I had used a When-Validate-Item trigger against an text item.
Also i had a push button (EXIT) for Exiting from the Form with code : Exit_Form(no_validation);
But if an invalid text is entered in the Text-Item and after that if i use the EXIT push Button then it doesnot exit from the Form till a valid text is entered inside the Text-Item.
how to Exit from Form even if the Text-Item has Invalid Value.
We are using Oracle APPS. Currently We develop the Separate Responsibility in it.
In a Entry Screen, it contains three Blocks. During the Close through the Close Button in Top(Like (X)), It move to Another Block after close that window then only the form Closing.
In the same form when we press the F4 it Exit Without that Operation.
I have seen the Skill builder plugin for Save Before Exit, and it looks great.
Unfortunately, my project is using apex 3.2.
Is there a recommended way to achieve this for a tabular for in apex 3.2.
I just need to create a login form ..its like user will login using his given id and password will be encryted when entering and i just need to simple validation that if he has entered corrected password it will display message ok or else wrong password.
View 3 Replies View RelatedIn my form i have a multi record block which is based on a table in which i am performing insertion, deletion, updation.
My requirement is as below,
While saving a records i want to check distinct value of specific item can not be greater than some value say 2. Then only my records should be saved. I am planning to populate those values in a collection table type and take the distinct values from it. How to populate record values in a collection table type.
I use apex 4.1..I have a tabular form a select like this
select
"STRATEGYID",
"STRATEGYID" STRATEGYID_DISPLAY,
"STRATEGYNAME",
"ISAVTIVE",
"STRATEGYSTARTYEAR",
"STRATEGYSTOPTYEAR",
"STRATEGYTYPEID"
from "#OWNER#"."STRATEGY"
where ISAVTIVE = 1STRATEGYSTARTYEAR and STRATEGYSTOPTYEAR as a Select List contain a value of year
I select from LOV like this
select y l, y v
from (select extract(year from sysdate) + rownum - 1y from dual connect by rownum <= 51)and
I have to Validate STRATEGYSTARTYEAR must Less than STRATEGYSTOPTYEAR
i have a form based on tab canvas. for some values(on form) i am hiding some fileds or a complete frame on the form using stack canvas. it works fine but if a user enters a wrong value in some field i.e enters character in number field the stack canvas hides(showing the hidden fields).
I tried to use on error trigger at form level and when validate item trigger to show the canvas but it first hides the canvas once right value is entered it just shows canvas again. following is the code i wrote
IF MESSAGE_TYPE = 'FRM' AND MESSAGE_CODE IN ('40209','50016')
AND :SYSTEM.TRIGGER_ITEM IN (some field)
THEN
IF other_item_value = 'E' THEN
SHOW_VIEW('STK_CAN_ARL_INFO');
END IF;
I need not to hide the canvas in any case whether any other field on the form is validated or not.
Is it possible to create a validation for tabular form which will be fired only for created?
There is a possibility in APEX 4.1 to choose two types of "*Execution scope*" first is "*For created and Modified Rows*" and second is "*All Submitted Rows*".
I have received a service ticket from QA regarding one of the application forms does not close out even after the exit button is pressed. Instead, it goes to the previous record and continues to do so if there are multiple applications created and then exits at that point.
The end users are not liking that feature and I am unable to detect this error.. What kind of trigger should i apply and what do i write in this trigger.
Suppose have the following condition in my procedure :
IF var_count = 0 then
'stop processing' --EXIT PROCEDURE
ELSE
'continue processing'
END IF;
How do I stop futher processing if var_count= 0 . I think about raising an exception...but is there another way out..like a command 'exit' to stop further processing ?
I cann't commit form when new instance form with form status is "NEW".
And then i call:
Text_Item := WebUtil_File.File_Selection_Dialog('', '', 'Excel 2003|*.xls|Excel 2010|*.xlsx|All File|*.*', 'Select a file to Import', Open_File, True);
Form status change to "QUERY"
And then i click button "Import Data" from excel file to Data Block. Now form status change to "CHANGED". But i cannot call "Commit_Form" built-in to insert data to database oracle 10g.
How do I coding My Exit Button
This Is My Code
-------------------
Declare
obutton number;
begin
obutton := Show_alert('ALT_EXIT');
clear_block(no_validate);
If obutton = ALERT_BUTTON1 Then
-- commit;
exit_form(no_validate);
else
exit_form(no_validate);
end if;
end;
--------------------
But When I pressed Yes Or No the database is not update. Why ? I have save My data with save button already no problem but why i close this form The data is'nt save?
So i have to put "summit;" in it when ALT_EXIT pass another warning* appear how do i exit program without the second warning
*it say about"2 record i already updated" about this but i can't remember exactly.
I have problem writing condition to exit the for loop..How can I exit after finish printing
PROCEDURE find_stu_age_given_id(s_sid number)
is
cursor c1 is select * from student where sid=s_sid;
age number;
begin
For i in c1
LOOP
age :=to_char(SYSDATE -i.dob);
dbms_output.put_line(i.sid ||' age is '|| age/365);
END LOOP;
end find_stu_age_given_id;
I have created one master detail form where on master i have one field with name status and if the status is changed to A it will prompt me to another detail block where i will fill the details and in case after i entered the details and then i decide it not to save and come back to main form without saving...how i can do it . I used go_blok In detail to go to master it goes to master but when i am saving the master the details get saved along with it.I dont want to save the detail and go to master block.
View 1 Replies View RelatedI have a series of sql files that I need to execute via sqlplus. What I do need is to immediately exit the sqlplus instance upon completion of the script. Now, I am not using a batch file, nor a file containing script files where I can add the EXIT command.
I have to effectively run each script from the command line as such:
sqlplus user/pass@server @c: empsomedirsomeScript.sql
Now this works, but once it runs the SQLPlus window is still open. Now I have an event handler (in a c# wrapper) that is supposed to fire once the process terminates...but of course, this even never fires since the sqlplus process doesn't terminate after running the script.
Is there any any any any way to get sqlplus to run this script and then self-exit??
I have no control of the sql script and cannot edit them to include an EXIT command. I need to run them as is.
I would like to exit from a cursor loop based on certain conditional checking. I am checking for a lot of different parameters and if they fail, I want to bypass it and fetch the next record in the cursor. I tried just putting an 'Exit' statement in the logic, but it fails. An example of my code is below:
For Row1 in cursor1
Loop
If amount < 0 then
balance := 0;
Else
[code]...
I have a scenario where I want to exit out of SQLPLUS.
SQL> declare
2 x number(10) :=1;
3 y number(10) :=2;
4 begin
5 if x=y then
[code]...
I am running 3 for loops in continuation. These loops retrieve me 63 values. I need to insert 1 single row in a table and then exit from the same. Moreover when i run the same loop again I need to insert 2nd value fo the second row in the table. The table is having a unique key which does not allow me to load redundant data.
View 2 Replies View RelatedIn this scenario(within procedure) 1st cursor return data but 2nd cursor showing error like ORA-00942: table or view does not exit.
declare
cursor r1 is
select table_name,table_partition_name
from abc
where table_partition_name like 'NORMAL_P%'
and base_table_name like 'NORMAL'
and date_column_name like 'C_DATE'
and to_date(to_char(from_date,'dd/mon/yyyy'),'dd/mon/yyyy') between '25-jun-2010' and '27-jun-2010'
order by substr(table_partition_name,19,4);
[code].....
I have a tar.gz file when i issue command like this to untar,
mysql@test ~]$ tar xfvz mysql-advanced-5.5.17-linux2.6-x86_64.tar.gz
output:
mysql-advanced-5.5.17-linux2.6-x86_64/bin/mysql2mysql
mysql-advanced-5.5.17-linux2.6-x86_64/bin/mysqlslap
tar: skipping to next header
tar: Archive contains obsolescent base-64 headers incomplete literal tree
gzip: stdin: invalid compressed data--format violated
tar: Child returned status 1
tar: Error exit delayed from previous errors
But when i check i found the file like below,
mysql@test ~]$ ls
mysql-advanced-5.5.17-linux2.6-x86_64
This means its completly untar the file?Why that error is showing?
I have all my tables populated but for one table in particular everytime i shut down the command prompt the rows i created erase themselves. Even when i try to bring up that same table in TOAD while the command prompt is still open all the other tables besides that one in particular wont show my rows. What is going on? I was previously messing with some functions and triggers for that table but i can't remember what exactly I was trying to do. Could that have something to do with it?
View 3 Replies View RelatedI am using the notification from COM.ORACLE.APEX.GRITTER_NOTIFICATION but i am trying to make the exit button/icon be displayed all time. By default the exit / close button only appears when mouse over it what about if i want the icon to be displayed all time?
View 1 Replies View RelatedI have a script which connects to Oracle and return 2 date value. few days back the database was down and when the script execute and return same garbage value in the spool file.
I added a exception handler WHENEVER SQLERROR EXIT 1 befor the connection start and after connection start. But in both the case it is also writing to the spool file.
I would like to exit the connection with a value <> 0 if any connection issue happens like (user id, password, database down error type of issue.) No information should go to the spool file
Output=`$ORACLE_HOME/bin/sqlplus -S /nolog << EOF
CONNECT $Usr/$Pwd@$Server
WHENEVER SQLERROR EXIT 1
spool ${ROOT_DIR}/.delta_date.tmp
[code]....
Iam using Oracle DB 10g on HP-UX and accessing reports from windows based server as pdf format , After generating report i can save a copy only no exit option from reports and force to exit with shift+f4.
View 4 Replies View RelatedI am trying to xcom the file from Linux server location to Windows server location through shell script. When i execute my DBMS_SCHEDULER to trigger the shell script i am getting the below mentioned error.
Error report:
ORA-27369: job of type EXECUTABLE failed with exit Exchange full
ORA-06512: at "SYS.DBMS_ISCHED", line 150
ORA-06512: at "SYS.DBMS_SCHEDULER", line 441
ORA-06512: at "CUSTDOMAIN.TSC_041_REPORT_PRC", line 50
[code]....
I have a situation where one form calls another. I am opening the other form(say B) using the below code.
declare
temp_form formmodule;
begin
temp_form := FIND_FORM ('D:RSSQ2TestingpurposesMODULE3_MULTIPLE');
[code]...
On Form B there is an Exit button on click of which it closes the Form B and returns to Form A
begin
close_form('MODULE3_MULTIPLE') ;
end;
In my scenario on Exit from FORM B i need to enable a button on FORM A.I am not able to capture the trigger that fires when I Press the Exit
I am facing a problem while installing Oracle11gR2 in my laptop having windows 7 basic edition. Initially i reached till step 16 which is "Prerequisite check" after giving the schema password . But then suddenly the installer got excited. After that when i again tried to run the installer at the 3rd stage of installation when i am clicking the next button the installer is getting excited.
How to reslove this issue and get oracle 11gR2 installed in my laptop.
I have created a simple external job to run export (expdp) job to be run from PL/SQL. When I create a job as SYS user, the job runs good but the same fails when I execute it as application user. I am certain that I am missing some privileges.
Below is the job:
BEGIN
dbms_scheduler.create_job(
job_name => 'mytestjob',
job_type => 'executable',
job_action => '/u01/myexpdp.sh',
enabled => TRUE,
[code]....
In my Organization I am trying to install oracle ODTwithODAC112030 but one Error showing that is java virtual machine could not find main class program will Exit.
Server Configuration Dell power Edge r510 Windows 2003 64 bit serv PAck 2 Citrix Presentation server 4.5 .
I have data stored in the format 01.01 , 01.02,02.03 in one field of table , i dont want my user to deviate from this coding by not typing like 0001.01 or anything othen than above format , how can i prevent this.
CREATE TABLE OM_AIC_SALES_CODES ( SALE_CODE VARCHAR2(6),SALE_DESC VARCHAR2(240),SALE_MIN_WT NUMBER, SALE_MAX_WT NUMBER)
insert into om_aic_sales_codes ( SALE_CODE ,SALE_DESC ,SALE_MIN_WT , SALE_MAX_WT ) values ('01.01','Extra Light <= 30 kg/m',NULL,NULL);
insert into om_aic_sales_codes ( SALE_CODE ,SALE_DESC ,SALE_MIN_WT , SALE_MAX_WT ) values ('01.02','Light >30 <=60 kg/m',NULL,NULL);
--i dont want the following inserts to happen or invalid inserts.
insert into om_aic_sales_codes ( SALE_CODE ,SALE_DESC ,SALE_MIN_WT , SALE_MAX_WT ) values ('01.003','Light >30 <=60 kg/m',NULL,NULL);
insert into om_aic_sales_codes ( SALE_CODE ,SALE_DESC ,SALE_MIN_WT , SALE_MAX_WT ) values ('001.003','Light >30 <=60 kg/m',NULL,NULL);
insert into om_aic_sales_codes ( SALE_CODE ,SALE_DESC ,SALE_MIN_WT , SALE_MAX_WT ) values ('0001','Light >30 <=60 kg/m',NULL,NULL);