I have a problem with my DB agent. it doesn't upload data correctly, so I can't see updated information in first page of EM ( it doesn't show cpu usage, Active Sessions, Listener properties,...). when I checked the logs, I found that emagent.trc shows this error: "exceed max amount of upload data: 77 files, 52M, disabling collections warn : collector : disable collector"
( I use Oracle Database 10g on Suse Linux 10.2)
My problem is that when i sign in on Enterprise Manager page ( URL.... ), i don't see that green up arrow that status is UP (and also those charts), but status: Agent unreachable: URL....
I tried to do what is specified in the Metalink(also here: URL.....), but the problem persists. And that metalink note (317242.1) applies to EM Grid Control (maybe that solution works for EM dbconsole also). So i don't have a Grid Control.I tried to stop dbconsole, then start it and then start upload agent ( emctl upload agent), but i got:
C:Documents and SettingsSorin>emctl upload agent
Oracle Enterprise Manager 11g Database Control Release 11.2.0.1.0
Copyright (c) 1996, 2010 Oracle Corporation. All rights reserved.
---------------------------------------------------------------
EMD upload error: Upload was successful but collections currently disabled - disk full
The agent status is:
C:Documents and SettingsSorin>emctl status agent
Oracle Enterprise Manager 11g Database Control Release 11.2.0.1.0
Copyright (c) 1996, 2010 Oracle Corporation. All rights reserved.
---------------------------------------------------------------
Agent Version : 10.2.0.4.2
OMS Version : 10.2.0.4.2
Protocol Version : 10.2.0.4.2
[code].....
The EM documentation does not work in this situation (and i specify this because sybrand_b has a problem with users who don't read the documentation.. ) However, i read here: URL....
"The agent collections will stop when the space on the disk is used beyond the default. Solution is to release the space on the disk."how to release space on the disk? What exactly means this? I have enough space on my D partition, where the Oracle product is. What should i do now? I want to see the EM page like this: URL....
For one of the server, we are able to start the agent but the status showing is UNKNOWN. So all the targets (50+) in Unknown state.
In the grid its in Blocked agent. We tried to unblock and did the Agent Resynchronization for this. At the end getting below error message as
Thread-9668 ERROR ThreadPool: Could not create thread, ERROR=12:Not enough space
In the emagent.log seeing below error
2010-11-12 21:03:48,950 Thread-9966 <Scheduler> Error Creating Thread for Upload Manager, OS threads exhausted (00951)
OS - AIX
DB Version - 10g
Agent version - 10g
cmd>emctl start dbconsole
while i run above command it gives following error. what should i do to make my EM run?
error:::EM Configuration issue. C:oracleproduct10.2.0db_1/Abhishek-PC_orcl not found .
I have used a HUAWEI dongle directly connected to my PC. First, the operating system and Oracle start up, then I connect to the internet using the Huawei Mobile Partner utility. Any application can connect to Oracle and use it correctly. All OK. Now I have added a 3G router which is connected to the PC by ethernet cable and has the Huawei dongle connected to a USB port on the router. All works correctly if I follow the sequence:
1) Start the PC with the router switched off, and wait until Oracle has fully started.
2) Power the router up and wait 2 minutes until Windows says the 100 Mb ethernet link is open. Oracle.exe in Task Manager is about 210 Mb, and sometimes more, depending on activity.
However, if I switch on the router first and then start the PC, Oracle does not start correctly. It rejects connection requests forever more, indicating Network Adapter could not establish the connection: Code 17002.In Task Manager Oracle.exe occupies only 145Mb. What can I do to get it to start correctly ? I can dig into Listener.ORA, TNSNAMES.ORA and HOSTS without any problems, and have often modified them manually (not the case here), but logs and traces escape me !
I am having a database running in my windows 2003 server and I want to configure Enterprise manager for that database to check the resource utilization during the peak hours and also the number of transactions...
View 1 Replies View Relatedi have already give the grant option cnnect,resource to scott but it is not connecting to enter prise manager console of Oracle database 11gR1. i am getting this error while connecting "The application requires more database privileges than you have currently been granted. Click on Help to get more version specific information"
when i am giving scott the dba rights then it is connecting. but i cann't give dba rights to scott.so, how/what is the specific command to give permission scott for connecting to enter prise manager console.
We have the Oracle Enterprise Manager Grid Control 10.2.0.5. We recently upgraded our Databases from 10.2.0.3 to 10.2.0.4 and since then we are having this problem.
Whenever i click an Agent on the Grid Control it gives me this error: "Communication between the Oracle Management Service host to the Agent host is unavailable. Any functions or displayed information requiring this communication link will be unavailable. For example: deleting/configuring/adding targets, uploading metric data, or displaying Agent home page information such as Agent to Management Service Response Time (ms)."
I get the same error when i try to configure a host or a database.
Don't know what is wrong
I need to create a new schedule to export schema every day for Oracle on Linux Server. I am using OEM, But in Job Schedule of Export Schedule I can not see the repeat option.
View 1 Replies View RelatedHow to start EM on windows 7?
View 3 Replies View RelatedI have an 11g data pump supplied by another party.I am on Windows 7(x64).I have experience using other databases, but not Oracle. The complexity of it all is a bit overwhelming...
I downloaded and installed [URL].I used the Database Configuration Assistant to create a database:
Template: Data Warehouse
Name/SID: database0
Password: password0
I then used the 'database0' Enterprise Manager:
Logged in as SYSTEM/password0 (Normal)
Import from Export Files
Entire Files
Host Credentials: myself (am Windows administrator)
All the rest defaults
The job appears to finish successfully.When I look at the schema (using razorsql), most tables seem to be there. However,a significant number are not. When I open data pump in a text editor, those missing tables are clearly there - definitions and data.When I look in the import.log, there are errors of the type:
error in creating database file '/db02/oradata/database0/stuff.dbf'
file create error, unable to create file
unable to open file
(OS 3) The system cannot find the path specified.
Failing sql is:
CREATE TABLESPACE "STUFF" DATAFILE '/db01/oradata/database0/stuff.dbf'
-- followed by the associated table creation errors.
So, does this mean that unix paths are hardcoded into the data pump, and is therefore incompatible with import into a Windows based system? Or are the paths symbolic, internal representations used by Oracle, and these errors are a symptom of an earlier, undisclosed problem?
The thing is, when I view the schema, the tablespace "STUFF" exists, just none of its tables.
I configured EM grid control(11g) and install agent.when I configured standby database by data guard I got error messages.examine and correct the following error(s), then re-try the operation.
Remote Operation Error - install_driver(Oracle) failed: Can't load '/home/oracle/Oracle/Middleware/agent11g/perl/lib/site_perl/5.10.0/x86_64-linux-thread-multi/auto/DBD/Oracle/Oracle.so' for module DBD::Oracle: /home/oracle/Oracle/Middleware/agent11g/lib/libnnz11.so: cannot restore segment prot after reloc: Permission denied at /home/oracle/Oracle/Middleware/agent11g/perl/lib/5.10.0/x86_64-linux-thread-multi/DynaLoader.pm line 203. at (eval 14) line 3 Compilation failed in require at (eval 14) line 3. Perhaps a required shared library or dll isn't installed where expected at
[code]....
Is there any document out there for OEM11gR2? Particulary how to configure/clean up unwanted old data within OEM repository.
View 1 Replies View Relatedi want to configure my present Data Guard Setup with Enterprise Manager...and on the Enterprise Manager grid control page i am not seeing any Data Guard option.....i am using oracle 10gR2 and Windows XP.
How to use enterprise manager for configuring Data Guard.
My problem is i install Oracle 9i enterprise edition 9.0.1.1.1 in windows xp professional but at the time of oracle database confiuration assistent it show me following errors it show:
Not a zip file(End header not found)
we have 5 database servers in different locations,
1.main database 10g(production) ip-192.1.1.1
2.standby for production 10g ip- 192.1.1.2
both are linux
3.another database 10g windows
4. another database 9i windows
both are in same location
5.new database 10g in linux ip-192.1.1.3
some other location
i m having a system windows xp installed
i m monitoring, all 10g by oracle enterpric manager
linux os monitor by Putty software
and i m monitoring below 10g database by sqlplus. now how could i monitor all the database by oracle enterprise manager grid control installed in my system that windows OS installed.
i have change my database name successful but after that when i open my enterprise manager i can open it but i cannot do anything in enterprise manager . i cannot show any tabs there.. i have attached my this enterprise manager login page here
View 12 Replies View RelatedI'm trying to install OMS on AIX and one of the prerequisites is JDK 1.6.0 SR6 but I couldn't find it in the IBM site, can some one tell me where can I download JDK 1.6.0 SR6?
View -1 Replies View RelatedI am trying to start enterprise manager without success. i used to work after installation of db 10g but do day when i run the command below it fails. also i donot see any thing useful in the logs that am being directed to directory /oracle/Ora10R2/Orahome/localhost.localdomain_dse/sysman/log
[oracle@cdsdb ~]$ emctl start dbconsole
Oracle Enterprise Manager 10g Database Control Release 10.2.0.2.0
Copyright © 1996, 2005 Oracle Corporation. All rights reserved.
http://localhost.localdomain:1158/em/conso...boutApplication
Starting Oracle Enterprise Manager 10g Database Control .....
[code]....
I have two databases on the same oracle 11g install. The first (ORCL) database uses the default port for EM (1158). However, I don't know what the second one uses. I go to the portlist.ini file, but it only has the entry for the default (ORCL) database.
View 3 Replies View RelatedI tried to start my oem managing but got the following error.
[oracle@Eagle2 ~]$ emctl start dbconsole
OC4J Configuration issue. /home/oracle/app/product/11.1.0/db_1/oc4j/j2ee/OC4J_DBConsole_Eagle_boomiedb not found.
How can I use OEM remotely?
my DB server is on 172.17.1.4 IBM-AIX
and my computer is 172.17.1.53
Because I am tired of using sqlplus :@
When i run EM ,in my explorer show these
SID = ORCL
instance is open agent is up but ...listener is down .my listener is active and run.... however i can connect to DataBase and execute DDL or DML transactions.How i could resolve it ?
I have install oracle 11g database enterprise edition But i cannot find the Oracle Enterprise Manager after the installation. i want the gui based Oracle Enterprise Manager i have access the the web base Oracle Enterprise Manager but not the gui based.how to use and download the GUI Based Oracle Enterprise Manager ....
View 1 Replies View Relatedwhen i install a db using the Assistant Configuartion Database i get no error exept this:
Enterprise manager configuration failed due to the following error - Listener is not up. Start the listener and run EM configuration again. Refer to the log file at C:\Oracle\cfgtoollogs\dbca\emConfig. Log for more details. You can retry configuring this database with Enterprise Manager later by manually running C:\Oracle\product\11.1.0\db_1\bin\emca script.
So I try lsnrctl start and i get:
C:\Windows\system32>lsnrctl start
LSNRCTL for 32-bit Windows: Version 11.2.0.1.0 - Production on 29-LUG-2013 10:26:25
Copyright © 1991, 2010, Oracle. All rights reserved.
TNS-01106: Il listener con nome LISTENER � stato gi� avviato
So I try lsnrctl status and i get:
C:\Windows\system32>lsnrctl status
LSNRCTL for 32-bit Windows: Version 11.2.0.1.0 - Production on 29-LUG-2013 10:23:34
Copyright © 1991, 2010, Oracle. All rights reserved.
Connessione a (DESCRIPTION=(ADDRESS=(PROTOCOL=IPC)(KEY=EXTPROC1521)))
[code]...
The file "server.xml" in E:\app\Andrea.Rimoldi\product\11.2.0\dbhome_1\oc4j\j2ee\OC4J_DBConsole\config\ does not exist...
Is there any way to retrieve or recover this file?
when I run the form and do some action intheform (call procedure , etc..) how can to see what is the process in running in OEM? Do it have any way to monitor it?
View 1 Replies View RelatedI am trying to install OEM but the GUI asks for weblogic server home.i checked many documents in net but none has weblogic installation procedure. Is it the sequence of installation ?
View 2 Replies View Relatedam trying to create a backup job in my UAT/testing instance, but with little success. I'm trying to create a backup job to disk (backup is to be stored in a drive local to the DB server) and it seems simple enough, but I keep getting the following error:
The job submission has failed for the following reason
ORA-06502: PL/SQL: numeric or value error: hex to raw conversion error ORA-06512: at "SYSMAN.DECRYPT", line 5 ORA-06512: at "SYSMAN.MGMT_CREDENTIAL", line 408 ORA-06512: at SYSMAN.MGMT_CREDENTIAL", line 1007 ORA-06512: at "SYSMAN.MGMT_CREDENTIAL", line 1400 ORA-06512: at SYSMAN.MGMT_JOBS", line 295 ORA-06512: at "SYSMAN.MGMT_JOBS", line 78 ORA-06512: at line 1
In "Recovery Settings", I have a "Flash Recovery Area Location" defined (path local to the DB -i.e. the server that the DB resides on), a "Flash Recovery Area Size" of 4 defined, and a Flashback Retention Time of 24 hours defined. Everything else is riding default values.
In "Backup Settings", there's nothing defined. Everything here is riding default values. As I understand it, not specifying a Disk Backup Location is fine so long as the Flash Recovery Area is defined. All the local services are turned on (scheduling, etc.).
If it's relevant, I mirrored the recovery/backup settings in UAT to the same as PROD, but changed what I needed to in order to accommodate the UAT environment (e.g. paths, etc.)
I want to manage my database remotely, through Internet. Is it possible to do that with OEM? Where can I find information related to this? Is there another monitoring software that allows me to perform this?
View 10 Replies View Relatedenctl is started but its status shows that EM Daemon is not running.What does it mean?And how can i reolve this error.
oracle@srv603484:~> emctl start dbconsole
TZ set to US/Pacific
Oracle Enterprise Manager 10g Database Control Release 10.2.0.1.0
Copyright (c) 1996, 2005 Oracle Corporation. All rights reserved.
[code]...
