I'm trying to drop a user but it gives me below error message-
SQL> drop user <username> cascade;
ERROR at line 1:
ORA-00604: error occurred at recursive SQL level 1
ORA-24005: must use DBMS_AQADM.DROP_QUEUE_TABLE to drop queue tables
However when i check from dba_queue_tables or user_queue_tables it doest show any queue tables.
I am using Oracle 10g Database as back end and Developer 6i as front end.I have a procedure which is called upon SAVE. Means before COMMIT;This procedure holds few updates and delete statments.
This prcedure is throughing sql error as follows: ORA-00604: error occurred at recursive SQL level
The error occur when an delete statment is issued which as follows: DELETE FROM DUMMY_TAB001;
I issue the same statement from SQL it is running fine. But when my from runs on this delete statment encounter it through the above oracle error ORA-00604.
Oracle Version :- 11.2.0.2 I found a error in a trigger(Statement Level) ORA-00604:error occurred at recursive SQL level string. Before Finding this issue,Once the DB Response was slow . Will this be the issue Of DB Slow response. The Above trigger fires for each entry in an transaction table. The code is Patched and was executed . The above issue was found during another issue and not the DB Slow response. My Doubt is Whether DB response slow issue would be because of this. Now after fixing this Slow response was not reported.
View 0 Replies View RelatedWhen trying deploy an mapping, the database link get this error:
ORA-06550: PACKAGE BODY, line 0, column 0:
ORA-04052: error occurred when looking up remote object db1.someC@db1@LOC_db
ORA-00604: error occurred at recursive SQL level 1
ORA-12170: TNS:Connect timeout occurred
I can use tnsping towards the db. I can use
elect * from v$instance@db1@loc_db
Ive just tried running a simple
update BASIC set 'column name' = NULL
Which works fine if i specify a where clause that returns a low amount of values, but im trying to run this update for the whole column (1000's or records).
Ive had no experience of this error before and am unsure of where to start, ive had a quick read around but see something of removing triggers?
The full error is :
ORA-00036: maximum number of recursive SQL levels (50) exceeded
ORA-06512: at "new.su_Table", line 61
I have getting error will insert into table i.e
i have a trigger as below
create or replace trigger INS_ERRORS
before insert on MIG_STG_ERRORS
for each ROW
declare
V VARCHAR2(22);
[code]........
when i insert into MIG_STG_ERRORS getting error message like 00036. 00000 - "maximum number of recursive SQL levels (%s) exceeded"
*Cause: An attempt was made to go more than the specified number of recursive SQL levels.
*Action: Remove the recursive SQL, possibly a recursive trigger.
We have recently upgraded our DR environment from 9i to 11g. We have auditing turned on for 3 tables.
On 9i, AUD$ table size is 11G for 12 months and the upgraded 11g environment has 9G in 2 days....
Below is the sql statement we used to turn on auditing on these tables.
audit select,update,delete on audit_Test2 by session;
Opened SR with Oracle, but no proper response from them...
what changes we need to do in order to reduce the amount of audit data on these tables in 11g?
From front end the user will enter VACANCY_ID in the label box and once he saves that transaction, in background VACANCY_CD filed(sequence) willautomatically generated
.below is my code:{code}create table tmp1(vac_id number,vac_cd number);create sequence tmp1_seq MINVALUE 1 MAXVALUE 9999999999999999999999999999 INCREMENT BY 1 START WITH 1 CACHE 20 NOORDER NOCYCLE ;select tmp1_seq.nextval from dual; ---initiating seqselect tmp1_seq.currval from dual; --checking the current val--trigger creationCREATE OR REPLACE TRIGGER TRIGGER1 AFTER INSERT ON TMP1 FOR EACH ROW DECLARE seqval
[code]...
Error: ORA-00036: maximum number of recursive SQL levels (50) exceededORA-00036: maximum number of recursive SQL levels (50) exceeded
--here's my set up
CREATE USER schemaowner IDENTIFIED BY schemaowner
DEFAULT TABLESPACE users TEMPORARY TABLESPACE temp;
GRANT connect, resource TO schemaowner;
CREATE USER user1 IDENTIFIED BY user1
DEFAULT TABLESPACE users TEMPORARY TABLESPACE temp;
GRANT connect, resource TO user1;
[Code] .....
my desired outcome for user 1
user1> select * from schemaowner.user_data;
user_id column1
1 USER1
my desired outcome for user2 are as follow:
user1> select * from schemaowner.user_data;
user_id column2
2 TESTER 2
the nearest solution is from with reference to [URL]
Quote:
Adding Policies for Column-Level VPD
....
SELECT ENAME, d.dname, JOB, SAL, COMM from emp e, dept d
WHERE d.deptno = e.deptno;
the database returns a subset of rows as follows:
ENAME DNAME JOB SAL COMM
-------------- -------------- ------------ ------------ -------------
ALLEN SALES SALESMAN 1600 300
WARD SALES SALESMAN 1250 500
MARTIN SALES SALESMAN 1250 1400
BLAKE SALES MANAGER 2850
TURNER SALES SALESMAN 1500 0
JAMES SALES CLERK 950
so how do I implement roll level and column level simultaneously?
I have 4 tables , Certain users need to (Select ,insert,delete) certain rows only based on nApplication id
All the tables have Application Id , Based on this application id user will (Select ,insert,delete)
I tried row level security DBMS_RLS.add_policy but it hangs every time when i query the data or when i try to drop the policy. Is there is any method to resolve this issue.
If only Row level security will solve this issue , give me some example
I'm trying to call an help file with the following
BEGIN
Win_API_Shell.WinHelp
('C:eindwerkorainfo.hlp' ,
null ,
WIN_API.HELP_INDEX ,
TRUE );
END;
DK2KWUTIL.pll is attached to the form, info.hlp is an existing file in the path C:eindwerkora.
But it keeps giving me the following error:
FRM-40734: Internal error: PL/SQL error occurred.
The last week or so, the job has not ran. I finally got some time today to take a look and when I try to manually export the schemas, i get the following message after the first screen (where you choose Schemas and your credentials are entered)
Validation Error - Examine and correct the following errors, then retry the operation: Error - IO error occured.
A few weeks ago i changed the password for sysman and dbsnmp because the backups were not running and after i did that, they ran for a few nights. The only other thing is our system admin for the server changed some user access for the C:Oracle folder, but I still have full control.
I am in the ORA_DBA group and i have "Logon as batch job" selected for my account.
I read at one place to go to Preferences - Preferred Credentials and test the host username and password. When i do this i get the message : "Connection to server as user XXXXXXX failed" so I am thinking it has something to do with my user account, but not sure what i need to change.
I've a procedure and a trigger. The problem is when I call the proc from inside the trigger I get an error message saying that
Error: ORA-00604: error occurred at recursive SQL level 1
ORA-20001: Unhandled error occured!
ORA-06512: at "ITEX.REFRESH_XSD", line 23
ORA-06512: at line 21
Here're these two problematic parts:
PROCEDURE:
create or replace
PROCEDURE Refresh_XSD(TableName IN varchar2)
IS
-- Variable declarations.
XML_Schema xmltype;
BEGIN
[code]....
So we have an xsd for a table only once. However that XSD needs to be refreshed when the table is altered, or created when the table is created. That's the reason I'm trying to use that trigger. If I comment out the procedure call from the trigger, everything works correctly except it does not do what needs to be done.
As far as I know only can't execute DDL statements from system triggers. But there's not a single DDL statement in there.
I have the following questions :
1. After creating a view, how do I associate that view with certain level of security. As in, only a few users must be allowed to access that view.
2. How can I create a new user-login and password for my database application?
Our client is having requirements that data should be encrypted through-out the process (from transaction level to backup level).
Requirements are as below -
1) Data should be encrypted and can be access only through application (through front end).
2) Even if pl/sql, sql installed, developer user cannot able to fetch data from database.
3) Even DBA, should not have access to fetch the data from the database.
4) Only assigned DBA, should fetch details from database (provided he/she should have details of database as well as application's user / password).
5) It should be restricted by ip and user details (such as ip of application server with user/password of user).
6) Changes should be purely done from database level only.
I have facing a error message(attached) while creating or installing database in my system.
find attached error snap for the your reference only.
I have created a Table with one column in user 'Test' Database 'Test'. Then i have created a Materialized view based on the Table in 'TestMV' in same database 'Test'.working fine. But after adding one column in the table, if i go to refresh the Materialized view the following Error has occured.
ERROR at line 1:
ORA-12008: error in materialized view refresh path
ORA-00913: too many values
ORA-06512: at "SYS.DBMS_SNAPSHOT", line 2256
ORA-06512: at "SYS.DBMS_SNAPSHOT", line 2462
ORA-06512: at "SYS.DBMS_SNAPSHOT", line 2431
ORA-06512: at line 2
I'm calling a web service with HTTPS protocol from a pl/sql program and i'm using the UTL_HTTP package for do this.
I have a Oracle DB installation 11g Enterprise Edition Release 11.2.0.1.0 on my personal computer with a Windows XP OS, and when i run the code it works fine and returns the result I expect. But, when i run the same code on the Oracle DB of my work (Oracle 10g Enterprise Edition Release 10.2.0.4.0 and OS HP-UX) it fails and give me an error, i think that the error has to do with the configuration of the wallet and the certificates in it, because i consume the WS from Os prompt using the command WGET and works fine and i test consuming a WS with HTTP no secure and works fine too.
This is the code and the result in the Oracle DB 11g on my computer:
Connected to Oracle Database 11g Enterprise Edition Release 11.2.0.1.0
Connected as oe@oRCL
SQL>
SQL> declare
2 v_debug_mode boolean := false;
3 v_req utl_http.req;
[Code]....
PL/SQL procedure successfully completed
SQL>
And this is the code(Is the same, the only difference is the path of the wallet) and the error resultant:
Connected to Oracle Database 10g Enterprise Edition Release 10.2.0.4.0
Connected as gpacheco@acseld
SQL>
SQL> declare
2 v_debug_mode boolean := false;
3 v_req utl_http.req;
[Code].....
I am trying to update the security_level of a mission to the highest security level of missions of the same type.
Attributes of the missions table:
mission_id, code_name, mission_type_id, mission_date, security_level
The following is an intermediate output.
MISSION_ID MISSION_TYPE_ID SECURITY_LEVEL
318 3 6
329 3 2
286 5 6
521 5 3
281 6 4
396 7 3
331 8 4
14 9 4
230 9 0
486 10 2
The maximum output for each mission_type_id
MAX_LEVEL TYPE
6 3
6 5
4 6
3 7
4 8
4 9
2 10
According to this 3 records (329,521 and 230) should update.
But my code returns an error.
ERROR at line 4:
cannot update (......"SECURITY_LEVEL") to NULL
this is my code
UPDATE
AM_X_442_2 amx
SET
Amx.SECURITY_LEVEL =
(
select
max_level
[code].........
I have intended the query to make it legible but it removes all spaces.
when i try to open a our application i got this error
"FRM-92102: A network error has occurred. The Forms Client has attempted to reestablish its connection to the Server 5 time(s) without success."
We are getting below error while loading a data in Oracle 10g database using sqlloader.
Error
SQL*Loader-704: Internal error: ulnain: error occurred on good insert [-1]
java.sql.SQLException: ORA-04054: database link GMAIL.COM does not exist
at oracle.jdbc.driver.DatabaseError.throwSqlException(DatabaseError.java:112)
at oracle.jdbc.driver.T4CTTIoer.processError(T4CTTIoer.java:331)
at oracle.jdbc.driver.T4CTTIoer.processError(T4CTTIoer.java:288)
at oracle.jdbc.driver.T4C8Oall.receive(T4C8Oall.java:743)
at oracle.jdbc.driver.T4CStatement.doOall8(T4CStatement.java:207)
at oracle.jdbc.driver.T4CStatement.executeForRows(T4CStatement.java:946)
at oracle.jdbc.driver.OracleStatement.doExecuteWithTimeout(OracleStatement.java:1169)
at oracle.jdbc.driver.OracleStatement.executeUpdateInternal(OracleStatement.java:1615)
at oracle.jdbc.driver.OracleStatement.executeUpdate(OracleStatement.java:1580)
at com.jdbc.pack.Lab1.main(Lab1.java:31)
i am getting below error while running Aging report.
Enter Password:
MSG-01001: inside beforepform
MSG-00100: p_reporting_level = p_reporting_entity_id =
MSG-00100: Get_Predicate calls complete
REP-1401: 'afterpform': Fatal PL/SQL error occurred.
this is my code in After parameter.
srw.message('100','Get_Predicate calls complete');
:p_reporting_entity_name := substrb(XLA_MO_REPORTING_API.get_reporting_entity_name,1,80);
srw.message('100','p_reporting_entity_name'||:p_reporting_entity_name);
:p_reporting_level_name := substrb(XLA_MO_REPORTING_API.get_reporting_level_name,1,30);
srw.message('100','p_reporting_entity_name'||:p_reporting_level_name);
[code]....
Environment is CentOS 6.3, 64-bit OS
I get the following error when I use the universal installer (runInstaller.sh)
OUI-10150: Error: A runtime execution error occured while setting s_digcfgnaminglabel isidnull in compnent oracle database 11g 11.2.0.1.0. Installation cannot continue for this component.
I have check my /etc/hosts entries and I believe my jre paths are correct since I get the JAVA windows.
i have setup the OEM-Dataguard in order to duplicate the DB instance from the primary to the standby DB in the standby server.At first I installed oracle server in Server A (Primary) created DB instance of SCT, in archivelog mode and then I install the oracle binary in Server B (standby) and made 2 servers ORACLE_HOME the same and also I installed OEM agents on the 2 servers and registered successfully to the OEM server.
I then used the dataguard to do the initial backup of the DB in server A and but when I specify the standby DB location, it prompt me the following error.
Error
Examine and correct the following error(s), then retry the operation.
Remote Operation Error - Internal error occured
Add Standby Database: Database Location
Primary Database SCT
Primary Host Ent
Step 3 of 6
Standby Database
* Instance Name The instance name (also referred to as the SID) must be unique on the standby host. Database Storage File SystemRaw Devices Choose whether the database files will be put on a conventional file system or on raw devices.
Standby Host Credentials
Enter the credentials of the user who owns the Oracle installation in the Oracle Home selected below.
* Username
* Password
Standby Database Location
The standby database can be created in any Oracle Home that has been discovered by Enterprise Manager. Only Oracle Homes on hosts that match the operating system of the primary host are shown. Select the Oracle Home in which to create the standby database.
Search For Host
Select Host Oracle Home Oracle Server Version Operating System Operating System Version
Ent /u01/app/oracle/product/10.2.0/db_1 10.2.0.1.0 SunOS 5.10
Ent_standby /u01/app/oracle/product/10.2.0/db_1 10.2.0.1.0 SunOS 5.10
When I give the report Full path like 'C:FolderNameCurrency2.rdf. Successfully report run.
after changing the registry path like Reports_Path='C:FolderName'
When I click a button to run the report,I received the following errors.
declare
v_report_nameVARCHAR2(100) := 'Currency2.rdf';
begin
Web.Show_Document('http://hoitvoltes5:9002/reports/rwservlet?usr'||'&report='||v_report_name,'_blank');
end ;
"
REP-110: File Currency2.rdf cannot be opened.
REP-1070: An error occurred while opening or saving a document.
REP-0110: File Currency2.rdf cannot be opened."
I have importing a dump file which is of size upto 6GB, its working fine. At the last step after the import of all the tables when it enables constraints , indexed and everything a pop-up window with the above mentioned error in the subject pops-up.
I am not able to mention the error exactly so find the screen shot as attachment.
I have deinstalled Oracle database, ASM and oracle software. I installed the oracle software, ASM and database. I have seen the error in the ASM trace called
Errors in file /opt/oracle/admin/+ASM/bdump/+asm_gmon_10518.trc:
ORA-29702: error occurred in Cluster Group Service operation
ORA-29702: error occurred in Cluster Group Service operation
Error is occurred during the transaction...i.e.
ORA-00607: Internal error occurred while making a change to a data block
ORA-00600: internal error code, arguments: [4194], [89], [83], [], [], [], [], []
this is my trigger..SQL> create or replace trigger drop_trigger
2 before drop on database
3 declare
4 PRAGMA AUTONOMOUS_TRANSACTION;
5 BEGIN
6 INSERT INTO ddl_log
7 SELECT ora_sysevent,ora_dict_obj_type, ora_dict_obj_owner,
8 ora_dict_obj_name,USER,SYSDATE,to_char(sysdate,'hh24:mi:ss')
9 FROM dual;
10 commit;
11 raise_application_error(-20090,'you can not drop');
12 end;
13 /
DÚclencheur crÚÚ. when a user enter a "drop table" for exemple, the trigger is run but we have this error message
SQL> drop table fg;
drop table fg
*
ERREUR Ó la ligne 1 :
ORA-00604: une erreur s'est produite au niveau SQL rÚcursif 1
ORA-20090: you can not drop
ORA-06512: Ó ligne 9
what can i do to delete the ORA-00604??