OUI-10150 / A Runtime Execution Error Occurred While Setting S_digcfgnaminglabel
Mar 27, 2013
Environment is CentOS 6.3, 64-bit OS
I get the following error when I use the universal installer (runInstaller.sh)
OUI-10150: Error: A runtime execution error occured while setting s_digcfgnaminglabel isidnull in compnent oracle database 11g 11.2.0.1.0. Installation cannot continue for this component.
I have check my /etc/hosts entries and I believe my jre paths are correct since I get the JAVA windows.
I have downloaded the 2 zip files for Oracle Database 11g Release 2, Standard Edition, Standard Edition One, and Enterprise Edition windows 32bit. I am using windows vista on my laptop. I unpacked and installed the software.
I was getting issues with this installation but found when I turned off my firewall it install completely with no error messages,
I went to start the program but found that I was having problems with the password, I had entered the password I set up on installation, then I found in the start menu it shows a universal installer. I thought perhaps the password error is due to me not having installed it completely yet. So I have clicked on that, however I am now getting the following issue:
ok call me thick but just looked at the dbase folders installed in my start menu and there is a universal installer there, I have clicked on that and it has come up with an error,
OUI-10150:error:A runtime exception occurred while setting s_dlgCfgNamingLabelSIDnul in component Oracle Database 11g 11.2.0.1.0 Installation cannot continue for this component.
then it asks to tick one of the boxes:
Stop installation of all products or Stop installation of this component only.
java.sql.SQLException: ORA-04054: database link GMAIL.COM does not exist
at oracle.jdbc.driver.DatabaseError.throwSqlException(DatabaseError.java:112) at oracle.jdbc.driver.T4CTTIoer.processError(T4CTTIoer.java:331) at oracle.jdbc.driver.T4CTTIoer.processError(T4CTTIoer.java:288) at oracle.jdbc.driver.T4C8Oall.receive(T4C8Oall.java:743) at oracle.jdbc.driver.T4CStatement.doOall8(T4CStatement.java:207) at oracle.jdbc.driver.T4CStatement.executeForRows(T4CStatement.java:946) at oracle.jdbc.driver.OracleStatement.doExecuteWithTimeout(OracleStatement.java:1169) at oracle.jdbc.driver.OracleStatement.executeUpdateInternal(OracleStatement.java:1615) at oracle.jdbc.driver.OracleStatement.executeUpdate(OracleStatement.java:1580) at com.jdbc.pack.Lab1.main(Lab1.java:31)
now what can i do for set the icon at run time..the first part of the message has been removed as it belongs to @allianz2010's previous topic; the rest has been split into a new.
The last week or so, the job has not ran. I finally got some time today to take a look and when I try to manually export the schemas, i get the following message after the first screen (where you choose Schemas and your credentials are entered)
Validation Error - Examine and correct the following errors, then retry the operation: Error - IO error occured.
A few weeks ago i changed the password for sysman and dbsnmp because the backups were not running and after i did that, they ran for a few nights. The only other thing is our system admin for the server changed some user access for the C:Oracle folder, but I still have full control.
I am in the ORA_DBA group and i have "Logon as batch job" selected for my account.
I read at one place to go to Preferences - Preferred Credentials and test the host username and password. When i do this i get the message : "Connection to server as user XXXXXXX failed" so I am thinking it has something to do with my user account, but not sure what i need to change.
I've a procedure and a trigger. The problem is when I call the proc from inside the trigger I get an error message saying that
Error: ORA-00604: error occurred at recursive SQL level 1 ORA-20001: Unhandled error occured! ORA-06512: at "ITEX.REFRESH_XSD", line 23 ORA-06512: at line 21
Here're these two problematic parts:
PROCEDURE: create or replace PROCEDURE Refresh_XSD(TableName IN varchar2) IS -- Variable declarations. XML_Schema xmltype; BEGIN
[code]....
So we have an xsd for a table only once. However that XSD needs to be refreshed when the table is altered, or created when the table is created. That's the reason I'm trying to use that trigger. If I comment out the procedure call from the trigger, everything works correctly except it does not do what needs to be done.
As far as I know only can't execute DDL statements from system triggers. But there's not a single DDL statement in there.
I am using Oracle 10g Database as back end and Developer 6i as front end.I have a procedure which is called upon SAVE. Means before COMMIT;This procedure holds few updates and delete statments.
This prcedure is throughing sql error as follows: ORA-00604: error occurred at recursive SQL level
The error occur when an delete statment is issued which as follows: DELETE FROM DUMMY_TAB001;
I issue the same statement from SQL it is running fine. But when my from runs on this delete statment encounter it through the above oracle error ORA-00604.
I have created a Table with one column in user 'Test' Database 'Test'. Then i have created a Materialized view based on the Table in 'TestMV' in same database 'Test'.working fine. But after adding one column in the table, if i go to refresh the Materialized view the following Error has occured.
ERROR at line 1: ORA-12008: error in materialized view refresh path ORA-00913: too many values ORA-06512: at "SYS.DBMS_SNAPSHOT", line 2256 ORA-06512: at "SYS.DBMS_SNAPSHOT", line 2462 ORA-06512: at "SYS.DBMS_SNAPSHOT", line 2431 ORA-06512: at line 2
I'm calling a web service with HTTPS protocol from a pl/sql program and i'm using the UTL_HTTP package for do this.
I have a Oracle DB installation 11g Enterprise Edition Release 11.2.0.1.0 on my personal computer with a Windows XP OS, and when i run the code it works fine and returns the result I expect. But, when i run the same code on the Oracle DB of my work (Oracle 10g Enterprise Edition Release 10.2.0.4.0 and OS HP-UX) it fails and give me an error, i think that the error has to do with the configuration of the wallet and the certificates in it, because i consume the WS from Os prompt using the command WGET and works fine and i test consuming a WS with HTTP no secure and works fine too.
This is the code and the result in the Oracle DB 11g on my computer:
Connected to Oracle Database 11g Enterprise Edition Release 11.2.0.1.0 Connected as oe@oRCL
Oracle Version :- 11.2.0.2 I found a error in a trigger(Statement Level) ORA-00604:error occurred at recursive SQL level string. Before Finding this issue,Once the DB Response was slow . Will this be the issue Of DB Slow response. The Above trigger fires for each entry in an transaction table. The code is Patched and was executed . The above issue was found during another issue and not the DB Slow response. My Doubt is Whether DB response slow issue would be because of this. Now after fixing this Slow response was not reported.
i have setup the OEM-Dataguard in order to duplicate the DB instance from the primary to the standby DB in the standby server.At first I installed oracle server in Server A (Primary) created DB instance of SCT, in archivelog mode and then I install the oracle binary in Server B (standby) and made 2 servers ORACLE_HOME the same and also I installed OEM agents on the 2 servers and registered successfully to the OEM server.
I then used the dataguard to do the initial backup of the DB in server A and but when I specify the standby DB location, it prompt me the following error.
Error
Examine and correct the following error(s), then retry the operation. Remote Operation Error - Internal error occured
Add Standby Database: Database Location
Primary Database SCT Primary Host Ent Step 3 of 6
Standby Database
* Instance Name The instance name (also referred to as the SID) must be unique on the standby host. Database Storage File SystemRaw Devices Choose whether the database files will be put on a conventional file system or on raw devices.
Standby Host Credentials
Enter the credentials of the user who owns the Oracle installation in the Oracle Home selected below. * Username * Password
Standby Database Location
The standby database can be created in any Oracle Home that has been discovered by Enterprise Manager. Only Oracle Homes on hosts that match the operating system of the primary host are shown. Select the Oracle Home in which to create the standby database.
Search For Host Select Host Oracle Home Oracle Server Version Operating System Operating System Version Ent /u01/app/oracle/product/10.2.0/db_1 10.2.0.1.0 SunOS 5.10 Ent_standby /u01/app/oracle/product/10.2.0/db_1 10.2.0.1.0 SunOS 5.10
When I give the report Full path like 'C:FolderNameCurrency2.rdf. Successfully report run.
after changing the registry path like Reports_Path='C:FolderName'
When I click a button to run the report,I received the following errors.
declare v_report_nameVARCHAR2(100) := 'Currency2.rdf'; begin Web.Show_Document('http://hoitvoltes5:9002/reports/rwservlet?usr'||'&report='||v_report_name,'_blank'); end ; " REP-110: File Currency2.rdf cannot be opened. REP-1070: An error occurred while opening or saving a document. REP-0110: File Currency2.rdf cannot be opened."
I have importing a dump file which is of size upto 6GB, its working fine. At the last step after the import of all the tables when it enables constraints , indexed and everything a pop-up window with the above mentioned error in the subject pops-up.
I am not able to mention the error exactly so find the screen shot as attachment.
I have deinstalled Oracle database, ASM and oracle software. I installed the oracle software, ASM and database. I have seen the error in the ASM trace called
Errors in file /opt/oracle/admin/+ASM/bdump/+asm_gmon_10518.trc:
ORA-29702: error occurred in Cluster Group Service operation ORA-29702: error occurred in Cluster Group Service operation
ORA-00607: Internal error occurred while making a change to a data block ORA-00600: internal error code, arguments: [4194], [89], [83], [], [], [], [], []
create or replace procedure Country_sel(key in varchar2) as cc Res_RelcountryLan.countrycode%type; len Res_Language.langname_en%type; lid Res_Language.langid%type; ab Res_Language.Abrivation%type;
[code]....
when i am running this code im getting
ORA-06502: PL/SQL: numeric or value error: character string buffer too small ORA-06512: at "RASOOL.COUNTRY_SEL", line 11 ORA-06512: at line 6
When i am trying to execute the below in sql. i am getting the error.
create or replace type sum_n as object ( nodes node_d, constructor function sum_n return self as result, member procedure do_s (m date,exd varchar) ); /
LINE/COL ERROR -------- ----------------------------------------------------------------- 0/0 PL/SQL: Compilation unit analysis terminated 2/9 PLS-00201: identifier 'NODE_d' must be declared
I have a trigger that is called from an update on the table, this trigger performs the procedure and this procedure update the Same record in the table That shot the trigger. this situation returns error ORA-0060 - DEADLOCK DETECTED WHILE WAITING FOR RESOURCE. Is there any way that this works?
I'm having a problem with null values. I want to display old student in a display item if subjects text item has records. Otherwise, display new student if it has null values. This is the code that i tried so far..
IF :block2.subjects IS NULL THEN :block3.type := 'NEW STUDENT'; ELSE :block3.type := 'OLD STUDENT'; END IF;
I am trying to install the 11GR2 on HPUX 11.31 U ia64 with silent option.while tried to launch runinstaller, I hit the below issue.
dfltest> ./runInstaller -ignoreSysPrereqs -force -silent -responseFile > /db/dfltest/oracle/product/11.2.0/database/db_install.rsp.mainStarting Oracle Universal Installer... Checking Temp space: must be greater than 240 MB. Actual 475 MB PassedChecking swap space: must be greater than 150 MB. Actual 23189 MB PassedPreparing to launch Oracle Universal Installer from /tmp/OraInstall2013-07-17_12-01-18PM. Please wait ...oradev1 oradflts /db/dfltest/oracle/product/11.2.0/databasedfltest> Error: could not find libjava.soError: could not find Java 2 Runtime Environment. ----extracted from following files -----p10404530_112030_HP64_2of6.zipp10404530_112030_HP64_1of6.zip
I created one Update or Insert trigger on a table.When I executing the update statement it is giving error
Ora-04091 : Table gtest is mutating, trigger/function may not see it.
ORA-04088: error during execution of trigger test_email_change
ORA-04091: "table %s.%s is mutating, trigger/function may not see it"
Cause: A trigger (or a user defined plsql function that is referenced in this statement) attempted to look at (or modify) a table that was in the middle of being modified by the statement which fired it.
Action: Rewrite the trigger (or function) so it does not read that table.
CREATE OR REPLACE TRIGGER T_HST AFTER INSERT On HST FOR EACH ROW DECLARE Begin INSERT INTO HST (EMP_NO, START_DATE ) SELECT EMP_NO, SYSDATE FROM HST WHERE EMP_NO = :NEW.EMP_NO; End T_HRS_SAL_PERIOD_HSTY_UPD_PRI; /
when I insert a new record in table HST I get this error:
ORA-04091: table HST is mutating, trigger/function may not see it ORA-06512: at "T_HST", line 3 ORA-04088: error during execution of trigger 'T_HST'
