I don't want to create a new table, I want to update the table. Here an example:
I want to calculate the VALUE_LAG with ID = 4 only (-> two values).
create table zTEST
( PRODUCT number,
ID number,
VALUE number,
VALUE_L1 number );
[Code]..
I tried this, but obviously, windows functions are not allowed in the update statement.
update zTEST
set VALUE_L1 = lag(VALUE) over (partition by PRODUCT, order by ID)
where ID = 4
How can I do this?
View 12 Replies
View Related
Feb 22, 2010
I have a query like this -
SELECT
FIELD_A,
FN_FUNCTION(CARVE_ID, 1) FIELD_B,
FN_FUNCTION(CARVE_ID, 2) FIELD_C,
FN_FUNCTION(CARVE_ID, 3) FIELD_D,
FN_FUNCTION(CARVE_ID, 4) FIELD_E,
FN_FUNCTION(CARVE_ID, 5) FIELD_F,
FN_FUNCTION(CARVE_ID, 6) FIELD_G
FROM TB_CARVE;
When I execute the query, it returns the data (approx - 40,000 rows) in 1 min.But when I try to insert this data into another table (or create a table of this data) it takes me about 2 hours.
Tried using Materialized view, its again the same the refresh takes 2 hours.Basically here, what I am trying to do is the data from the above query is used to update the values in another table.What ever the procedure I am trying it takes 2 hours.
View 6 Replies
View Related
Jun 26, 2013
I have two tables lets say TAB_A and TAB_B. I altered table B to include a new column from table A I wrote a merge statement as follows to merge the data
MERGE INTO TAB_AUSING TAB_BON (TAB_A.SECURITYPERSONKEY=TAB_B.SECURITYPERSONKEY)WHEN MATCHED THEN UPDATE SET TAB_A.PPYACCOUNT=TAB_B.PPYACCOUNT;
I know INSERT is for inserting new records UPDATE to my knowledge is to modify currently existing records (loosely) MERGE is one I rarely used, until this particular scenario. The code works perfectly fine, but I was wondering how could I write an update statement? Or in this scenario should I even be using an update statement?
View 4 Replies
View Related
Feb 15, 2011
I am trying to update a million rows in one table with the values from another tables.
Table being updated CI_ADJ_CHAR column CHAR_VAL_FK1
Table from which values will be used CK_ADJ columns (cx_id, ci_id)
The CI_ADJ_CHAR.CHAR_VAL_FK1 values match CK_ADJ.CX_ID and should be updated with the value CK_ADJ.CI_ID.
The CK_ADJ table has 1.3 million rows and both the columns have indexes defined. Table definitiuon mentioned below
The CI_ADJ_CHAR table has 14 million rows and will update 1 million rows and has an index on the ADJ_ID column but not on the CHAR_VAL_FK1 column.
View 1 Replies
View Related
Jul 21, 2011
I have table test1(id,name) and table test2(id,,name)
Now when I update name column of a row on test1 I want the same value to be updated for the same id in test2.
So I wrote this trigger but its not working
create trigger test_trigger after update on test1 for each row
begin
update test2 set name=new.name where test2.id=id
end
/
View 9 Replies
View Related
May 16, 2013
creating an sql script that can update info from one table in dbase1 to another table in dbase2 that has the same columns and if possible insert date and time in one column when the synchronized is done?
View 3 Replies
View Related
Aug 24, 2013
My scenario is I need to insert into History table when a record is been updated into a tabular form(insert the updated record along with the additional columns Action_by,Action_type(Like Update or delete) and Action Date Into History table i.e History table contains all the records as the main table which is been visible in tabular form along with these additional columns ...Action_by,action_type and action_date.
So now i dont want to create a befor/after update trigger on base table rather i would like to create a generic procedure which will insert the updated record into history table taking the page alias and pade ID as the parameters(GENERIC procedure is nothing but whcih applies to all the tabular forms(Tables) contained int he application ).
View 2 Replies
View Related
May 21, 2011
I have got two tables emp_dtl and iou_tab. i have already made entries i.e booking no, emp_cd, emp_name etc in emp_dtl snc its my master table. I want to retrieve the booking nos through lov in iou_tab which are generated in emp_dtl and corresponding info of emp_cd and emp_name should come in the respected fields in iou_tab.
View 1 Replies
View Related
Aug 31, 2010
I have the below data in table test_1.
select * from test_1
IDNameTotal
-----------
1A100
2B100
3C100
4D100
test_2 table contains the concatination of ID's with comma seperated. Actually in this table ID column is of datatype varchar2.
select * from test_2
ID
----
1,2,3
My requirement is to select the data from test_1 table where the id values in this table exists in test_2 table. I tried with the belowselect statement, but could not get any data.
SELECT * FROM test_1 WHERE to_char(id) IN (SELECT id FROM test_2)
create table test_1 (id number, name varchar2(100), total number)
create table test_2(id varchar2(100))
insert into test_1 values (1,'A',100)
insert into test_1 values (2,'B',100)
insert into test_1 values (3,'C',100)
insert into test_1 values (4,'D',100)
View 4 Replies
View Related
Feb 6, 2011
I am trying to update columns of Table A with the columns of Table B. Both these tables have 60,000 rows each. I tried this operation using following 2 queries:
Query 1
Update TableA A
set
(A.col1,A.col2,A.col3)=(select B.col1,B.col2,B.col3
from TableB
where A.CODE=B.CODE)
Query 2
Update TableA A
set
(A.col1,A.col2,A.col3)=(select B.col1,B.col2,B.col3
from TableB
where A.CODE=B.CODE)
where exists
A.code = (select B.code
from TableB B
where A.code=B.code)
When i execute these two above queries, it keeps executing indefinitely.
View 4 Replies
View Related
Dec 28, 2010
I need to take a snapshot of a table before insert or update happens to that table.... in oracle 10g. I am reading the MV docs from oracle and below link..
[URL].......
how MV should be written for this and how to schedule it in dbms_jobs for auto refresh?
assuming that t1 is the table where DML operation are goin to happen so before any insert or update, snapshot has to be taken, and I am assuming that to do this it would look something like this?
create materialized view my_view refresh fast as select * from t1;
create materialized view log on my_view;
and then schedule in a dbms_jobs?
View 1 Replies
View Related
Aug 14, 2011
Can we update a table using another schema table of same style?
Example:
Update employees
set employee_name=hr.employees.employees_name
where employee_id=100;
View 8 Replies
View Related
Aug 14, 2010
i have two databases and created the link between them. I can easily query the data but when i need to update my local records from the remote its showing an error
SQL> update laptop set name =
2 (select name from laptop@ora_link1 where id between 2 and 4)
3 where id between 2 and 4;
(select name from laptop@ora_link1 where id between 2 and 4)
*
ERROR at line 2: ORA-01427: single-row subquery returns more than one row
select multiple rows from the remote db and update them in the local db.
View 2 Replies
View Related
May 14, 2010
I have a base table (Table A) block with multiple records displayed. I need to track audits to this underlying table in the following way:
If user updates a field in the block I want the pre-changed record's audit fields to be set and I need to create a copy of the record with the changed values. Basically any changes will result in the record being logically deleted, and a copy record created with the newly changed values.
Tried to implement in the block's pre-update trigger which will call a package to directly update Table A then Insert into Table A, then requery the block. Is there a clean and efficient way to do this?
View 4 Replies
View Related
Dec 23, 2010
My scenario is to insert values into 'out' column by comparing 's' and 'IP' columns of temp table.The exact situation is at first need to go to ip column,take a value and then go to source column and check for the same value of ip which is taken previously.Then after corresponding ip of that source column should be inserted back in previous source column.
The situation is marked clearly in file which i am attaching with '--' comments at respective places.I am also pasting the code which i tried out,unfortunately it is giving error as exact fetch returns more than requested number of rows since there are duplicates in the table.I tried it using nested for loops.Also implemented using rowid,but it didnt work.
fixing the errors or if there is any new logic that can be implemented.
DECLARE
i_e NUMBER(10);
BEGIN
FOR cur_1 IN(SELECT IP from temp where IP IS NOT NULL)
LOOP
FOR cur_2 IN(SELECT IP from temp where s=cur_1.IP)
[Code]...
View 9 Replies
View Related
May 29, 2012
i want to create a trigger that will update a table when there is an insert or update.i can't across this error that i don't even know what it means "table %s.%s is mutating, trigger/function may not see it".
*Cause: A trigger (or a user defined plsql function that is referenced in this statement) attempted to look at (or modify) a table that was in the middle of being modified by the statement which fired it.
*Action: Rewrite the trigger (or function) so it does not read that table.
CREATE OR REPLACE TRIGGER set_date_end
BEFORE INSERT OR UPDATE OF issued ON shares_amount
FOR EACH ROW
DECLARE
BEGIN
INSERT INTO shares_amount(date_end) VALUES(SYSDATE);
END set_date_end;
/
View 3 Replies
View Related
Oct 28, 2013
I am searching the simplest way for ad hoc MINUS.I do:
SELECT *
FROM uam_rss_user_XXXXXXX
WHERE host_name IN
('XXX0349',
'XXX0362',
'XXX0363',
'XXX0343',
'XXX0342',
'XXX0499',
[code]....
and look in the table which values are missing (values that are in host_name IN but not in actual table).is there a simpler way for doing an ad hoc MINUS? I know to insert values in temp. Table. How are experienced Oracle pros doing this task?
View 6 Replies
View Related
Aug 28, 2011
My problem is the following:
At the time when P_delivery_date changes in P_ORDERS I want to transfer P_delivery_date to S_delivery_date in S_ORDERS for corresponding records.
Tables:
purchase orders table P_ORDERS:
P_order_number,
P_poz_number,
S_order_number,
S_poz_number,
P_delivery_date
sales orders table S_ORDERS:
S_order_number,
S_poz_number,
S_delivery_date
My question is:
Is it possible and what would be the solution using the TRIGGER on table P_ORDERS to update S_delivery_date with P_delivery_date in S_ORDERS?
View 2 Replies
View Related
Aug 8, 2012
how to adjust a total (counter) after a record is inserted into a table.
the dilemma i am facing is we are using third party software for our fundraising operations so I have no control over what gets done in the background as users process their daily batches into the system. below is the scenario:
create table paytable(
idnumber number(12),
appealcode varchar2(20),
batchno number(8),
trantype varchar2(3),
transnum number(8),
split_transnum number(8));
[Code]..
IDNUMBER APPEALCODE BATCHNO TRA TRANSNUM SPLIT_TRANSNUM
---------- -------------------- ---------- --- ---------- --------------
16084 DVFG1206 20120808 PP 23853576 1133821
16084 DVFG1206 20120808 PPO 23853577 1133821
1234 DVFG1206 20120808 PP 23853578 1133822
create table appealtable
(appealcode varchar2(20),
total# number(9),
total$ number(13,2));
[Code]...
APPEALCODE TOTAL# TOTAL$
-------------------- ---------- ----------
DVFG1206 100 2500
during batch posting records are inserted into the paytable, on some pledge donations donors will send overpayments when fulfilling a PLEDGE(as is the case with donor 16084) therefore the system will split the payment during the process and will assign a trantype of 'PP' to the exact pledge amount and a 'PPO'(pledge payment overage) towards the balance. additionally as records get inserted into paytable there is counter of those paytable records going into the appealtable for that particular appealcode so in the case above when batchno 20120808 is completed appealtable.total# will show 103 and total$ will show $2532($10,$12,$10,,,I did not include payment$ since that is not the focus of this issue and will not change).
mgt wants the counter into the appealtable to be 2 instead of 3 records since the two records that were split(same split_transnum) should be recorded as one response not two.
I have tried writing an after insert trigger(dreaded mutating table error) and can't seem to figure out how to update the counter to the appealtable after records are inserted into paytable. below is some code I've been working with but it's not working.
CREATE OR REPLACE TRIGGER PPO_Payment
AFTER INSERT ON paytable
FOR EACH ROW
DECLARE
p_cnt NUMBER :=0;
[Code]...
show errors
View 1 Replies
View Related
Apr 21, 2013
Using Oracle 11g SOE R2...
I used to have two tables to store details of PROPERTIES e.g UNIT_COMMERCIAL , UNIT_RESIDENTIAL. I need to combine both of them into one table called UNIT. I moved the data to the new table, but now I am stuck how to update the values of the child table which called MARKETING.
---
Now, I have two tables:
MARKETING (ID NUMBER PK , OLD_UNIT_ID NUMBER FK ...)
UNIT (NEW_ID NUMBER PK , OLD_UNIT_ID NUMBER ... )
I need to update the value of OLD_UNIT_ID in Marketing table to be equal to NEW_ID in the table of UNIT. As you can see the values of OLD_UNIT_ID in both tables are the same.
I used this statement
update ( SELECT distinct M.UNIT_ID , U.OLD_ID , U.ID FROM MARKETING M INNER JOIN UNIT U ON (M.UNIT_ID = U.OLD_ID)) set unit_id = idBut I got this error:
ORA-01732: data manipulation operation not legal on this view??
View 8 Replies
View Related
Sep 6, 2013
I want to update a row in a table say Table A and the updated row should be inserted into another table say Table B. I need to do it in a single SQL query and i don't want to do it in PL/SQL with triggers. And i tried with MERGE statement but its working with this scenario.
(Note: I'm using Oracle Database 10g Enterprise Edition Release 10.2.0.1.0).
View 8 Replies
View Related
Jul 19, 2011
I have a column "empno" in EMP table and "deptno" in DEPT table . I want to update both the columns with single UPDATE statement. With out a creation of stored procedure or view(updating it through view).
View 4 Replies
View Related
Aug 3, 2012
I have a table AUD$ (containts some data) and aud_new(exactly structure same as AUD$ table with no data)
i want to schedule a job which will insert all data from AUD$ into table aud_new$ from aud$ table on next day again data from aud$ should be append to aud_new table and aud$ table should be truncated again.
The job should run on every day at midnight at 2 am
(note : If insertion in table aud_new get fail due to any reason , the aud$ table must not get truncated )
View 3 Replies
View Related
Mar 21, 2011
I have one doubt about update command in sql. How to update the multiple rows with different values using update statment.
Eg:-
SQL> set linesize 500;
SQL> set pagesize 500;
SQL> select * from emp;
SQL> select empno,ename,sal from emp;
SQL> select empno,ename,sal from emp;
EMPNO ENAME SAL
---------- ---------- ----------
7839 KING 5000
7698 BLAKE 2850
7782 CLARK 2450
7566 JONES 2975
7654 MARTIN 1250
[Code]....
The above table contains 14 records. Now i would like to update the salary column with different values like
EMPNO SAL
===========
7839 18000
7698 20000
7782 5000
...
...
...
7934 25000
How to update above values with single update query.
View 11 Replies
View Related
Jun 17, 2009
I am trying to write an update statement which updates the User IDs in one table with the User IDs in another table. However I need to update statement to ignore any duplicates that are in the tables.
View 4 Replies
View Related
Feb 23, 2011
I want to update table1 from table2 I wrote statement like this:
UPDATE
TABLE1 t
JOIN TABLE2 tmp
ON t.username = tmp.username
SET
t.password = tmp.password;
It works fine in my MYSQL DATABASE. BUT in ORACLE 9.2 DATABASE, I got Error like this:
JOIN TABLE2 tmp
*
ERROR at line 3:
ORA-00971: missing SET keyword
I tried inner join or natural join => same error.
View 6 Replies
View Related
May 8, 2010
i want to update one table form an other table, for example
SQL> select * from zz;
X VALU
---------- ----
25 abc
18 xyz
14 uvw
12 uvw
26 abc
12 uvw
30 asdf
14 uvw
22 kmn
SQL> select * from xy;
X
----------
12
14
18
22
14
30
25
12
26
9 rows selected
we have two table ZZ AND XY (There is no primary key constraint on these table), ZZ contain two field i.e "X" and "VALU" and XY contain only one field i.e is X. In table ZZ and XY the field X have the same value but not in the same sequence and X have also the duplicated value in both table. now i Add new column in Table XY i.e Valu
SQL> alter table xy
2 add (valu varchar2(6))
3 ;
Table altered.
SQL> select * from xy;
X VALU
---------- ------
12
14
18
22
14
30
25
12
26
9 rows selected. now i want to update the table XY from the table ZZ and set the "valu" in such a manner that the value of field ZZ.Valu insert in the table XY. and it final display the result i.e.
X VALU
---------- ------
12 uvw
14 uvw
18 xyz
22 kmn
14 uvw
30 asdf
25 abc
12 uvw
26 abc
View 12 Replies
View Related
Oct 26, 2010
I am having a requirement to update a table column from min value of column from other table..
Since i cannot format the code well here..I attaching one pdf where we have details and requirements..
View 7 Replies
View Related
