Express Edition (XE) :: Oracle Doesn't Start Correctly With 3G Router
Oct 7, 2013
I have used a HUAWEI dongle directly connected to my PC. First, the operating system and Oracle start up, then I connect to the internet using the Huawei Mobile Partner utility. Any application can connect to Oracle and use it correctly. All OK. Now I have added a 3G router which is connected to the PC by ethernet cable and has the Huawei dongle connected to a USB port on the router. All works correctly if I follow the sequence:
1) Start the PC with the router switched off, and wait until Oracle has fully started.
2) Power the router up and wait 2 minutes until Windows says the 100 Mb ethernet link is open. Oracle.exe in Task Manager is about 210 Mb, and sometimes more, depending on activity.
However, if I switch on the router first and then start the PC, Oracle does not start correctly. It rejects connection requests forever more, indicating Network Adapter could not establish the connection: Code 17002.In Task Manager Oracle.exe occupies only 145Mb. What can I do to get it to start correctly ? I can dig into Listener.ORA, TNSNAMES.ORA and HOSTS without any problems, and have often modified them manually (not the case here), but logs and traces escape me !
View 3 Replies
ADVERTISEMENT
Sep 3, 2013
I am running Ubuntu 13.04. I am attempting to install Oracle XE 11g R2. It seems that everything was fine until I got to configuration of the database as root I ran /etc/init.d/oracle-xe configure command. I have received the following output
Starting Oracle Net Listener...Done
Configuring database...
Database Configuration failed. Look into /u01/app/oracle/product/11.2.0/xe/config/log for details
When I look at the logs I get the following error ORA-01034: ORACLE not available. After receiving this error I have attempted to start Oracle manually.
sqlplus "/as sysdba"
SQL*Plus: Release 11.2.0.2.0 Production on Tue Sep 3 11:34:07 2013
Copyright (c) 1982, 2011, Oracle. All rights reserved.
Connected to an idle instance.
SQL> startup
ORA-00845: MEMORY_TARGET not supported on this system
As you can see I got
ORA-00845: MEMORY_TARGET not supported on this system error. Ok let's see what's going on with my partitions
/u01/app/oracle/product/11.2.0/xe/config/log# df -h
Filesystem Size Used Avail Use% Mounted on
/dev/sda1 46G 9.7G 34G 23% /
none 4.0K 0 4.0K 0% /sys/fs/cgroup
[code]...
View 4 Replies
View Related
Sep 29, 2007
am having problems starting Oracle Database 10g Express Edition on Fedora. Here is what I did in order to start it:
[root@x1-6-00-c0-9f-bb-ba-57 ~]# /etc/init.d/oracle-xe start
[root@x1-6-00-c0-9f-bb-ba-57 ~]# xhost +
access control disabled, clients can connect from any host
Not sure what I am doing wrong here.
View 2 Replies
View Related
Oct 3, 2012
I've installed oracle 11.2 in Windows 7 - 64 bits. Everything was working fine until suddenly stops working. Oracle Service (OracleServiceORCL) doesn't start and when I try to start manually, returns OS error 1067. Listener starts well. Below I list my listener.ora, sqlnames.ora and sqlnet.ora
# listener.ora Network Configuration File: C:appmbaproduct11.2.0dbhome_1
etworkadminlistener.ora
# Generated by Oracle configuration tools.
SID_LIST_LISTENER =
(SID_LIST =
(SID_DESC =
[code]....
View 3 Replies
View Related
Jul 1, 2010
I have a problem with my DB agent. it doesn't upload data correctly, so I can't see updated information in first page of EM ( it doesn't show cpu usage, Active Sessions, Listener properties,...). when I checked the logs, I found that emagent.trc shows this error: "exceed max amount of upload data: 77 files, 52M, disabling collections warn : collector : disable collector"
( I use Oracle Database 10g on Suse Linux 10.2)
View 3 Replies
View Related
Oct 18, 2012
I would like to install Oracle Express Edition on Linux. I have some troubles on x64 architecture of Linux with win32 progs that runs via wine. And I need Oracle for developing. So, I would like install x32 Oracle Express Edition, but I can't find it anywhere. Is it exists.
Why is Oracle Express Edition 32x exist for windows, but there is not Oracle Express Edition 32x for Linux? We are using widely Oracle 10g. And there is many special difference with 11g. But there is no anywhere 10g version. Where can I download it (for Linux)?
View 2 Replies
View Related
Mar 15, 2010
cmd>emctl start dbconsole
while i run above command it gives following error. what should i do to make my EM run?
error:::EM Configuration issue. C:oracleproduct10.2.0db_1/Abhishek-PC_orcl not found .
View 1 Replies
View Related
Dec 10, 2012
I tried to uninstall Oracle XE 11g and i got 1402 error from Windows Error: [URL]...
what is happening. I can not uninstall or repair either.
View 5 Replies
View Related
Feb 28, 2012
I want to do horizontal fragmentation of a table say employee. But fragmentation is often related to distributed databases. So i want to ask how can i do this on my single home computer? list out the steps that should be performed. I saw the concept of link but really failed to understand that.
View 14 Replies
View Related
Mar 2, 2007
I have downloaded oracle 10g express edition. I have tried to connect forms 6i in that in windows xp environment but when i tried to connect it is not connecting and giving "don't send" error.
If there is any patch to connect forms 6i into oracle 10g express edition.
View 3 Replies
View Related
Sep 28, 2012
i am using windows xp home edition (with oracle 11g r2). oracle installed with out any problems but when i click get started internet explorer it says(internet explorer cannot display the webpage) this is the address get started open up to [URL]...but does not work.
View 7 Replies
View Related
Oct 10, 2013
could i no longer install oracle 9i.2. should i install other version of oracle as 11g XE. What possible steps should I take than Q.
View 8 Replies
View Related
Jul 16, 2012
I'm able to use Oracle 11g Standard/Enterprise Edition with Atomikos for XA transactions.(XADMS).
My question is Can I Use Oracle DB 11g Express Edition with Atomikos for XA Transactions.
View 4 Replies
View Related
Aug 16, 2012
My Oracle 10G Expression Edition Account locked gets locked, where to raise the request to unlocking my account.as my user name:system
View 4 Replies
View Related
Jan 11, 2013
I installed Oracle 11g Express edition in my local Machine(Windows 7).listener.ora, tnsnames.ora files seems fine. Service and listener are running; While trying to connect to the my db sqlplus>connect sys/oracle as sysdba
I am getting "ora - 12543 TNS: destination host unreachable."
what could be the issue. Find below listener.ora, sqlnet.ora, tnsnames.ora files:=
listener.ora file:=
SID_LIST_LISTENER =
(SID_LIST =
(SID_DESC =
(SID_NAME = PLSExtProc)
[code]....
View 1 Replies
View Related
Apr 29, 2011
Is full text search possible in oracle 10g express edition. If so, how is it possible. I browsed many places but couldn't find that.
View 1 Replies
View Related
Mar 13, 2013
I am installed the Oracle database following the this link .
1.Downloaded 11g express edition
2.Created a new user 'oracle' under the group dba. Following steps are executed using this.
3.unzip oracle-xe-11.2.0-1.0.x86_64.rpm.zip and then Converted the rpm to the Ubuntu package
sudo alien --scripts -d oracle-xe-11.2.0-1.0.x86_64.rpm
4.Created /sbin/chkconfig file and added the entries as specified here
5.Created /etc/sysctl.d/60-oracle.conf and added the entries as specified in same link as above.
6.Below steps:
ln -s /usr/bin/awk /bin/awk
mkdir /var/lock/subsys
touch /var/lock/subsys/listener
7.sudo dpkg --install oracle-xe_11.2.0-2_amd64.deb (.deb generated in step 3)
8.sudo /etc/init.d/oracle-xe configure (left the default values as it is)
9.Set the following env variables in ~/.bashrc file
export ORACLE_HOME=/u01/app/oracle/product/11.2.0/xe
export ORACLE_SID=XE
export NLS_LANG=`$ORACLE_HOME/bin/nls_lang.sh`
export ORACLE_BASE=/u01/app/oracle
export LD_LIBRARY_PATH=$ORACLE_HOME/lib:$LD_LIBRARY_PATH
export PATH=$ORACLE_HOME/bin:$PATH
[code]....
Now when exectute any SQL statements on SQLplus, i end up with the following error
SQL> select * from dual;
select * from dual
*
ERROR at line 1:
ORA-01034: ORACLE not available
Process ID: 0
Session ID: 0 Serial number: 0
I have increased the swap memory as specified in here
free -m
total used free shared buffers cached
Mem: 3901 3428 473 0 182 1988
-/+ buffers/cache: 1258 2643
Swap: 5066 0 5066
View 6 Replies
View Related
Oct 5, 2012
I have a table. It's name is INSTITUTION. It has a NUMBER INS_ID and NVARCHAR2(50) INS_NAME . INS_NAME can contain Turkish characters, such as "ğ,ü,ş,ç,ö". According to business logic, there can not be a repetition on the INS_NAME.User will enter institution name from a textbox in ASP.NET , and I check this name in database from c sharp code, if there is no repetition, we will add this record.
The problem is; when user enter a instition name that contains Turkish character, there is a duplication. If there is a instition name is *"su işleri"* , the both query; SELECT * FROM INSTITUTION WHERE INS_NAME = *'su işleri'*; and SELECT * FROM INSTITUTION WHERE INS_NAME = *'su isleri'*; returns no result, even though there it is.But if instition name is "oracle corporation" (there is no Turkish character) it query successfully. I have the same problem in Toad for Oracle 11.5.1.2. When I query database from toad SELECT * FROM INSTITUTION, the phrase *"su işleri"* has appeared. But when I query SELECT * FROM INSTITUTION WHERE INS_NAME = *'su işleri'*; , there is again no result.When I connect oracle database directly and perform the query SELECT * FROM INSTITUTION , the phrase *"su isleri"* (not *"su işleri"* ) has appeared.
Here are the language settings of the database:
National Language Support
National Language Parameter Value
NLS_CALENDAR______________GREGORIAN
NLS_CHARACTERSET__________WE8MSWIN1252
NLS_COMP__________________BINARY
NLS_CURRENCY______________TL
NLS_DATE_FORMAT__________DD/MM/RRRR
NLS_DATE_LANGUAGE________TURKISH
NLS_DUAL_CURRENCY_________YTL
[code]....
View 8 Replies
View Related
Nov 6, 2012
I am using oracle 11g Express Edition, I have a file of .csv forma, Which has a data of size 500MB which needs to be uploaded into oracle table.
Which would be the best method to upload the data into table. Data is employee ticket history which is of huge data.
How to do the mass upload of data into oracle table.
View 3 Replies
View Related
Feb 5, 2013
I decided to use Oracle 11g XE on Linux Mint. I read this tutorial Oracle 11gR2 Express Edition on Linux Ubuntu 11.10 howto included the seventh part. However, I did a minor change in the script given. Indeed, since Ubuntu 12.04, a bug appeared. So I use the following script :
cat > /etc/init.d/oracle-shm <<-EOF
#! /bin/sh
# /etc/init.d/oracle-shm
#
#
case "$1" in
start)
[code]...
I already uninstalled and reinstalled Oracle 3-4 times, but nothing else happened. When I want to configure oracle-xe, I have a such message :
Starting Oracle Net Listener...Done
Configuring database...
Database Configuration failed. Look into /u01/app/oracle/product/11.2.0/xe/config/log for detailsAnd this is the content of the file postDBCreation.log :
begin
*
ERROR at line 1:
ORA-01034: ORACLE not available
Process ID: 0
Session ID: 0 Serial number: 0
[code]...
View 3 Replies
View Related
Aug 14, 2012
I have a page process that calls back end PL/SQL. I have a page item that is populated by said PL/SQL procedure, P35_PROCESSING_MSG. As you know the Process allows me to specify a message for Success and another for Failure. My desire is that, if there is a back end failure, the error will display in the dialog area, using the built-in "Process Error Message" functionality. Instead, after execution, the page item still has its default value and the following, ugly, error displays in the tabular report region.
report error:
ORA-20001: Error fetching column value: ORA-01403: no data found
ORA-06510: PL/SQL: unhandled user-defined exception
I just don't get why it displays here instead of in the usual failure area. Moreover, I don't understand why the error is "*+unhandled+* user-defined exception" when, as you will see, I have handled it.
I have a page process to perform custom MRD for a tabular form. (I don't think this is really germane to the more generic issue but, I bring it up as an explanation for the following code sample). I am deliberately causing a DIVIDE BY ZERO error to test the error handling form the back end.
PROCEDURE PROCESS_MARGIN_CALL_DELETES( as_StatusMsg OUT VARCHAR2 )
IS
lb_InnerErrorOccured BOOLEAN := FALSE;
ln_DeleteTargetCnt NUMBER := 0;
ln_DeleteTargetRow NUMBER := 0;
BEGIN
[code].......
View 20 Replies
View Related
Aug 21, 2013
I am running my oracle apex application on 4.2.2 on apex.oracle.com. Exporting the application seems to work but when I go to import the application as a copy the regions within a particular page are not working correctly. I want to be able to export the application and import a new copy as a DEV/TEST application and have it function the same way. On the original application the region will display to the right when hovered over the edit button but in the new one it will go to the left and not format correctly.How I would like it is just for the copy application to perform the same way the original copy does. I selected to install all dependent objects and don't know what steps I have missed to have the regions not working like they do on the original application. related to CSS not exporting/importing correctly?
View 0 Replies
View Related
Apr 26, 2012
I have an app that collects data and after some time submits the data to Oracle.
The app. has worked flawlessly for years in different setups.
Now, I have a setup where the clients are in a separate LAN behind a NAT router and the server is on the main LAN.
I get "ORA-03113: end-of-file on communication channel" in different circumstances.
Sometimes it happens, when the app has not been in contact with the database for 15-20 minutes. This can probably be handled by disconnect/connect mechanisms.
But whats worse, sometimes ORA-03113 appears in the middle of continuously submitting hundreds/thousands of rows.
The server does not have routes to access the clients separate LAN, is that part of the reason?
View 1 Replies
View Related
Aug 13, 2012
The thing is I am not getting any output when i run your procedure.I need to set any nls language? .. even i try to run below qry from the another thread,
column french format a20
with t as (
select 'fish' txt from dual union all
select 'dog' txt from dual union all
[code]...
My output is blank for the french values. I am sure that I missing something, But i dont know what I am missing .currently my CHARACTER SET WE8MSWIN1252
View 3 Replies
View Related
Aug 22, 2013
I have an application item that receives a web service result. This result is like 'MARIA','JOSE','JESUS'. I'm using this string into the parameters of the interactive report, but this is not recognized. I'm showing the content of the application item into a pl sql region and the content is 'MARIA','JOSE','JESUS', when I include this application item into the query, the IR shows me 'MARIA','JOSE','JESUS'
View 1 Replies
View Related
Nov 2, 2008
Just installed Ora 10g Express Edition. It has a sample database. But is there a rather larger database outside that I can download and import into Oracle for some learning reasons?
View 1 Replies
View Related
Nov 4, 2011
The only supported technique for converting an EE database to SE is export-inport, as documented in note 139642.1. Our client is reluctant to do this because of the downtime involved. It is however possible to open the EE database from an SE home, no problem.
The note says only Quote:When you just install the Standard Edition software, you will end up with Data Dictionary objects which are of no use (or perhaps even invalid) and possibly create problems when maintaining the database.
View 2 Replies
View Related
Jul 23, 2012
I first started database, then gone to option Run SQL command line. After that while creating table it is showing error like "SP2-0640: Not connected."
View 2 Replies
View Related
Nov 29, 2012
I am a new to Oracle, Installed Oracle 11g express edition. Also I had installed Oralce SQL Developer tool but i don't know the user name and password to connect.
what is my default instance? what is my default user name and password? How to connect ?
View 2 Replies
View Related
Oct 23, 2012
I am new to this forum. I want to install XE 11g Release 2 in windows 7 64 bit. Can I intall 'Oracle Database Express Edition 11g Release 2 for Windows x32' or is there is 64bit version?
View 2 Replies
View Related
