We are getting below error while loading a data in Oracle 10g database using sqlloader.
Error
SQL*Loader-704: Internal error: ulnain: error occurred on good insert [-1]
I have importing a dump file which is of size upto 6GB, its working fine. At the last step after the import of all the tables when it enables constraints , indexed and everything a pop-up window with the above mentioned error in the subject pops-up.
I am not able to mention the error exactly so find the screen shot as attachment.
Using Oracel SQL*Loader, is it possible to specify insert type statements? I need to know if i can pass a lower type call to a column. Specifically, if one of the entries is: username=MyUserName@gmail.com ... Then I need it to do the following lower(username) record inserts as myusername@gmail.com
I'm a bit stuck at the moment. I've googled and found LCase (), but I don't know if I'm barking up the wrong tree with that function.
I am trying to insert rows in two tables using sql loader.
I have two tables in database as
SQL> desc name
Name Null? Type
---------------------- -------- ------------
ID NUMBER
NAME VARCHAR2(20)
BD DATE
SQL> desc name3
Name Null? Type
--------------------- ----------- -------------
ID NUMBER
NAME VARCHAR2(20)
BD DATE
I created controlfiles as
[oracle@DBTEST sqldri]$ cat datafile.ctl
options (direct=true)
load data
INFILE *
into table name truncate
when id='1'
[code]....
when i run sql loader as
[oracle@DBTEST sqldri]$ sqlldr hr/hr control=/u01/sqldri/datafile.ctl
SQL*Loader: Release 10.2.0.1.0 - Production on Tue Aug 7 23:30:07 2012
Copyright (c) 1982, 2005, Oracle. All rights reserved.
Load completed - logical record count 2.
no rows is inserted..the log file contain entries as
[oracle@DBTEST sqldri]$ cat datafile.log
SQL*Loader: Release 10.2.0.1.0 - Production on Tue Aug 7 23:30:07 2012
Copyright (c) 1982, 2005, Oracle. All rights reserved.
Control File: /u01/sqldri/datafile.ctl
Data File: /u01/sqldri/datafile.ctl
Bad File: /u01/sqldri/datafile.bad
[code]....
l am loading data i.e text file of huge size into oracle 9i db using sqlldr through command prompt, but my table contains already some data so while loading it shows error as
SQL*Loader-601: For INSERT option, table must be empty.
i cant truncate my table since present data is important.
When I try to load a .TXT file into an Oracle table, the following message is given at the command prompt;
SQL*Loader-524: partial record found at end of datafile
and the load is not successful. The control file is as follows;
Load Data
INFILE 'c:spledlsubj.txt'
APPEND
INTO TABLE tblSubjectiveCode
[code]...
Could the .TXT file causing any problems ?
My oracle is sitting on UNIX, i have a sql loader scripts which load the data in oracle at every 10 min and bad files is written into a directory. since the file names are same it overwrite the badfiles in case of error record. i can devise a code to write the bad file with different name. I want to write error record into oracle table, is this possible and how can i achieve ?
View 5 Replies View RelatedI have a table which is being load by sqlloader, when i load the table without direct path set to TRUE IT Works well , but when DIRECT path set to TRUE ,it comes out with the following error
SQL*Loader-702: Internal error - Unknown column for OCI_ATTR_COL_COUNT
SQL*Loader-2026: the load was aborted because SQL Loader cannot continue.
control file looks like below.
load data
BADFILE '/backup/temp/rajesh/RIO/BadFiles/FILENAME'
append into table TEMP_rio_RESP_TIME_LND
TRAILING NULLCOLS
(
INSTALLATION_ID CHAR
[code]....
data set is
V5_RIO_5NCC|78967|172.16.0.166|RioLoginSrc.asp|0.296|12/04/2012 15:27:25.703|12/04/2012 15:27:26.000|V5_RIO_5NCC||||||||||
V5_RIO_5NCC|78968|172.16.0.167|TextDialogueCentre.asp|0.015|12/04/2012 15:27:27.983|12/04/2012 15:27:28.000|V5_RIO_5NCC||||||||||
V5_RIO_5NCC|78969|172.16.0.167|RioLoginSrc.asp|57.843|12/04/2012 15:27:14.157|12/04/2012 15:28:12.000|V5_RIO_5NCC||||||||||
I have control file written like
LOAD DATA
APPEND
INTO TABLE MYTABLE
FIELDS TERMINATED BY ',' OPTIONALLY ENCLOSED BY '"'
TRAILING NULLCOLS
but i have data in csv file like
660501,1,"0187591","12"PEGHOOKW/SA",,"04/03/2002",
Since there is an extra double quote (denoting inch) in the third column, im getting an error. Is there any way to avoid this error without modifying the csv file.
I am trying to load below data using sql loader.
05/17/12,07:45:39,resn-j35-ctc113,"USR:ESM.CQueryTypeDlg::RunQuery().wft",0.125,P,schapptbook,22712,25704,705355992045,RBA4010200,10.146.218.154,0, "",0,"","",""
table structure
CREATE TABLE TEMP_CERNER_RESP_TIME_LND
(
INSTALLATION_ID VARCHAR2(50 BYTE) NULL,
TRANSACTION_ID VARCHAR2(50 BYTE) NULL,
SERVER_ID VARCHAR2(50 BYTE) NULL,
[code]...
Below function has been used to transfor data and callled in sql loader control file
CREATE OR REPLACE function return_domain( domain_name varchar2)
return varchar2
as
v_dmn varchar2(100)
[code]...
sql loader control file is as below:
load data
BADFILE '/backup/temp/rajesh/CERNER/BadFiles/FILENAME'
append into table TEMP_CERNER_RESP_TIME_LND
WHEN CLINICAL_TRANSACTION_ID = 'USR:ERM PMSEARCH ENCOUNTER RESULTS DISPLAY'
TRAILING NULLCOLS
[code]...
function takes the parameter as 'DOMAIN50_LPAR5002_slainterval051712_rj35cmi102_08_45_00.csv '
FILENAME in control file will be replace by DOMAIN50_LPAR5002_slainterval051712_rj35cmi102_08_45_00.csv when i run the the the loader i get the below error.
Record 1: Rejected - Error on table TEMP_CERNER_RESP_TIME_LND.
ORA-00604: error occurred at recursive SQL level 1
ORA-01843: not a valid month
I tried using the sqlldr locally to load data to the server. I received the error message.
SQL*Loader-704: Internal error: ulconnect: OCIServerAttach [[0]]
ORA-12560: TNS:protocol adapter error
Is there any ora file that I should change or update to be able to use sqlldr from client to load data in the server.
I am recieving errors when trying to load the control file. The errors are as follows:
SQL*Loader-500 Unable to open file (homework.ctl)
SQL*Loader-553 file not found
SQL*Loader-559 SYstem error: The system cannot find the file specified.
My control file is located directly in the C drive (C:homework.ctl). The control file contains the following
LOAD DATA
INFILE 'c:country.dat'
APPEND INTO TABLE homework
fields terminated by ',' optionally encloded by '"'
(country, month, day)
WHEN (month='April')
The command I am entering is:
sqlldr system/password control=homework.ctl
I've tried c:homework.ctl, 'c:homework.ctl', and placing the file in the BIN folder of Oracle.
I ran the following control file in sql loader:
LOAD DATA
INFILE "gateway.csv"
truncate
INTO TABLE GATEWAY
Fields terminated by ","
Optionally enclosed by '"'
trailing nullcols
[code]....
and I got the following error:
zcyds891:/opt/oracle> sqlldr gwcem/gwcem@pfs control=gateway.ctl log=/tmp/ldr.log bad=/tmp/bad.log
SQL*Loader: Release 9.2.0.8.0 - Production on Tue Dec 7 05:07:59 2010
Copyright (c) 1982, 2002, Oracle Corporation. All rights reserved.
SQL*Loader-350: Syntax error at line 12.
Expecting "," or ")", found "INTERGER".
GATEWAYPROTOCOL INTERGER,
^
The current OS is Solaris, SunOS 5.10.
I'm working with sqlldr and i try to insert data from a csv file to a CTL file. One field of my table contains 5 characters but one row has 6 characters in this field, so it's rejected by oracle. (Logical, you can't insert 6 chars in a 5 chars field)
an error is visibly returned, so i wondered how you could catch the value of this error?is it a code? a message?
I'd like to add to my script a condition so that the end of the script would continue even if this error code is returned for that CTL execution.
I am using OWB to load a table which write sql loader command. When running the load i am getting below error.
SQL*Loader-643: error executing INSERT statement for table "STG_EWORK"."STG_ISF_LUCC"
I am unable to guess which privileges is missing.
My control file as below
OPTIONS (SKIP=2,BINDSIZE=50000,ERRORS=0,ROWS=200,READSIZE=65536)
LOAD DATA
CHARACTERSET WE8MSWIN1252
INFILE '\devora003.dev.tfl.localPDWPDW_SourceISF_LUCC_Loadfile.csv'
CONCATENATE 1
INTO TABLE "STG_EWORK"."STG_ISF_LUCC"
[code]....
When trying deploy an mapping, the database link get this error:
ORA-06550: PACKAGE BODY, line 0, column 0:
ORA-04052: error occurred when looking up remote object db1.someC@db1@LOC_db
ORA-00604: error occurred at recursive SQL level 1
ORA-12170: TNS:Connect timeout occurred
I can use tnsping towards the db. I can use
elect * from v$instance@db1@loc_db
i have setup the OEM-Dataguard in order to duplicate the DB instance from the primary to the standby DB in the standby server.At first I installed oracle server in Server A (Primary) created DB instance of SCT, in archivelog mode and then I install the oracle binary in Server B (standby) and made 2 servers ORACLE_HOME the same and also I installed OEM agents on the 2 servers and registered successfully to the OEM server.
I then used the dataguard to do the initial backup of the DB in server A and but when I specify the standby DB location, it prompt me the following error.
Error
Examine and correct the following error(s), then retry the operation.
Remote Operation Error - Internal error occured
Add Standby Database: Database Location
Primary Database SCT
Primary Host Ent
Step 3 of 6
Standby Database
* Instance Name The instance name (also referred to as the SID) must be unique on the standby host. Database Storage File SystemRaw Devices Choose whether the database files will be put on a conventional file system or on raw devices.
Standby Host Credentials
Enter the credentials of the user who owns the Oracle installation in the Oracle Home selected below.
* Username
* Password
Standby Database Location
The standby database can be created in any Oracle Home that has been discovered by Enterprise Manager. Only Oracle Homes on hosts that match the operating system of the primary host are shown. Select the Oracle Home in which to create the standby database.
Search For Host
Select Host Oracle Home Oracle Server Version Operating System Operating System Version
Ent /u01/app/oracle/product/10.2.0/db_1 10.2.0.1.0 SunOS 5.10
Ent_standby /u01/app/oracle/product/10.2.0/db_1 10.2.0.1.0 SunOS 5.10
I have deinstalled Oracle database, ASM and oracle software. I installed the oracle software, ASM and database. I have seen the error in the ASM trace called
Errors in file /opt/oracle/admin/+ASM/bdump/+asm_gmon_10518.trc:
ORA-29702: error occurred in Cluster Group Service operation
ORA-29702: error occurred in Cluster Group Service operation
Error is occurred during the transaction...i.e.
ORA-00607: Internal error occurred while making a change to a data block
ORA-00600: internal error code, arguments: [4194], [89], [83], [], [], [], [], []
how to insert data in oracle table without writing insert statement in oracle 9i or above. i am not going to write insert all, merge, sqlloder and import data.
View 2 Replies View RelatedI installed oracle 10G complete so I can have everything. But now I cannot run sql loader. I check my oracle devsuitehome directory and I cannot find sqlldr.exe
I need to install sql loader separately? I can't find sql loader installer on web.
SQL Loader - How to implement/Best solution.
I have 3 tables with their columns:
- MASTER_TABLE - MASTER_ID, DATA;
- PARENT_TABLE_A - MASTER_ID, DATA;
- PARENT_TABLE_B - MASTER_ID, DATA.
And the file I need to import has lines like the ones below:
MMMASTER_TABLE1
PAPARENT_TABLE_A1
PBPARENT_TABLE_B1
MMMASTER_TABLE2
PAPARENT_TABLE_A2
PBPARENT_TABLE_B2
MMMASTER_TABLE3
PAPARENT_TABLE_A3
PBPARENT_TABLE_B3
The line means:
- 1 - M or P: indicates which table to insert: MASTER or PARENT;
- 2 - M or A or B: indicates MASTER, PARENT_A, PARENT_B;
- 3:18 - DATA.
Based on the values above, what I need to do is:
1. Load a line to MASTER_TABLE;
2. Load a line to PARENT_TABLE_A pointing to its relative line in MASTER_TABLE;
3. Load a line to PARENT_TABLE_B pointing to its relative line in MASTER_TABLE;
4. In the original file line, there is nothing I can use to join a MASTER line with a PARENT line.
The result would be:
MASTER_ID PARENT_DATA
1 PARENT_TABLE_A1
1 PARENT_TABLE_B1
2 PARENT_TABLE_A2
2 PARENT_TABLE_B2
I tried to use both: SEQUENCE and Sequence.NextVall (CurrVal) but they only work when using ROWS=1 and the file I need to load has millions of rows, so I need direct path loading.Also, I read about External Table, but it does not suit my needs because the Application server is not the same as Database server, which is needed by external tables.
in this case is better load the data to a temporary table and then insert to the other tables, I found almost the same question in the topic pointed by the link below: URL....
I want to load geometry into a table using sql*loader. My datafile contains geometry defined as WKT URL...., a standard for geometry and also Oracle has a function called sdo_util.from_wktgeometry.If I'm using a separate 'insert into' statement using this function in sql*plus, there's no problem. But if I'm using the same function in my control-file for sql*loader import, I get a sql*loader-418 error: "bad datafile for column geometrie".
Why and how I can import WKT using sql*loader?
-- data file
id;geometrie
1;POINT(120123.123 485345.789)
2;LINESTRING(123456.01 482543.21, 125764.76 483444.11)
3;POLYGON((121121.22 484394.22, 122887.444 484721.48, 122911.098 486382.45, 121005.21 486592.01, 121121.22 484394.22),(121922.56 485333.23, 122010.22 485854.83, 121922.56 485333.23))
4;MULTIPOINT((120586 483958.33),(120635 483726.11))
5;MULTILINESTRING((117948 480284, 118215 481236),(118475 481604, 120462 482822))
6;MULTIPOLYGON(((123678 481948, 124654 485215, 123678 481948),(127321 488321, 124907 483921, 127321 488321)))
[code]....
I want to use SQL loader in a procedure..will it be possible to use it in procedure and if yes then how..?
View 4 Replies View RelatedMy data file contains records with RECORD_TYPE '01', '02', '03' and '04' in position (30:31) I use sql loader to load this data into a table. I need to load ONLY rows with RECORD_TYPE ='04'. I have to output all the other rows into a file, so I decided to use DISCARD file. Now, those with RECORD_TYPE ='4' have to be loaded into different columns depending on the value in position (267:268).
So, my ctl file should look something like:
WHEN (30:31) = '04'
into table MYDATA
WHEN (267:268) != 'O '
into table MYDATA
WHEN (267:268) = 'O '
and whatever is not '04' goes to discard file.
I tried to use
into table MYDATA
WHEN (30:31) = '04' and (267:268) != 'O '
into table MYDATA
WHEN (30:31) = '04' and (267:268) = 'O '
but I don't get the right result in terms of the discard file.
Is there any way to put together all these conditions?
The SQL loader somehow is loading only first record. The data file is a csv and the end of line character is a new line. Some text fields have multiple new lines.
Here is my control file
load data
infile '/home/devo/c0397105/RuleImport/testLoad/dummyLoad.csv'
Truncate
into table DUMMY_LOAD_TABLE
fields terminated by "," optionally enclosed by '"'
( ID "to_number(:ID)",REQUESTED_GROUP,PURPOSE,COMMENTS)
[code]........
We don't have Retail resource type as Dependent System now; the rule will be changed later when Dependent Systems can accept resource types other than application"
I am using sqlloader for loading the data into database by using csv file.My csv file is delimited by comma in that i am having a column which is having the , and line feeds targeted to load into a long data type.for example as below
descri,dfdfdfd,dfdfdf,
sdfsdf,
dfsdfd,
i want to move this column data into a single table column.But due to because of delimited "," it is splitting into number of columns
I had a requirement of loading flatfile into staging table using SQL Loader, One of the columns in the the Flat file is having values FALSE or TRUE and my requirement is that I load 0 for FALSE and 1 for TRUE which can be achieved by simple DECODE function...I did use decode and tried to load several times but did not work.
INFILE 'sql_4ODS.txt'
BADFILE 'SQL_4ODS.badtxt'
APPEND
INTO TABLE members
FIELDS TERMINATED BY "|"
[code]...
I did try putting a trim as well as SUBSTR but did not work....the cloumn just doent get any values in the output (just null or say free space)
1) can we use a CSV file as a Data file in any format (fixed, delimited...) of Sql loader. I tried, but not succeeded.
2) if not then tell me the reason for it....
3) Also tell me is there any restriction on using the file format for a datafile?
I have a small problem when I am trying to load data into a table using SQL Loader. The data I am trying to load should be a number, but it is in the format '999,999,999 USD'. When I try to load the data, I am getting an invalid number error, due to the USD (I have already accounted for the thousands seperators). My question is, how can I load the data as a number with USD in the format?
Sample Data(testfile.dat):
sample1, "342,2343,543 USD"
sample2, "564,324,465 USD"
sample3, "534,753,213 USD"
[code]....