SQL & PL/SQL :: Oracle HttpUriType - Not Getting Output Correctly?
Aug 13, 2012
The thing is I am not getting any output when i run your procedure.I need to set any nls language? .. even i try to run below qry from the another thread,
column french format a20
with t as (
select 'fish' txt from dual union all
select 'dog' txt from dual union all
[code]...
My output is blank for the french values. I am sure that I missing something, But i dont know what I am missing .currently my CHARACTER SET WE8MSWIN1252
View 3 Replies
ADVERTISEMENT
Oct 7, 2013
I have used a HUAWEI dongle directly connected to my PC. First, the operating system and Oracle start up, then I connect to the internet using the Huawei Mobile Partner utility. Any application can connect to Oracle and use it correctly. All OK. Now I have added a 3G router which is connected to the PC by ethernet cable and has the Huawei dongle connected to a USB port on the router. All works correctly if I follow the sequence:
1) Start the PC with the router switched off, and wait until Oracle has fully started.
2) Power the router up and wait 2 minutes until Windows says the 100 Mb ethernet link is open. Oracle.exe in Task Manager is about 210 Mb, and sometimes more, depending on activity.
However, if I switch on the router first and then start the PC, Oracle does not start correctly. It rejects connection requests forever more, indicating Network Adapter could not establish the connection: Code 17002.In Task Manager Oracle.exe occupies only 145Mb. What can I do to get it to start correctly ? I can dig into Listener.ORA, TNSNAMES.ORA and HOSTS without any problems, and have often modified them manually (not the case here), but logs and traces escape me !
View 3 Replies
View Related
Jul 25, 2011
I would like to exit from a cursor loop based on certain conditional checking. I am checking for a lot of different parameters and if they fail, I want to bypass it and fetch the next record in the cursor. I tried just putting an 'Exit' statement in the logic, but it fails. An example of my code is below:
For Row1 in cursor1
Loop
If amount < 0 then
balance := 0;
Else
[code]...
View 8 Replies
View Related
Oct 25, 2012
I am using Oracle Database 11g Enterprise Edition Release 11.2.0.1.0 - 64bit Production installed in IBM AIX 6.1.0.0
I find this peculiar situation that the alert log is not getting update with proper timestamp for example i see an update now under my alert log of this fashion
Tue Oct 23 08:38:46 2012
ARC2 started with pid=37, OS id=50
Tue Oct 23 08:38:46 2012
ARC3 started with pid=38, OS id=178
Tue Oct 23 08:38:46 2012
[Code]...
But the current system time is
Tue Oct 23 18:40:20 GMT+05:30 2012
My memory_target parameter value is 2GB
SQL> SELECT TZ_OFFSET(SESSIONTIMEZONE), TZ_OFFSET(DBTIMEZONE) FROM DUAL;
TZ_OFFS TZ_OFFS
------- -------
+05:30 -05:30
I am clueless.
View 3 Replies
View Related
Dec 7, 2010
I tried google and most of bind example using number instead of character, ?
I have the code as below:
variable oldId varchar2(5)
exec :oldId :='&1'
variable newId varchar2(5)
exec :newId :='&2'
[Code]...
Since in TAB1, ID is defined as varchar2(5), and I have defined both oldId and newId as varchar2(5) in my code, I wonder why it doesn't work.
It returned this error:
DECLARE
*
ERROR at line 1: ORA-01722: invalid number ORA-06512: at line xx
After supply the value for oldId(val2) and newId(val1)
SQL > @thisScript val1 val2
I use dbms_output.put_line to print the command executed, it seems it is doing
UPDATE TABLE1 SET ID = val1 WHERE ID = val2
without the single quote ('val1'), ('val2'). But if I put in single quotes, the output statement
UPDATE TABLE1 SET ID = ':newId' WHERE ID = ':oldId'
The same bind logic works in SQL prompt
SQL > variable oldId varchar2(5);
SQL > variable newId varchar2(5);
SQL > exec :oldId :='val2'
SQL > exec :newId :='val1'
SQL > UPDATE TABLE1 SET ID = :newId WHERE ID = :oldId;
1 row updated.
I am wondering what should I do then? With or without single quotes?
View 9 Replies
View Related
Sep 13, 2012
Im trying spooling a file in DB with below mentioned details.
SET SERVEROUTPUT OFF
set heading on
SET PAUSE OFF
SET FEED OFF
SET PAGES 0
[code]........
file .sql has 20 odd columns.
When file is spooled, it shows no columns headers at the top, why is it happening, I don't want to spool column headers separately.
View 12 Replies
View Related
Apr 11, 2013
I have a block based on a view. The view is a join on 2 tables, the first table always brings back 4 records for each parameter passed to it in the where clause. The second table is outer joined to the first table and may contain no matched records or some matched records. In some cases there will be a 1:1 match to the first table.
The problem is how to create the table handler procedure correctly. I need to update 2 tables in the table handler procedure.
The block is only enabled for update (to preserve the 4 rows), however some values on the block correspond to values from the second table. When you update a row in the block, how do you know if you are actually inserting a row into the second table or updating an already existing record on the 2nd table.
View 1 Replies
View Related
Aug 14, 2012
I have a page process that calls back end PL/SQL. I have a page item that is populated by said PL/SQL procedure, P35_PROCESSING_MSG. As you know the Process allows me to specify a message for Success and another for Failure. My desire is that, if there is a back end failure, the error will display in the dialog area, using the built-in "Process Error Message" functionality. Instead, after execution, the page item still has its default value and the following, ugly, error displays in the tabular report region.
report error:
ORA-20001: Error fetching column value: ORA-01403: no data found
ORA-06510: PL/SQL: unhandled user-defined exception
I just don't get why it displays here instead of in the usual failure area. Moreover, I don't understand why the error is "*+unhandled+* user-defined exception" when, as you will see, I have handled it.
I have a page process to perform custom MRD for a tabular form. (I don't think this is really germane to the more generic issue but, I bring it up as an explanation for the following code sample). I am deliberately causing a DIVIDE BY ZERO error to test the error handling form the back end.
PROCEDURE PROCESS_MARGIN_CALL_DELETES( as_StatusMsg OUT VARCHAR2 )
IS
lb_InnerErrorOccured BOOLEAN := FALSE;
ln_DeleteTargetCnt NUMBER := 0;
ln_DeleteTargetRow NUMBER := 0;
BEGIN
[code].......
View 20 Replies
View Related
Oct 15, 2012
I am using Oracle Database 11g Enterprise Edition Release 11.2.0.1.0 - 64bit Production version
I am having the data in following table -
drop table stud_fact;
create table stud_fact(stud_NM, LVL_CD,ST_DT_DIM_KEY,OVRNK) as select
'ABG Sundal','H','20110630','175' from dual union all select
[Code].....
View 8 Replies
View Related
Jul 1, 2010
I have a problem with my DB agent. it doesn't upload data correctly, so I can't see updated information in first page of EM ( it doesn't show cpu usage, Active Sessions, Listener properties,...). when I checked the logs, I found that emagent.trc shows this error: "exceed max amount of upload data: 77 files, 52M, disabling collections warn : collector : disable collector"
( I use Oracle Database 10g on Suse Linux 10.2)
View 3 Replies
View Related
Aug 21, 2013
I am running my oracle apex application on 4.2.2 on apex.oracle.com. Exporting the application seems to work but when I go to import the application as a copy the regions within a particular page are not working correctly. I want to be able to export the application and import a new copy as a DEV/TEST application and have it function the same way. On the original application the region will display to the right when hovered over the edit button but in the new one it will go to the left and not format correctly.How I would like it is just for the copy application to perform the same way the original copy does. I selected to install all dependent objects and don't know what steps I have missed to have the regions not working like they do on the original application. related to CSS not exporting/importing correctly?
View 0 Replies
View Related
Jul 1, 2013
DECLARE
JOBSFILE UTL_FILE.FILE_TYPE;
-- TAKE ALL JOB TITLES FROM JOBS
CURSOR JOBSCUR IS
SELECT *
-- DDOCNAME,DDOCTITLE,DSECURITYGROUP,DDOCAUTHOR,DDOCTYPE,DINDATE,PRIMARYFILE,EXTRACTIONDATE,BATCH_ID
FROM TARGET_UCM ;
[code].......
this is my plsql here to print table values i am using many utl_file.put_line statements is there any way to print all table values in a single utl_file.put_line.
View 2 Replies
View Related
Aug 5, 2010
I want to pull out the output only when Day is 1 and 2 and 3. I don't want if either Day is 1 or Day is 2 or Day is 3 is present.
Test Case
--Creat Table
create table dummy_name
(name varchar2(5) not null,
day number(3) not null);
--Insert Values
insert into dummy_name values ('A', 1);
insert into dummy_name values ('B', 2);
insert into dummy_name values ('C', 3);
insert into dummy_name values ('B', 1);
insert into dummy_name values ('B', 2);
insert into dummy_name values ('C', 1);
[code]...
View 8 Replies
View Related
Oct 18, 2010
what the following output of the oracle function "dump" means?
query: select dump(:new.messaging_state) from dual
output:
Typ=2 Len=1: 193
I need this debug output because I want to know which value the program wants to write in the columns messaging_state.
The update fails because of a parent Key violation.
View 2 Replies
View Related
Feb 21, 2008
i have a problem with oracle reports 6i. the output has 1000s of lines. in my output first to 999th line is fine..bt then 1000th line is blank and again the data continues to be shown from 1001th line till 2000. and again i see a blank. how can i get rid of these blank lines very 1000th line.
View 3 Replies
View Related
Mar 27, 2013
EMP table
create table emp1 (empno number,deptname varchar2(30),deptno number,sal number);
insert into emp1 values (1,'Bank',10,1000);
insert into emp1 values (1,'Finance',20,400);
insert into emp1 values (2,'Finance',20,4000);
insert into emp1 values (3,'Account',30,3000);
commit;
select * from emp1;
actual output :
empno deptname deptno sal
1 Bank 10 1000
1 Finane 20 400
2 Finane 20 4000
3 Account 30 3000
Expected output :
empno deptname deptno sal
1 Bank 10 1000
2 Finane 20 4000
3 Account 30 3000
I am looking a output like above one. if any empno belongs to deptname Bank then give priority to that values else go to other dept like Finance but empno 1 should return only one row.i.e Bank dept only.
I have to return only one row based on dept values for one empno. how to do in sql or plsql?
View 11 Replies
View Related
Sep 25, 2013
Currently I have a requirement where I need to create 2 more output rows using each result row.
In my requirement I am populating charges table with types of charges, on each line item of charges, I need to apply 2 types of taxes and populate it along with the charge line item. I will be storing charges in table charges and the 2 taxes to be applied in taxes table respectively. For each row of charges, i need to apply these 2 taxes present in taxes table resulting in 3 rows output.
--Create tables charges
create table charges
(
charge_type varchar2(10) ,
charge number
);
[Code]....
My expected output should be like below:
Item_type amount
-------------------- ----------
charge1 100
Charge1_tax1 10
Charge1_tax2 20
charge2 200
Charge2_tax1 20
Charge2_tax2 40
how I can achieve the expected output using a single sql query
View 6 Replies
View Related
Nov 24, 2011
When I run my report , I generate it in pdf format, and some fields in my report have persian characters so
1- I use Tahoma font, and
2- I have change my window registery to america_america.ar8mswin1256 also
3-I have modified UIFONT.ALI (but when I add tahoma font in this file , then I check the font in property menu of pdf file , its type is not change to type3---- I'm not sure about the modfication in this file----)
4- I have added windows/font path in report_path in registry
5- I made sure that there is tahoma.ttF in this path
but after opening PDF file ,those fields which are in Persian language (persian characters) are dipalyed in strange font.
View 2 Replies
View Related
Sep 20, 2012
I am using oracle database 9iR2 (9.2.0.8) on windows 2003 server.
Is there any method to convert following output in to ASCII format ??
select ename from scott.emp;
ENAME
--------
SMITH
ALLEN
WARD
JONES
MARTIN
BLAKE
CLARK
SCOTT
KING
TURNER
ADAMS
View 6 Replies
View Related
Jan 19, 2011
I have a SQL Loader Log File Output. I would like to delete Table Information from the output file.Following is my code.
//PATH OPENED AS TEXT BY STREAM READER
System.IO.StreamReader strm = File.OpenText(batchFileName);
//OUTPUT
[Code]....
View 8 Replies
View Related
Aug 24, 2011
i am generating report from oracle forms using web.show_document .pdf output is coming in seperate url.entire piece of code is working fine.now i want to store this pdf out put in client machine whether path will be specified by user.
View 3 Replies
View Related
Aug 22, 2013
I have an application item that receives a web service result. This result is like 'MARIA','JOSE','JESUS'. I'm using this string into the parameters of the interactive report, but this is not recognized. I'm showing the content of the application item into a pl sql region and the content is 'MARIA','JOSE','JESUS', when I include this application item into the query, the IR shows me 'MARIA','JOSE','JESUS'
View 1 Replies
View Related
Nov 24, 2011
After running my report I generate into the file by delimited type and then I save as it by XLS extension.The problem is each row of this excel file has header repeatedly!
View 4 Replies
View Related
Jan 27, 2012
I have developed one rdf in Text Output Format.In this some special characters is coming for Text Output format of rdf.Shall i do any adjustments in layout? How to remove these special characters?
View 3 Replies
View Related
Jun 15, 2012
i'm using db and forms 10g. i want the output of the form to be embedded within a simple html page. lets say i want the html page to be divided into three frames. the uppermost horizontal frame will hold a banner (say). the left vertical frame will hold some advertisement (say).
(1) now the rest of the page will be covered by the third frame in which the fmx's will run.
(2) i want the login.fmx (startup form) to show up first instead of the servlet. infact the servlet should not show up at all.
View 1 Replies
View Related
Mar 11, 2013
Following query is giving me the required output but i want to use reg_exp from same output.
SELECT TO_NUMBER ((SUBSTR (narr,
INSTR (narr, '#') + 1,
(INSTR (narr, 'DT')) - (INSTR (narr, '#') + 1)
) "Bill No"
FROM (SELECT '25 NOS. BILL BOOK FOR FAISALABAD @80/- TH A.R. PRINTER AGST BILL#21 DT:31-01-2013 TH
[code]...
Required Output using Reg_Exp
SQL>/
Bill No
----------
21
9
View 6 Replies
View Related
Feb 2, 2010
One function returns table metadata in xml form. This works for current schema but not for other schemas. Is it a privilege problem?
my code is..
CREATE OR REPLACE FUNCTION TEST.F_DBEG2
RETURN XMLTYPE
AS
Handle NUMBER;
V_OUTPUT_TOTAL XMLTYPE;
V_CNT NUMBER := 0;
BEGIN
[code]....
but when i select the object of another schema, got output.
SELECT * FROM TEST_NEW.DEPT;
Which privilege i need?
View 9 Replies
View Related
Jan 12, 2012
Here i have one PL/SQL block which will returns the age of an employee using his id.
SET SERVEROUTPUT ON;
DECLARE
v_num NUMBER;
v_days NUMBER;
[code]...
It will returns an output of 27..I tried the same in Forms 6i using a text field and a button with a trigger "when_button_pressed". when i am entering the same id of employee i am getting a totally different answer
DECLARE
v_num NUMBER;
v_days NUMBER;
BEGIN
SELECT to_date(sysdate)-to_date(dob)
INTO v_num
FROM customer_details
WHERE application_id=:block3.day;
v_days :=floor(v_num/366);
MESSAGE(v_days);
MESSAGE(v_days);
END;
It is giving me a result of -73...i cleared my problem. but i cound not understand the internal work happening inside the forms and pl sql machine.
View 10 Replies
View Related
Jun 13, 2013
percentage_pointsmarksage95336.590346.575376.550496.595347903777549750337 if i fired the statementselect percentage_points from table1 where marks=33 and age=6.5 then output should beuser has score percentage between 90 and 95i can write case condition between 1 to 100 percentages but any other condition which easy
View 1 Replies
View Related
Dec 4, 2012
When I run the below procedure it does not return any data. But it returns stating Procedure created. When I just run the query it returns the result.
So what am I going wrong here.
set serveroutput on
CREATE OR REPLACE PROCEDURE PROD.STATUS_COUNTS
(
p_count IN OUT number,
p_status IN OUT varchar2,
p_mpp IN OUT number
)
AS
BEGIN
[Code]....
View 7 Replies
View Related
