I have a trigger that is called from an update on the table, this trigger performs the procedure and this procedure update the Same record in the table That shot the trigger. this situation returns error ORA-0060 - DEADLOCK DETECTED WHILE WAITING FOR RESOURCE. Is there any way that this works?
View 1 RepliesI created one Update or Insert trigger on a table.When I executing the update statement it is giving error
Ora-04091 : Table gtest is mutating, trigger/function may not see it.
ORA-04088: error during execution of trigger test_email_change
ORA-04091: "table %s.%s is mutating, trigger/function may not see it"
Cause: A trigger (or a user defined plsql function that is referenced in this statement) attempted to look at (or modify) a table that was in the middle of being modified by the statement which fired it.
Action: Rewrite the trigger (or function) so it does not read that table.
I create this trigger:
CREATE OR REPLACE TRIGGER T_HST AFTER INSERT
On HST
FOR EACH ROW
DECLARE
Begin
INSERT INTO HST (EMP_NO, START_DATE )
SELECT EMP_NO, SYSDATE
FROM HST
WHERE EMP_NO = :NEW.EMP_NO;
End T_HRS_SAL_PERIOD_HSTY_UPD_PRI;
/
when I insert a new record in table HST I get this error:
ORA-04091: table HST is mutating, trigger/function may not see it
ORA-06512: at "T_HST", line 3
ORA-04088: error during execution of trigger 'T_HST'
What I wrong in this trigger?How can I modify it?
i create this trigger to lock inserting transaction for any data greater than 30-04-2013 on a certain table
CREATE OR REPLACE TRIGGER INVALID_DATE_VALUE BEFORE INSERT or UPDATE on ra_cust
FOR EACH ROW
BEGIN
IF :NEW.TRX_DATE >'30-APR-2013'
THEN
-- RAISE_APPLICATION_ERROR('ora-0000','DATE CANNOT FALL IN RANGE...Invalid Date');
RAISE_APPLICATION_ERROR(-20000, 'IT IS NOT ALLOWED TO INSET DATE VALUE GREATER THEN ''30-04-2013''');
END IF;
END;
and this trigger created successfully
when i try to insert data in the table ra_cust even in a range less than 30-apr-2013
i got this error
ORA-20000: IT IS NOT ALLOWED TO INSET DATE VALUE GREATER THEN '30-04-2013'
ORA-06512: at "ARASK_HAGAR.INVALID_DATE_VALUE", line 5
ORA-04088: error during execution of trigger 'ARASK_HAGAR.INVALID_DATE_VALUE'
my question is ,
i have three trigger one at form level,second on database level and third is on library level.
three are same .
which one will fire first,
give me answer.
Changed title to something meaningfull. Next time think about your title for a second rather than just putting oracle.
Im using the following oracle database.
Oracle Database 10g Enterprise Edition Release 10.2.0.4.0 - 64bi
PL/SQL Release 10.2.0.4.0 - Production
CORE 10.2.0.4.0 Production
TNS for Linux: Version 10.2.0.4.0 - Production
NLSRTL Version 10.2.0.4.0 - Production
I have one problem in trigger execution. I have a small plsql block in trigger and, I want to execute it as a dynamic way. but it is giving the error. Please find the trigger code. Here my intension is that, the column name used in trigger should be dynamic. In future, if I want to switch the column name, I have to do without modification in trigger.
The error im getting is "ORA-01008: not all variables bound".
CREATE OR REPLACE TRIGGER ETM_AR_IU
AFTER UPDATE ON
EXTERNAL_MAPPING
REFERENCING NEW AS NEW OLD AS OLD
FOR EACH ROW
[code]...
i have an understanding about Integrity constraint checking and the trigger execution sequence, which i decsribe below.
Integrity constraint are restiction on DML operation performed by the user. When a user deletes or updates or inserts a rows in a table then oracle performs certain checking to see that the data which is effecting the row abide certain rules. There are certain per-defined set or rules that can be applied on a table such as PRIMARY KEY, FORIEGN KEY, UNIQUE, CHECK, NOT NULL etc, user-defined rules can be applied on tables by using Triggers.
In both the cases the Integrity Constraint Checking is deferred until the complete execution of the statement. All rows are inserted first, then all rows are checked for constraint violations.
So when i see the trigger execution model the following steps are performed by oracle, Oracle uses the following execution model to maintain the proper firing sequence of multiple triggers and constraint checking..This is what the Oracle Documentation Library says [extract from Oracle Database Concepts 10g Release 1 (10.1)].
1. Run all BEFORE statement triggers that apply to the statement.
2. Loop for each row affected by the SQL statement.
a.Run all BEFORE row triggers that apply to the statement.
b.Lock and change row, and perform integrity constraint checking. (The lock is not released until the transaction is committed.)
c.Run all AFTER row triggers that apply to the statement.
3.Complete deferred integrity constraint checking.
4.Run all AFTER statement triggers that apply to the statement.
As for step 3 here the checking of the constraints for the statement is performed which where defered till the complete execution of the statement, then what is done in step 2b? what constraints are checked there?
When i am trying to execute the below in sql. i am getting the error.
create or replace type sum_n as object (
nodes node_d,
constructor function sum_n return self as result,
member procedure do_s (m date,exd varchar)
);
/
LINE/COL ERROR
-------- -----------------------------------------------------------------
0/0 PL/SQL: Compilation unit analysis terminated
2/9 PLS-00201: identifier 'NODE_d' must be declared
I have a package with pipelined function in it. using the below stmt to execute the function in Oracle 11g.
select * FROM table(Test_PKG.Test_PIPELINED ('A','--N/A--','1/1/2010','1/1/2011'));
Throwing an error: invalid month error.
CREATE TYPE WBS_ROW IS OBJECT
(
Product VARCHAR2 (100),
DESC VARCHAR (1000),
RecDATE DATE);
[code]....
java.sql.SQLException: ORA-04054: database link GMAIL.COM does not exist
at oracle.jdbc.driver.DatabaseError.throwSqlException(DatabaseError.java:112)
at oracle.jdbc.driver.T4CTTIoer.processError(T4CTTIoer.java:331)
at oracle.jdbc.driver.T4CTTIoer.processError(T4CTTIoer.java:288)
at oracle.jdbc.driver.T4C8Oall.receive(T4C8Oall.java:743)
at oracle.jdbc.driver.T4CStatement.doOall8(T4CStatement.java:207)
at oracle.jdbc.driver.T4CStatement.executeForRows(T4CStatement.java:946)
at oracle.jdbc.driver.OracleStatement.doExecuteWithTimeout(OracleStatement.java:1169)
at oracle.jdbc.driver.OracleStatement.executeUpdateInternal(OracleStatement.java:1615)
at oracle.jdbc.driver.OracleStatement.executeUpdate(OracleStatement.java:1580)
at com.jdbc.pack.Lab1.main(Lab1.java:31)
Environment is CentOS 6.3, 64-bit OS
I get the following error when I use the universal installer (runInstaller.sh)
OUI-10150: Error: A runtime execution error occured while setting s_digcfgnaminglabel isidnull in compnent oracle database 11g 11.2.0.1.0. Installation cannot continue for this component.
I have check my /etc/hosts entries and I believe my jre paths are correct since I get the JAVA windows.
I have a procedure which i wrapped using the oracle 11g wrap utility. If i execute the wrapped procedure using jdbc i am getting an error of 0RA-00900 invalid sql statement.
The procedure is having basic sql statements only.The same procedure if i wrap using Oracle 9i and execute using jdbc it works fine.Is there any change in Oracle 9i wrap utility and Oracle 11g wrap utility.
I tried even Oracle 10g wrap it is also not working fine.
I just create a trigger to fire whenever the quantity on hand for a books table has been updated.when the quantity on hand become zero ,it should call 'insert_reorder' procedure and pass the ISBN for the books. This is my code
CREATE OR REPLACE TRIGGER books_qty_on_hand_trg
AFTER UPDATE OF on_hand_quantity ON books
FOR EACH ROW
BEGIN
IF :NEW.on_hand_quantity = 0 THEN
insert_reorde_pp (:NEW.isbn)
END IF;
END;
But i m getting this error
LINE/COL ERROR
4/3 PLS-00103: Encountered the symbol "END" when expecting one of the following: := . ( % ; The symbol ";" was substituted for "EN D" to continue.
I am trying to create a Database event trigger called as ErrorTrap that will fire every time a server error occurs. The error refers to any Oracle error. This trigger can serve as a notification mechanism to an administrator, by populating an error log table.Thus I must create an error lag table before handed and once an error happens, the error code and details must be written back to this table.
View 6 Replies View RelatedI have created a trigger which gets executed whenever there is DML operation happens on it. I am getting the below error. ORA-04091: table RTS_SCHEMA.TBL1 is mutating, trigger/function may not see it...the tigger is on table tbl1 and the structure of the table is
CREATE TABLE TBL1
(
SLNO NUMBER NULL,
DES VARCHAR2(20 BYTE) NULL
)
LOGGING
NOCOMPRESS
NOCACHE
NOPARALLEL
MONITORING;
[code]...
How to overcome this error
SQL> create or replace trigger trig_insert
2 before insert on insuredpersons for each row
3 begin
4 insert into sms_icare(insuredid)values(:new.id);
5 end;
when i am trying to insert it is throwing error is
ORA-04098:trigger "marbke.trig.sms' is invalid and failed re-validation
I am created a trigger to raise the error if the any one try to enter data in one column that is attached a sequence number .This trigger is working but with errors, these error are getting after try to insert values into the table.The errors are:
insert into test2 values(24,'horse','hyderabad',30);-- here 30 is the value trying to enter into the regid column
Error report:
SQL Error: ORA-20101: inserting the regid value not allowed.. it will take auto number
ORA-06512: at "SCOTT.TRI_UNQID", line 11
ORA-04088: error during execution of trigger 'SCOTT.TRI_UNQID'
My trigger is
<code>
create or replace
trigger tri_unqid
before insert on test2
for each row
[code]....
Output:
this is executing and throwing my exception along with other and one more point is if inserted sucessfully with out errors then it is inserting values in the table in the front not in the end of records.
I am getting error while creating a trigger. I am not yet find any wrong statement. See the following code and comments.
SQL> CREATE OR REPLACE TRIGGER shclog_in before update on shclog for each row
WHEN (to_number(new.MSGTYPE) = 210)
2 3 declare
4 PRAGMA AUTONOMOUS_TRANSACTION;
5 begin
6 insert into starcas.transaction_log values(:new.PAN,
[code].......
Warning: Trigger created with compilation errors.
SQL> show error
Errors for TRIGGER SHCLOG_IN:
LINE/COL ERROR
-------- -----------------------------------------------------------------
4/1 PL/SQL: SQL Statement ignored
4/21 PL/SQL: ORA-00942: table or view does not exist
SQL>
We have the following trigger in database, whenever we try to insert the record in WIP_OPERATIONS , NO DATA FOUND exception has been thrown, when we debugged, we did not find any issue. The first select statement is getting failed even though there is the value coming for :NEW.wip_entity_id and when we execute the query separately in database with the :NEW.WIP_ENTITY_ID, its getting the value. What could be the reason? Can't we use SELECT Statement in AFTER or BEFORE INSERT trigger?why its throwing NO_DATA_FOUND Exception?
CREATE OR REPLACE TRIGGER sdm_brasil_wj_ops_iface_trg
BEFORE INSERT OR DELETE
ON WIP_OPERATIONS
REFERENCING
[code...
I'm trying to create trigger:
CREATE OR REPLACE TRIGGER TBI_ID
BEFORE
INSERT
ON zoo.risk_eval#ctypein
[code]...
Here is error message:
ORA-24344: success with compilation error
2/14 PLS-00201: identifier 'ZOO.RISK_EVAL_CTYPEIN#ID_SEQ' must be declared
2/3 PL/SQL: Statement ignored
I have created a trigger in a different server and is working fine. But then when I implemented the same trigger in a different server (secured) then I'm encountering this error:
PLS-00049: bad bind variable
Below is the code for the trigger for reference:
create or replace
TRIGGER TRG_ROLE_RIGHT_HISTORY
BEFORE INSERT OR UPDATE OR DELETE ON MAS_BPI.LOS_SEC_ROLE_RIGHT_MAPPING
FOR EACH ROW
DECLARE
[code]....
I got this error on the code below when i insert for example a record in a table "pedidos_teste" (insert into sgc_supergestor.pedidos_teste select * from sgc_supergestor.pedidos where IDPC=181 and IDPEDIDO=48 )
Below is the error: ORA-1403: ORA-01403: no data found
CREATE OR REPLACE TRIGGER SGC_SUPERGESTOR.pedidos_teste_I_U_D
after INSERT OR DELETE OR UPDATE ON SGC_SUPERGESTOR.PEDIDOS_TESTE
REFERENCING NEW AS NEW OLD AS OLD
FOR EACH ROW
[code]....
My layout is working well enough triggers though are causing me some problems. I am getting the following error message just about every time I write a trigger so I am getting the feeling I am doing something fundamentally wrong. Like there is something I am just not getting because I am getting this error on the simplest of actions.
The error:
FRM-40735: WHEN-VALIDATE-ITEM trigger raised unhandled exception ORA-06502.
--------------------------------------------------------------
ORA-01403: no data found
The trigger is this:
cs3_prog.set_date_mode;
this calls the following procedure in the package cs3_prog:
procedure set_date_mode IS
BEGIN
:cs3_data.street := 'something';
end;
this in the past did a lot more but I kept throwing stuff out to see what could have been causing the problem. This does actually work if I ok through the first error message and then try entering data again into the field the trigger is tied to. On this second firing of the trigger is does successfully alter the value.
Just the fact that this is happening every time I create a trigger and it seems to happen regardless of what I have the trigger doing leads me to believe I have something fundamentally wrong and I would love to have it set straight.
How can we overcome mutating trigger error using global temporary table.
Suppose if we use the following trigger we will get mutating trigger error.
CREATE OR REPLACE TRIGGER t1
AFTER INSERT ON emp
FOR EACH ROW
DECLARE
BEGIN
UPDATE emp SET sal=sal+100;
END;
/
I have getting error will insert into table i.e
i have a trigger as below
create or replace trigger INS_ERRORS
before insert on MIG_STG_ERRORS
for each ROW
declare
V VARCHAR2(22);
[code]........
when i insert into MIG_STG_ERRORS getting error message like 00036. 00000 - "maximum number of recursive SQL levels (%s) exceeded"
*Cause: An attempt was made to go more than the specified number of recursive SQL levels.
*Action: Remove the recursive SQL, possibly a recursive trigger.
Here are the relevant tables to the triggers I'm having trouble with.
create table profile
(
userID number(10),
uname varchar2(64),
email varchar2(32),
password varchar2(32),
date_of_birth date,
[code]...
Here's the triggers I currently have that doesn't work.
create or replace trigger DropAccount
after delete on profile
FOR EACH ROW
BEGIN
delete from groupMembership where (userID = :old.userID);
END;
The DropAccount trigger's purpose is to delete all the records from groupMembership that contains the userID of the person deleting his/her own account. It appears to work when I run the following statements in sqlplus:
delete from profile where (userID = '1');
select * from groupMembership where (userID = '1');
But when I try to delete an account through a java interface using JDBC I get the following error:
Machine Error: java.sql.SQLException: ORA-04091: table *****.GROUPMEMBERSHIP is mutating, trigger/function may not see it
ORA-06512: at "*****.DROPACCOUNT", line 2
ORA-04088: error during execution of trigger '*****.DROPACCOUNT'
The java function basically just executes a delete statement.
I am trying to build one custom 10g form from TEMPLATE.fmb. when i try to compile my form in desktop it is giving error as Error FRM-40735: ON-ERROR trigger raised unhandled exception ORA-6508.
View 1 Replies View RelatedTable A basically has 4 rows of interest, an outside event changes/inserts let's say row 1.
Row 2 and 3 have to be changed in a trigger depending on the new value of 1.(or not if the value stays the same)
Row 4 is the reference for the update and will not be changed.
My first simple AFTER INSERT or UPDATE trigger obviously failed because of the mutating table error.
when ever the developer connecting to database to generate froms or While trying to create inventory categories below error is appearing.
FRM-40735: On-error trigger raised unhandled exception ora-06508..
I am using forms 10g developer suite, AIX in appl server.
When I run the form on my local drive through web I am getting error that,FRM-40735:ON-ERROR trigger raised unhandled exception ORA-06508.
My fmbs & fmxs are in e:fmb, libraries are in d:applicationlib.
FORMS_PATH in Registry is C:DevSuiteHome_1cgenf61admin;C:DevSuiteHome_1forms;e:fmb;d:applicationlib
I have set the same path in default.env also.What should I update, to run the form successfully.