am having problems starting Oracle Database 10g Express Edition on Fedora. Here is what I did in order to start it:
[root@x1-6-00-c0-9f-bb-ba-57 ~]# /etc/init.d/oracle-xe start
[root@x1-6-00-c0-9f-bb-ba-57 ~]# xhost +
access control disabled, clients can connect from any host
Not sure what I am doing wrong here.
I am running Ubuntu 13.04. I am attempting to install Oracle XE 11g R2. It seems that everything was fine until I got to configuration of the database as root I ran /etc/init.d/oracle-xe configure command. I have received the following output
Starting Oracle Net Listener...Done
Configuring database...
Database Configuration failed. Look into /u01/app/oracle/product/11.2.0/xe/config/log for details
When I look at the logs I get the following error ORA-01034: ORACLE not available. After receiving this error I have attempted to start Oracle manually.
sqlplus "/as sysdba"
SQL*Plus: Release 11.2.0.2.0 Production on Tue Sep 3 11:34:07 2013
Copyright (c) 1982, 2011, Oracle. All rights reserved.
Connected to an idle instance.
SQL> startup
ORA-00845: MEMORY_TARGET not supported on this system
As you can see I got
ORA-00845: MEMORY_TARGET not supported on this system error. Ok let's see what's going on with my partitions
/u01/app/oracle/product/11.2.0/xe/config/log# df -h
Filesystem Size Used Avail Use% Mounted on
/dev/sda1 46G 9.7G 34G 23% /
none 4.0K 0 4.0K 0% /sys/fs/cgroup
[code]...
I have used a HUAWEI dongle directly connected to my PC. First, the operating system and Oracle start up, then I connect to the internet using the Huawei Mobile Partner utility. Any application can connect to Oracle and use it correctly. All OK. Now I have added a 3G router which is connected to the PC by ethernet cable and has the Huawei dongle connected to a USB port on the router. All works correctly if I follow the sequence:
1) Start the PC with the router switched off, and wait until Oracle has fully started.
2) Power the router up and wait 2 minutes until Windows says the 100 Mb ethernet link is open. Oracle.exe in Task Manager is about 210 Mb, and sometimes more, depending on activity.
However, if I switch on the router first and then start the PC, Oracle does not start correctly. It rejects connection requests forever more, indicating Network Adapter could not establish the connection: Code 17002.In Task Manager Oracle.exe occupies only 145Mb. What can I do to get it to start correctly ? I can dig into Listener.ORA, TNSNAMES.ORA and HOSTS without any problems, and have often modified them manually (not the case here), but logs and traces escape me !
I am installed the Oracle database following the this link .
1.Downloaded 11g express edition
2.Created a new user 'oracle' under the group dba. Following steps are executed using this.
3.unzip oracle-xe-11.2.0-1.0.x86_64.rpm.zip and then Converted the rpm to the Ubuntu package
sudo alien --scripts -d oracle-xe-11.2.0-1.0.x86_64.rpm
4.Created /sbin/chkconfig file and added the entries as specified here
5.Created /etc/sysctl.d/60-oracle.conf and added the entries as specified in same link as above.
6.Below steps:
ln -s /usr/bin/awk /bin/awk
mkdir /var/lock/subsys
touch /var/lock/subsys/listener
7.sudo dpkg --install oracle-xe_11.2.0-2_amd64.deb (.deb generated in step 3)
8.sudo /etc/init.d/oracle-xe configure (left the default values as it is)
9.Set the following env variables in ~/.bashrc file
export ORACLE_HOME=/u01/app/oracle/product/11.2.0/xe
export ORACLE_SID=XE
export NLS_LANG=`$ORACLE_HOME/bin/nls_lang.sh`
export ORACLE_BASE=/u01/app/oracle
export LD_LIBRARY_PATH=$ORACLE_HOME/lib:$LD_LIBRARY_PATH
export PATH=$ORACLE_HOME/bin:$PATH
[code]....
Now when exectute any SQL statements on SQLplus, i end up with the following error
SQL> select * from dual;
select * from dual
*
ERROR at line 1:
ORA-01034: ORACLE not available
Process ID: 0
Session ID: 0 Serial number: 0
I have increased the swap memory as specified in here
free -m
total used free shared buffers cached
Mem: 3901 3428 473 0 182 1988
-/+ buffers/cache: 1258 2643
Swap: 5066 0 5066
Just installed Ora 10g Express Edition. It has a sample database. But is there a rather larger database outside that I can download and import into Oracle for some learning reasons?
View 1 Replies View RelatedI would like to install Oracle Express Edition on Linux. I have some troubles on x64 architecture of Linux with win32 progs that runs via wine. And I need Oracle for developing. So, I would like install x32 Oracle Express Edition, but I can't find it anywhere. Is it exists.
Why is Oracle Express Edition 32x exist for windows, but there is not Oracle Express Edition 32x for Linux? We are using widely Oracle 10g. And there is many special difference with 11g. But there is no anywhere 10g version. Where can I download it (for Linux)?
I tried to uninstall Oracle XE 11g and i got 1402 error from Windows Error: [URL]...
what is happening. I can not uninstall or repair either.
I am using oracle 11g express edition and MY Sql database How to establish database link between them using ODBC gateway. I am using ODBC gateway Mysqlodbc connector.
View 1 Replies View RelatedI want to do horizontal fragmentation of a table say employee. But fragmentation is often related to distributed databases. So i want to ask how can i do this on my single home computer? list out the steps that should be performed. I saw the concept of link but really failed to understand that.
View 14 Replies View RelatedI have downloaded oracle 10g express edition. I have tried to connect forms 6i in that in windows xp environment but when i tried to connect it is not connecting and giving "don't send" error.
If there is any patch to connect forms 6i into oracle 10g express edition.
i am using windows xp home edition (with oracle 11g r2). oracle installed with out any problems but when i click get started internet explorer it says(internet explorer cannot display the webpage) this is the address get started open up to [URL]...but does not work.
View 7 Replies View Relatedcould i no longer install oracle 9i.2. should i install other version of oracle as 11g XE. What possible steps should I take than Q.
View 8 Replies View RelatedI'm able to use Oracle 11g Standard/Enterprise Edition with Atomikos for XA transactions.(XADMS).
My question is Can I Use Oracle DB 11g Express Edition with Atomikos for XA Transactions.
My Oracle 10G Expression Edition Account locked gets locked, where to raise the request to unlocking my account.as my user name:system
View 4 Replies View RelatedI installed Oracle 11g Express edition in my local Machine(Windows 7).listener.ora, tnsnames.ora files seems fine. Service and listener are running; While trying to connect to the my db sqlplus>connect sys/oracle as sysdba
I am getting "ora - 12543 TNS: destination host unreachable."
what could be the issue. Find below listener.ora, sqlnet.ora, tnsnames.ora files:=
listener.ora file:=
SID_LIST_LISTENER =
(SID_LIST =
(SID_DESC =
(SID_NAME = PLSExtProc)
[code]....
Is full text search possible in oracle 10g express edition. If so, how is it possible. I browsed many places but couldn't find that.
View 1 Replies View RelatedI have a table. It's name is INSTITUTION. It has a NUMBER INS_ID and NVARCHAR2(50) INS_NAME . INS_NAME can contain Turkish characters, such as "ğ,ü,ş,ç,ö". According to business logic, there can not be a repetition on the INS_NAME.User will enter institution name from a textbox in ASP.NET , and I check this name in database from c sharp code, if there is no repetition, we will add this record.
The problem is; when user enter a instition name that contains Turkish character, there is a duplication. If there is a instition name is *"su işleri"* , the both query; SELECT * FROM INSTITUTION WHERE INS_NAME = *'su işleri'*; and SELECT * FROM INSTITUTION WHERE INS_NAME = *'su isleri'*; returns no result, even though there it is.But if instition name is "oracle corporation" (there is no Turkish character) it query successfully. I have the same problem in Toad for Oracle 11.5.1.2. When I query database from toad SELECT * FROM INSTITUTION, the phrase *"su işleri"* has appeared. But when I query SELECT * FROM INSTITUTION WHERE INS_NAME = *'su işleri'*; , there is again no result.When I connect oracle database directly and perform the query SELECT * FROM INSTITUTION , the phrase *"su isleri"* (not *"su işleri"* ) has appeared.
Here are the language settings of the database:
National Language Support
National Language Parameter Value
NLS_CALENDAR______________GREGORIAN
NLS_CHARACTERSET__________WE8MSWIN1252
NLS_COMP__________________BINARY
NLS_CURRENCY______________TL
NLS_DATE_FORMAT__________DD/MM/RRRR
NLS_DATE_LANGUAGE________TURKISH
NLS_DUAL_CURRENCY_________YTL
[code]....
I am using oracle 11g Express Edition, I have a file of .csv forma, Which has a data of size 500MB which needs to be uploaded into oracle table.
Which would be the best method to upload the data into table. Data is employee ticket history which is of huge data.
How to do the mass upload of data into oracle table.
I decided to use Oracle 11g XE on Linux Mint. I read this tutorial Oracle 11gR2 Express Edition on Linux Ubuntu 11.10 howto included the seventh part. However, I did a minor change in the script given. Indeed, since Ubuntu 12.04, a bug appeared. So I use the following script :
cat > /etc/init.d/oracle-shm <<-EOF
#! /bin/sh
# /etc/init.d/oracle-shm
#
#
case "$1" in
start)
[code]...
I already uninstalled and reinstalled Oracle 3-4 times, but nothing else happened. When I want to configure oracle-xe, I have a such message :
Starting Oracle Net Listener...Done
Configuring database...
Database Configuration failed. Look into /u01/app/oracle/product/11.2.0/xe/config/log for detailsAnd this is the content of the file postDBCreation.log :
begin
*
ERROR at line 1:
ORA-01034: ORACLE not available
Process ID: 0
Session ID: 0 Serial number: 0
[code]...
i am looking for a free download by oracle meant specifically for Linux. i am using fedora core 5 32 bit version of Linux.
View 1 Replies View RelatedI get this error when trying to log in to SQLPlus in Oracle
ERROR:
ORA-12516: TNS:listener could not find available handler with matching protocol stack
I am querying v$sga and getting variable size : 211337216 bytes.when querying v$sgastat then getting
java Pool : 16777216
Large Pool : 41943040
Shared pool : 398560392
But as per my knowledge following condition should satisfy,but not getting
[code]
Variable sga = java pool + large pool + shared pool
select pool,name,sum(bytes)
from v$sgastat
where pool in ('shared pool','java pool','large pool')
group by pool,name;
Here variable size using v$sga : 211337216 bytes
and java pool + large pool + shared pool : 211302536 bytes.
[/code]
but it should match?
my customer wants to create a standby database for his production database (Oracle Standard Edition 11g R2 @ Windows 2008 R2 64 Bit). Now any proof-of-concept which explains shortly the concept and how to achieve it.
View 4 Replies View RelatedI have been working in the installation of oracle 11g r2 in my fedora 17 (32 bits) system for a few days and still have not gotten.Now I found that I need the OPtatch for enable the db console and even being a member of My Oracle Support I can not request the patch for a technical question.
1) Note to the Approver: I am that one because I am an end user (freelance)
2) Support Identifier: How can I get it?
how to start database in oracle
View 2 Replies View RelatedIssue : NOT able to start the Oracle Data Base 11g on Linux machine
I've successfully installed Oracle-DB-11g on my Linux machine.
Note : I haven't declared or exported any variable(s) , actually I'm not sure how and where to do this.
I cannot start ASM on my Oracle Database Appliance.
crsctl status resource -t says:
ora.asm
ONLINE ONLINE node1 Started
ONLINE ONLINE node2 Started
however, if I try to access the ASMCMD it says:
[grid@node1 ~]$ asmcmd
Connected to an idle instance.
ASMCMD> startup
ORA-00304: requested INSTANCE_NUMBER is busy
Connected to an idle instance.
Oracle Solaris 11
Oracle Database 11.2.0.3
Create a new database using dbca and at the end dbca reports it could not start database control.
The dbca warning window asks to set ORACLE_UNQNAME and to start database control again.
su - oracle
$ . oraenv
rcat
export ORACLE_UNQNAME=rcat
emctl stop dbconsole
emctl start dbconsole
failed...
I tried that and dbconsole still cannot start.
can i start multiple listeners in one oracle database ?
View 7 Replies View RelatedI am facing the problem in windows 7. I have oracle client 10g installed. When i run sqlplus from comand prompt it gives the error as:
C:Userssrirams>sqlplus
SP2-1503: Unable to initialize Oracle call interface
SP2-0152: ORACLE may not be functioning properly
When I select the executable 'sql+' and run as administrator it works fine.