I am using Oracle 10g Database as back end and Developer 6i as front end.I have a procedure which is called upon SAVE. Means before COMMIT;This procedure holds few updates and delete statments.
This prcedure is throughing sql error as follows: ORA-00604: error occurred at recursive SQL level
The error occur when an delete statment is issued which as follows: DELETE FROM DUMMY_TAB001;
I issue the same statement from SQL it is running fine. But when my from runs on this delete statment encounter it through the above oracle error ORA-00604.
Oracle Version :- 11.2.0.2 I found a error in a trigger(Statement Level) ORA-00604:error occurred at recursive SQL level string. Before Finding this issue,Once the DB Response was slow . Will this be the issue Of DB Slow response. The Above trigger fires for each entry in an transaction table. The code is Patched and was executed . The above issue was found during another issue and not the DB Slow response. My Doubt is Whether DB response slow issue would be because of this. Now after fixing this Slow response was not reported.
Which works fine if i specify a where clause that returns a low amount of values, but im trying to run this update for the whole column (1000's or records).
Ive had no experience of this error before and am unsure of where to start, ive had a quick read around but see something of removing triggers?
The full error is :
ORA-00036: maximum number of recursive SQL levels (50) exceeded ORA-06512: at "new.su_Table", line 61
create or replace trigger INS_ERRORS before insert on MIG_STG_ERRORS for each ROW declare V VARCHAR2(22); [code]........
when i insert into MIG_STG_ERRORS getting error message like 00036. 00000 - "maximum number of recursive SQL levels (%s) exceeded"
*Cause: An attempt was made to go more than the specified number of recursive SQL levels. *Action: Remove the recursive SQL, possibly a recursive trigger.
From front end the user will enter VACANCY_ID in the label box and once he saves that transaction, in background VACANCY_CD filed(sequence) willautomatically generated
.below is my code:{code}create table tmp1(vac_id number,vac_cd number);create sequence tmp1_seq MINVALUE 1 MAXVALUE 9999999999999999999999999999 INCREMENT BY 1 START WITH 1 CACHE 20 NOORDER NOCYCLE ;select tmp1_seq.nextval from dual; ---initiating seqselect tmp1_seq.currval from dual; --checking the current val--trigger creationCREATE OR REPLACE TRIGGER TRIGGER1 AFTER INSERT ON TMP1 FOR EACH ROW DECLARE seqval
[code]...
Error: ORA-00036: maximum number of recursive SQL levels (50) exceededORA-00036: maximum number of recursive SQL levels (50) exceeded
The last week or so, the job has not ran. I finally got some time today to take a look and when I try to manually export the schemas, i get the following message after the first screen (where you choose Schemas and your credentials are entered)
Validation Error - Examine and correct the following errors, then retry the operation: Error - IO error occured.
A few weeks ago i changed the password for sysman and dbsnmp because the backups were not running and after i did that, they ran for a few nights. The only other thing is our system admin for the server changed some user access for the C:Oracle folder, but I still have full control.
I am in the ORA_DBA group and i have "Logon as batch job" selected for my account.
I read at one place to go to Preferences - Preferred Credentials and test the host username and password. When i do this i get the message : "Connection to server as user XXXXXXX failed" so I am thinking it has something to do with my user account, but not sure what i need to change.
I've a procedure and a trigger. The problem is when I call the proc from inside the trigger I get an error message saying that
Error: ORA-00604: error occurred at recursive SQL level 1 ORA-20001: Unhandled error occured! ORA-06512: at "ITEX.REFRESH_XSD", line 23 ORA-06512: at line 21
Here're these two problematic parts:
PROCEDURE: create or replace PROCEDURE Refresh_XSD(TableName IN varchar2) IS -- Variable declarations. XML_Schema xmltype; BEGIN
[code]....
So we have an xsd for a table only once. However that XSD needs to be refreshed when the table is altered, or created when the table is created. That's the reason I'm trying to use that trigger. If I comment out the procedure call from the trigger, everything works correctly except it does not do what needs to be done.
As far as I know only can't execute DDL statements from system triggers. But there's not a single DDL statement in there.
I have created a Table with one column in user 'Test' Database 'Test'. Then i have created a Materialized view based on the Table in 'TestMV' in same database 'Test'.working fine. But after adding one column in the table, if i go to refresh the Materialized view the following Error has occured.
ERROR at line 1: ORA-12008: error in materialized view refresh path ORA-00913: too many values ORA-06512: at "SYS.DBMS_SNAPSHOT", line 2256 ORA-06512: at "SYS.DBMS_SNAPSHOT", line 2462 ORA-06512: at "SYS.DBMS_SNAPSHOT", line 2431 ORA-06512: at line 2
I'm calling a web service with HTTPS protocol from a pl/sql program and i'm using the UTL_HTTP package for do this.
I have a Oracle DB installation 11g Enterprise Edition Release 11.2.0.1.0 on my personal computer with a Windows XP OS, and when i run the code it works fine and returns the result I expect. But, when i run the same code on the Oracle DB of my work (Oracle 10g Enterprise Edition Release 10.2.0.4.0 and OS HP-UX) it fails and give me an error, i think that the error has to do with the configuration of the wallet and the certificates in it, because i consume the WS from Os prompt using the command WGET and works fine and i test consuming a WS with HTTP no secure and works fine too.
This is the code and the result in the Oracle DB 11g on my computer:
Connected to Oracle Database 11g Enterprise Edition Release 11.2.0.1.0 Connected as oe@oRCL
java.sql.SQLException: ORA-04054: database link GMAIL.COM does not exist
at oracle.jdbc.driver.DatabaseError.throwSqlException(DatabaseError.java:112) at oracle.jdbc.driver.T4CTTIoer.processError(T4CTTIoer.java:331) at oracle.jdbc.driver.T4CTTIoer.processError(T4CTTIoer.java:288) at oracle.jdbc.driver.T4C8Oall.receive(T4C8Oall.java:743) at oracle.jdbc.driver.T4CStatement.doOall8(T4CStatement.java:207) at oracle.jdbc.driver.T4CStatement.executeForRows(T4CStatement.java:946) at oracle.jdbc.driver.OracleStatement.doExecuteWithTimeout(OracleStatement.java:1169) at oracle.jdbc.driver.OracleStatement.executeUpdateInternal(OracleStatement.java:1615) at oracle.jdbc.driver.OracleStatement.executeUpdate(OracleStatement.java:1580) at com.jdbc.pack.Lab1.main(Lab1.java:31)
I get the following error when I use the universal installer (runInstaller.sh)
OUI-10150: Error: A runtime execution error occured while setting s_digcfgnaminglabel isidnull in compnent oracle database 11g 11.2.0.1.0. Installation cannot continue for this component.
I have check my /etc/hosts entries and I believe my jre paths are correct since I get the JAVA windows.
i have setup the OEM-Dataguard in order to duplicate the DB instance from the primary to the standby DB in the standby server.At first I installed oracle server in Server A (Primary) created DB instance of SCT, in archivelog mode and then I install the oracle binary in Server B (standby) and made 2 servers ORACLE_HOME the same and also I installed OEM agents on the 2 servers and registered successfully to the OEM server.
I then used the dataguard to do the initial backup of the DB in server A and but when I specify the standby DB location, it prompt me the following error.
Error
Examine and correct the following error(s), then retry the operation. Remote Operation Error - Internal error occured
Add Standby Database: Database Location
Primary Database SCT Primary Host Ent Step 3 of 6
Standby Database
* Instance Name The instance name (also referred to as the SID) must be unique on the standby host. Database Storage File SystemRaw Devices Choose whether the database files will be put on a conventional file system or on raw devices.
Standby Host Credentials
Enter the credentials of the user who owns the Oracle installation in the Oracle Home selected below. * Username * Password
Standby Database Location
The standby database can be created in any Oracle Home that has been discovered by Enterprise Manager. Only Oracle Homes on hosts that match the operating system of the primary host are shown. Select the Oracle Home in which to create the standby database.
Search For Host Select Host Oracle Home Oracle Server Version Operating System Operating System Version Ent /u01/app/oracle/product/10.2.0/db_1 10.2.0.1.0 SunOS 5.10 Ent_standby /u01/app/oracle/product/10.2.0/db_1 10.2.0.1.0 SunOS 5.10
When I give the report Full path like 'C:FolderNameCurrency2.rdf. Successfully report run.
after changing the registry path like Reports_Path='C:FolderName'
When I click a button to run the report,I received the following errors.
declare v_report_nameVARCHAR2(100) := 'Currency2.rdf'; begin Web.Show_Document('http://hoitvoltes5:9002/reports/rwservlet?usr'||'&report='||v_report_name,'_blank'); end ; " REP-110: File Currency2.rdf cannot be opened. REP-1070: An error occurred while opening or saving a document. REP-0110: File Currency2.rdf cannot be opened."
I have importing a dump file which is of size upto 6GB, its working fine. At the last step after the import of all the tables when it enables constraints , indexed and everything a pop-up window with the above mentioned error in the subject pops-up.
I am not able to mention the error exactly so find the screen shot as attachment.
I have deinstalled Oracle database, ASM and oracle software. I installed the oracle software, ASM and database. I have seen the error in the ASM trace called
Errors in file /opt/oracle/admin/+ASM/bdump/+asm_gmon_10518.trc:
ORA-29702: error occurred in Cluster Group Service operation ORA-29702: error occurred in Cluster Group Service operation
ORA-00607: Internal error occurred while making a change to a data block ORA-00600: internal error code, arguments: [4194], [89], [83], [], [], [], [], []
this is my trigger..SQL> create or replace trigger drop_trigger
2 before drop on database 3 declare 4 PRAGMA AUTONOMOUS_TRANSACTION; 5 BEGIN 6 INSERT INTO ddl_log 7 SELECT ora_sysevent,ora_dict_obj_type, ora_dict_obj_owner, 8 ora_dict_obj_name,USER,SYSDATE,to_char(sysdate,'hh24:mi:ss') 9 FROM dual; 10 commit; 11 raise_application_error(-20090,'you can not drop'); 12 end; 13 /
DÚclencheur crÚÚ. when a user enter a "drop table" for exemple, the trigger is run but we have this error message
SQL> drop table fg; drop table fg * ERREUR Ó la ligne 1 : ORA-00604: une erreur s'est produite au niveau SQL rÚcursif 1 ORA-20090: you can not drop ORA-06512: Ó ligne 9
I'm writing PRO C program with oracle 8i. My process first connect to the database with using ora_connect(), proceed the task then diconnect with using ora_disconnect(). This would always in a loop, recently after few cycle of connect and disconnect, when the next issue connect statement, it was unable to connect and return me ora-00604 and the process end. Even i restart the process, after few cycle also the same return me ora-00604 during the connect.
We have an issue regarding OS level authentication to access Oracle 11gR2(11.2.0.1) database.
Our environment - UNIX - AIX 5.3 (OS user id password is having kerberos security). Oracle 11.2.0.1 (32 bit client) installed in server 1 Oracle 11.2.0.1 (64 bit server) installed in server 2. Everything works fine when we created a general userid test_db in the database and connect through sqlplus test_db@dbname.
But when we try to use the option of OS level authentication using "sqlplus /", it throws following error and could not be connected.
ERROR: ORA-12545: Connect failed because target host or object does not exist
I have created the same OS user name in database (with external password authentication) with prefix OPS$. we have set ORACLE_SID as well.
I want to write a sql query which will fetch the data from manual_temp_master and manual_temp_detl.But from manual_temp_detl table, Price_bkt_cds columns should be displayed as columns. Like the should look like as below:
what is the difference on DBMS_STATS for table level and partition level , which will provide the best optimizer . If the table xxxx is partitioned from 1 to 10 ,then running gather stats on table xxxx as whole table level or partition level which will provide best result on the performance.
I need to do a PL/SQL program that prints the same that this WITH clause query, without using WITH or CONNECT BY, i was thinking about a solution with cursors?
WITH recursiveBOM (assembly_id, assembly_name, parent_assembly) AS (SELECT parent.assembly_id, parent.assembly_name, parent.parent_assembly FROM bill_of_materials parent
I have the following table structure...............
Main_Head table name
main_head_id ,pk head_desc, head_id , sub_head_id
keys col table ref col sub_head_id main_head head_id
the table is recursive table self join ----------------------------------------- now i want to write the query which return all head_desc which have same head_id
