SQL & PL/SQL :: Trigger Creation Error On Secured Environment
Jun 21, 2011
I have created a trigger in a different server and is working fine. But then when I implemented the same trigger in a different server (secured) then I'm encountering this error:
PLS-00049: bad bind variable
Below is the code for the trigger for reference:
create or replace
TRIGGER TRG_ROLE_RIGHT_HISTORY
BEFORE INSERT OR UPDATE OR DELETE ON MAS_BPI.LOS_SEC_ROLE_RIGHT_MAPPING
FOR EACH ROW
DECLARE
[code]....
View 17 Replies
ADVERTISEMENT
Nov 28, 2012
I am getting error while creating a trigger. I am not yet find any wrong statement. See the following code and comments.
SQL> CREATE OR REPLACE TRIGGER shclog_in before update on shclog for each row
WHEN (to_number(new.MSGTYPE) = 210)
2 3 declare
4 PRAGMA AUTONOMOUS_TRANSACTION;
5 begin
6 insert into starcas.transaction_log values(:new.PAN,
[code].......
Warning: Trigger created with compilation errors.
SQL> show error
Errors for TRIGGER SHCLOG_IN:
LINE/COL ERROR
-------- -----------------------------------------------------------------
4/1 PL/SQL: SQL Statement ignored
4/21 PL/SQL: ORA-00942: table or view does not exist
SQL>
View 4 Replies
View Related
Feb 6, 2009
I am trying to write a trigger that will do an insert/delete/update into a audit table when a change has occurred on the primary table. The change will be recorded in the audit table by a incemental sequence number and the updated data.
there will be an extra column in the audit table
how to get a simplified version of this trigger.
the primary table will look like so
Id_num varchar (20)
code Integer
desc varchar(20)
sequence_num Integer
audit table
Id_num varchar(20)
code Integer
desc varchar(20)
timestamp date
sequence_num Integer
View 6 Replies
View Related
Aug 5, 2010
I am getting an above errors while starting the emctl start dbconsole..
View 9 Replies
View Related
Apr 26, 2013
I have 30 packages to be created for a new user, i call in the execute_pkg.sql which creates all the 30 packages.
i use like this
sql> set echo on
sql> set spool execute_pkg_spool.txt
sql>@execute_pkg.sql
sql> spool off
My questions:
I find it difficult to figure out the which pkg was not created, at present the spool file is too big with the pkg code in it
create or replace package test1....
...
..
..
Warning: Package Body created with compilation errors.
i wanted the output like this
test1
Warning: Package Body created with compilation errors.
View 5 Replies
View Related
Jun 10, 2010
It's been 2 days from now that I'm bugging with this kind of error in my manual dB creation. I used DBCA first but we had a default directory settings, that's why I resorted to create the db manually. The dB was already created and currently has a status of STARTED.. I cannot mount it due to this error:
SQL> startup nomount
ORACLE instance started.
Total System Global Area 247463936 bytes
Fixed Size 2235856 bytes
Variable Size 177840688 bytes
[code]....
View 3 Replies
View Related
Apr 12, 2010
I am getting compilation error when create nested table type depend on table structure
SQL> CREATE OR REPLACE TYPE typ$nttb$1 IS TABLE OF emp%rowtype
2 ;
3 /
Warning: Type created with compilation errors.
SQL> show error
Errors for TYPE TYP$NTTB$1:
LINE/COL ERROR
-------- -----------------------------------------------------------------
0/0 PL/SQL: Compilation unit analysis terminated
1/29 PLS-00329: schema-level type has illegal reference to SCOTT.EMP
SQL>
View 5 Replies
View Related
Jun 19, 2012
I'm trying to move my backup sets from windows database environment, to OEL 5.7 environment on another server.
I've found a manual [URL] by which I am trying to do it.I took backup sets from last night's backup using RMAN,and the current parameter(initSID.ora) file from the running live database.Now i need to configure control files in the pfile accordingly.
1. can i take current control files from the running system, to restore and recover backup sets from last night, to the state the database was at backup time?
2. how can i find out if control files are backed up and know by RMAN? "list backup completed after '2012-JUN-19';" >> gives me Archive redo logs, datafiles, but don't see the control files(or don't reconize them).
View 15 Replies
View Related
Oct 18, 2012
i want to create a table to perform a task when i insert client account details in this table then check the account type is in(S,C,R) and balance should be also check when account type S then balance >=5000, account type C then balance >=10000 and account type R then balance >=5000 but when i run this query then facing error "ORA-02438: Column check constraint cannot reference other columns"
SQL> ed
Wrote file afiedt.buf
1 create table kcb_acc_tab
2 (
3 accno varchar2(20) constraint accno_pk primary key,
4 name varchar2(20) constraint name_nn not null
5 constraint name_chk check((substr(name,1,1) between 'A' and 'Z') and name=upper(name)),
[code]....
View 4 Replies
View Related
Jun 25, 2012
I tried to create my EA workspace for APEX 4.2 and got the following Error.
ORA-20987: APEX - GET_BLOCK Error. - ORA-20001: Execution of the statement was unsuccessful. ORA-01653: unable to extend table APEX_040200.WWV_FLOW_PAGE_PLUGS by 1024 in tablespace APEX_REL42 <pre>declare s varchar2(32767) := null; l_clob clob; l_length number := 1; begin s := null; wwv_flow_api.create_page_plug ( p_id=> 6594522669003504543 + wwv_flow_api.g_id_offset, p_flow_id=> wwv_flow.g_flow_id, p_page_id=> 0, p_plug_name=> 'Menu', p_region_name=&g
View 14 Replies
View Related
Apr 8, 2013
While Creating database on AIX Machine using DBCA utility I am getting following error
Error Details:
-------------------------------------------------------------------------------------------------------------------
Allocating device....
Specifying datafiles...
Specifing datafiles...
Restoring ...
[code]....
View 2 Replies
View Related
Sep 16, 2011
i am creating database manually in oracle 9i os version ibm-aix5.3 it showing following error
CREATE DATABASE "varathu"
*
ERROR at line 1:
ORA-01501: CREATE DATABASE failed
ORA-00200: controlfile could not be created
ORA-00202: controlfile: '/backup/varathu/control01.ctl'
ORA-27040: skgfrcre: create error, unable to create file
IBM AIX RISC System/6000 Error: 13: Permission denied
View 18 Replies
View Related
Aug 15, 2010
I'm getting a "TNS disconnect" after database creation script creation in DBCA. Haven't figured out what's going on. I'm attempting to create a 2nd database on one linux 64 server. I get all the way through DBCA, but it won't go the final mile. Any thoughts? I've tried setting the port to a different port from the existing LISTENER, creating a LISTENER2 and associating it with the 2nd instance.
View 1 Replies
View Related
Jul 9, 2012
During ASM Disk Groups creation after the ASM instance creation, receive the following error: Disk Group ORAASMGROUP2 already exists. Cannot be created again
The Grid infrastructure was deinstall one time and still the same issue.
View 4 Replies
View Related
Jul 20, 2011
I just create a trigger to fire whenever the quantity on hand for a books table has been updated.when the quantity on hand become zero ,it should call 'insert_reorder' procedure and pass the ISBN for the books. This is my code
CREATE OR REPLACE TRIGGER books_qty_on_hand_trg
AFTER UPDATE OF on_hand_quantity ON books
FOR EACH ROW
BEGIN
IF :NEW.on_hand_quantity = 0 THEN
insert_reorde_pp (:NEW.isbn)
END IF;
END;
But i m getting this error
LINE/COL ERROR
4/3 PLS-00103: Encountered the symbol "END" when expecting one of the following: := . ( % ; The symbol ";" was substituted for "EN D" to continue.
View 5 Replies
View Related
Jan 17, 2011
I have a trigger that is called from an update on the table, this trigger performs the procedure and this procedure update the Same record in the table That shot the trigger. this situation returns error ORA-0060 - DEADLOCK DETECTED WHILE WAITING FOR RESOURCE. Is there any way that this works?
View 1 Replies
View Related
Oct 4, 2008
I am trying to create a Database event trigger called as ErrorTrap that will fire every time a server error occurs. The error refers to any Oracle error. This trigger can serve as a notification mechanism to an administrator, by populating an error log table.Thus I must create an error lag table before handed and once an error happens, the error code and details must be written back to this table.
View 6 Replies
View Related
Jun 13, 2012
I have created a trigger which gets executed whenever there is DML operation happens on it. I am getting the below error. ORA-04091: table RTS_SCHEMA.TBL1 is mutating, trigger/function may not see it...the tigger is on table tbl1 and the structure of the table is
CREATE TABLE TBL1
(
SLNO NUMBER NULL,
DES VARCHAR2(20 BYTE) NULL
)
LOGGING
NOCOMPRESS
NOCACHE
NOPARALLEL
MONITORING;
[code]...
View 5 Replies
View Related
Mar 30, 2012
How to overcome this error
SQL> create or replace trigger trig_insert
2 before insert on insuredpersons for each row
3 begin
4 insert into sms_icare(insuredid)values(:new.id);
5 end;
when i am trying to insert it is throwing error is
ORA-04098:trigger "marbke.trig.sms' is invalid and failed re-validation
View 2 Replies
View Related
Apr 11, 2013
I am created a trigger to raise the error if the any one try to enter data in one column that is attached a sequence number .This trigger is working but with errors, these error are getting after try to insert values into the table.The errors are:
insert into test2 values(24,'horse','hyderabad',30);-- here 30 is the value trying to enter into the regid column
Error report:
SQL Error: ORA-20101: inserting the regid value not allowed.. it will take auto number
ORA-06512: at "SCOTT.TRI_UNQID", line 11
ORA-04088: error during execution of trigger 'SCOTT.TRI_UNQID'
My trigger is
<code>
create or replace
trigger tri_unqid
before insert on test2
for each row
[code]....
Output:
this is executing and throwing my exception along with other and one more point is if inserted sucessfully with out errors then it is inserting values in the table in the front not in the end of records.
View 8 Replies
View Related
May 10, 2013
We have the following trigger in database, whenever we try to insert the record in WIP_OPERATIONS , NO DATA FOUND exception has been thrown, when we debugged, we did not find any issue. The first select statement is getting failed even though there is the value coming for :NEW.wip_entity_id and when we execute the query separately in database with the :NEW.WIP_ENTITY_ID, its getting the value. What could be the reason? Can't we use SELECT Statement in AFTER or BEFORE INSERT trigger?why its throwing NO_DATA_FOUND Exception?
CREATE OR REPLACE TRIGGER sdm_brasil_wj_ops_iface_trg
BEFORE INSERT OR DELETE
ON WIP_OPERATIONS
REFERENCING
[code...
View 15 Replies
View Related
Jul 19, 2011
I'm trying to create trigger:
CREATE OR REPLACE TRIGGER TBI_ID
BEFORE
INSERT
ON zoo.risk_eval#ctypein
[code]...
Here is error message:
ORA-24344: success with compilation error
2/14 PLS-00201: identifier 'ZOO.RISK_EVAL_CTYPEIN#ID_SEQ' must be declared
2/3 PL/SQL: Statement ignored
View 10 Replies
View Related
Sep 13, 2011
I created one Update or Insert trigger on a table.When I executing the update statement it is giving error
Ora-04091 : Table gtest is mutating, trigger/function may not see it.
ORA-04088: error during execution of trigger test_email_change
ORA-04091: "table %s.%s is mutating, trigger/function may not see it"
Cause: A trigger (or a user defined plsql function that is referenced in this statement) attempted to look at (or modify) a table that was in the middle of being modified by the statement which fired it.
Action: Rewrite the trigger (or function) so it does not read that table.
View 2 Replies
View Related
Aug 9, 2011
I create this trigger:
CREATE OR REPLACE TRIGGER T_HST AFTER INSERT
On HST
FOR EACH ROW
DECLARE
Begin
INSERT INTO HST (EMP_NO, START_DATE )
SELECT EMP_NO, SYSDATE
FROM HST
WHERE EMP_NO = :NEW.EMP_NO;
End T_HRS_SAL_PERIOD_HSTY_UPD_PRI;
/
when I insert a new record in table HST I get this error:
ORA-04091: table HST is mutating, trigger/function may not see it
ORA-06512: at "T_HST", line 3
ORA-04088: error during execution of trigger 'T_HST'
What I wrong in this trigger?How can I modify it?
View 7 Replies
View Related
Apr 4, 2011
I got this error on the code below when i insert for example a record in a table "pedidos_teste" (insert into sgc_supergestor.pedidos_teste select * from sgc_supergestor.pedidos where IDPC=181 and IDPEDIDO=48 )
Below is the error: ORA-1403: ORA-01403: no data found
CREATE OR REPLACE TRIGGER SGC_SUPERGESTOR.pedidos_teste_I_U_D
after INSERT OR DELETE OR UPDATE ON SGC_SUPERGESTOR.PEDIDOS_TESTE
REFERENCING NEW AS NEW OLD AS OLD
FOR EACH ROW
[code]....
View 6 Replies
View Related
May 2, 2006
My layout is working well enough triggers though are causing me some problems. I am getting the following error message just about every time I write a trigger so I am getting the feeling I am doing something fundamentally wrong. Like there is something I am just not getting because I am getting this error on the simplest of actions.
The error:
FRM-40735: WHEN-VALIDATE-ITEM trigger raised unhandled exception ORA-06502.
--------------------------------------------------------------
ORA-01403: no data found
The trigger is this:
cs3_prog.set_date_mode;
this calls the following procedure in the package cs3_prog:
procedure set_date_mode IS
BEGIN
:cs3_data.street := 'something';
end;
this in the past did a lot more but I kept throwing stuff out to see what could have been causing the problem. This does actually work if I ok through the first error message and then try entering data again into the field the trigger is tied to. On this second firing of the trigger is does successfully alter the value.
Just the fact that this is happening every time I create a trigger and it seems to happen regardless of what I have the trigger doing leads me to believe I have something fundamentally wrong and I would love to have it set straight.
View 11 Replies
View Related
Jun 21, 2010
How can we overcome mutating trigger error using global temporary table.
Suppose if we use the following trigger we will get mutating trigger error.
CREATE OR REPLACE TRIGGER t1
AFTER INSERT ON emp
FOR EACH ROW
DECLARE
BEGIN
UPDATE emp SET sal=sal+100;
END;
/
View 27 Replies
View Related
Apr 30, 2013
i create this trigger to lock inserting transaction for any data greater than 30-04-2013 on a certain table
CREATE OR REPLACE TRIGGER INVALID_DATE_VALUE BEFORE INSERT or UPDATE on ra_cust
FOR EACH ROW
BEGIN
IF :NEW.TRX_DATE >'30-APR-2013'
THEN
-- RAISE_APPLICATION_ERROR('ora-0000','DATE CANNOT FALL IN RANGE...Invalid Date');
RAISE_APPLICATION_ERROR(-20000, 'IT IS NOT ALLOWED TO INSET DATE VALUE GREATER THEN ''30-04-2013''');
END IF;
END;
and this trigger created successfully
when i try to insert data in the table ra_cust even in a range less than 30-apr-2013
i got this error
ORA-20000: IT IS NOT ALLOWED TO INSET DATE VALUE GREATER THEN '30-04-2013'
ORA-06512: at "ARASK_HAGAR.INVALID_DATE_VALUE", line 5
ORA-04088: error during execution of trigger 'ARASK_HAGAR.INVALID_DATE_VALUE'
View 2 Replies
View Related
Aug 29, 2012
I have getting error will insert into table i.e
i have a trigger as below
create or replace trigger INS_ERRORS
before insert on MIG_STG_ERRORS
for each ROW
declare
V VARCHAR2(22);
[code]........
when i insert into MIG_STG_ERRORS getting error message like 00036. 00000 - "maximum number of recursive SQL levels (%s) exceeded"
*Cause: An attempt was made to go more than the specified number of recursive SQL levels.
*Action: Remove the recursive SQL, possibly a recursive trigger.
View 4 Replies
View Related
Dec 10, 2012
Here are the relevant tables to the triggers I'm having trouble with.
create table profile
(
userID number(10),
uname varchar2(64),
email varchar2(32),
password varchar2(32),
date_of_birth date,
[code]...
Here's the triggers I currently have that doesn't work.
create or replace trigger DropAccount
after delete on profile
FOR EACH ROW
BEGIN
delete from groupMembership where (userID = :old.userID);
END;
The DropAccount trigger's purpose is to delete all the records from groupMembership that contains the userID of the person deleting his/her own account. It appears to work when I run the following statements in sqlplus:
delete from profile where (userID = '1');
select * from groupMembership where (userID = '1');
But when I try to delete an account through a java interface using JDBC I get the following error:
Machine Error: java.sql.SQLException: ORA-04091: table *****.GROUPMEMBERSHIP is mutating, trigger/function may not see it
ORA-06512: at "*****.DROPACCOUNT", line 2
ORA-04088: error during execution of trigger '*****.DROPACCOUNT'
The java function basically just executes a delete statement.
View 1 Replies
View Related
