SQL & PL/SQL :: To Insert 1 Single Row In A Table And Then Exit From The Same
Apr 30, 2010
I am running 3 for loops in continuation. These loops retrieve me 63 values. I need to insert 1 single row in a table and then exit from the same. Moreover when i run the same loop again I need to insert 2nd value fo the second row in the table. The table is having a unique key which does not allow me to load redundant data.
View 2 Replies
ADVERTISEMENT
Jul 20, 2011
I have received a service ticket from QA regarding one of the application forms does not close out even after the exit button is pressed. Instead, it goes to the previous record and continues to do so if there are multiple applications created and then exits at that point.
The end users are not liking that feature and I am unable to detect this error.. What kind of trigger should i apply and what do i write in this trigger.
View 7 Replies
View Related
Feb 24, 2012
INSERT INTO LKP_ASSET_LOCATION (LOCATION) VALUES ('AMERICA'S CUP VILLAGE')
View 2 Replies
View Related
Jul 7, 2010
In this scenario(within procedure) 1st cursor return data but 2nd cursor showing error like ORA-00942: table or view does not exit.
declare
cursor r1 is
select table_name,table_partition_name
from abc
where table_partition_name like 'NORMAL_P%'
and base_table_name like 'NORMAL'
and date_column_name like 'C_DATE'
and to_date(to_char(from_date,'dd/mon/yyyy'),'dd/mon/yyyy') between '25-jun-2010' and '27-jun-2010'
order by substr(table_partition_name,19,4);
[code].....
View 3 Replies
View Related
Apr 16, 2013
I have all my tables populated but for one table in particular everytime i shut down the command prompt the rows i created erase themselves. Even when i try to bring up that same table in TOAD while the command prompt is still open all the other tables besides that one in particular wont show my rows. What is going on? I was previously messing with some functions and triggers for that table but i can't remember what exactly I was trying to do. Could that have something to do with it?
View 3 Replies
View Related
Mar 5, 2012
I would like to insert a value if that value is not existing in the table (example for a column which contains date only new dates should be inserted and if the date already exists in the column then it needs to get updated )
example of scenario...
date s1 s2 s3
in the above if the date is new..it should get inserted with the appropriate slot no.(s1,s2,s3) if the date already exists it needs to update the no.in slot no.
View 8 Replies
View Related
Aug 10, 2005
I have multirecord block and I want to disable Inserting/Updating/Deleting more then one record at a time.
View 32 Replies
View Related
Jun 8, 2010
I want to insert multiple record in diff. table by using single query...
how can i di it suppose i hv 3 table table1, table2, table3 i want to insert 2 record on each table respectively..
But i want to do this task by using single query....how can i do it?
View 4 Replies
View Related
Apr 8, 2005
Suppose have the following condition in my procedure :
IF var_count = 0 then
'stop processing' --EXIT PROCEDURE
ELSE
'continue processing'
END IF;
How do I stop futher processing if var_count= 0 . I think about raising an exception...but is there another way out..like a command 'exit' to stop further processing ?
View 3 Replies
View Related
Jun 11, 2004
I had used a When-Validate-Item trigger against an text item.
Also i had a push button (EXIT) for Exiting from the Form with code : Exit_Form(no_validation);
But if an invalid text is entered in the Text-Item and after that if i use the EXIT push Button then it doesnot exit from the Form till a valid text is entered inside the Text-Item.
how to Exit from Form even if the Text-Item has Invalid Value.
View 3 Replies
View Related
Mar 18, 2009
How do I coding My Exit Button
This Is My Code
-------------------
Declare
obutton number;
begin
obutton := Show_alert('ALT_EXIT');
clear_block(no_validate);
If obutton = ALERT_BUTTON1 Then
-- commit;
exit_form(no_validate);
else
exit_form(no_validate);
end if;
end;
--------------------
But When I pressed Yes Or No the database is not update. Why ? I have save My data with save button already no problem but why i close this form The data is'nt save?
So i have to put "summit;" in it when ALT_EXIT pass another warning* appear how do i exit program without the second warning
*it say about"2 record i already updated" about this but i can't remember exactly.
View 1 Replies
View Related
Nov 21, 2011
I have problem writing condition to exit the for loop..How can I exit after finish printing
PROCEDURE find_stu_age_given_id(s_sid number)
is
cursor c1 is select * from student where sid=s_sid;
age number;
begin
For i in c1
LOOP
age :=to_char(SYSDATE -i.dob);
dbms_output.put_line(i.sid ||' age is '|| age/365);
END LOOP;
end find_stu_age_given_id;
View 12 Replies
View Related
Dec 5, 2010
I have created one master detail form where on master i have one field with name status and if the status is changed to A it will prompt me to another detail block where i will fill the details and in case after i entered the details and then i decide it not to save and come back to main form without saving...how i can do it . I used go_blok In detail to go to master it goes to master but when i am saving the master the details get saved along with it.I dont want to save the detail and go to master block.
View 1 Replies
View Related
Jun 12, 2012
primary key constraint on transaction_dtl_bk is affecting the insertion of next correct rows.
CREATE OR REPLACE PROCEDURE NP_DB.san_po_nt_wnpg_1 (
dt DATE
)
IS
v_sql_error VARCHAR2 (100); -- added by sanjiv
v_sqlcode VARCHAR2 (100); ---- added by sanjiv added by sanjiv
[code]...
View 2 Replies
View Related
Jul 17, 2013
Oracle 11gI have a large table of 125 million records - t3_universe. This table never gets updated or altered once loaded, but holds data that we receive from a lead company. I need to select records from this large table that fit certain demographic criteria and insert those into a smaller table - T3_Leads - that will be updated with regard to when the lead is mailed and for other relevant information. select records from this 125 million record table to insert into the smaller table.
I have tried a variety of things - views, materialized views, direct insert into smaller table...I think I am probably missing other approaches. My current attempt has been to create a View using the query that selects the records as shown below. Then use a second query that inserts into T3_Leads from this View V_Market. This is very slow. Can I just use an Insert Into T3_Leads with this query - it did not seem to work with the WITH clause? My Index on the large table is t3_universe_composite and includes zip_code, address_key, household_key.
CREATE VIEW V_Market asWITH got_pairs AS ( SELECT /*+ INDEX_FFS(t3_universe t3_universe_composite) */ l.zip_code, l.zip_plus_4, l.p1_givenname, l.surname, l.address, l.city, l.state, l.household_key, l.hh_type as l_hh_type, l.address_key, l.narrowband_income, l.p1_ms, l.p1_gender, l.p1_exact_age, l.p1_personkey, e.hh_type as filler_data, 1.p1_seq_no, l.p2_seq_no , ROW_NUMBER () OVER ( PARTITION BY l.address_key ORDER BY l.hh_verification_date DESC ) AS r_num FROM t3_universe e JOIN t3_universe l ON l.address_key = e.address_key AND l.zip_code = e.zip_code AND l.p1_gender != e.p1_gender
[code]....
View 2 Replies
View Related
Feb 20, 2013
I have a table with a BLOB column ;
I want read data from table and insert to another table with a cursor
My code is :
procedure read_data is
cursor get_data is
select id,image from picture1;
id1 number;
pic blob;
begin
open get_data;
[code]....
when I run form , error FRM-40734 occurred
error in line " fetch .... "
View 1 Replies
View Related
Dec 9, 2009
I have a series of sql files that I need to execute via sqlplus. What I do need is to immediately exit the sqlplus instance upon completion of the script. Now, I am not using a batch file, nor a file containing script files where I can add the EXIT command.
I have to effectively run each script from the command line as such:
sqlplus user/pass@server @c: empsomedirsomeScript.sql
Now this works, but once it runs the SQLPlus window is still open. Now I have an event handler (in a c# wrapper) that is supposed to fire once the process terminates...but of course, this even never fires since the sqlplus process doesn't terminate after running the script.
Is there any any any any way to get sqlplus to run this script and then self-exit??
I have no control of the sql script and cannot edit them to include an EXIT command. I need to run them as is.
View 5 Replies
View Related
Jul 25, 2011
I would like to exit from a cursor loop based on certain conditional checking. I am checking for a lot of different parameters and if they fail, I want to bypass it and fetch the next record in the cursor. I tried just putting an 'Exit' statement in the logic, but it fails. An example of my code is below:
For Row1 in cursor1
Loop
If amount < 0 then
balance := 0;
Else
[code]...
View 8 Replies
View Related
Dec 4, 2011
I have a scenario where I want to exit out of SQLPLUS.
SQL> declare
2 x number(10) :=1;
3 y number(10) :=2;
4 begin
5 if x=y then
[code]...
View 3 Replies
View Related
May 2, 2013
I have a tar.gz file when i issue command like this to untar,
mysql@test ~]$ tar xfvz mysql-advanced-5.5.17-linux2.6-x86_64.tar.gz
output:
mysql-advanced-5.5.17-linux2.6-x86_64/bin/mysql2mysql
mysql-advanced-5.5.17-linux2.6-x86_64/bin/mysqlslap
tar: skipping to next header
tar: Archive contains obsolescent base-64 headers incomplete literal tree
gzip: stdin: invalid compressed data--format violated
tar: Child returned status 1
tar: Error exit delayed from previous errors
But when i check i found the file like below,
mysql@test ~]$ ls
mysql-advanced-5.5.17-linux2.6-x86_64
This means its completly untar the file?Why that error is showing?
View 2 Replies
View Related
Aug 24, 2013
My scenario is I need to insert into History table when a record is been updated into a tabular form(insert the updated record along with the additional columns Action_by,Action_type(Like Update or delete) and Action Date Into History table i.e History table contains all the records as the main table which is been visible in tabular form along with these additional columns ...Action_by,action_type and action_date.
So now i dont want to create a befor/after update trigger on base table rather i would like to create a generic procedure which will insert the updated record into history table taking the page alias and pade ID as the parameters(GENERIC procedure is nothing but whcih applies to all the tabular forms(Tables) contained int he application ).
View 2 Replies
View Related
Dec 28, 2010
I need to take a snapshot of a table before insert or update happens to that table.... in oracle 10g. I am reading the MV docs from oracle and below link..
[URL].......
how MV should be written for this and how to schedule it in dbms_jobs for auto refresh?
assuming that t1 is the table where DML operation are goin to happen so before any insert or update, snapshot has to be taken, and I am assuming that to do this it would look something like this?
create materialized view my_view refresh fast as select * from t1;
create materialized view log on my_view;
and then schedule in a dbms_jobs?
View 1 Replies
View Related
Mar 25, 2013
following is the requirement
External Table
WKSHT_FILE_EXT
wksht_line
Export Table
Wksht_export
global_idvarchar2(10)
wksht_linevarchar2(250)
[code]....
Step 1.Insert all records from the external table into the export table. Truncate the export table first
Step 2.Read in a record from the export map table
Step 3.Search through export table records looking for the key words BRANCH =. Compare the branch code with the branch code form the map table
Step 4.If a match is found mark all records in the export table for the worksheet with the global ID from the export map table as follows..The first line of a worksheet is marked by the words WKSHTS..The last line of the work sheet is marked by the words COMPANY CONFIDENTIAL..We will need to capture the line break so also mark the next line after the COMPANY CONFIDENTIAL line
Step 5.Continue with Steps 2 - 4 until all records have been processed from the export map table.
first I have to create a procedure ti insert data from external table to export table.Global id will be blank.it will be updated by the mapping table's Global Id when The EB COLUMN's data(i.e 8p,2Betc ) will match with the BRANC=NA,2Betc of the datasheet loaded from the external table.. FOLLOWING IS THE SAMPLE DATASHEET
WKSHTS AAAAA BBBBBBBBBBB ELECTRONICS INC. TIME REPORT-DATE PAGE
SORT - BR, SLSREP AEC FIELD SALES REPRESENTATIVE 16:14 09/21/12 1
BRANCH = 2B
EMPLOYEE NAME SALVAAG, GREGG Days in the Month 28
[code]....
THERE ARE 2 pages..I have to split this LONG REPORT STORED IN WKSHT_LINE COLUMN OF EXPORT TABLE to 2 records..like wise 500 pages are there means 500 records.. AND THEN FIND BRANCH= after that which two words will come i.e NA,2B etc if it will MATCH WITH MAPPING TABLE"S EB COLUMN"S DATA,THEN MAPPING TABLE's GLOBAL ID WILL BE UPDATED TO EXPORT TABLE's GLOBAL ID WHICH IS BLANK
View 1 Replies
View Related
Oct 12, 2010
Below is my trigger:
CREATE OR REPLACE
TRIGGER AR_BANDS_TEST
BEFORE INSERT OR DELETE OR UPDATE ON FEE_BANDS
REFERENCING OLD AS OLD NEW AS NEW
FOR EACH ROW
BEGIN
[code]...
I want the old and new values to come in a single row of the table while inserting in trigger like below:
OLD_FEE_RU OLD_FEE_BANDS_ID OLD_RATE_NUMBER OLD_RATE_PERCENT NEW_FEE_RU NEW_FEE_BANDS_ID NEW_RATE_NU
---------- ---------------- --------------- ---------------- ---------- ---------------- -----------
TESTALL 1 0 1 TESTALL 1 0
View 7 Replies
View Related
Jan 24, 2011
Is there any limitations for the number of column defined inside the table?
View 3 Replies
View Related
Feb 3, 2012
We are using Oracle APPS. Currently We develop the Separate Responsibility in it.
In a Entry Screen, it contains three Blocks. During the Close through the Close Button in Top(Like (X)), It move to Another Block after close that window then only the form Closing.
In the same form when we press the F4 it Exit Without that Operation.
View 3 Replies
View Related
Jan 24, 2013
I am using the notification from COM.ORACLE.APEX.GRITTER_NOTIFICATION but i am trying to make the exit button/icon be displayed all time. By default the exit / close button only appears when mouse over it what about if i want the icon to be displayed all time?
View 1 Replies
View Related
Nov 16, 2012
I am trying to load a single column into a Table. Below is the ctl file:
OPTIONS (ERRORS=10000)
LOAD DATA
TRUNCATE
INTO TABLE "ECOMM"."CC_ECOMM"
TRAILING NULLCOLS
(EMAIL_ID)
Calling loader:
sqlldr silent=ALL userid=username/password@DB control=/home/DEV/control/CC_ECOMM.CTL log=/home/DEV/log/Unsubs.log bad=/home/DEV/log/Unsubs.bad discard=/home/DEV/log/Unsubs.dis data=/home/DEV/files/CC_ECOMM.TXT
Though the count in the Table after load is the same as the input file, they are all NULL.
I tried adding FIELDS TERMINATED BY X'A' for new line and also FIELDS TERMINATED BY X'D' for carriage return. Both times bad file was created and the records that were loaded were again NULL.
The input file has a list of emails:
iatraveler2008@aol.com
iaz65@aol.com
2blue2brown@comcast.net
2c3mwilson@embarqmail.com
abigailolschan@comcast.net
imisskoco@aol.com
I tried FIELDS TERMINATED BY X'10' and FIELDS TERMINATED BY X'13' too for new line and carriage return respectively. This time there were no bad file created, but the Table has Null values.
Log File contents:
Number to load: ALL
Number to skip: 0
Errors allowed: 10000
Bind array: 64 rows, maximum of 256000 bytes
Continuation: none specified
Path used: Conventional
Silent options: FEEDBACK, ERRORS and DISCARDS
[code]....
View 4 Replies
View Related
Mar 6, 2010
I have one table called posh, which has about 50,000 ids (millions of rows) so far. It is currently at about 50 gb. So each series of rows for a particular id is about 1 mb.
CREATE CLUSTER posh_cluster (id int)
SIZE 2M
STORAGE (initial 2000K next 2000K)
PARALLEL 4;
CREATE INDEX posh_cluster_index ON CLUSTER posh_cluster;
[code].......
According to the Oracle documentation size is "the average cluster key size", I am not really sure what that means. Is this the 1mb in posh table space I am using for each series of rows for an id, or the space used for the index? Secondly, the storage parameter for 'CREATE CLUSTER' should be what?
View 11 Replies
View Related
May 27, 2010
How can i copy a single column from one table to another. Table 1 has a column with data in it, table 2 has the column but is empty, i want to copy data for a single column from table1 to table 2. By the way these table have multiple columns.
View 8 Replies
View Related